8
JABRA BT2035
What the liGhts mean
What you see What this means about your headset
Solid light: In pairing mode – see Pairing section
Slow single ash: Connected to phone and in standby
mode*
Slow double ash: Not connected to phone and in
standby mode*
Quick single ash: Active on call
Quick double ash: Incoming/Outgoing call
Triple ash: Battery low
* BT2035 is equipped with Jabra Discreet Light feature, meaning
that light indicator (LED) turns o after 1 min of non-activity.
Headset is still active, and light will ash again after a tap on the
answer/end button or any call activity.
troubleshootinG & faQ
I hear crackling noises
- For the best audio quality, always wear your headset on the
same side of the body as your mobile phone.
I cannot hear anything in my headset
- Increase the volume on your phone.
- Ensure that the headset is paired with the phone.
- Make sure that the phone is connected to the headset – if it
does not connect either from the phone’s
menu or by
tapping the answer/end button, follow the pairing procedure
(refer to pairing section in this user manual).
- You can determine whether your headset is connected to a
device by looking at the ashes on the headset after tapping the
answer/end button when the headset is on: single slow ashes
means that the headset is connected to a device, double slow
ashes means that the headset is currently not connected.