LG PWKAUW01 Wearable Air Purifier Case 取扱説明書

MFL71753703

Rev.02_020921

www.lg.com

Owner’s Manual

Wearable

Read this owner’s manual thoroughly before operating the appliance and

keep it handy for reference at all times.

Air Purier Case

PWKAUW01

ENGLISH

TABLE OF CONTENTS

This manual may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY PRECAUTIONS

03 Using the Product

04 Storing the Product

UNPACKING

05 Components

05 Supplying Power

OPERATION

06 Appliance Overview

07 Power and Status Display

08 Inserting a Wearable Air Purifier or

Mobile Phone

09 Charging the Wearable Air Purifier

10 Beginning Operation and Changing

Mode

USING THE SMART

FUNCTIONS

12 Using the LG ThinQ Application

14 Guide to LG ThinQ App Functions

MAINTENANCE

15 Cleaning the Product

TROUBLESHOOTING

16 Before Calling for Service

APPENDIX

18 Product Specifications

18 Open Source Software Notice

Information

3

Please make sure to read the following safety precautions as they are de-

signed to prevent unexpected danger and damage.

These safety precautions are divided into two sections, Warning statements and

Caution statements.

WARNING:

Failure to follow the instructions laid down in this manual

may cause serious injury or death.

CAUTION:

Failure to follow the instructions laid down in this manual

may cause minor injury or product damage.

Using the Product

WARNING

• Do not use or charge the product when it is wet. If the

product has been submerged, stop using the product and

contact an LG Electronics Customer Information Center.

• Do not use or store firearms, combustibles or inflammables

near the product.

• Do not place magnetic material near the product’s status

indicator light. Doing so may cause a UVC LED malfunction

which may result in personal injury.

• Do not disassemble or damage the product or parts.

• Do not use the product for purposes other than its intended

purpose. Do not use the product when it is damaged.

– This device contains a UVC emitter which cannot be

replaced by consumers.

– Using the device in an unintended way may cause harm-

ful UVC emitter to leak.

• Do not come into contact with the UVC radiator or look

directly at the light (UV rays).

– Exposure to UVC radiation, even in very small amounts,

can harm eyes and skin.

• This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabili

-

ties, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning the use of

the appliance by a person responsible for their safety.

SAFETY PRECAUTIONS

4

Storing the Product

WARNING

• Do not place the product near a car window exposed to

direct sunlight or on top of an electric pad or heater.

• Do not place the product near a humid area such as a sauna,

a swimming pool or a bathroom.

• Children should be supervised to ensure that they do not play

with the appliance.

• Do not use in a vehicle or environment other than the given

service environment.

• If any abnormal noises, smells or smoke appear from

the product, immediately stop using the product, and

call an LG Electronics Customer Information Center.

• Do not allow the cable to be compacted by a heavy object,

bent forcibly, or damaged by a pet.

• The appliance must only be supplied at safety extra low volt-

age corresponding to the marking on the appliance.

• Before cleaning, turn the product off and unplug it.

• Do not allow foreign substances such as water, coffee or cola

to enter the product.

• Dispose of the packing materials safely so as to keep them out

of the reach of children.

CAUTION

• Do not clean the product with a strong detergent such as

a solvent.

• Avoid subjecting the product to severe impacts.

5

UNPACKING

Components

Wearable Air Purifier Case Power Cable

Supplying Power

The case requires an AC adapter (not included) to use.

• Connect the device and power cable to an AC adapter before use.

NOTE

• The appliance must only be supplied at safety extra low voltage corresponding

to the marking on the appliance from an AC adapter (5 V, 1.8 A or higher). The

AC adapter should be purchased separately. Use of an AC adapter lower than

1.8 A may cause the product to become inoperative or malfunction.

• When connecting to a vehicle USB port or a PC USB port, the current may

be lower than the outlet current, which may cause product failure.

The adapter is sold separately

6

Appliance Overview

Front View

a

Top Cover

b

Status Display

c

Power button

Rear View

a

Charging port

Inside

a

Wearable air purifier

and

mobile phone storage

b

UVC LED

c

Charging socket

d

Charging terminal

OPERATION

7

Power and Status Display

a

Power button

b

UVnano indicator light

c

Filter drying indicator light

d

Wearable air purifier charge indicator light

e

Wi-Fi operation light

8

Inserting a Wearable Air Purier or Mobile Phone

1

To open the product, hold the LG Puricare logo and the top cover.

2

Insert the wearable air purifier or mobile phone in the case as shown.

• Fold the wearable air purifier’s ear straps and hooks inward before inserting

it with the charging port on the left.

• Insert a mobile phone with the screen facing up.

NOTE

• Do not cover the left or right UVC LEDs of the product when inserting a

mobile phone. The Bacteria removal performance may be compromised.

1 2

Top Cover

Wearable air purier

Charging Port

UVC LED

9

Charging the Wearable Air Purier

The battery on the wearable air purifier can be charged while the wearable air

purifier is in the case.

1

Plug the charging socket into the charging port on the wearable air purier.

