Philips AC5660/30 ユーザーマニュアル

ブランド: Philips

モデル: AC5660/30

カテゴリー: 空気清浄機

タイプ: ユーザーマニュアル

1 2

Control buttons

Display panel

A B

4241 210 97822

AC5660

EN User manual 1 ZH-T 使用手冊 19

3’

1EN

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product overview (g.a) 5

Controls overview (g.b) 5

3 Getting started 6

Installing the lter 6

Wi-Fi connection 6

4 Using the air purier 7

Understanding the air quality light 7

Turning on and o 8

Changing the Auto mode setting 8

Changing the fan speed 9

Using the light on/o function 9

Switching the display indicator 9

Setting the child lock 10

5 Cleaning 10

Cleaning the body of the air

purier 10

Cleaning the air outlet cover 10

Cleaning the air quality sensor 11

Cleaning the pre-lter 11

6 Replacing the lters 12

Filter replacement indicator 12

Replacing the lter 12

7 Storage 13

8 Troubleshooting 14

9 Guarantee and service 17

Order parts or accessories 17

10 Notices 17

Electromagnetic elds (EMF) 17

Recycling 18

Notice 18

Environmental friendly paper used. Thanks for your contribution to save trees.

2 EN

1 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or flammable

detergent enter the

appliance to avoid electric

shock and/or a fire

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(flammable) detergent to

avoid electric shock and/

or a fire hazard.

• Do not spray any

flammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualified persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

• Make sure that foreign

objects do not fall into the

3EN

English

appliance through the air

outlet.

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum

output power of 31.62 mW

EIRP.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface.

• Leave at least 20cm free

space behind and on both

sides of the appliance

and leave at least 30cm

free space above the

appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injury.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all filters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips filters specially

intended for this

appliance. Do not use any

other filters.

• Combustion of the filter

may cause inreversible

human hazard and/or

jeopardize other lives. Do

not use the filter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

4 EN

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply first.

• Do not move the

appliance by pulling its

power cord.

• Always cleanse your

hands after changing the

filters.

• Do not insert your fingers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

fireplaces.

• Always unplug the

appliance after use

and before cleaning,

or carrying out other

maintenance or replacing

the filters.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

5EN

English

Controls overview (g.b)

Control buttons

H Power on/off button

I Light on/off button

J Auto mode button

K Fan speed button

L Child lock button

M Reset button

Display panel:

Sleep mode

Speed 1

Speed 2

Speed 3

Turbo mode

Filter replacement alert

Pre-filter cleaning alert

Wi-Fi indicator

Gas display

PM2.5 display

Indoor Allergen Index display

Pollution mode

Allergen mode

Bacteria & Virus mode

Child lock indicator

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Product overview (g.a)

A Control buttons

B Air outlet cover

C Air quality sensor

D Display panel

NanoProtect filter Pro S3

(FY5186)

F Pre-filter

G Side covers

6 EN

3 Getting started

Installing the lter

Remove all packaging of the filters

before using the appliance. Unpack

them and place them into the appliance

described as follows:

Note

• Make sure the air purifier is unplugged

from the electrical outlet before

installing the filters.

• Make sure the side of the filter with the

tag is pointing towards you.

1 Pull the top part of the side panel

to remove it from the air purifier

(fig.c).

2 Press the two clips down (1) and

pull the pre-filter towards you (2)

(fig.d).

3 Remove all filters (fig.e).

4 Remove all packaging materials

from the filter (fig.f).

5 Place the filter (FY5186) into the

air purifier. The model numbers are

shown on each filter (fig.g).

6 Attach the pre-filter back into the

air purifier (fig.h).

Note

• Make sure the side with the two clips

is pointing towards you, and that all

hooks of the pre-filter are properly

attached to the purifier.

7 Reattach the front panel by pressing

the top part of the panel onto the

top of the air purifier (1). Then,

gently push the panel against the

body of the air purifier (2) (fig.i).

8 Repeat the above steps and

assemble the filter for the other side

of the air purifier.

9 Wash your hands thoroughly after

installing filters.

Wi-Fi connection

Setting up the Wi-Fi connection

for the rst time

1 Download and install the 'Air

Matters' app the App Store or

Google Play.

