Philips AC3033/73 ユーザーマニュアル

AC3033

EN

User manual

3

ZH-T

使用手冊

23

Contents

1 Important �� 4

Safety ��4

Electromagnetic elds (EMF) ��6

Recycling ��6

Simplied EU declaration of conformity ��6

2 Your air purier �� 7

Product overview �� 7

Controls overview ��8

3 Getting started ��9

Installing the lter �� 9

Wi-Fi indicator ��9

Wi-Fi connection ��10

4 Using the air purier �� 11

Understanding the air quality light �� 11

Turning on and o �� 12

Changing the mode setting �� 12

Switching the display indicator �� 13

Using the light on/o function �� 13

Checking the lter status �� 14

5 Cleaning and maintenance �� 14

Cleaning schedule �� 14

Cleaning the body of the air purier �� 15

Cleaning the particle sensor �� 15

Cleaning the surface of the lter ��16

Replacing the lter ��17

Filter reset ��18

6 Storage �� 18

7 Troubleshooting �� 19

8 Guarantee and service ��22

Order parts or accessories �� 22

4 EN

1 Important

Safety

Read this user manual carefully before you use the appliance, and save it for

future reference�

Danger

• Do not clean the appliance with water, any other liquid, or a

(ammable) detergent, nor let them enter the appliance, to

avoid electric shock and/or a re hazard�

• Do not spray any ammable materials such as insecticides

or fragrance around the appliance�

Warning

• Check if the voltage indicated on the appliance corresponds

to the local power voltage before you connect the

appliance�

• If the power cord is damaged, you must have it replaced by

Philips, a service center authorized by Philips, or similarly

qualied persons in order to avoid a hazard�

• Do not use the appliance if the plug, the power cord, or the

appliance itself is damaged�

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved�

• Child shall not play with the appliance�

• Cleaning and maintenance shall not be made by children

without supervision�

• Do not block the air inlet and outlet, e�g� by placing items on

the air outlet or in front of the air inlet�

• Make sure that foreign objects do not fall into the appliance

through the air outlet�

5EN

Caution

• This appliance is not a substitute for proper ventilation,

regular vacuum cleaning, or use of an extractor hood or fan

while cooking�

• Always place and use the appliance on a dry, stable, level,

and horizontal surface�

• Leave at least 20cm free space around the appliance and

leave at least 30cm free space above the appliance�

• Do not sit or stand on the appliance� Do not place anything

on top of the appliance�

• Do not place the appliance directly below an air conditioner

to prevent condensation from dripping onto the appliance�

• Only use the original Philips lters specially intended for this

appliance� Do not use any other lters�

• Combustion of the lter may cause irreversible human

hazard and/or jeopardize other lives� Do not use the lter as

fuel or for similar purpose�

• Avoid knocking against the appliance (the air inlet and

outlet in particular) with hard objects�

• Do not insert your ngers or objects into the air outlet or the

air inlet to prevent physical injury or malfunctioning of the

appliance�

• Do not use this appliance when you have used indoor

smoke-type insect repellents or in places with oily residues,

burning incense, or chemical fumes�

• Do not use the appliance near gas appliances, heating

devices or replaces�

• Always unplug the appliance when you want to move, clean

appliance, replace the lter or carry out other maintenance�

• The appliance is only intended for household use under

normal operating conditions�

• Do not use the appliance in wet surroundings or in

surroundings with high humidity or high ambient

temperatures, such as the bathroom, toilet, or kitchen, or in

a room with major temperature changes�

6 EN

• The appliance does not remove carbon monoxide (CO)

or radon (Rn)� It cannot be used as a safety device in case

of accidents with combustion processes and hazardous

chemicals�

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations

regarding exposure to electromagnetic elds�

Recycling

Do not throw away the product with the normal household waste at the end

of its life, but hand it in at an ocial collection point for recycling� By doing

this, you help to preserve the environment�

Follow your country's rules for the separate collection of electrical and

electronic products� Correct disposal helps prevent negative consequences for

the environment and human health�

Simplied EU declaration of conformity

Hereby, Philips Consumer Lifestyle B�V� declares that the radio equipment type

AC3033 is in compliance with Directive 2014/53/EU� The full text of the EU

declaration of conformity is available at the following internet address:

www�philips�com�

7EN

2 Your air purifier

Congratulations on your purchase, and welcome to Philips!