• The charging socket is located inside the case.

2

Connect the charging socket to the charging terminal in the case, and

plug in the case.

• When the charging socket is connected, the wearable air purifier charge indi-

cator light on the case shows the charging status of the wearable air purifier.

Color of Wearable Air Purifier

Charge Indicator Light

Charge Status

Green Charging completed

Red Charging in progress

NOTE

• The wearable air purifier requires approximately 2 hours to charge.

– The charging time of the wearable air purifier varies depending on the

usage environment.

– If the filter drying mode is running while the wearable air purifier is

charging, it may take longer to charge.

1

2

Charging Socket

CAUTION

The recommended temperature range for charging the wearable air purifier in the

case is 5 °C to 32 °C. Charging the wearable air purifier at a temperature outside

the recommended temperature range may reduce wearable air purifier life or

increase the charging time, and charging could be suspended for safety reasons.

10

Beginning Operation and Changing Mode

Press the Power button to begin operation. Press the Power button repeatedly

to change the operating mode.

• When the Power button is pressed, the product will turn on and operate in the

UVnano mode. Each time the Power button is pressed, the product operation

mode will change, from UVnano mode→Filter Drying mode→Product OFF.

• To turn on the Wi-Fi product connection mode, press and hold the Power

button for at least 3 seconds.

– The Wi-Fi connection status is indicated by the Wi-Fi operation indicator light.

Status of

Wi-Fi operation indicator light

Description

On Completion of Wi-Fi product registration

Flashing

Activation of Wi-Fi product registration mode

NOTE

• Before opening the Top Cover, press the Power button to turn the case off.

• If the top cover is opened, the product automatically stops operating and

disables the function.

• The Filter Drying mode operates when the wearable air purifier is connect-

ed to the charging socket and inserted in the case.

• If the Wi-Fi function does not connect after 7 minutes, the Wi-Fi operation

indicator light will turn off.

• For detailed information regarding the Wi-Fi function, refer to the Using the

Smart Functions section.

UVnano Mode

The UVnano mode removes bacteria from the surfaces of the wearable air

purifier or mobile phone using ultraviolet rays (UVC).

• It takes about 30 minutes to complete.

• The UVnano mode operating status is indicated by the UVnano indicator light.

11

Color of UVnano Indicator Light UVnano mode operating status

Green Completed

Red In progress

NOTE

• “UVnano” is a compound word derived from the words “UV” (ultraviolet

rays) and “nanometer” (unit of length).

• For details about the bacteria removal performance, refer to the product

information for the wearable air purifier case on the www.lg.com website.

• If the UVnano indicator light is flashing, contact an LG Electronics Custom-

er Information Center to set up service, as there may be a problem with

the bacteria removal performance.

Filter Drying Mode

The Filter Drying mode dries the filter and removes bacteria from the wearable

air purifier at the same time.

• The Filter Drying mode dries the filter using the fan on the wearable air purifier.

• It takes about 4 hours to dry the filter completely.

• The bacteria removal status for the wearable air purifier is indicated by the UVna-

no indicator light.

• The filter drying status is indicated by the filter drying indicator light.

Color of Filter Drying

Indicator Light

Description

Green Filter drying finished

Red Filter drying in progress

NOTE

• The Filter Drying mode operates when the wearable air purifier and the case

are connected via the charging socket.

• If the filter drying indicator light flashes, check the connection between the

wearable air purifier and charging socket, and between the charging socket

and the case.

12

Using the LG ThinQ Application

For easy access to detailed status information on the wearable air purifier and

wearable air purifier case, install the LG ThinQ application on a smartphone.

1

Turn off the data function of the smartphone.

• On an Android phone, turn off the mobile data.

• On an iOS phone, turn off the cellular data.

2

Connect the smartphone to Wi-Fi in the home.

• Do not choose a Wi-Fi network with “5G” in its name. The model

installed in the appliance only supports 2.4 GHz.

3

Search for and install the LG ThinQ app.

• On an Android phone, search for the LG ThinQ app in the Google Play

Store.

• On an iOS phone, search for the LG ThinQ app in the Apple App Store.

4

Once the app is installed on the smartphone, open the LG ThinQ app.

5

Log into the LG ThinQ app.

• Log in using an account that’s being used currently or create an LG

account to log in.

6

Press the add product button (+) and select the Wearable Air Purier Case.

• Follow the guide of the LG ThinQ app to connect the product.

USING THE SMART FUNCTIONS

13

NOTE

• To verify the Wi-Fi connection, check that the Wi-Fi operation indicator light

on the status display is lit.

• The appliance supports 2.4 GHz WiFi networks only. To check your

network frequency, contact your Internet service provider or refer to your

wireless router manual.

• LG ThinQ is not responsible for any network connection problems or any

faults, malfunctions, or errors caused by network connection.

• If the appliance is having trouble connecting to the Wi-Fi network, it may

be too far from the router. Purchase a Wi-Fi repeater (range extender) to

improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may be interrupted because of

the home network environment.

• The network connection may not work properly depending on the Internet

service provider.

• The surrounding wireless environment can make the wireless network

service run slowly.

• If the appliance cannot be connected due to problems with the wireless

signal transmission, unplug the charging cable and wait about a minute

before trying again.

• If the firewall on your wireless router is enabled, disable the firewall or add

an exception to it.

• The wireless network name (SSID) should be a combination of English

letters and numbers. (Do not use special characters.)

• Smartphone user interface (UI) may vary depending on the mobile operat-

ing system (OS) and the manufacturer.

• If the security protocol of the router is set to WEP, you may fail to set up

the network. Please change it to another security protocol (WPA2 is rec-

ommended) and connect the product again.

14

Guide to LG ThinQ App Functions

Providing Status Information

The PuriCare filter usage, accumulated time wearing the wearable air purifier,

operation status of the UVnano mode and Filter Drying mode, and the wearable air

purifier battery usage can all be checked.

NOTE

• If the wireless router, Internet Service Provider or password is changed,

delete the connected product from the LG ThinQ app and connect it again.

• The contents of this manual may vary according to different versions of the

LG ThinQ application and some contents are subject to change without

notice to users.

• Available functions may vary across models.

• For reasons not attributable to LGE’s negligence, the service may not

operate due to external factors such as, but not limited to, Wi-Fi unavail-

ability, Wi-Fi disconnection, local app store policy, or app unavailability.

• The feature may be subject to change without prior notice and may have a

different form depending on where you are located.

15

MAINTENANCE

Cleaning the Product

Cleaning the Product Exterior

Soak a soft cloth in water, squeeze it dry and use it to clean the exterior of the

product.

Cleaning the Product Interior

Clean the inside of the product with a soft, dry cloth.

CAUTION

• To prevent risk of product failure, fire, or an electric shock, do not allow water

to enter the product during cleaning.

• Do not clean the product with a strong detergent such as a solvent.

16

TROUBLESHOOTING

Before Calling for Service

If a failure occurs in the product, check the following before contacting the Service

Center.

Symptoms Solution

The appliance does not

operate.

• No power is supplied. Connect a suitable AC

adapter (5 V, 1.8 A) and check if the charging cable

is properly connected with reference to the Supply-

ing Power section.

• The top cover is not closed. Close the top cover.

The wearable air purifier

cannot be charged.

• The case and the wearable air purifier are not con-

nected. Check the connection between the wearable

air purifier and charging socket, and between the

charging socket and the case.

• No power is supplied. Connect a suitable AC

adapter (5 V, 1.8 A).

The filter drying indica-

tor light keeps flashing.

• The case and the wearable air purifier are not

connected. If the filter drying indicator light flashes,

check the connection between the wearable air

purifier and charging socket and between the

charging socket and the case.

17

Symptoms Solution

There is no Wi-Fi

connection.

• The router is turned off. Turn on the router.

• The smartphone’s automatic network connection

function is turned on. If there is an ‘automatic

mobile data switching,’ ‘smart network switch-

ing,’ ‘pass point’ or ‘no Internet use’ option in the

Advanced Options (“See more”) in mobile Wi-Fi

settings, uncheck the option. The option name

may differ depending on the manufacturer/mobile

carrier.

• The password for the Wi-Fi that you are trying

to connect to is incorrect. Find the Wi-Fi network

connected to your smartphone and remove it, then

register your appliance on LG ThinQ.

• Mobile data for your smartphone is turned on. Turn

off the Mobile data of your smartphone and register

the appliance using the Wi-Fi network.

• The wireless network name(SSID) is set incorrectly.

The wireless network name(SSID) should be a

combination of English letters and numbers. (Do

not use special characters.)

• The router frequency is not 2.4 GHz. Only a 2.4

GHz router to 2.4 GHz and connect the appliance to

the wireless router. To check the router frequency.

check with your internet service provider or the

router manufacturer.

• The distance between the appliance and the router

is too far. If the distance between the appliance and

the router is too far, the signal may be weak and

the connection may not be configured correctly.

Move the location of the router so that it is closer to

the appliance.

18

Product Specications

Appearance and specifications may vary without notice in order to improve the

quality of this product.

Product

Power 5 V

1.8 A (AC adapter)

Power input

7.7 W

Size (W×D×H) 216 mm x 128 mm x 105 mm

Recommended operat-

ing temperature range

5 °C ~ 32 °C

Recommended operat-

ing humidity range

15 % ~ 80 %

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source

licens es, that is contained in this product, please visit http://opensource.lge.

com. In addition to the source code, all referred license terms, warranty dis-

claimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a

charge covering the cost of performing such distribution (such as the cost of

media, shipping, and handling) upon email request to [email protected].

This offer is valid for a period of three years after our last shipment of this prod-

uct. This offer is valid to anyone in receipt of this information.

APPENDIX

MEMO

ページが読み込まれています...

LG PWKAUW01 Wearable Air Purifier Case 取扱説明書

このマニュアルも適しています

LG PWKAUW01 Wearable Air Purifier Case 取扱説明書

他の言語で

関連論文

その他のドキュメント