2 Put the plug of the air purifier in the

power socket and touch to turn

on the air purifier.

» The Wi-Fi indicator blinks

orange for the first time.

3 Make sure that your mobile device

is successfully connected to your

Wi-Fi network.

4 Launch the 'Air Matters' app and

click on the ‘+’ on the top right of

the screen. Follow the onscreen

instructions to connect the air

purifier to your network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the 'Air Matters'

7EN

English

4 Using the air

purifier

Understanding the air

quality light

PM2.5

level

Air quality

light color

Air quality

level

≤12 Blue

Good

13-35 Blue-Purple

Fair

36-55 Purple-Red

Poor

>55 Red

Very poor

The air quality light automatically goes

on when the air purifier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

PM2.5

AeraSense sensing technology

accurately detects and quickly respond

to even the slightest particle change in

the air. It provides you with reassurance

with real-time PM2.5 feedback.

IAI

The professional-grade AeraSense

sensor detects the level of indoor air

allergen and with numerical feedback

from 1 to 12 the potential risk level of

indoor air allergens can be displayed. 1

indicates best air quality.

GAS

With an advanced as sensor, a display

ranging from L1 to L4 shows the density

level of potential harmful gases (incl.

VOC, odor, etc.) detected. L1 indicates

best air quality.

App for extensive and up-to-date

troubleshooting tips.

Note

• This instruction is only valid when

the air purifier is being set up for the

first time. If the network has changed

or the setup needs to be performed

again, consult section “Setting up the

Wi-Fi connection when the network

has changed” on page 7.

• If you want to connect more than one

air purifier to your smart device, you

have to do this successively. Complete

the set up of one air purifier before you

turn on the other air purifier.

• Make sure that the distance between

your mobile device and the air

purifier is less than 10 m without any

obstructions.

• This App supports the latest versions

of Android and iOS. Please check

www.philips.com/purifier-compatibility

for the latest update of supported

operating systems and devices.

Setting up the Wi-Fi connection

when the network has changed

Note

• This applies when the default network

to which your purifier is connected has

changed.

1 Put the plug of the air purifier in the

power socket and touch to turn

on the air purifier.

2 Touch and simultaneously for

3 seconds until you hear a beep.

» The air purifier goes to pairing

mode.

» The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting up

the Wi-Fi connection for the first

time" section.

8 EN

Turning on and o

Note

• Always place the air purifier on a

stable, horizontal, and level surface

with the front of the unit facing away

from walls or furniture.

• For optimum purification performance,

close doors and windows.

• Keep curtains away from the air inlet or

air outlet.

1 Put the plug of the air purifier in the

power socket.

2 Touch to switch on the air purifier

(fig.j).

» The air purifier operates under

the Pollution mode ( ) by

default.

» When the air purifier is warming

up, " " displays on the

screen.

» After 30 seconds, the air

purifier shows the PM2.5 level

on the screen. The air quality

sensor automatically selects

the appropriate air quality light

color. (fig.k).

3 Touch and hold for 3 seconds to

switch off the air purifier.

Note

• If the air purifier stays connected to

the electrical outlet after turning OFF,

the air purifier will operate under the

previous settings when turned ON

again.

Changing the Auto mode

setting

You can choose the Allergen mode

( ), the Pollution mode ( )or the

Bacteria & Virus mode ( ).

Pollution mode

The specially designed pollution

mode can effectively remove airborne

pollutants such as PM2.5.

• Touch the Auto mode button to

select Pollution mode (fig.l) .

» Auto ( ) and display on the

screen.

Allergen mode

The extra-sensitive allergen mode

is designed to react to even a small

change in allergen levels in the

surrounding air.

• Touch the Auto mode button to

select the Allergen mode (fig.m).

» Auto ( ) and display on the

screen.

Bacteria & Virus mode

The Bacteria & Virus mode boosts the

airflow to quickly reduce bacteria &

viruses.

• Touch the Auto mode button to

select the Bacteria & Virus mode

(fig.n).

» Auto ( ) and display on the

screen.

9EN

English

Turbo (t)

In turbo mode, the air purifier operates

on the highest speed.

• Touch the fan speed button to

select the turbo mode ( ) (fig.q).

