Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA
800-810-5858
400-810-5858
010-6475 1880
www.samsung.com/cn
HONG KONG:3698 - 4698 www.samsung.com/hk
INDIA
3030 8282
1-800-3000-8282
1800 110011
www.samsung.com/in
INDONESIA 0800-112-8888 www.samsung.com/id
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com/nz
PHILIPPINES 1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
02-5805777
www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg
THAILAND
1800-29-3232
02-689-3232
www.samsung.com/th
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com/za
U.A.E 800-SAMSUNG (726-7864)
8000-4726
www.samsung.com/ae
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
BN68-02101G-01
L350-02101G__.indb 1 2009-03-31 4:51:49
License
TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and
contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not
covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
❑
❑
●
●
●
L350-02101G__.indb 1 2009-03-31 4:51:49
English - 1
Symbol
N O
Note One-Touch Button TOOL Button
❑
SETTING UP YOUR TV
Viewing the Control Panel ................................................................. 2
Accessories ....................................................................................... 3
Viewing the Connection Panel ........................................................... 4
Viewing the Remote Control .............................................................. 6
Installing Batteries in the Remote Control ......................................... 7
OPERATION
Viewing the menus ............................................................................ 7
Placing Your Television in Standby Mode .......................................... 8
Plug & Play Feature ........................................................................... 8
CHANNEL
Channel Menu ................................................................................... 9
PICTURE
Conguring the Picture Menu ...........................................................11
Viewing Picture-in-Picture................................................................ 14
Using Your TV as a Computer (PC) Display .................................... 15
Setting up the TV with your PC........................................................ 16
SOUND
Conguring the Sound Menu ........................................................... 16
Selecting the Sound Mode .............................................................. 17
SETUP
Conguring the Setup Menu ............................................................ 18
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
INPUT
Input Menu ....................................................................................... 20
RECOMMENDATIONS
Teletext Feature ............................................................................... 21
Installing the Stand .......................................................................... 22
Disconnecting the Stand .................................................................. 23
Installing the Wall Mount Kit ............................................................ 23
Anti-Theft Kensington Lock ............................................................. 24
Securing the TV to the Wall ............................................................. 24
Troubleshooting: Before Contacting Service Personnel .................. 25
Specications .................................................................................. 26
■
■
■
■
■
■
■
■
■
CONTENTS
L350-02101G__.indb 1 2009-03-31 4:51:49
English - 2
SETTING UP YOUR TV
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
Viewing the Control Panel
The product colour and shape may vary depending on the model.
The front panel buttons can be activated by touching them with your finger.
[LA26B350, LA32B350]
[LA22B360, LA26B360, LA32B360]
1
SOURCE
E
: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the
ENTER
E
button on the remote control.
2
MENU: Press to see an on-screen menu of your TV’s features.
3
+ VOL –: Press to increase or decrease the volume.
In the on-screen menu, use the+ VOL – buttons as you would use the ◄ and ► buttons on the remote control.
4
CH : Press to change channels. In the on-screen menu, use the CH buttons as you would use the ▼ and ▲
buttons on the remote control.
5
POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.
6
P
(POWER): Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
8
SPEAKERS
N
M
N
N
L350-02101G__.indb 2 2009-03-31 4:51:49
English - 3
Accessories
Remote Control & Batteries (AAA x 2) Power Cord Stand Screw (4EA) (M4 X L16)
Cover-Bottom
Stand Screw (3EA) (M4 X L14)
(Depending on the model)
Owner’s Instructions
●
Warranty card
●
Safety Guide
●
Registration Cards
●
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The items colour and shape may vary depending on the model.
M
N
N
N
L350-02101G__.indb 3 2009-03-31 4:51:50
English - 4
Viewing the Connection Panel
[ LA26B350, LA32B350,LA26B360, LA32B360]
[ LA22B360]
M
1 2 3
678
4 5
0
[TV Rear Panel]
Power Input
1 2 3
678
4 5
0
[TV Rear Panel]
Power Input
L350-02101G__.indb 4 2009-03-31 4:51:51
English - 5
The product colour and shape may vary depending on the model.
1
HDMI IN 1(DVI), 2
Connects to the HDMI jack of a device with an HDMI output.
No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
HDMI(High-Denition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.
2
AV IN [VIDEO] / [R-AUDIO-L]
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
3
PC/DVI AUDIO IN
Connect to the audio output jack on your PC.
DVI audio outputs for external devices.
4
PC IN
Connect to the video output jack on your PC.
If your PC supports an HDMI connection, you can connect this to the HDMI IN 1 (DVI), 2 terminal.
If your PC supports a DVI connection, you can connect this to the HDMI IN 1 (DVI) / PC/DVI AUDIO IN terminal.
5
AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding
audio in connectors on the Amplier or DVD Home Theatre.
6
COMPONENT IN
Connect component video cables (optional) to component connector (PR, PB, Y) on the rear of your set and the other ends
to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (PR, PB, Y) on your set.
The PR, PB and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
7
SERVICE
Connector for service only.
8
ANT IN
Connects to an antenna or cable TV system.
9
SERVICE
Connector for service only.
0 H
(HEADPHONE)
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
Using the sound function is restricted when connecting headphones to the TV.
Prolonged use of headphones at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to the TV.
The headphone volume and TV volume are adjusted separately.
N
N
N
●
●
N
–
–
–
–
–
N
N
–
–
–
–
–
–
–
–
–
–
N
N
N
N
L350-02101G__.indb 5 2009-03-31 4:51:51
English - 6
Viewing the Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product colour and shape may vary depending on the model.
1
POWER : Turns the TV on and
off.
2
NUMERIC BUTTONS : Press to
change the channel.
3
E
: Performs the same function
as the ENTER
E
button of
the directional buttons. When
switching channels with the
numeric buttons, and you press
the channel number and then the
ENTER
E
button, the channel is
immediately switched.
4
-=+
: Press to increase or
decrease the volume.
5
SOURCE : Press to display
and select the available video
sources.
6
CH LIST : Displays the Channel
List on screen.
7
TOOLS : Use to quickly select
frequently used functions.
8
INFO : Press to display
information on the TV screen.
9
COLOUR BUTTONS : Use these
buttons in the Fastext menu, etc.
!
TV : Selects the TV mode
directly.
@
PRE-CH : Enables you to return
to the previous channel you were
watching.
#
MUTE : Press to temporarily
cut off the sound.
$
>
P
<
: Press to change
channels.
%
MENU : Displays the main on-
screen menu.
^
HDMI : Selects the HDMI mode
directly.
&
RETURN : Returns to the
previous menu
*
UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
E
: Use to
select on-screen menu items and
change menu values.
(
EXIT : Press to exit the menu.
)
P.SIZE : Picture size selection
a
S.MODE : Sound mode
selection.
Teletext Functions
5
0
: Teletext mode selection
(LIST / FLOF)
6
8
: Teletext store
7
4
: Teletext size selection
8
5
: Teletext reveal
9
Fastext topic selection
0
/
: Alternately select
Teletext, Double, or Mix.
!
: Exit from the Teletext
display
@
1
: Teletext sub page
$
2
: Teletext next page
3
: Teletext previous page
%
6
: Teletext index
&
9
: Teletext hold
(
7
: Teletext cancel
M
N
N
N
1
2
3
4
5
6
7
8
9
0
!
@
#
$
&
*
(
)
a
%
^
L350-02101G__.indb 6 2009-03-31 4:51:52
English - 7
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?
OPERATION
OPERATION
Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
Operation the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1. Press the MENU button.
2. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input.
3. Press the ▲ or ▼ button to select one of the icons.
4. Then press the ENTER
E
button to access the icon’s sub-menu.
5. Press the ▲ or ▼ button to select the icon’s submenu.
6. Press the ◄ or ► button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
7. Press the ENTER
E
button to complete the configuration. Press the EXIT button to exit.
M
N
N
N
•
•
•
•
•
M
❑
MENU Button
Display the main on-screen menu.
ENTER
E
/ DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
EXIT
Exit the on-screen menu.
Mode : Dynamic
Backlight 10
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint (G/R) G 50 R 50
Advanced Settings
Picture Options
Reset : OK
U
Move
E
Enter
R
Return
TV Picture
Mode : Dynamic
Backlight 10
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint (G/R) G 50 R 50
Advanced Settings
Picture Options
Reset : OK
U
Move
E
Enter
R
Return
TV Picture
Help Icon
▲
Backlight
▼
10
U
Move
L
Adjust
R
Return
L350-02101G__.indb 7 2009-03-31 4:51:53
English - 8
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
P
button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER
P
button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER
P
button on the remote control.
You can also use the POWER
P
button on the TV.
2. Press the ▲ or ▼ button to select the language, then press the ENTER
E
button.
3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
button.
We recommend setting the TV to Home Use mode for the best picture in your home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. The message Check antenna input. is displayed with OK selected.
Press the ENTER
E
button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate area by pressing the▲ or ▼ button.
Press the ENTER
E
button to confirm your choice.
6. The Auto Store menu is displayed with the Start selected. Press the ENTER
E
button.
The channel search will start and end automatically.
Press the ENTER
E
button at any time to interrupt the memorization process.
After all the available channels are stored, the Clock Set menu appears.
7. Press the ENTER
E
button.
Select the Month, Day, Year, Hour, Minute, or am/pm by pressing the ◄ or ► button.
Set the Month, Day, Year, Hour, Minute, or am/pm by pressing the ▲ or ▼ button.
You can also set the Month, Day, Year, Hour and Minute by pressing the number buttons on the remote control.
8. Press the ENTER
E
button to confirm your setting. The message Enjoy your TV. is displayed.
When you have finished, press the ENTER
E
button.
Even if the ENTER
E
button is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.
M
N
N
M
N
N
N
N
N
N
N
N
N
N
N
Plug & Play
Language : English
Time
Child Lock : On
Change PIN
Game Mode : Off
Melody : Off
Energy Saving : Off
PIP
U
Move
E
Enter
R
Return
TV Setup
L350-02101G__.indb 8 2009-03-31 4:51:54
English - 9
CHANNEL
Channel Menu
Area
You can change the area for channels.
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your
area). Automatically allocated programme numbers may not correspond to actual or desired
programme numbers.
Scans for all channels with active broadcast stations and stores them in the TV’s memory.
If you want to stop Auto Store, press the ENTER
E
button.
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
ColourSystem→Auto/PAL/SECAM/NTSC4.43/NTSC3.58: Sets the colour system value using the ▲ or ▼ button.
SoundSystem→BG/DK/I/M: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER
E
button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Channel List
Using the Channel List, you can conveniently lock or add channels.
Adding channels
Using the Channel List, you can add channels.
Move to the (
#
) field by pressing the ▲, ▼, ◄ or ► button, select a channel to be added, and press the ENTER
E
button to
add the channel.
If you press the ENTER
E
button again, the
c
symbol next to the channel disappears and the channel is not added.
Locking channels
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out
video and audio.
\
is active when Child Lock is selected to On. (refer to page 18)
Move to the
\
field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER
E
button.
The PIN number input screen appears. Enter your 4 digit PIN number.
If you press the ENTER
E
button again, the
c
symbol next to the channel disappears and the channel lock is cancelled.
A blue screen is displayed when Child Lock is activated.
Select On or Off in Child Lock to easily turn the channels which selected on
\
to be active or inactive.
You can select these options by simply pressing the CH LIST button on the remote control.
M
❑
❑
N
N
❑
N
●
●
●
●
N
N
●
●
N
–
–
–
❑
–
–
N
–
N
N
N
N
O
Area : Asia/Europe
Auto Store
Manual Store
Channel List
Sort
Name
Fine Tune
U
Move
E
Enter
R
Return
TV Channel
L350-02101G__.indb 9 2009-03-31 4:51:54
English - 10
Sort
This operation allows you to change the programme numbers of the stored channels.
This operation may be necessary after using the auto store.
The channel is moved to its new position and all other channels are shifted accordingly.
Name
Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you
to assign new names.
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space)
Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the
channel banner.
To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER
E
button.
Only TV channels can be fine tuned.
❑
N
❑
N
❑
N
N
N
L350-02101G__.indb 10 2009-03-31 4:51:54
English - 11
PICTURE
Configuring the Picture Menu
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting Tools→PictureMode.
The Picture mode must be adjusted separately for each input source.
Dynamic
Selects the picture for increased definition in a bright room.
Standard
Selects the picture for the optimum display in a normal environment.
Movie
Selects the picture for viewing movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
Backlight
Adjusts the brightness of LCD back light.
Contrast
Adjusts the contrast level of the picture.
Brightness
Adjusts the brightness level of the picture
Sharpness
Adjusts the edge definition of the picture.
Colour
Adjusts colour saturation of the picture.
Tint (G/R)
Adjusts the colour tint of the picture.
In TV, AV modes of the PAL system, you cannot use the Tint (G/R) Function.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
In PC mode, you can only make changes to Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will
reduce the overall running cost.
M
❑
N
■
■
■
❑
■
■
■
■
■
■
N
N
N
N
N
Mode : Dynamic
Backlight 10
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint (G/R) G 50 R 50
Advanced Settings
Picture Options
Reset : OK
U
Move
E
Enter
R
Return
TV Picture
▲
Backlight
▼
10
U
Move
L
Adjust
R
Return
L350-02101G__.indb 11 2009-03-31 4:51:54
English - 12
Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous
models.
Advanced Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Gamma and White Balance from among the
Advanced Settings items.
BlackTone→Off/Dark/Darker/Darkest
You can select the black level on the screen to adjust the screen depth.
DynamicContrast→Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (red, green, blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite colour space to experience the
most natural colour.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
Native: Native Colour Space offers deep and rich colour tone.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset: Adjusts the red colour darkness.
G-Offset: Adjusts the green colour darkness.
B-Offset: Adjusts the blue colour darkness.
R-Gain: Adjusts the red colour brightness.
G-Gain: Adjusts the green colour brightness.
B-Gain: Adjusts the blue colour brightness.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture.
Changing the adjustment value will refresh the adjusted screen.
EdgeEnhancement→Off/On
You can emphasize object boundaries in the picture.
❑
N
N
■
■
■
■
●
●
■
●
●
●
●
●
●
●
■
N
■
Black Tone : Off
Dynamic Contrast : Medium
Gamma : 0
Colour Space : Native
White Balance
Flesh Tone : 0
Edge Enhancement : On
U
Move
E
Enter
R
Return
TV Advanced Settings
L350-02101G__.indb 12 2009-03-31 4:51:55
English - 13
Picture Options
In PC mode, you can only make changes to the Colour Tone and Size from among the
items in Picture Options.
ColourTone→Cool/Normal/Warm1/Warm2
Warm1 or Warm2 is only activated when the picture mode is Movie.
Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with several screen size options, each
designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as
well. In general, though, you should view the TV in 16:9 mode as much as possible.
Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i) or Component (1080i) signals
are input.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ► or ENTER
E
button.
Zoom: Select by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up and down. After selecting
, use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode:
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
E
button.
You can initialize the setting.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
DigitalNR→Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
HDMIBlackLevel→Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
FilmMode→Off/Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
PictureReset→OK/Cancel
Resets all picture settings to the default values.
❑
N
■
N
N
■
O
●
●
●
●
●
N
N
N
N
N
N
N
N
N
N
■
N
■
N
■
N
❑
Colour Tone : Cool
Size : 16:9
Digital NR : Auto
HDMI Black Level : Normal
Film Mode : Off
U
Move
E
Enter
R
Return
TV Picture Options
L350-02101G__.indb 13 2009-03-31 4:51:55
English - 14
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function in the same
mode. Please see ‘PIP Settings’ below for details.
Press the TOOLS button to display the Tools menu. You can also configure PIP related
settings by selecting Tools→PIP.
PIP Settings
Main picture Sub picture
Component
HDMI1/DVI, HDMI2
PC
TV, AV
If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will
disappear.
You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
PIP→Off/On
You can activate or deactivate the PIP function.
Source
You can select a source of the sub-picture.
Size→ / /
You can select a size of the sub-picture.
If main picture is in HDMI mode, Size is available.
Position→ / / /
You can select a position of the sub-picture.
In Double ( / ) mode, Position cannot be selected.
Programme
You can select the channel for the sub-screen.
Programme is available when the Source is set to TV.
When you set the sub picture as TV,you can use the number button and channel up/down button to change the sub picture
channel.
M
N
N
N
❑
❑
❑
N
❑
N
❑
N
N
Plug & Play
Language : English
Time
Child Lock : On
Change PIN
Game Mode : Off
Melody : Off
Energy Saving : Off
PIP
U
Move
E
Enter
R
Return
TV Setup
PIP : Off
Source : TV
Size :
Position :
Programme : P 1
E
Enter
R
Return
TV PIP
L350-02101G__.indb 14 2009-03-31 4:51:55
English - 15
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and
your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or
Samsung Dealer.)
1. First, click on ‘Control Panel’ on the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a display
dialog-box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution) - Optimum: 1360 X 768 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are
recommended.
D-Sub and HDMI/DVI Input
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM 640 x 350 31.469 70.086 25.175 +/-
720 x 400 31.469 70.087 28.322 -/+
MAC 640 x 480 35.000 66.667 30.240 -/-
832 x 624 49.726 74.551 57.284 -/-
VESA CVT 720 x 576 35.910 59.950 32.750 -/+
1280 x 720 44.772 59.855 74.500 -/+
1280 x 720 56.456 74.777 95.750 -/+
VESA DMT 640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.500 75.000 31.500 -/-
640 x 480 37.861 72.809 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 46.875 75.000 49.500 +/+
800 x 600 48.077 72.188 50.000 +/+
1024 x 768 48.363 60.004 65.000 -/-
1024 x 768 56.476 70.069 75.000 -/-
1024 x 768 60.023 75.029 78.750 +/+
1360 x 768 47.712 60.015 85.500 +/+
VESA GTF 1280 x 720 52.500 70.000 89.040 -/+
When using an HDMI / DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
M
•
•
■
N
N
N
N
L350-02101G__.indb 15 2009-03-31 4:51:56
English - 16
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
positions.
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools→AutoAdjustment.
This function does not work in DVI-HDMI mode.
Screen
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and
Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on
the centre of screen.
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
SOUND
Configuring the Sound Menu
Mode→Standard/Music/Movie/ClearVoice/Custom
You can select these options by simply pressing the S.MODE button on the remote control.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voice over other sounds.
Custom: Recalls your customized sound settings.
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.
If you make any changes to these settings, the sound mode is automatically switched to Custom.
SRSTruSurroundHD→Off/On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
M
N
❑
N
❑
■
■
■
M
❑
O
●
●
●
●
●
❑
●
●
N
❑
Mode : Dynamic
Backlight 10
Contrast 100
Brightness 45
Sharpness 50
Auto Adjustment
Screen
Advanced Settings
Picture Options
Reset : OK
U
Move
E
Enter
R
Return
TV Picture
Coarse 50
Fine 26
PC Position
Image Reset
U
Move
E
Enter
R
Return
TV Screen
Mode : Standard
Equalizer
SRS Trusurround HD : Off
Auto Volume : Off
Speaker Select : TV Speaker
Sound Select : Main
U
Move
E
Enter
R
Return
TV Sound
L350-02101G__.indb 16 2009-03-31 4:51:56
English - 17
AutoVolume→Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
Auto Volume is not available in Component and HDMI mode.
Speaker Select
When you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can listen to sound from the Home
theatre’s (external) speakers.
External Speaker: Used to listen to the sound of the External (Home Theatre) Speakers.
TV Speaker: Used to listen to the sound of the TV Speakers.
The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker.
If you select External Speaker in the Sound Select menu, the sound settings will be limited.
TV’s Internal Speakers Audio Out (L/R Out) to Sound System
RF / AV / Component / PC / HDMI RF / AV / Component / PC / HDMI
TV Speaker Sound Output Sound Output
External Speaker Mute Sound Output
Video No Signal Mute Mute
SoundSelect→Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
You can select this option when PIP is set to On.
Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools→PIP→
Sound Select.
Selecting the Sound Mode
You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.
Audio Type Dual 1 / 2 Default
A2 Stereo
Mono MONO
Automatic change
Stereo STEREO ↔ MONO
Dual DUAL 1 ↔ DUAL 2 DUAL 1
NICAM
Stereo
Mono MONO
Automatic change
Stereo MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
❑
N
❑
●
●
N
N
❑
N
M
N
N
N
L350-02101G__.indb 17 2009-03-31 4:51:57
English - 18
SETUP
Configuring the Setup Menu
Language
You can set the menu language.
Time
Clock
Setting the clock is necessary in order to use the various timer features of the TV.
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools→SleepTimer.
To cancel the Sleep Timer function, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made.
You must set the clock first.
On Time
Set the hour, minute, am/pm and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to Activated.)
Off Time
Set the hour, minute, am/pm and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to Activated.)
Repeat
Select Once, Everyday, Mon~Fri, Mon~Sat or Sat~Sun.
Volume
Select the desired turn on volume level.
Programme
When the On Timer is active, you can turn on a specific channel.
You can set the hour, minute and channel by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV
is on for too long time.
ChildLock→Off/On
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video
and audio.
Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu.
You can lock some channels in Channel List. (refer to page 9)
Child Lock is available only in TV mode.
With Child Lock on,you can use number key to change channel,only can use channel up/down button.
M
❑
❑
■
O
N
■
N
■
●
●
●
●
●
N
N
❑
N
N
N
N
N
Plug & Play
Language : English
Time
Child Lock : On
Change PIN
Game Mode : Off
Melody : Off
Energy Saving : Off
PIP
U
Move
E
Enter
R
Return
TV Setup
L350-02101G__.indb 18 2009-03-31 4:51:57
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
他の言語で
- English: Samsung LA32B350F1 User manual