To fully benet from the support that Philips oers, register your product at

www�philips�com/welcome�

Product overview

Control panel

Air outlet

Back

cover

NanoProtect lter

Series 3 (FY3430/30)

Particle sensor

Gas sensor

8 EN

Controls overview

Control buttons

Filter status/reset

button

Display switch button

Power on/o button Mode switch button

Light on/o button

Display panel

Wi-Fi indicator Auto mode

Turbo mode Sleep mode

Indoor Allergen Index

display

PM2�5 display

Gas pollution display

Filter cleaning alert

Filter replacement alert

9EN

3 Getting started

Installing the lter

Remove all packaging of the lter before rst use�

Note: Make sure the air purier is unplugged from the electrical outlet before

installing the lter�

1 2 3 4 5

1 Pull the back cover and remove it from the appliance�

2 Pull the lter from the appliance�

3 Remove all packaging materials of the air purication lter�

4 Put the lter back into the appliance�

5 Reattach the back cover�

Wi-Fi indicator

Wi-Fi icon status Wi-Fi connection status

Blink in orange Connecting to the smartphone

Stable in orange Connected to the smartphone

Blink in white Connecting to the server

Stable in white Connected to the server

O Wi-Fi function disabled

10 EN

Wi-Fi connection

Setting up the Wi-Fi connection for the rst time

1

Download and install the Philips "Clean Home+" app from the

App Store or Google Play.

2 Put the plug of the air purier in the power socket and touch

to turn on the air purier.

» The Wi-Fi indicator blinks orange for the rst time.

3 Make sure that your smartphone or tablet is successfully connected to

your Wi-Fi network.

4 Launch the "Clean Home+" app and click on "Connect a New Device"

or press the "+" button on the top of the screen. Follow the onscreen

instructions to connect the air purier to your network.

Note:

• This instruction is only valid when the air purier is being set up for the rst

time. If the network has changed or the setup needs to be performed again,

see Chapter "Reset the Wi-Fi connection" on page 10.

• If you want to connect more than one air purier to your smartphone or

tablet, you have to do this one by one.

• Make sure that the distance between your smartphone or tablet and the air

purier is less than 10 m without any obstructions.

• This App supports the latest versions of Android and iOS. Please check

www.philips.com/cleanhome for the latest update of supported operating

systems and devices.

Reset the Wi-Fi connection

Note:

• Reset the Wi-Fi connection when your default network has changed.

1 Put the plug of the air purier in the power socket and touch to turn on

the air purier.

2 Touch and simultaneously for 3 seconds until you hear a beep.

» The air purier goes to pairing mode.

» The Wi-Fi indicator blinks orange.

3 Follow the steps 3-4 in "Setting up the Wi-Fi connection for the rst time"

section.

11EN

4 Using the air purifier

Understanding the air quality light

The air quality light automatically

goes on when the air purier is

switched on, and lights up all colors

in sequence� After approximately

30 seconds, the particle sensor

selects the color that corresponds to

the surrounding air quality of airborne

particles�

The color of the air quality light is determined by the highest risk index among

PM2�5, IAI and Gas readings�

IAI

The professional-grade AeraSense sensor

detects the level of indoor air allergen and

with numerical feedback from 1 to 12 the

potential risk level of indoor air allergens can

be displayed� 1 indicates best air quality�

PM2�5

AeraSense sensing technology

accurately detects and quickly

responds to even the slightest

particle change in the air� It provides

you with reassurance with real-time

PM2�5 feedback�

Most of the indoor air pollutants

fall under PM2�5 – which refers to

airborne particle pollutants smaller than 2�5 micrometers� Common indoor

sources of ne particles are tobacco smoke, cooking, burning candles� Some

airborne bacteria and the smallest mold spores, pet allergen and dust mite

allergen particles also fall under PM2�5�

GAS

With an advanced gas sensor, a display

ranging from L1 to L4 shows the level change

of potential harmful gases (incl� VOC, odor,

etc�) detected� L1 indicates best air quality�

Air quality light color Air quality level

Blue Good

Blue-purple Fair

Purple-red Poor

Red Very poor

IAI level Air quality light color

1-3 Blue

4-6 Blue-purple

7-9 Purple-red

10-12 Red

PM2�5 level Air quality light color

≤12 Blue

13-35 Blue-purple

66-55 Purple-red

>55 Red

Gas level Air quality light color

L1 Blue

L2 Blue-purple

L3 Purple-red

L4 Red

12 EN

Turning on and o

Note:

• For optimum purication performance, close doors and windows�

• Keep curtains away from the air inlet or air outlet�

1 Put the plug of the air purier in the power socket�

2 Touch to switch on the air purier�

» The air purier beeps�

» The " " displays on the screen during warming

up� Then the air purier shows the IAI/PM2�5/

Gas level after measuring the air quality�

» The air purier operates in the auto mode with

IAI displayed on the screen�

3 Touch and hold the button for 3 seconds to

switch o the air purier�

Note: If the air purier stays connected to the electrical outlet after turning

OFF, the air purier will operate under the previous settings when turned ON

again�

Changing the mode setting

You can choose Auto mode, Turbo mode or the Sleep mode by touching the

button�

Auto mode ( ): In Auto mode, the dual-sensor sense the air quality

in real-time and the appliance automatically adjusts the fan speed in

accordance with the ambient air quality, the control panel can automatically

adjust display screen brightness according to the ambient light�

Turbo mode ( ): In Turbo mode, the air purier operates on the highest

speed�

Sleep mode ( ): In Sleep mode, the air purier operates quietly at a low

speed� After 3 seconds, the screen lights o�

13EN

Switching the display indicator

Note: The appliance displays IAI level by default�

• Touch the button to switch display indicator among IAI/PM2�5/Gas�

Using the light on/o function

With

the light sensor, the control panel can automatically turn on, turn o or

dim according to the ambient light� The control panel will be o or dim when the

ambient light is dark� You can touch any button to wake up all lights� Then, if no

further operation, all lights will be o or dim again to match with the ambient

light�

You can touch the light on/o button

manually to turn o all lights and the

control pa

nel� Touch any button to wake up all lights�

14 EN

Checking the lter status

• Touch the lter status check/reset button to check the lter service life

status�

» The percentage of remaining service life of the lter displays on the

screen�

Icon color Filter life indication Display (%)

Blue Optimal service life 16-100

Blue-purple Good service life 9-15

Purple-red

Service life almost

reaches the end

4-8

Red

Service life ends,

replace the lter

0-3

Note: The appliance goes back to normal display if no operations after

3 seconds�

5 Cleaning and maintenance

Note:

• Always unplug the appliance before you clean it�

• Never immerse the appliance in water or any other liquid�

• Never use abrasive, aggressive, or ammable cleaning agents such as

bleach or alcohol to clean any part of the appliance�

• Never use any liquids (including water) to clean the lter�

• Do not attempt to clean the particle sensor and gas sensor with a vacuum�

Cleaning schedule

Frequency Cleaning method

When necessary

Wipe the fabric part of the appliance with a damp

cloth, wipe the plastic part of the appliance with a

soft, dry cloth

Clean the air outlet cover

Every two months Clean the particle sensor with a dry cotton swab

The displays

on the screen

Clean the surface of the lter

15EN

Cleaning the body of the air purier

Regularly clean the inside and outside of the air purier to prevent dust from

collecting�

1 Wipe the fabric surface gently with a damp cloth�

2 Use a soft, dry cloth to clean both the interior and exterior of the air

purier and the air outlet�

Note:

• The fabric covered on the appliance can not be removed�

• Do not use hot water, alcohol, harsh cleaners to clean the fabric�

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the

appliance�

Note:

• If the air purier is used in a dusty environment, it may need to be cleaned

more often�

• If the humidity level in the room is very high, condensation may develop

on the particle sensor and the air quality light may indicate a more poor air

quality even though the air quality is actually good� If this occurs, clean the

particle sensor�

• The gas sensor doesn’t need to be cleaned�

1 Switch o the air purier and unplug from the power socket�

2 3 5

2 Pull the back cover and remove it from the appliance�

3 Clean the particle sensor with a damp cotton swab�

4 Dry all parts thoroughly with a dry cotton swab�

5 Reattach the back cover�

16 EN

Cleaning the surface of the lter

Filter alert light status Action

The lter cleaning

alert

displays on the

screen

Clean the surface of

the lter with a vacuum

cleaner

1 Switch o the air purier and unplug from the power socket�

2

3 4 5 6

2 Pull the back cover and remove it from the appliance�

3 Pull the lter from the appliance�

4 Clean the surface of the lter with a vacuum cleaner�

5 Put the lter back into the appliance�

6 Reattach the back cover�

7 Put the plug of the air purier in the power socket�

8 Touch the button to switch on the appliance�

9 Touch and hold the lter status check/reset button for 3 seconds to

reset the lter cleaning time�

10 Wash your hands thoroughly after cleaning the lter�

17EN

Replacing the lter

Understanding the healthy protection lock

This air purier is equipped with a lter replacement indicator to make sure

that the air purication lter is in optimal condition when the air purier is

operating� When the lter need to be replaced, the lter replacement alert

lights up red�

If the lter is not replaced in time, the air purier will stop operating and

automatically lock to protect the air quality in the room� Replace the lter as

soon as possible�

Replacing the lter

Note:

• The lter is not washable or reusable�

• Always turn o the air purier and unplug from the electrical outlet before

replacing the lter�

Filter alert light status Action

The lter replacement

alert

lights up

Replace the NanoProtect

lter Series 3 (FY3430/30)

1 Switch o the air purier and unplug from the power socket�

2

3 4 5 6

2 Pull the back cover and remove it from the appliance�

3 Pull the lter from the appliance�

4 Remove all packaging materials of the air purication lter�

5 Put the lter back into the appliance�

6 Reattach the back cover�

18 EN

7 Put the plug of the air purier in the power socket.

8 Touch the button to switch on the appliance.

9 Touch and hold the lter status check/reset button for 3 seconds to

reset the lter lifetime counter.

10 Wash your hands thoroughly after replacing the lter.

Note: Do not smell the lter as it has collected pollutants from the air.

Filter reset

You can replace the lter even before lter replacement

alert ( ) displays on the screen. After replacing a lter,

you need to reset the lter lifetime counter manually.

1 Touch the power button for 3 seconds to turn o

the appliance and unplug from power socket.

2 Put the power plug in the power socket.

3 Within 15 seconds after power on, touch and hold

and button for 3 seconds to reset the lter lifetime

counter.

6 Storage

1 Turn o the air purier and unplug from the power socket.

2 Clean the air purier, particle sensor and the surface of the lter (see

chapter "Cleaning and maintenance").

3 Let all parts air dry thoroughly before storing.

4 Wrap the lter in air tight plastic bags.

5 Store the air purier, lter in a cool, dry location.

6 Always thoroughly wash hands after handling lters.

3’

+

19EN

7 Troubleshooting

This chapter summarizes the most common problems you could encounter

with the appliance� If you are unable to solve the problem with the information

below, contact the Consumer Care Center in your country�

Problem Possible solution

The appliance

does not work

properly�

• Check if the back cover is properly installed�

• The lter replacement alert has been on continuously

but you have not replaced the corresponding lter� As a

result, the appliance is now locked� In this case, replace

the lter and long press

to reset the lter lifetime

counter�

The airow that

comes out of

the air outlet

is signicantly

weaker than

before�

• The surface of the lter is dirty� Clean the surface of the

lter (see the chapter "Cleaning and maintenance")�

The air quality

does not improve,

even though the

appliance has

been operating

for a long time�

• Check if the packing material is removed from the lter�

• The lter has not been placed in the appliance� Make

sure that the lter (FY3430/30) is properly installed�

• The particle sensor is wet� The humidity level in your

room is high and causes condensation� Make sure that

the particle sensor is clean and dry (see the chapter

"Cleaning and maintenance")�

• Room size is large or the outdoor air quality is poor�

For optimum purication performance, please close the

doors and windows when operating the air purier�

• There are indoor pollution resources� For instances,

smoking, cooking, incense, perfume or alchohol�

• Filter reaches the end of life� Replace the lter with a

new one�

The color of the

air quality light

always stays the

same�

• The particle sensor is dirty� Clean the particle sensor

(see the chapter "Cleaning and maintenance")�

20 EN

Problem Possible solution

The appliance

produces a

strange smell�

• The rst few times you use the appliance, it may

produce a plastic smell� This is normal� However, if the

appliance produces a burnt smell even if removing

lters, contact your Philips dealer or an authorized

Philips service center� The lter may produce smell after

being used for a while because of the absorption of

indoor gases� It’s recommended that you reactivate the

lter by putting it in direct sunlight for repeated use� If

odor still exists, replace the lter�

The appliance is

extra loud�

• It's normal if the appliance runs at the Turbo mode�

• In the Auto mode, if the appliance is too loud, maybe

the appliance runs at high speed because air quality

becomes worse, or your personalized setting in App

triggers a higher fan speed� You can choose the Sleep

mode, or change the settings in the App�

• If anything drops into air outlet, it may also cause

abnormal loud sound� Immediate turn o appliance,

turn appliance upside down, to get foreign objectives

out of appliance�

• If there is abnormal sound, contact the Consumer Care

Center in your country�

The appliance still

indicates that I

need to replace a

lter, but I already

did�

• Perhaps you did not reset the lter lifetime counter�

Switch on the appliance� Then touch and hold the reset

button (

) for 3 seconds�

Error code "E1"

displays on the

screen�

• The motor has malfunctions� Contact the Consumer

Care Center in your country�

ページが読み込まれています...

Philips AC3033/73 ユーザーマニュアル

Philips AC3033/73 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント