Philips 32PF5320/98 取扱説明書

LCD TV

26PF5320

32PF5320

32PF7320

1

Contents

Thank you for purchasing this television set.

This handbook has been designed to help you install and operate your TV set.

We would strongly recommend that you read it thoroughly.

Table of Contents

Important information

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Installation

Presentation of the LCD TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Remote Contol Buttons for LCD TV Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-5

Installing your LCD TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Remote Contol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Selecting the Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Automatic Installation of TV programmes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Sorting of Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Naming of Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Editing of Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Manual Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Operation

Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Feature Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Timer Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Child Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Using the Active Control Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

PIP Feature

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Screen Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Using the Teletext

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Smart Picture and Sound Feature

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Using the TV as a PC Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Using in HD (High Definition) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Practical information

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

2

Safety Information

• Disconnect mains plug when:

– the red light below the TV screen is flashing continuously.

– cleaning the TV screen. Never use abrasive cleaning agents.

– there is a lightning storm.

– the set is left unattended for a prolonged period of time.

• No naked flame sources, such as lighted candles, should be placed on top of the TV or in

the vicinity.

• Do not place your TV set under direct sunlight or heat.

• Leave at least 5 cm around each side of TV set to allow for proper ventilation.

• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or

water.

• No objects (such as vases) filled with liquids should be placed on top the TV so as to

avoid dripping or splashing of liquids on the set.

• Do not shift or move the set around when it is switched on.

• Do not touch, push or rub the surface with hard object.

• When the surface becomes dusty, wipe gently with absorbent cotton or other soft

materials like chamois. Do not use acetone, toluene and acohol as it causes chemical

damage to the polarizer.

• Wipe off saliva or water droplets as soon as possible. Long time contact with polarizar

causes deformations and colour fading.

• Be careful of condensation at sudden temperature change. Condensation does damage to

polarizar or electrical contact parts. After condensation fades, smear or spot will occur.

• Installation of the LCD TV on the wall should be carried out by qualified servicemen.

Improper and incorrect installation may render the set unsafe,

Recycling

The materials used in your set are either reusable or can be recycled.

To minimise environmental waste, specialist companies collect used

appliances and dismantle them after retrieving any materials that can be

used again (ask your dealer for further details).

3

Presentation of the LCD TV

LCD TV buttons:

• POWER: to switch the TV on or off.

• VOLUME –/+: to adjust sound level.

• MENU: to access or close menus.

The PROGRAM –/+ buttons can be

used to select an adjustment and the

VOLUME –/+ buttons to make that

adjustment.

• PROGRAM –/+: to select

programmes.

Rear of set

The main connections are made at the

bottom and the rear of the LCD TV.

For more details on connections see Quick Use

Guide.

Power socket

HDMI/PC-D*: HDMI input for

connecting a HD (high definition)

equipment or computer (equipped with

DVI output connected with a DVI to

HDMI cable).

PC-VGA/CVI-2*: VGA for connecting

to a computer with VGA output. You

can also use a Component Video to

VGA adaptor to connect to a HD (high

difinition) equipment.

PC AUDIO IN: Audio input for

connecting computer/equipment with

audio output.

AV*: AUDIO VIDEO IN and SVHS

sockets.

AUDIO OUT and VIDEO OUT

sockets.

CVI-1*: for connecting equipment with

Component Video and Audio output.

TV aerial socket.

L Headphone jack.

REAR/SVHS*: allow for connections

for items such as cameras or gaming

stations.

*Press the

AV button on the remote control to

display the Source List menu and select TV or

connected peripheral equipment.

4

Remote Control Buttons for LCD TV Functions

1)

(STANDBY)

To set the TV to standby mode. To switch the TV

set on again, press P –/+ or 0 to 9 buttons or AV

button.

2) Pixel + (only available on certain models/

versions)

Switches the Pixel + demonstration mode on or off.

3) ®

I

Ò ‡ π †

I

º

Peripheral device buttons

(Refer to “Mode selector” on page 5)

4) Q Surround mode

To activate / deactivate the surround sound effect.

In stereo, this gives the impression that the speakers

are further apart. For models equipped with Virtual

Dolby Surround*, you can experience Dolby

Surround Pro Logic sound effects.

5) AV

To display Source List to select TV or peripheral

equipment connected to TV, AV, REAR/SVHS,

CVI-1(SD/HD), CVI-2(SD/HD), HDMI, PC-VGA, or

PC-D (Quick Use Guide).

6) h Active control

Optimizes the picture quality depending on the

quality of the incoming signal and the ambient light

conditions.

7) MENU

To call up or exit the TV menus.

8) Cursor

These 4 buttons are used to navigate around the

menus ( ÎïÍÆ ).

9) Volume

To adjust the sound level.

10) Smart picture and sound

Used to access a series of predefined picture and

sound settings.

11) Screen information

To display/remove the programme number, the time,

the sound mode and the time remaining on the timer.

Hold down for 5 seconds to permanently display the

programme number on the screen.

*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbols are

trademarks of Dolby Laboratories.

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

5

Remote Control Buttons for LCD TV Functions

12) Mode*

Press this button to switch between TV, DVD or

AUX.

13) PIP on/off (refer to page 12)

14) List of programmes

To display / clear the list of programmes. Use

the buttons Îï to select a programme and the

button Æ to display it.

15) Screen Format (refer to page 13)

16) Sound mode

Used to force programmes in Stereo and Nicam

Stereo to Mono or, for bilingual programmes, to

choose between Dual5or Dual6.

The

Mono indication is red when in forced position.

17) Teletext (refer to page 14)

18) OK

Confirms selection (For DVD/AUX mode only)

19)

(Mute)

Press to mute or restore sound.

20) P –/+ Selecting TV programme

To move up or down a programme. The number

and the sound mode are displayed for a few

seconds.

For some TV programmes the title of the programme

appears at the bottom of the screen.

21) 0/9 Numerical buttons

For direct access to programmes. For a 2 digit

programme number, the 2

nd

digit must be entered

before the dash disappears.

22) Previous Programme

To access the previously viewed programme.

*Mode selector

The remote control allows you to control the main functions of SOME Philips DVD or VCR

models only. Note : Not available to Philips DVD-R

Press the

MODE button to select the required mode: DVD or AUX.

The remote control indicator lights up to display the selected mode. It switches off automatically

after 20 seconds if left idle. The remote control automatically returns to TV mode.

The following buttons are operational, depending on the equipment:

B X

®

I

Ò ‡ π †

I

º OK MENU ÎïÍÆ (cursor) P –/+ 0/9 Ë Á

(12

(13

(14

(15

(16

(17

(18

(19

(20

(21

(22

6

Installing your LCD TV

Positioning the television set

Place your TV on a solid stable surface.

To avoid danger do not expose the TV

to water, or heat source (e.g. lamp,

candle, radiator). Do not obstruct the

ventilation grid at the rear.

Connecting the aerials

• Use the aerial connection lead and

connect the

: socket situated at

the bottom of the TV to your aerial

socket.

• Connect the power lead to the

television and the mains plug into the

wall socket (220-240 V 50/60 Hz).

For connecting other appliances see page

Quick Use Guide.

Switching on

To switch on the set, press the

POWER button. A green indicator

comes on and the screen lights up. Go

straight to the Quick Installation chapter.

If the TV remains in standby mode

(red indicator), press the P –/+ on the

remote control.

The indicator will flash when you use the

remote control.

Remote Control

Pull out the plastic insulation sheet from the

battery, this will activate the remote control.

The battery supplied with the appliance does

not contain mercury or nickel cadmium so

as to protect the environment. Please do

not discard your used batteries, but use the

recycling methods available (consult your

distributor).

7

Sorting of Programme

Sort feature allows you to change the

channel number to another channel number

for a particular TV station.

Press the MENU button.

Use the Î/ï button on the remote

control to select

Install and press the Æ

button to access

Install menu.

Before you proceed to do the

Automatic

Installation of TV Programmes, select

the menu

Language of your choice.

Press the MENU button. The TV Menu

is displayed on the screen.

Use the Î/ï button on the remote

control to select the

Install.

Press the Æ button to access the Install

menu (

Language is highlighted).

Select your language using the Í/Æ

button.

To exit the menu, press

Ë button.

TV Menu

Picture

Sound

Features

Install

Language

Auto Store

Manual Store

Sort

Name

Channel Edit

0

1

2

4

5

Æ

Æ ·

·

3

TV Menu

Picture

Sound

Features

Install

Language

Auto Store

Manual Store

Sort

Name

Channel Edit

English

Æ

TV Menu

Picture

Sound

Features

Install

Language

Auto Store

Manual Store

Sort

Name

Channel Edit

Start?

