Tascam DR 60D MKII 取扱説明書

D01230700A

DR-60D

)

"

Linear PCM Recorder

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

2

TASCAM DR-60DMKII

• TASCAM is a trademark of TEAC CORPORATION, registered

in the U.S. and other countries.

• SDHC Logo is a trademark of SD-3C, LLC.

• Microsoft, Windows and Windows Vista are either registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• Apple, Macintosh, iMac, Mac OS and Mac OS X are trademarks

of Apple Inc.

• Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

http://tascam.jp/

TEAC AMERICA, INC.

http://tascam.com/

Phone: +1-323-726-0303

7733 Telegraph Road, Montebello, California 90640 USA

TEAC MEXICO, S.A. de C.V.

http://teacmexico.net/

Phone: +52-55-5010-6000

Río Churubusco 364, Colonia Del Carmen, Delegación

Coyoacán, CP 04100, México DF, México

TEAC UK LIMITED

http://tascam.eu/

Phone: +44-8451-302511

Meridien House, Ground Floor,69 - 71, Clarendon Road,

Watford, Hertfordshire, WD17 1DS, UK

TEAC EUROPE GmbH

http://tascam.eu/

Phone: +49-611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

TEAC SALES & TRADING(SHENZHEN) CO., LTD

http://tascam.cn/

Phone: +86-755-88311561~2

Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd.,

Futian District, Shenzhen 518040, China

TASCAM DR-60DMKII

3

Owner’s Manual

IMPORTANT SAFETY PRECAUTIONS

INFORMATION TO THE USER

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and receiver.

c) Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC

CORPORATION for compliance could void the user’s authority to operate this

equipment.

For U.S.A.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME

NMB-003 DU CANADA.

Declaration of Conformity

Model Number : DR-60DMKII

Trade Name : TASCAM

Responsible party : TEAC AMERICA, INC.

Address : 1834 Gage Road, Montebello, California, U.S.A.

Telephone number : 1-323-726-0303

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including inter-

ference that may cause undesired operation.

DECLARATION OF CONFORMITY

We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205 Wiesbaden-Er-

benheim, Germany declare in own responsibility, the TEAC

product described in this manual is in compliance with the

corresponding technical standards.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or

4

TASCAM DR-60DMKII

the third prong are provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete

outlet.

10 Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table specified by the manufac-

turer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

•

The apparatus draws nominal non-operating power from the AC outlet with

its POWER or STANDBY/ON switch not in the ON position.

•

The mains plug is used as the disconnect device, the disconnect device shall

remain readily operable.

•

Caution should be taken when using earphones or headphones with the

product because excessive sound pressure (volume) from earphones or

headphones can cause hearing loss.

•

If you are experiencing problems with this product, contact TEAC for a service

referral. Do not use the product until it has been repaired.

CAUTION

•

Do not expose this apparatus to drips or splashes.

•

Do not place any objects filled with liquids, such as vases, on the apparatus.

•

Do not install this apparatus in a confined space such as a book case or similar

unit.

•

The apparatus should be located close enough to the AC outlet so that you

can easily grasp the power cord plug at any time.

•

If the product uses batteries (including a battery pack or installed batteries),

they should not be exposed to sunshine, fire or excessive heat.

•

CAUTION for products that use replaceable lithium batteries: there is danger

of explosion if a battery is replaced with an incorrect type of battery. Replace

only with the same or equivalent type.

CAUTIONS ABOUT BATTERIES

This product uses batteries. Misuse of batteries could cause a leak, rupture or

other trouble. Always abide by the following precautions when using batteries.

•

Never recharge non-rechargeable batteries. The batteries could rupture or

leak, causing fire or injury.

•

When installing batteries, pay attention to the polarity indications (plus/minus

(¥/^) orientation), and install them correctly in the battery compartment as

indicated. Putting them in backward could make the batteries rupture or leak,

causing fire, injury or stains around them.

•

When you store or dispose batteries, isolate their terminals with insulation

tape or something like that to prevent them from contacting other batteries

or metallic objects.

•

When throwing used batteries away, follow the disposal instructions indicated

on the batteries and the local disposal laws.

•

Do not use batteries other than those specified. Do not mix and use new

and old batteries or different types of batteries together. The batteries could

rupture or leak, causing fire, injury or stains around them.

•

Do not carry or store batteries together with small metal objects. The batteries

could short, causing leak, rupture or other trouble.

•

Do not heat or disassemble batteries. Do not put them in fire or water.

Batteries could rupture or leak, causing fire, injury or stains around them.