» The " " displays on the screen.

» The turbo speed indicator

goes on.

Using the light on/o

function

With the light on/off button, you can

switch on or off the air quality light,

the display screen and the function

indicator if desired.

1 Touch the light on/off button

once, the air quality light will be

dimmed.

2 Touch the light on/off button

again, the air quality light will go off.

3 Touch the light on/off button for

the third time, all lights will be on

again.

Switching the display

indicator

The air purifier has three display

indicators, IAI index, PM2.5 index, and

Gas level.

Note

• The air purifier operates in PM2.5 index

by default.

1 Touch the light on/off button for

3 seconds to switch to IAI index

(fig.r).

» The IAI indicator and the actual

IAI index display on the screen.

Changing the fan speed

In addition to the Auto modes, there are

several fan speeds available.

When using the manual fan speed

settings, the purifier will still monitor the

air quality, but it will not automatically

adjust the fan speed if it detects

changes in the air quality.

Sleep mode ( )

In sleep mode, the air purifier operates

quietly at a very low speed.

• Touch the fan speed button to

select the sleep mode (SL) (fig.o).

» The " " displays on the

screen.

» The sleep mode indicator

goes on.

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (fig.p):

(Speed 1)

(Speed 2)

(Speed 3)

Tip

• If the air quality light lights up blue, it

indicates that the air quality is good,

and you can select a lower fan speed.

On the other hand, if the air quality light

lights up red-purple or red, it indicates

that the air quality is unhealthy, and you

can select a higher fan speed to purify

the air more quickly.

10 EN

5 Cleaning

Note

• Always turn the air purifier off and

unplug from the electrical outlet

before cleaning.

• Never immerse the air purifier in water

or any other liquid.

• Never use abrasive, aggressive, or

flammable cleaning agents such as

bleach or alcohol to clean any part of

the air purifier.

• Only the pre-filter is washable. The air

filters are not washable.

• Do not attempt to clean the filters or

air quality sensor with a vacuum.

Cleaning the body of the

air purier

Regularly clean the inside and outside

of the air purifier to prevent dust from

collecting.

1 Use a soft, dry cloth to clean both

the interior and exterior of the air

purifier.

2 The air outlet can also be cleaned

with a dry, soft cloth.

Cleaning the air outlet

cover

1 To unlock the air outlet cover, grab

the handle on the cover and pull

the cover up (fig.v).

2 Clean the cover with a brush

(fig.w).

3 To reattach the cover properly

(fig.x).

2 Touch the light on/off button for

3 seconds again to switch to PM2.5

index (fig.s).

» The PM2.5 indicator and the

actual PM2.5 index display on

the screen.

3 Touch the light on/off button for

3 seconds again to switch to Gas

level display (fig.t).

» The Gas indicator and the

actual Gas level display on the

screen.

Note

• It is possible that the air quality light

may still be red even if the PM2.5 index

is very low. It's normal. This is because

that at least one of the index ( the IAI

index or Gas level) is high that turns the

air quality light to red. The appliance

real-time displays the air quality index

with the highest risk.

Setting the child lock

1 Touch and hold the child lock

button for 3 seconds to activate

child lock (fig.u).

» The child lock icon displays

on the screen.

» When the child lock is on,

all the other buttons are not

responsive.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock.

» The child lock icon

disappears.

Note

• You can still control the appliance

through the App even child lock is

activated.

11EN

English

Cleaning the air quality

sensor

Clean the air quality sensor every

2 months for optimal functioning of the

purifier.

Note

• If the air purifier is used in a dusty

environment, it may need to be

cleaned more often.

• If the humidity level in the room is

very high, condensation may develop

on the air quality sensor and the air

quality light may indicate a poorer air

quality even though the air quality is

actually good. If this occurs, clean the

air quality sensor or use the air purifier

on a manual speed setting.

1 Clean the air quality sensor inlet

and outlet with a soft brush (fig.y).

2 Open the air quality sensor cover

(fig.z).

3 Clean the air quality sensor, the

dust inlet and the dust outlet with a

damp cotton swab (fig.{).

4 Dry all parts thoroughly with a dry

cotton swab.

5 Reattach the air quality sensor

cover (fig.|).