Æ

Selecting the Menu Language

Press the MENU button. The TV Menu

is displayed on the screen.

Use the Î/ï button on the remote

control to select the

Install and press Æ

button to access Install menu.

Press ï button repeatedly until Auto

Store is selected.

Press Æ button to start automatic tuning

of TV programmes. When the automatic

tuning is completed, the Install menu is

displayed.

To exit or interrupt the search, press

MENU.

To exit the menu, press

Ë button.

Automatic Installation of TV Programmes

Press ï button repeatedly until Sort is

selected.

Select the programme you want to sort

using the

Î/ï button and press Æ to

enter sorting mode (the arrow points to

the left).

Then use the cursor Î/ï button to

select the new number and press the

Í button to activate sorting mode (the

arrow how points to the right and

sorting is completed).

Repeat steps and for each

program you wish to re-number.

To exit the menus, press

Ë button.

8

Name feature allows you to enter a name

for any channel you select.

Press the MENU button.

Use the Î/ï button on the remote

control repeated until

Install is selected

and press the

Æ button to access Install

menu.

Press ï button repeatedly until Name

is selected and press

Æ button to access

name mode.

Use the Î/ï button to key in first

character. Use the

Æ button to move to

next character slot. (You can key up to a

maximum of 5 characters).

To store name, press the

Æ button

repeatedly until you exit name mode.

The name is now indicated at the top left

hand corner of the screen.

To exit the menu, press

Ë button.

TV Menu

Picture

Sound

Features

Install

Language

Auto Store

Manual Store

Sort

Name

Channel Edit

E L L I E

Æ

2

Naming of Channel

Channel Edit feature allows you to edit or

skip programmes which have bad or weak

TV signal or programme that you do not

watch often.

Press the MENU button.

Use the Î/ï button on the remote

control repeated until

Install is selected

and press the

Æ button to access Install

menu.

Press ï button repeatedly until

Channel Edit is selected and press

Æ button to access the Channel Edit

menu.

Use the Í/Æ button or Digit (0 - 9)

button to select channel you want to

skip.

Press the

ï button to select skipped and

use the

Í/Æ button to select On option

to activate skipping of channel.

To exit the menu, press

Ë button.

Restoring skipped channels

To restore skipped channels :

- Repeat steps

to

and select the

channel you want to restore by the

Î/ï

button.

- Press

Í/Æ button to select Off option to

restore the skipped channel.

Editing of Channel

TV Menu

Picture

Sound

Features

Install

Language

Auto Store

Manual Store

Sort

Name

Channel Edit

Æ

Channel

·

Skipped

·

9

Manual Store

Manual Store feature allows you to store the

programmes one at a time.

Press the MENU button.

Use the Î/ï button repeatedly until

Install is selected and press Æ button to

access Install menu.

- Colour System:

use the

Í/Æ button to select Auto

(automatic detection),

PAL, NTSC 3.58,

NTSC 4.43 or

SECAM.

- Sound System:

use the

Í/Æ button to select Auto

(automatic detection), BG, I, DK or M.

- Search:

press

Æ button to start manual search.

Searching stops once a transmitting channel

is found. If you know the frequency of

the required channel, you can key in

directlythe frequency using the

Digit (0 to

9) buttons.

- Channel:

enter the required number with the Í/Æ

or 0 to 9 buttons.

- Fine Tune:

if the reception is not satisfactory, adjust

using the

Í/Æ button.

- Store:

press

Æ button to store channel.

To exit the menus, press Ë button.

Press ï button repeatedly until Manual

Store is selected and press Æ button to

enter Manual Store menu.

Use the Î/ï button to select a setting:

TV Menu

Picture

Sound

Features

Install

·

Language

·

Auto Store

·

Manual Store

·

Sort

·

Name

Manual Store

Colour System

Sound System

Search

Channel

Fine Tune

Store

Auto

Æ

Install

Language

Auto Store

Manual Store

Sort

Name

Channel Edit

Æ

·

Colour System

·

Sound System

·

Search

·

Programme

·

Fine Tune

10

Picture Settings

Press the MENU button. The TV

Menu is displayed on the screen (Picture

is highlighted).

Press Æ button to access Picture menu.

Use the Î/ï button to select a setting

and the

Í/Æ button to adjust.

To exit the menu, press

Ë button.

Description of the adjustments:

• Brightness: this changes picture brilliance.

• Colour: this changes the intensity of the

colour.

• Contrast: this changes the difference

between the light and dark tones.

• Sharpness: this changes the picture

definition.

• Hue (available for NTSC programmes only):

to increase or decrease colour intensity.

• ColourTemp.: this changes the colour

rendering: Cool (more blue), Normal

(balanced) or Warm (more red).

Sound Adjustments

Press the MENU button.

Press ï button repeatedly until Sound

is selected and press

Æ button to access

the Sound menu.

Use the Î/ï button to select a setting

and the

Í/Æ button to adjust.

To exit the menu, press

Ë button.

Description of the settings:

• Equalizer: to adjust the sound tone (from

bass: 120 Hz to treble: 10 kHz).

• Balance: this balances the sound on the

left and right speakers.

• AVL (Automatic Volume Leveller): this is

used to limit increases in sound, especially

on program change or advertising slots.

This is not available when Dolby Virtual is

activated.

• Dolby Virtual: to activate / deactivate

the surround sound effect.

You can also access these settings with the

button k.

Feature Settings

Press the MENU button.

Press ï button repeatedly until

Features is selected and press Æ button

to access

Features menu.

Timer: allows you to set the timer

to switch to another programme at a

specified time. (refer to page 11).

Child Lock: allows you to lock

programmes. (refer to page 11).

Contrast+: automatic adjustment of the

picture contrast which permanently sets

the darkest part of the picture to black.

NR: attenuates picture noise (snow) in

difficult reception conditions.

PIP: to adjust the size and position of

the PIP screen.

To exit the menus, press Ë.

TV Menu

Picture

Sound

Features

Install

Sound

Equalizer

Balance

AVL

Dolby Virtual

Æ

120 Hz

·

Æ

500 Hz

·

Æ

1500 Hz

·

Æ

10 KHz

·

5 KHz

TV Menu

Picture

Sound

Features

Install

Picture

Brightness

Colour

Contrast

Sharpness

Hue

ColourTemp.

Æ

39

TV Menu

Picture

Sound

Features

Install

Features

Timer

Child Lock

Contrast+

NR

PIP

Æ

Time

·

Æ

Start Time

·

Æ

Stop Time

·

Æ

Activate

·

Channel

11

Timer Feature

The Timer feature allows you to set the

timer to switch to another programme at

a specified time when you are watching

another programme or from standby mode.

For the timer to function, the set must not

be switched off. Once the set is switched off,

the timer is disabled.

Press MENU, select Features (ï) and

press Æ. The Timer menu is displayed.

Time: enter the current time.

Start Time: enter the start time.

Stop Time: enter the standby time.

Channel: enter the channel number that

you want to switch to by the Timer.

Activate: the settings include:

• Once for one time activation,

• Daily for each day,

• Off to deactivate Timer.

Display: to activate / deactivate the

current time display on screen.

To exit the menu, press Ë button.

Press . to put the TV set in standby

mode. It will automatically come on at

the time set. If you leave the TV set on,

it will just change programme at the time

entered (and will go to standby mode at

the Stop Time).

Timer

Time

Start Time

Stop Time

Channel

Activate

Display

- - : - -

Æ

TV Menu

Picture

Sound

Features

Install

·

Timer

·

Child Lock

·

Contrast+

·

NR

·

PIP

Features

Timer

Child Lock

Contrast+

NR

PIP

Æ

·

Time

Start Time

Stop Time

Channel

Activate

Child Lock Feature

The Child Lock feature allows you to lock

programmes to prevent your children from

watching programmes you deem undesirable.

Press the MENU button.

With the cursor, select the Feature

menu then Child Lock

menu.

Enter the access code 0711. A message

Incorrect will appear. Enter the access

code 0711 again.

It will prompt you to Change Code.

Enter your own four-digit code using the

0-9 buttons and confirm the new code.

Once the new code is confirmed, the

Child Lock menu will appear.

Use the Î/ï button to select a setting

and the

Í/Æ button to adjust.

To exit the menu, press Ë button.

Description of the settings:

• Lock Channel: to lock individual

programme. A keylock symbol

+ appears

beside the locked programme number

or the symbol

? for an unlocked

programme.

• Change Code: enter your new four-digit

code using the

0-9 buttons and confirm by

entering the new four-digit again.

• Clear All: allows you to unlock all locked

programmes.

• Lock All: allows you to lock all

programmes.

Child Lock

Lock Channel

Change Code

Clear All

Lock All

Æ +

5

Æ

TV Menu

Picture

Sound

Features

Install

·

Timer

·

Child Lock

·

Contrast+

·

NR

·

PIP

Features

Timer

Child Lock

Contrast+

NR

PIP

Æ

Access Code

- - - -

12

This feature allows you to call up a PIP

(Picture-in-Picture) window on the screen.

For the

PIP to function, the HDMI input of

the TV must be connected to digital output

of AV device, e.g. PC / DVD-R (See Quick

Guide for connection).

Press the MENU button.

Press the ï button repeatedly until

Features is selected and press Æ button

to access

Features menu.

Press the ï button repeatedly until PIP

is selected and press

Æ button to access

PIP menu. (PIP Size is highlighted).

Press Í/Æ button to select your desired

PIP size options.

If you want to move the PIP window

horizontally or vertically, press

ï button

to select horizontal or vertical.

Press

Í/Æ button to move PIP window

horizontally or vertically.

To exit PIP window from screen, press

Î button until PIP size is selected. Press

Í/Æ button repeatedly until Off option

is selected.

Note: you can also access the PIP window

directly via the

(PIP) button on the

remote control.

• Press the button to display the PIP

window.

• Press the button repeatedly to toggle

through the various PIP window sizes and

select your desired size.

• Use the P -/+ buttons to change the

programme on the PIP screen.

PIP Feature

TV Menu

Picture

Sound

Features

Install

·

Timer

·

Child Lock

·

Contrast+

·

NR

·

PIP

Features

Timer

Child Lock

Contrast+

NR

PIP

Æ

·

Time

Start Time

Stop Time

Channel

Activate

PIP

PIP Size

Horizontal

Vertical

Off

Æ

This feature automatically adjust the

picture setting for optimal picture quality

continuously under any signal conditions.

You can select the Active Control On

mode or the Active Control ON With

Sensor mode.

If Control On With Sensor mode is

selected, the sensor will sense and adjust

picture setting according to the lighting

conditions of the room.

You can also select to Active Control Off

mode to switch off Active control function.

Press h button repeatedly to

cycle through the various

Active

Control modes and select your desired

mode.

To exit the menu, press Ë.

Using the Active Control Feature

Active Control ON With Sensor

OR

Active Control Off

Active Control On

13

Screen Formats

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format

(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the

screen (letterbox format). This function allows you to optimise the picture display on screen.

Press the ∏ button or Í/Æ button to select the different modes:

This TV set is also equipped with automatic switching which will select the

correct-screen format, provided the specific signals are transmitted with the

programmes.

4:3

The picture is reproduced in 4:3 format and a black band is displayed on

either side of the picture.

Movie Expand 14:9

The picture is enlarged to 14:9 format, a thin black band remains on both

sides of the picture.

Movie Expand 16:9

The picture is enlarged to 16:9 format. This mode is recommended

when displaying pictures which have black bands at the top and bottom

(letterbox format).

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the

screen leaving the sub-titles visible.

Super Zoom

This mode is used to display 4:3 pictures using the full surface of the

screen by enlarging the sides of the picture.

Widescreen

This mode restores the correct proportions of images transmitted in 16:9.

Note: If you display a 4:3 picture in this mode, it will be enlarged horizontally.

14

Using the Teletext

If a TV channel broadcast contains teletext information, each channel that broadcasts teletext

transmits a page (index page) with information on how to use the teletext system, usually on

page 100. The system transmitted is indicated in the option line at the bottom of the screen.

On/Off teletext

and Superimpose

teletext page over TV

programme

Press the button once to switch on teletext

display. (Select a channel in which teletext

is being transmitted). Press the button the

second time to superimpose the teletext

page over the TV programme.

Press the button the third time to exit

teletext mode.

Key in the required teletext page (3digits).

The page number is displayed at the top

left hand corner of the screen. When the

teletext page is located, the counter stops

searching. If the counter keeps searching,

it means that the page is not available for

selection. If you make a mistake in keying the

page number, you have to complete keying

the 3-digit number before re-keying the

correct page number.

Selecting a teletext page

Press the P + button to display the next

page and the P – button to display the

previous page.

Accessing a teletext page

The 4-colour buttons allow you to access

directly an item or corresponding pages.

Direct Access to an item

or corresponding pages

Press the button to return to the main index

page.

Main Index

Press button to display or exit dual page text

mode. The active page is displayed on the

left and the following page is displayed on

the right. Press ( Hold) button if you

want to hold a page (contents page). The

active page is now displayed onthe right. To

return to normal mode, press

( Dual page / 4) button.

Dual Page Text

15

Using the Teletext

When a dual page is displayed, use this

button to toggle between the dual page.

Once an active page is selected, the other

page will be on hold mode. If the page has

sub-pages, use the Cursor Right or Left

button to access the next or previous page.

Hold

Press the button once to reveal hidden

information (solutions to puzzles, riddles,

etc). Press the button the second time to

conceal information. This button is applicable

only to teletext page with puzzles, riddles,

etc.)

Reveal/Conceal

How to select your favourite page

This feature allows you select 4 of your favourite or most commonly viewed page and stored

them in the favourite page selection. You can then access directly your favourite page by the

colour buttons without having to key in the page number.

1. Press the

(Teletext On/Off) button to enter teletext mode.

2. Press the

MENU button to enter favourite page selection. Note : The colour alphabets

at the bottom of the screen is now changed to page numbers.

3. Key in your favourite page by the (Digit 0 -9) buttons.

4. Press the

(OSD/Index) button followed by your desired colour button to store

your favourite page.

5. Repeat step 3 to

4 to select and store other favourite pages.

6. To exit Favourite page mode, press

MENU button.

7. Press the

(Teletext On/Off) button twice to exit teletext mode.

16

Smart Picture and Sound Feature

Smart Picture feature offers you a choice of 5 picture settings, namely, Rich, Natural, Soft,

DVD/VCD and Personal.

Smart Sound feature offers you a choice of 4 sound settings namely, Theatre, Music,

Voice and Personal.

Press or button repeatedly to cycle through the settings to select your desired mode.

Defintion of Picture Settings

Personal : Picture settings are set to your

preference.

Rich : Emphasize very vibrant colours.

(Suitable for AV mode in brightly-lit

room)

Natural : Emphasize original colours.

Soft : Emphasize “ warm” colours. (Suitable

for dimly-lit room condition and gives

cinema-like effect when light is

switched off).

DVD/VCD : Emphasize “soft” colours.

(Suitable for playing computer

games, surﬁng, etc.)

Defintion of Sound Settings

Personal : Sound settings are set to your

preference.

Theatre : Emphasize sensation to action.

(Bass and Treble boosted)

Music : Emphasize low tone. (Bass boosted)

Voice : Emphasize high tone. (Treble

boosted)

Personal

Rich

Natural

Soft

DVD/VCD

OR

Personal

Theatre

Music

Voice

OR

Note : The Personal setting is the setting that you set up using the Picture menu in the main

menu. This is the only setting in the Smart Picture settings that can be changed. All the other

settings are pre-set at the factory.

17

Using the TV as a PC Monitor

Choosing PC-VGA mode

Press the AV button on the remote

control to display the Source List

.

Use the Î/ï button to select PC-VGA

and then press the

Æ button to switch the

TV to PC-VGA mode.

To return to TV mode, press the

AV

button, select TV and confirm with

Æ

button.

Choosing PC-D mode

Press the AV button on the remote

control to display the Source List

.

Use the Î/ï button to select PC-D and

then press the

Æ button to switch the TV

to PC-D mode.

To return to TV mode, press the

AV

button, select TV and confirm with

Æ

button.

Using the PC menus

Press the MENU button to display the

PC Menu

.

Use the Î/ï/Í/Æ button to select,

adjust or activate PC Menu items

namely: Picture, Audio Selection,

Features, Reset to Factory

.

• Picture Menu

:

– Brightness / Contrast: to adjust the

brightness and contrast.

– Horizontal / Vertical*: to adjust the

horizontal and vertical placing of the

image.

– Colour Temp: to adjust the colours

(cool, normal or warm).

• Audio Selection: to choose the sound

reproduced on the TV (PC/HD or TV).

• Feature Menu:

– Phase/Clock*: eliminates the

horizontal (

Phase) and vertical

(Clock) interfering lines.

– Format: to choose between

Widescreen or Native format of the

PC screens.

– PIP: to adjust the size and position of

the PIP screen.

– Auto Adjust*: position is set

automatically.

• Reset To Factory Setting: to return

to the factory settings (default settings).

*These adjustments are not available in

PC-D

mode.

NOTE

– When using the LCD TV as a PC monitor, slight diagonal interference lines may be

observed when it is operated under electromagnetic interference environment but

will not affect the performance of this product.

– For better performance, good quality HDMI/DVI/VGA cable with good noise

isolation filter is recommended.

Here is a list of different display resolutions available on your TV.

640 x 480, 60 Hz 800 x 600, 56 Hz 1024 x 768, 60 Hz

640 x 480, 67 Hz 800 x 600, 60 Hz 1024 x 768, 70 Hz

640 x 480, 72 Hz 800 x 600, 72 Hz 1024 x 768, 75 Hz

640 x 480, 75 Hz 800 x 600, 75 Hz

18

Using in HD (High Definition) Mode

HD Mode

The HD (High Definition) mode allows

you to enjoy clearer and sharper pictures

through the CVI-1, CVI-2 or HDMI input

if you are using a HD receiver/equipment

that can transmit high definition

programming.

You must connect the HD equipment (see

Quick Use Guide).

Choosing HD mode

Press the AV button on the remote

control to display the Source List

.

Depending on the connections, use the

cursor Î/ï button to select CVI-1

(SD/HD)*, CVI-2(SD/HD)* or HDMI

and then press the cursor

Æ button to

switch the TV to the selected mode.

To return to TV mode, press the

AV

button, select TV and press

Æ button to

enter selected mode.

*SD - Standard Definition

*HD - High Definition

Using the HD menus

Press the MENU button to access the

HD menu.

Use Î/ï/Í/Æ button to selesct, adjust

or activate menu items (the settings are

automatically saved):

• Picture/Sound Menus:

The HD Picture/Sound setting are the

same as the TV Picture/Sound settings

and function exactly the same way as in

the TV Picture/Sound menu.

• Features Menu:

– PIP: to adjust the size and position of

the PIP screen.

– Horizontal Shift: to adjust the

horizontal placing of the image.

– Vertical Shift: to adjust the vertical

placing of the image.

19

Tips

No power

Poor reception

No picture

Good picture but no

sound

Good sound but poor

colour or no picture

Snowish picture and

noise

Horizontal dotted

line

Double images or

“Ghost” images

TV not responding

to remote control

handset

Incorrect Display

position (PC mode)

No Video Input (PC

Mode)

Vertical ﬂicker

appears (PC Mode)

Horizontal ﬂicker

appears (PC Mode)

Screen too bright or

dark (PC Mode)

• Check the TV’s AC power cord is plugged into the mains socket. If there

is still no power, disconnect plug. Wait for 60 seconds and re-insert plug.

Switch on the TV again.

• The proximity of mountains or high buildings may be responsible for

ghost pictures, echoing or shadows. In this case, try manually adjusting

your picture: refer to “Fine Tune” on page 9 or modify the orientation

of the outside aerial. If you are using an indoor aerial, reception may be

difﬁcult in certain conditions.You can improve reception by rotating the

aerial. If the reception remains poor, you will need to use an external aerial.

• Check the antenna connection at the rear of the TV.

• Try another programme to conﬁrm whether it is a particular TV station

problem or otherwise.

• Try increasing the volume.

• Check that the sound is not muted. If it is muted, press the

Mute button

on the remote control to restore sound.

• Try increasing the contrast and brightness setting.

• Check antenna connection at the rear of the TV.

• Possible electrical interference e.g. hairdryer, vacuum cleaner, etc. Switch

off appliances.

• Possible poor positioning of antenna. Using a highly directional antenna

may improve reception.

• Aim remote control handset directly at remote control sensor lens on

the TV.

• If there is no response, check whether plastic insulation sheet is removed

and the battery is placed correctly

(words on battery should be facing you).

• Try changing the battery.

• If the set receives no signal for 15 mins, it automatically goes into standby

mode.

• Adjust the image position using the Horizontal Position and/or Vertical

Position in the PC Mains Controls menu.

• Make sure the monitor cable is properly connected to the PC input

(VGA/DVI) at the bottom of the TV.

• Check whether the monitor cable has bent pins.

• Try eliminating the vertical bars by using the Clock Adjustment of Video

Noise in the Main PC Menu.

• Try eliminating the horizontal bars by using the Phase. Adjustment of

Video Noise in the Main PC Menu.

• Try adjusting the contrast and brightness in the Main Menu.

ページが読み込まれています...

Philips 32PF5320/98 取扱説明書

Philips 32PF5320/98 取扱説明書

他の言語で

関連論文

その他のドキュメント