•

If the battery fluid leaks, wipe away any fluid on the battery case before

inserting new batteries. If the battery fluid gets in an eye, it could cause loss

of eyesight. If fluid does enter an eye, wash it out thoroughly with clean water

without rubbing the eye and then consult a doctor immediately. If the fluid

gets on a person’s body or clothing, it could cause skin injuries or burns. If

this should happen, wash it off with clean water and then consult a doctor

immediately.

•

The unit power should be off when you install and replace batteries.

•

Remove the batteries if you do not plan to use the unit for a long time.

Batteries could rupture or leak, causing fire, injury or stains around them. If the

TASCAM DR-60DMKII

5

battery fluid leaks, wipe away any fluid on the battery compartment before

inserting new batteries.

•

Do not disassemble a battery. The acid inside the battery could harm skin or

clothing.

8

For European Customers

Disposal of electrical and electronic equipment

(a) All electrical and electronic equipment should be disposed of separately

from the municipal waste stream via designated collection facilities

appointed by the government or the local authorities.

(b) By disposing of the electrical and electronic equipment correctly, you will

help save valuable resources and prevent any potential negative effects on

human health and the environment.

(c) Improper disposal of waste equipment can have serious effects on the

environment and human health as a result of the presence of hazardous

substances in electrical and electronic equipment.

(d) The crossed out wheeled dust bin

symbol indicates that electrical and electronic equipment must

be collected and disposed of separately from household waste.

(e) The return and collection systems are available to the end users.

For more detailed information about disposal of old electrical

and electronic equipment, please contact your city office, waste

disposal service or the shop where you purchased the equipment.

Disposal of batteries and/or accumulators

(a) Waste batteries and/or accumulators should be disposed of separately from

the municipal waste stream via designated collection facilities appointed by

the government or the local authorities.

(b) By disposing of waste batteries and/or accumulators correctly, you will

help save valuable resources and prevent any potential negative effects on

human health and the environment.

(c) Improper disposal of waste batteries and/or accumulators can have serious

effects on the environment and human health as a result of the presence of

hazardous substances in batteries and/or accumulators.

(d) The crossed out wheeled dust bin

symbol indicates that batteries and/or accumulators must be collected and

disposed of separately from household waste.

If the battery or accumulator contains more than the specified

values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined

in the Battery Directive (2006/66/EC), then the chemical symbols

for lead (Pb), mercury (Hg) and/or cadmium (Cd) will be indicated

beneath the crossed out wheeled dust bin symbol.

(e) The return and collection systems are available to the end users.

For more detailed information about disposal of waste batteries and/or

accumulators, please contact your city office, waste disposal service or the

shop where you purchased them.

Pb, Hg, Cd

6

TASCAM DR-60DMKII

Contents

Introduction..............................................................................................................................7

Included items .........................................................................................................................7

Precautions for placement and use ................................................................................7

Beware of condensation ......................................................................................................7

Cleaning the unit ....................................................................................................................7

Using the TEAC Global Site .................................................................................................7

User registration .....................................................................................................................7

Names and Functions of Parts ...........................................................................................8

Front panel ...................................................................................................................................................8

Left side panel............................................................................................................................................8

Right side panel ........................................................................................................................................9

Rear panel .....................................................................................................................................................9

Top panel ......................................................................................................................................................9

Bottom Panel ..............................................................................................................................................9

Home Screen ......................................................................................................................... 10

Preparation .............................................................................................................................11

Powering the unit .................................................................................................................................11

Starting up the unit ............................................................................................................................. 11

Setting the built-in clock ................................................................................................................. 11

Shutting down (putting the unit in standby) .................................................................... 11

Inserting SD cards .................................................................................................................................12

Camera connection and attachment......................................................................................12

Connecting monitors and headphones................................................................................12

Basic operation procedures ............................................................................................ 13

Menu structure.......................................................................................................................................13

Recording ............................................................................................................................... 13

Recording Screen .................................................................................................................................13

About recording standby ................................................................................................................15

Menu structure.......................................................................................................................................15

Adjusting the input level .................................................................................................................15

Using the limiter ....................................................................................................................................15

Using the low-cut filter .....................................................................................................................16

Overview of recording modes .....................................................................................................16

Recording (MONO/STEREO recording)...................................................................................17

Playback .................................................................................................................................. 18

Adjusting the playback volume ..................................................................................................18

Playback ......................................................................................................................................................18

Selecting files for playback (skipping) ....................................................................................18

Menu structure.......................................................................................................................................18

Quick Operations ................................................................................................................. 19

QUICK button overview ...................................................................................................................19

Connecting with a Computer ......................................................................................... 19

Connecting with a computer using USB ...............................................................................19

Exchanging files with a computer .............................................................................................19

Disconnecting from a computer ................................................................................................19

Settings and Information ................................................................................................. 19

System Settings .....................................................................................................................................19

Quick reference for using various functions.............................................................20

Message...................................................................................................................................23

Troubleshooting .................................................................................................................. 24

Specifications ........................................................................................................................ 25

Ratings..........................................................................................................................................................25

Inputs and outputs ..............................................................................................................................25

Audio performance .............................................................................................................................25

Recording times.....................................................................................................................................25

Requirements for connected computers .............................................................................26

General ........................................................................................................................................................26

TASCAM DR-60DMKII

7

Introduction

Thank you very much for purchasing the TASCAM

DR-60DMKII Linear PCM Recorder.

Before connecting and using this unit, please take

time to read this manual thoroughly to ensure you

understand how to properly set it up and connect

it, as well as the operation of its many useful and

convenient functions. After you have finished

reading this manual, please keep it in a safe place for

future reference.

This Owner's Manual explains the main functions

of this unit. Please see the Reference Manual for

information about all the unit's functions.

You can also download this Owner's Manual and the

Reference Manual from the TEAC Global Site (http://

teac-global.com/).

Included items

This product includes the following items.

Take care when opening the package to avoid

damaging the items. Keep the packing materials for

transportation in the future.

Please contact TEAC if any of these items are missing

or have been damaged during transportation.

•

Main unit .................................................................................. × 1

•

USB cable ................................................................................. × 1

•

Owner’s Manual (this manual)

including warranty ............................................................× 1

Precautions for placement

and use

•

The environmental temperature operating range

of this unit is 0–40°C (32–104°F).

•

Do not install this unit in the following types of

locations. Doing so could degrade the sound

quality and/or cause malfunctions.

Places with significant vibrations

Near windows or other places exposed to

direct sunlight

Near heaters or other extremely hot places

Extremely cold places

Places with bad ventilation or high humidity

Very dusty locations

Locations exposed directly to rain or other

water

•

Do not place this unit on top of a power amplifier

or other device that generates heat.

•

If this unit is placed near a power amplifier or

other device with a large transformer, it could

cause a hum. If this occurs, increase the distance

between this unit and the other device.

•

This unit could cause color irregularities on a TV

screen or noise from a radio if used nearby. If this

occurs, use this unit farther away.

•

This unit might produce noise if a mobile phone

or other wireless device is used nearby to make

calls or send or receive signals. If this occurs,

increase the distance between this unit and those

devices or turn them off.

Beware of condensation

If the unit is moved from a cold to a warm place,

or used after a sudden temperature change, there

is a danger of condensation; vapor in the air could

condense on the internal mechanism, making

correct operation impossible. To prevent this, or if

this occurs, let the unit sit for one or two hours at the

new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not

wipe with chemical cleaning cloths, thinner, alcohol

or other chemical agents. Doing so could damage

the surface or cause discoloration.

Using the TEAC Global Site

You can download this Owner’s Manual and the

Reference Manual necessary for this unit from the

TEAC Global Site (http://teac-global.com/).

1.

Open the TEAC Global Site (http://teac-global.

com/).

2.

In the TASCAM Downloads section, click the

desired language to open the Downloads

website page for that language.

NOTE

If the desired language does not appear, click

Other Languages.

3.

Click the product name in the “Search by Model

Name” section to open the Downloads page for

that product.

4.

Select and download the Owner’s Manual and

the Reference Manual that are needed.

User registration

Customers in the USA, please visit the TASCAM

website (http://tascam.com/) to register as a user

online.

8

TASCAM DR-60DMKII

Names and Functions of Parts

Front panel

1 Handles

Use this to attach a strap.

2 Display

3 DATA dial (ENTER/MARK)

Use to select items and change values on the

setting screens.

4 MONITOR SELECT button

5 MENU button

6 MIXER button

7 QUICK button

This opens the quick menu pop-up.

8 DUAL indicator

This lights orange when recording in dual

recording mode.

9 4CH indicator

This lights orange when recording in 4-channel

recording mode.

0 REC indicator

This blinks when in recording standby and

lights red when recording.

q 1/L knob and PEAK indicator

w Input switch (1/L)

e 2/R knob and PEAK indicator

r Input switch (2/R)

t 3-4 knob and PEAK indicator

y . button

u Stop(8) [HOME] button

i / button

o 7 (playback) button

p SLATE button

Press and hold during playback to record a slate

stone.

a 0 (record) button

Left side panel

NOTE

Do not apply excessive force when plugging

in external devices to connect them to this

unit or during use. In particular, be careful

when using a standard-to-mini plug adapter,

because the application of unintended force

could result in damage to the device.

s 1/L connector (XLR/TRS)

d 3-4 connector (3.5mm stereo mini jack)

f 2/R connector (XLR/TRS)

g CAMERA IN connector (3.5mm stereo mini

jack)

h REMOTE connector (2.5mm TRS jack)

j CAMERA OUT (LOW) volume control

k CAMERA OUT (LOW) connector (3.5mm

stereo mini jack)

TASCAM DR-60DMKII

9

Right side panel

NOTE

Do not apply excessive force when plugging

in headphones and external devices to

connect them to this unit or during use. In

particular, be careful when using a standard-

to-mini plug adapter, because the appli-

cation of unintended force could result in

damage to the device.

l SD card slot

; button

z HOLD switch

x USB port

c PHONES volume control

v PHONES jack (3.5mm stereo mini jack)

b CAMERA OUT (HIGH)/LINE OUT volume

control

n CAMERA OUT (HIGH)/LINE OUT jack

(3.5mm stereo mini jack)

Rear panel

m Battery compartment cover

, Battery compartment

Top panel

. DSLR attachment bracket

/ DSLR mounting screw (1/4-inch)

Bottom Panel

! Tripod mounting threads (1/4-inch)

@ Video camera pin hole

10

TASCAM DR-60DMKII

Home Screen

This is the screen that is usually shown when the unit

is stopped.

CAUTION

When the monitoring function is on, some

meters, icons and other items will change to

recording screen appearance.

1 Monitoring mode

This shows what audio is now being monitored.

Indicator Meaning

MIX

Mix of channels 1-4,

or dual recording mode main file

SUB Dual recording mode sub file

1+2 Mix of channels 1-2

3+4 Mix of channels 3-4

CAM CAMERA IN jack sound input

CH1 Channel 1 sound input

1-M

Left channel of dual recording

mode main file

1-S

Left channel of dual recording

mode sub file

Indicator Meaning

CH2 Channel 2 sound input

2-M

Right channel of dual recording

mode main file

2-S

Right channel of dual recording

mode sub file

CH3 Channel 3 sound input

3-M

Left channel of dual recording

mode main file

3-S

Left channel of dual recording

mode sub file

CH4 Channel 4 sound input

4-M

Right channel of dual recording

mode main file

4-S

Right channel of dual recording

mode sub file

2 Repeat playback setting

Single playback

Single file repeat playback

All file repeat playback

3 Playback area

ALL: All files in the MUSIC folder

FOLDER: All files in the selected folder

4 Current playback file number/total number

of files

This shows the current file number and total

number of files in the current playback area.

5 Elapsed time

This shows the elapsed time (hours: minutes:

seconds) of the current file.

6 Power supply status

When a battery is being used, a battery icon

shows the amount of power remaining in bars

( , , ).

The battery is almost dead and the power will

soon turn off (standby) if the icon has no bars

.

When using the PS-P515U AC adaptor (sold

separately) or USB bus power, appears.

7 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

8

Stopped

9

Paused

7

Playing back

,

Searching forward

m

Searching backward

/

Skipping forward

.

Skipping backward

8 Level meter

These show the levels of the input and playback

signals.

TASCAM DR-60DMKII

11

9 Track status display

This icon changes according to the recording

mode.

Indicators

(examples)

Meaning

Playing a file recorded in MONO

or STEREO mode

/ /

/

Monitoring in MONO mode

/ Monitoring in STEREO mode

/

Playing a file recorded in DUAL

MONO or DUAL ST mode or

monitoring in these modes

Playing a file recorded in 4CH

mode or monitoring in this

mode

0 Playback position display

The current playback position is shown by a bar.

q File name

This shows the name of the file playing back

unless there are multiple files recorded in

4-channel recording mode or dual recording

mode.

w Remaining time

This shows the elapsed time (hours: minutes:

seconds) of the current file.

e Level align status

: Level align function off

: Level align function on

r Playback equalizer status

: Playback equalizer off

: Playback equalizer on

t Peak value in decibels (dB)

The maximum level that occurs in a fixed period

of time is displayed digitally.

Preparation

Powering the unit

8

Using AA batteries

1.

Remove the battery compartment cover on the

back of the unit.

2.

Install 4 AA batteries with their ¥ and ^

marks as shown in the battery compartment .

3.

Close the battery compartment cover.

•

Use the

BATTERY TYPE

item of the

SYSTEM

menu to set the type of battery in order to

accurately show the amount of power remaining

and allow the unit to accurately determine

whether enough power is available for proper

operation. (By default, this is set to

ALKAL

for

alkaline batteries.)

Starting up the unit

To start up the unit from the stopped state, press and

hold the button until “TASCAM DR-60DMKII”

(start-up screen) is displayed on the display.

The Home Screen appears when the unit starts up.

Setting the built-in clock

When the unit is started up for the first time (or when

the built-in clock is reset after being left unused

without batteries), the

DATE/TIME

screen appears

before the start-up screen to allow the date and time

to be set.

Shutting down (putting the unit

in standby)

Press and hold the button until “LINEAR PCM

RECORDER” appears on the display.

The power turns off after the unit completes its

shutdown (standby) process.

12

TASCAM DR-60DMKII

Inserting SD cards

1.

Open the SD card slot/USB port cover on the

right side of the unit.

2.

Insert the SD Card into the slot as shown in the

following illustration until it clicks into place.

Camera connection and

attachment

In order to output the sound from this unit to a DSLR

camera and monitor sound from the camera with

this unit, you must connect them with commercial-

ly-available 3.5mm stereo mini plug cables.

1.

If you want to record audio from this unit with

a camera, connect the CAMERA OUT (LOW)

jack on the left side of this unit with the external

mic input on the camera.

If you want to input audio from the camera and

monitor it with this unit, connect the CAMERA

IN jack on the left side of this unit with the

audio output jack on the camera.

DSLR camera

Audio

output jack

External mic

input jack

NOTE

•

If the output is not loud enough even when

the CAMERA OUT (LOW) volume is set as

high as possible, connect it to the CAMERA

OUT (HIGH)/LINE OUT jack, and use the

CAMERA OUT (HIGH)/LINE OUT volume to

adjust the output level.

•

Refer to the camera’s operation manual to

identify this connector on the camera.

2.

Use the CAMERA OUT (LOW) volume control

on the left side of the unit to adjust the level

output to the camera.

3.

To mount the camera on this unit, use the

camera attachment screw on the top of the

unit.

Connecting monitors and

headphones

To listen with headphones, connect them to the

PHONES jack.

To listen with an external monitoring system

(powered monitor speakers or an amplifier and

speakers), connect it to the CAMERA OUT (HIGH)/

LINE OUT jack.

Headphones

Powerd monitor speakers

or amplifer and speakers

TASCAM DR-60DMKII

13

Basic operation procedures

1.

Press the MENU button to open the

MENU

Screen.

2.

Turn the DATA dial to select a menu item

(highlighted), and press the DATA dial or /

button to move to various settings screens.

3.

Turn the DATA dial to select a menu item

(highlighted) to be set.

4.

Press the DATA dial or / button to move

the cursor to highlight the value of the setting.

5.

Turn the DATA dial to change the setting.

6.

Press the DATA dial or . button to set a

different item in the same menu.

This enables you to select a new item. Turn the

DATA dial again to select an item to be set.

7.

Repeat step 3 to 6 as necessary to set each

item.

8.

To open the

MENU

screen (or

OTHERS

submenu

screen), press the MENU button. To return to

the Home Screen, press the stop (8) [HOME]

button.

Menu structure

MENU

REC MODE Make recording settings

INPUT SETTING Make input settings

REC SETTING Make recording settings

AUTO REC

Set the auto-recording

function

PLAY SETTING Make playback settings

BROWSE

Work with files and folders

on the SD card

OTHERS

Open the OTHERS

submenu

INFORMATION View information

FILE NAME Make file name settings

DATE/TIME Set the date and time

SYSTEM Make system settings

Recording

Recording Screen

1 Monitoring mode

This shows what audio is now being monitored.

Indicator Meaning

MIX

Mix of channels 1-4,

or dual recording mode main file

SUB Dual recording mode sub file

1+2 Mix of channels 1-2

3+4 Mix of channels 3-4

CAM CAMERA IN jack sound input

CH1 Channel 1 sound input

1-M

Left channel of dual recording

mode main file

1-S

Left channel of dual recording

mode sub file

CH2 Channel 2 sound input

2-M

Right channel of dual recording

mode main file

2-S

Right channel of dual recording

mode sub file

14

TASCAM DR-60DMKII

Indicator Meaning

CH3 Channel 3 sound input

3-M

Left channel of dual recording

mode main file

3-S

Left channel of dual recording

mode sub file

CH4 Channel 4 sound input

4-M

Right channel of dual recording

mode main file

4-S

Right channel of dual recording

mode sub file

2 Prerecording or Auto recording function

status

appears when the prerecording function is

ON, and in recording standby.

appears when the auto recording function

is ON, and recording.

3 Recording format

This shows the file recording format.

WAV16, WAV24, BWF16 or BWF24

4 Recording sampling frequency

This shows the file recording sampling

frequency.

44.1kHz, 48kHz or 96kHz

5 Elapsed recording time

The elapsed recording time of the file appears

as hours: minutes: seconds.

6 Number of recording channels

This shows the number of recording channels

in the file.

ST or MONO

7 Auto tone function status

No icon: Auto tone off

: Auto tone on

8 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

09

Recording standby or Recording

paused

0

Recording

Self-timer recording activated

9 Input source

This icon shows the input source.

Indicators

(examples)

Meaning

/ /

/

Mono recording mode input

source

/

Stereo recording mode input

source

/

Dual recording mode input

source and gain setting for the

second recording (0 to –12)

4-channel recording mode

input source

0 Recording level meters

The input signal level is shown.

q File name

The file name that will automatically be given

to the recorded file is shown.

w Remaining recording time

The remaining recording time on the SD card is

shown in hours: minutes: seconds according to

the recording mode, sampling frequency and

recording format settings.

e Low cut filter status

: Low cut filter off

: Low cut filter on

r Limiter function status

: Limiter off

: Limiter on

t SLATE button setting

: SLATE button disabled

: SLATE button enabled

y Peak value in decibels (dB)

Peak input level values are shown digitally.

TASCAM DR-60DMKII

15

About recording standby

This unit has a recording standby function like that of

a professional recorder. In recording standby mode,

you can adjust the input level, for example, and then

start recording quickly.

When in recording standby, the REC indicator blinks

and the recording screen appears.

Menu structure

You can make various settings with the

REC

SETTING

item on the

MENU

screen.

REC SETTING

FORMAT Set the file format

BWF: 16/24-bit,

WAV: 16/24-bit

SAMPLE Set the sampling frequency

44.1kHz, 48kHz, 96kHz

SIZE Set the maximum file size

64MB, 128MB, 256MB,

512MB, 1GB, 2GB

SELF TMR Set the self timer function

OFF, 2sec, 10sec

MONITOR Enabling monitoring

OFF, ON

Adjusting the input level

1.

Press the MENU button to open the

MENU

screen.

2.

Turn the DATA dial to select

INPUT SETTING

,

and press the DATA dial or / button to

open the

INPUT SETTING

screen.

INPUT SETTING

screen appears.

3.

Turn the DATA dial to set the

GAIN

for each

channel, and press the DATA dial or /

button.

Ch1 INPUT SETTING

screen

4.

Turn the DATA dial to set the mic input gain.

Options:

MUTE

,

LOW

(default value),

MID

,

HIGH

,

HI+PLUS

5.

When finished making the setting, press the

stop (8) [HOME] button to return to the

Home Screen.

6.

Press the record (0) button to begin recording

standby.

The record indicator flashes red and the

recording screen appears.

7.

Use the 1/L, 2/R and 3-4 knobs on the front of

the unit to adjust the input levels.

If the input levels are too high, the peak

indicators to the left of the 1/L, 2/R and 3-4

knobs light red.

A b mark is provided at -12dB on the level

meters. Set the input level so that the indicator

bars move to and fro with this mark at about

the center without causing the 1/L knob, 2/

R knob, 3-4 knob PEAK indicator to light red

when the loudest sounds occur.

8.

When finished making the setting, press the

stop (8) [HOME] button to exit recording

standby.

Using the limiter

When the limiter is on, the mic input gain will be

adjusted automatically according to the input level

to set the recording level so that distortion does not

occur even when loud sounds are input.

1.

Press the MENU button to open the

MENU

screen.

2.

Turn the DATA dial to select

INPUT SETTING

,

and press the DATA dial or / button to

open the

INPUT SETTING

screen.

INPUT SETTING

screen appears.

3.

Turn the DATA dial to select

LIMITER

for

a channel, and press the DATA dial or /

button.

Ch1 INPUT SETTING

screen

16

TASCAM DR-60DMKII

4.

Turn the DATA dial to set the limiter for mic

input.

Options Meaning

OFF

(default value)

Limiter off

MONO

Limiter on only for selected

channel

LINK

Limiter on for both selected

and linked channels

5.

When finished making the setting, press the

stop (8) [HOME] button to return to the

Home Screen.

Using the low-cut filter

Use the low-cut filter if you want to cut noise and

other sounds at low frequencies. This function

can be used to reduce air-conditioning noise and

unpleasant wind noise, for example.

1.

Press the MENU button to open the

MENU

screen.

2.

Turn the DATA dial to select

INPUT SETTING

,

and press the DATA dial or / button to

open the

INPUT SETTING

screen.

INPUT SETTING

screen appears.

3.

Turn the DATA dial to select

LOW CUT

for

a channel, and press the DATA dial or /

button.

Ch1 INPUT SETTING

screen

4.

Turn the DATA dial to select the cut off

frequency of the low cut filter for mic input.

Options: OFF (default value), 40Hz, 80Hz, 120Hz

5.

When finished making the setting, press the

stop (8) [HOME] button to return to the

Home Screen.

Overview of recording modes

This recorder has five recording modes.

Use the

REC MODE

item on the

REC MODE

screen

to set the recording mode. The settings available are

different for each recording mode.

MONO mode

This is a mode for mono recording.

STEREO mode (default value)

This is a mode for stereo recording of two

independent left and right channels.

DUAL MONO mode

This mode uses one input source to create files at

two different input levels (set on

INPUT SETTING

screen). Two mono files will be recorded.

DUAL ST mode

This mode uses one input source to create files at

two different input levels (set on

INPUT SETTING

screen). Two stereo files will be recorded.

4CH mode

This mode records 4 external inputs in two pairs as

two stereo files.

Two stereo files will be recorded.

TASCAM DR-60DMKII

17

Recording (MONO/STEREO

recording)

8

Make recording settings

1.

Press the MENU button to open the

MENU

screen.

2.

Turn the DATA dial to select

REC MODE

, and

press the DATA dial or / button to open the

REC MODE

screen.

REC MODE

screen appears.

3.

Turn the DATA dial to select

REC MODE

, and

press the DATA dial or / button.

4.

Turn the DATA dial to set it to

MONO

or

STEREO

(default value:

STEREO

).

5.

Press the DATA dial or . button to select

the other item.

6.

Turn the DATA dial to select

SOURCE

, and press

the DATA dial or / button.

7.

Turn the DATA dial to select the input source.

REC

MODE

SOURCE

(options)

Meaning

MONO

CH1

Channel 1 mono

recording

CH2

Channel 2 mono

recording

CH3

Channel 3 mono

recording

CH4

Channel 4 mono

recording

REC

MODE

SOURCE

(options)

Meaning

STEREO

CH1/2

Channel 1 and 2

stereo recording

CH3/4

Channel 3 and 4

stereo recording

8.

Press the DATA dial or . button to select

the other item.

9.

If

REC MODE

is set to

STEREO

, you can also set

MS mic decoding.

To use a mid-side mic, turn the DATA dial to

select

MS MODE

, and press the DATA dial or

/ button.

10.

Turn the DATA dial to set the decoding mode

when using a mid-side mic.

Options Meaning

OFF Record in ordinary stereo mode.

REC

Use to decode while recording.

Playback is conducted without

decoding.

MONITOR

Record mid-side mic output

without decoding for decoding

later. Use this mode to monitor

when recording with a mid-side

mic.

Use this also when playing back

mid-side files that were recorded

without decoding.

11.

When finished making the setting, press the

stop (8) [HOME] button to return to the

Home Screen.

8

Set where to save the file

1.

Press the MENU button to open the

MENU

screen.

2.

Turn the DATA dial to select

BROWSE

, and press

the DATA dial or / button.

BROWSE

screen appears.

3.

Select (highlight) the folder where you want to

save the recorded file on the

BROWSE

screen,

and press the QUICK button to open the quick

menu pop-up.

4.

Turn the DATA dial to select (highlight)

SELECT

, and press the DATA dial.

5.

This sets the selected folder as the folder where

recorded files are saved and reopens the Home

Screen.

18

TASCAM DR-60DMKII

8

Starting the recording

1.

Press the record (0) button to begin recording

standby.

The screen shows the recording file name, the

input source, the recording audio file type and

sampling frequency. Please confirm that these

are as desired before starting recording.

2.

To start recording, press the record (0) button

again.

When recording starts, the REC indicator

lights continuously, and the display shows the

elapsed recording time and the remaining

recording time.

3.

Press the stop (8) [HOME] button to end

recording and create the audio file.

To pause recording, press the record (0)

button. Press the record (0) button or play

(7) button again to restart recording in the

same file.

If you press the stop (8) [HOME] button

after pausing a recorded audio file up to the

moment that you paused recording is created.

Playback

Adjusting the playback volume

Use the PHONES and CAMERA OUT (HIGH)/LINE

OUT volume controls to adjust the levels output

from the PHONES and CAMERA OUT (HIGH)/LINE

OUT jacks.

Playback

When the Home Screen is open and playback

is stopped, press the play (7) button to start

playback.

8

Pausing

When the Home Screen is open and a file is playing

back, press the stop (8) [HOME] button to pause

playback at the current position.

8

Stopping

When the Home Screen is open and a file is playing

back, press the stop (8) [HOME] button to pause

playback, and press the stop (8) [HOME] button to

return to the beginning of the file.

8

Rewinding and fast-forwarding

(search)

When the Home Screen is open and a file is playing

back or stopped, press and hold the . or /

button to rewind or fast-forward and search the

playback file.

8

Changing the playback position

When the Home Screen is open and playback is

stopped or paused, turn the DATA dial to change

the playback position.

Playback will be paused after the position is changed.

Selecting files for playback

(skipping)

When the Home Screen is open, press the . and

/ buttons to select the file for playback.

If you press the . button when the playback

position is located at the middle of a file, it will return

to the beginning of that file. If you press the .

button when located at the beginning of a file, the

playback position will skip to the beginning of the

previous file.

If you press the / button when located at

the beginning of or middle of a file, the playback

position will skip to the beginning of the next file.

Menu structure

You can make various settings with the

PLAY

SETTING

item on the

MENU

screen.

PLAY SETTING

AREA Set the file selection area

ALL FILES, FOLDER

REPEAT Set the repeat mode

CONTINUOUS, SINGLE,

1 REPEAT, ALL REPEAT

JUMPBACK Set jump-back playback

OFF, 1–10sec, 20sec, 30sec

TASCAM DR-60DMKII

19

Quick Operations

QUICK button overview

The QUICK button provides convenient access to

functions according to the situation.

Screen State Quick menu contents

Home

Screen

Stop/

Pause

Delete/divide file, level

align, playback EQ and

mic input gain

Playback

Level align, playback EQ

and mic input gain

Recording

Standby/

Recording

Mic input gain

BROWSE

screen

Operations for the

selected file of folder

MENU

screen,

OTHERS

screen,

Other settings screens

No function

MIXER

screen Mic input gain

Connecting with a Computer

You can transfer audio files on the SD card in the unit

to a computer, as well as transfer audio files from the

computer to the unit.

Connecting with a computer

using USB

1.

Use the included USB cable to connect the unit

to a computer. If the power is off, turn it on.

2.

On the

USB SELECT

screen, select

STORAGE

,

and press the 7 button to connect this unit to

the computer. “USB connected” will appear on

the display.

3.

This unit appears on the computer screen as an

external volume named “DR-60DMK2.”

Exchanging files with a

computer

Click the “DR-60DMK2” drive on the computer screen

to show the “MUSIC” and “UTILITY” folders.

To transfer files to the computer, open the “MUSIC”

folder and drag and drop the desired files to destina-

tions of your choice.

To transfer files from the computer, drag and drop

the audio files on the computer that you want to the

"MUSIC" folder.

Disconnecting from a computer

Before disconnecting the USB cable, use the proper

procedures for the computer to unmount this unit.

The power turns off after the unit completes its

shutdown process.

See the computer’s operation manual for instruc-

tions about how to unmount an external volume.

Settings and Information

System Settings

Use the

SYSTEM

menu to make various settings to

use the unit as you like. You can also initialize settings

and format SD cards, for example.

1.

Select

MENU

w

OTHERS

w

SYSTEM

and

press the 7 button.

2.

Make the necessary settings using the various

functions.

20

TASCAM DR-60DMKII

Quick reference for using various functions

•

Button names are shown like this: MENU.

•

Instructions are abbreviated. For example, On the Home Screen, press the MENU button. select the

REC SETTING

menu, and then select the

PRE REC

item

becomes: Home Screen w MENU w

REC SETTING

w

PRE REC

.

•

Not all steps are given for complex operations. For detailed operation procedures, see the Reference Manual.

Category Desired action Function name Procedures, buttons used and explanation

Basic

functions

Return to the Home Screen

stop (8) [HOME]

Return to the Home Screen if you become unsure about how to proceed.

Record

Home Screen w record (0) w record (0)

Recording will start using the current settings.

Play back a recording

Home Screen w play (7)

Play the file shown (selected).

Adjust the playback volume

PHONES volume, CAMERA OUT (HIGH)/LINE OUT volume

Adjust the volume of headphones, speakers, etc.

Select a file for playback

Home Screen w . and /

If there a many files, using the browse function might be more convenient.

Recording

Change the file format

Home Screen w MENU w

REC SETTING

w

FORMAT

Set the recording file format to BWF, WAV, etc.

Using the low-cut filter Low cut filter

Home Screen w MENU w

INPUT SETTING

w

LOW CUT

This function removes noise and other sounds at low frequencies. Set the cutoff frequency.

Set the input gain

Home Screen w MENU w

INPUT SETTING

w

GAIN

Set the input gain.

Adjust the input level

manually

Home Screen w RECORD w 1/L, 2/R, 3-4

Watch the meters and set the recording level so that they do not peak.

Adjust the input level

automatically

Limiter

Home Screen w MENU w

INPUT SETTING

w

LIMITER

This function compresses only loud sounds to prevent overloads and does not change the recording

level.

Other

recording

features

Add a mark during recording Mark

Recording Screen w DATA

This function adds a mark to the file that can be used as an index during playback.

Create a new file manually

while recording

Manual track

incrementation

Recording Screen w /

Use this function if you want to create a new file without interrupting recording when, for example, the

song changes.

ページを読み込んでいます...

Tascam DR 60D MKII 取扱説明書

関連論文

その他の書類