Cleaning the pre-lter

Clean the pre-filter when F0 is displayed

on the screen and the pre-filter cleaning

indicator is on (fig.}).

1 Switch off the air purifier and

unplug from the power socket.

2 Pull the top part of the side panel

to remove it from the air purifier

(fig.c).

3 Press the two clips down (1) and

pull the pre-filter towards you (2)

(fig.d).

4 If the pre-filter is very dirty, use a

soft brush to brush away the dust.

Then wash the pre-filter under

running tap water (fig.~).

5 Allow the pre-filter to air dry

thoroughly before placing back in

the air purifier.

6 Put the pre-filter back into the air

purifier (fig.h).

Note

• To optimize the lifetime of the pre-

filter, make sure it air dries completely

after cleaning.

• Wash your hands after handling the

filter.

• Make sure the side with the two clips

is pointing towards you, and that all

hooks of the pre-filter are properly

attached to the air purifier.

7 To reattach the front panel, press

the top part of the panel onto the

top of the air purifier (1). Then,

gently push the panel against the

body of the air purifier (2) (fig.i).

8 Put the plug of the air purifier in the

power socket.

9 Touch the button to switch on

the appliance.

10 Touch and hold the reset button

for 3 seconds to reset the pre-filter

cleaning time.

11 Wash your hands thoroughly after

installing filters.

12 EN

6 Replacing the

filters

Filter replacement

indicator

This air purifier is equipped with a

filter replacement indicator to make

sure that the air purification filter is in

optimal condition when the air purifier

is operating. When the filters need to be

replaced, the filter code displays on the

screen (see Filter alert chart).

If the filters are not replaced in time,

the air purifier will stop operating and

automatically lock to protect the air

quality in the room. Replace the filters

as soon as possible according to the

filter code.

Replacing the lter

Note

• The air filter is not washable or

reusable.

• Always turn off the air purifier and

unplug from the electrical outlet

before replacing the filters.

• Do not clean the filters with a vacuum.

• If the pre-filter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or contact

the Consumer Care Center in your

country.

Filter alert light

status

Action

A3 displays on the

screen and the

filter replacement

alert goes on

Replace the

NanoProtect

filter Pro S3

(FY5186)

1 Turn off the air purifier and unplug

from the power socket.

2 Take out the used air filter according

to the filter alert light status

displayed on the screen. Discard

used filter (fig.).

Note

• Do not touch the pleated filter surface,

or smell the filters as they have

collected pollutants from the air.

3 Remove all packaging material from

the new filter (fig.f).

4 Place the new filter into the air

purifier (fig.g).

5 Put the plug of the air purifier in the

power socket.

6 Touch and hold the reset button

for 3 seconds to reset the filter

lifetime counter.

Note

• Wash your hands after changing a filter.

• This air purifier has no other user-

serviceable parts. For assistance,

contact the Consumer Care Center in

your country.

13EN

English

7 Storage

1 Turn off the air purifier and unplug

from the power socket.

2 Clean the air purifier, air quality

sensor and pre-filter (see chapter

‘Cleaning’).

3 Let all parts air dry thoroughly

before storing.

4 Wrap the filters and pre-filters

separately in air tight plastic bags.

5 Store the air purifier, filters and pre-

filters in a cool, dry location.

6 Always thoroughly wash hands

after handling filters.

14 EN

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Center in your country.

Problem Possible solution

The air purier

does not work

even though it is

switched on.

• Check if the top cover is properly installed.

• The filter replacement light has been on continuously but

you have not replaced the corresponding filter. As a result,

the appliance is now locked. In this case, replace the filter

and reset the filter lifetime counter.

The airow that

comes out of

the air outlet

is signicantly

weaker than

before.

• The pre-filter is dirty. Clean the pre-filter (see chapter

"Cleaning").

The air quality

does not improve,

even though the air

purier has been

operating for a

long time.

• Check if the packing material is removed from the filters.

• One of the filters has not been placed in the air purifier or

a filter is not placed properly. Make sure that all filters are

properly installed in the following order, starting with the

innermost filter: 1) NanoProtect filter Pro S3 (FY5186);

2) pre-filter.

• The air quality sensor is wet. Make sure that the air quality

sensor is clean and dry (see chapter "Cleaning").

The color of the air

quality light always

stays the same.

• The air quality sensor is dirty. Clean the air quality sensor

(see chapter "Cleaning").

The air purier

produces a

unpleasant smell.

• The first few times you use the appliance, it may produce

a plastic smell. This is normal. However, if the appliance

produces a burnt smell, contact your Philips dealer

or an authorized Philips service center. The filter may

produce smell after being used for a while because of

the absorption of indoor air. Remove the filter and place

it where it has direct sunlight and ventilation for several

hours. Re-install and try using it again. If the odor remains,

please replace the filter.

The air purier is

loud.

• If the air purifier is too loud, change the fan speed to a

lower fan speed level. When using the air purifier in a

bedroom at night, choose the Sleep mode.

15EN

English

Problem Possible solution

The air purier still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the filter lifetime counter. Plug

in the air purifier, touch to switch on the air purifier, and

touch and hold the reset button for 3 seconds (see

Replacing the filters section).

Error code "E1"

displays on the

screeen.

• The motor has malfunctions. Contact the Consumer Care

Center in your country.

Error codes "E2",

"E3", "E4" or "E5"

displays on the

screen.

• The sensor has malfunctions. Contact the Consumer Care

Center in your country.

Which App I should

download?

• Please download and install the 'Air Matters' App

developed by Air Matters Network Pty Ltd from the App

Store or Google Play.

The Wi-Fi setup is

not successful.

• If the router your purifier is connected to is dual-band

and currently it is not connecting to a 2.4GHz network,

please switch to another band of the same router (2.4GHz)

and try to pair your purifier again. 5GHz networks are not

supported.

• Web authentication networks are not supported.

• Check if the purifier is within range of the Wi-Fi router. You

can try to locate the air purifier closer to the Wi-Fi router.

• Check if the network name is correct. The network name is

case-sensitive.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up the

Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by electromagnetic

or other interferences. Keep the appliance away from other

electronic devices that may cause interferences.

• Check if the mobile device is in airplane mode. Make sure

to have the airplane mode deactivated when connecting

to the Wi-Fi network.

• Consult the help section in the App for extensive and up-

to-date troubleshooting tips.

16 EN

9 Guarantee and service

If you need information or if you have a problem, please visit the Philips website at

www.philips.com or contact the Philips Consumer Care Center in your country (you find

its phone number in the worldwide guarantee leaflet). If there is no Consumer Care

Centre in your country, go to your local Philips dealer.

Order parts or accessories

If you have to replace a part or want to purchase an additional part, go to your Philips

dealer or visit www.philips.com/support.

If you have problems obtaining the parts, please contact the Philips Consumer Care

Center in your country (you can find its phone number in the worldwide guarantee

leaflet).

17EN

English

10 Notices

Electromagnetic elds

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

fields.

Compliance with EMF

Koninklijke Philips N.V. manufactures

and sells many products targeted at

consumers, which, like any electronic

apparatus, in general have the ability

to emit and receive electromagnetic

signals.

One of Philips' leading Business

Principles is to take all necessary health

and safety measures for our products,

to comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health effects. Philips

confirms that if its products are handled

properly for their intended use, they

are safe to use according to scientific

evidence available today.

Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments in

standardization for early integration in

its products.

Recycling

Do not throw away the product with

the normal household waste at the

end of its life, but hand it in at an

official collection point for recycling.

By doing this, you help to preserve the

environment.

Follow your country's rules for the

separate collection of electrical and

electronic products. Correct disposal

helps prevent negative consequences

for the environment and human health.

Notice

This Philips appliance and Air Matters

app applied multiple open source

softwares, Copies of open source

software license text used in this

product can be derived from website-

www.philips.com/purifier-compatibility.

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google

Inc.

18 EN

ページが読み込まれています...

Philips AC5660/30 ユーザーマニュアル

ブランド: Philips

モデル: AC5660/30

カテゴリー: 空気清浄機

タイプ: ユーザーマニュアル

PDFをダウンロードします

報告

他の言語で

English: Philips AC5660/30 User manual

Philips AC5660/30 ユーザーマニュアル

Philips AC5660/30 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント