10
English
Basic Features
Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
In PC mode, you can only make changes to Gamma
and White Balance.
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Gamma: Adjust the primary colour intensity.
Colour Space (Auto / Native): Adjust the range of
colours available to create the image.
White Balance: Adjust the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each
colour’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s
(red, green, blue) brightness.
Reset: Resets the White Balance to it’s default
settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object
boundaries.
Picture Options
In PC mode, you can only make changes to the Colour
Tone and Size.
¦
✎
■
■
■
■
■
■
■
✎
Colour Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 is only activated when the
picture mode is Movie.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.
You can select these options simply
by pressing the P.SIZE button on the
remote control.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Position or Size by using ▲, ▼ button.
4:3 : The default setting for a movie or normal
broadcasting.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i ) or Component (1080i) signals
are inputted.
NOTE
After selecting Screen Fit in HDMI (1080i) or
Component (1080i) mode: Adjusts the Position or
Size by using▲, ▼, ◄, ► button.
Depending on the input source, the picture size
options may vary.
The available items may differ depending on the
selected mode.
In PC mode, only 16:9 and 4:3 modes can be
adjusted.
Settings can be adjusted and stored for each
external device connected to an input of the TV.
If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■
✎
✎
■
✎
✎
✎
✎
Black Tone : Off
Dynamic Contrast : Medium
Gamma : 0
Colour Space : Native
White Balance : Off
Flesh Tone : 0
Edge Enhancement : On
Advanced Settings
T V
U Move E Enter R Return
Colour Tone : Normal
Size : 16:9
Digital Noise Filter : Off
HDMI Black Level : 16:9
Film Mode : Off
Picture Options
T V
U Move E Enter R Return
P.SIZE
HDMI
P
POWER
P.MODE
CH LIST
MEDIA.P
SLEEP
BN68-02683L_00.indb 10 2010-03-18 오후 4:00:33