Yealink One Talk CP960 クイックスタートガイド

タイプ
クイックスタートガイド

このマニュアルも適しています

Quick Start Guide (V30.22)
www.yealink.com
Applies to firmware version 73.30.0.20 or later.
ZOOM
Yealink CP960 for Zoom Rooms
1
Package Contents
PoE Adapter
(Optional)
CP960 Zoom Rooms
Edition
Note: The CPW90 helps you to expand the audio range of the IP phone. For more information, refer to Yealink CPW90 Quick
Start Guide.
We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party
accessories may result in poor performance.
Overview of Yealink Solution for Zoom Rooms
Note: The CP960 should be powered by PoE adapter (54V/0.56A) or PoE switch. All devices are powered separately.
The cable should be replaced at once if its skin is broken.
Ethernet Cable
(7.5m CAT5E UTP cable)
Quick Start Guide
CP Wireless Expansion Mic CPW90
(Optional)
Charging Cradle
0.3m
Micro USB Cable
Quick Start Guide
Wireless Expansion Mic
Power Cord
Ethernet Cable
(2m CAT5E FTP cable)
PSE
X 2
CP Wired Expansion Mic CPE90
(Optional)
X 2
If you did not purchase the product package, Yealink Plug-in for Zoom Rooms and Zoom
Rooms app should be installed on the MCore.
The CP960 with Zoom Rooms version, can communicate with the MCore connected to
the same LAN and can be used as Zoom Rooms controller, speaker and microphone.
Make sure your phone and MCore can access the Internet.
(UVC80 can be replaced by UVC50/UVC30)
VCH InternetHDMIHDMI 5V
DC19V
5V
Display
HDMI
USB2.0
HDMI
MCore
...
Local Area Network
USB2.0
MShare
Type-B
1.2m
Mini-DP Cable
or
1.2m
HMDI Cable
(Optional)
Yealink CP960
PoE
CPW90
(Optional)
Ethernet Cable
Display
UVC80
2
1a. Connect the power and wired network.
7.5m
2m
2(Optional).Connect
and register
the wireless microphone.
1
2
0.3m
Micro USB Cable
1
2
Step
3
Put the CPW90 on the charging cradle.
Connect the micro USB port on the charging cradle to the USB
port on the CP960 using a 0.3m USB cable.
The CPW90 enters the registration mode automatically.
And the mute LED indicator on the CPW90 fast flashes yellow.
Swipe down from the top of the CP960 touch screen and then
tap Settings->MIC-> .
Long press the mute key on the CPW90 for 5 seconds.
The CPW90 is registered with the CP960 conference phone
automatically.
4
Note: For more information about the instructions of Mute LED indicator on the CPW90, refer to Yealink CPW90 Quick Start
Guide.
1b. Connect the power and wireless network.
7.5m
Wi-Fi
Refer to
Wireless Network Connection
mentioned
below in
Configuring Your Phone
for more
information.
Assembling the Pohne
3
Microphone
Mute Indicator LED
Mute Indicator LED
Speaker
Touch Screen
Volume(+) Touch Key
Home Touch Key
Volume(-) Touch Key
Microphone
Microphone
Network Port
USB Port
USB Port
Micro USB Port
3.5mm Audio-out Port
Security Slot
Hardware Component Instructions
4
Pairing Yealink Plug-in for Zoom Rooms with Your Phone
Before using CP960 as the Zoom Rooms controller, you need to pair the CP960 (preload the Zoom Rooms
Controller) with the MCore (preload the Zoom Rooms app).
Before you begin:
Ensure that the plugin is in operation.
If you did not purchase the packaged product package, Yealink Plug-in for Zoom Rooms and Zoom
Rooms app should be installed on the MCore.
Procedure
1. After the MCore is powered on, the Zoom Rooms app will be started automatically.
Starting the MCore for the first time may take a long time to configure the Windows system.
The pairing code will be displayed on the screen. Otherwise, you need to open the Zoom Rooms app
manually.
2. Enter the pairing code on the touch screen of CP960.
Then the CP960 (Zoom Rooms Controller) is paired with the MCore (Zoom Rooms app) successfully.
Using Your Phone as an Audio Input and Output Device
After your phone is paired with the MCore, it can be used as an audio input and output device.
Procedure
1. Tap on the touch screen.
2. Disable Lock Settings.
You need to enter the room password to change the setting.
5
Using Your Phone as Zoom Rooms Controller
After your phone is paired with the Yealink Plug-in for Zoom Rooms, it can be used as a Zoom Rooms
Controller.
Signing into your Zoom account on your phone
1. Tap Sign In on the touch screen.
2. Enter the email and password.
3. Tap Sign In.
The account is signed into the Zoom Room app synchronously.
Signing out of your Zoom account from your phone
1. Tap ->Sign Out on the touch screen.
2. Enter the password to sign out.
3. Tap OK.
Basic features on the home screen of the phone:
After you sign into an account on your phone, more features are available on the phone.
-Meet Now
: Tap
Meet Now
to create an instant meeting.
-Join:
Tap
Join to join a meeting by entering the meeting ID or
personal link name.
-Phone:
Tap
Phone to place a call.
-Presentation:
Tap
Presentation to start a presentation.
- :
Tap to check the status of the connected microphone, speaker and
camera and configure basic settings.
You can also view the Controller version, Zoom Rooms version
and Controller IP at the path
->About
.
3. Tap the Microphone field and then select Echo Cancelling Speakerphone(Yealink CP960
Speakerphone) as your audio input device from the SOURCE field.
4. Tap the Speaker field and then select Echo Cancelling Speakerphone(Yealink CP960 Speakerphone)
as your audio output device from the SOURCE field.
6
Swipe down from the top of the screen to enter the device setting screen.
Wireless Mic icon and the number of
the connected wireless microphones
Tap to clear all notifications
Time and Date
Display notifications
Tap the icon to turn the function on
or enter the corresponding function screen
Swipe left or right to delete a notification
Device Settings of the CP960
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap
Status
to obtain the IP address of the phone.
3. Open a web browser on your computer, enter the IP address into the address bar (for example.,
"http://192.168.0.10" or “192.168.0.10”).
4. Enter the user name (default: admin) and password (default: admin) in the login page and then click
Login.
Network Settings:
Click Network->Basic->IPv4 Config
.
You can configure the network settings in the following ways:
DHCP:
By default, the phone attempts to contact a DHCP server in your network to obtain its valid
network settings, for example, IP address, subnet mask, gateway address and DNS address.
Static IP:
If the phone cannot contact a DHCP server for any reason, you need to configure IP address,
subnet mask, gateway address, primary DNS address and secondary DNS address for the phone
manually.
Note: The IP phone also supports IPv6, but IPv6 is disabled by default.
The wrong network settings may result in inaccessibility to your phone and may have an impact on the network
performance. Contact your system administrator for more information.
Customizing
Time&Date:
Click Settings->
Time&Date
.
7
Configuring via phone user interface
Network Settings:
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap Settings->Advanced Settings (default password: admin)->Network->WAN Port/Wi-Fi Port/
VLAN/Webserver Type/802.1x/VPN/LLDP/CDP/NAT to configure the network.
Customizing your phone:
Swipe down from the top of the screen to enter the device setting screen.
Configuring Language and input:
Ta p
Settings->
Language & Input
.
Configuring
Time&Date
:
Ta p
Settings->
Time & Date
.
Setting Backlight Active Level
: Ta p
Settings->Display->Backlight->Active Level.
Setting Backlight Time
: Ta p
Settings->Display->Backlight->Backlight Time.
Setting Screensaver Wait Time:
Ta p
Settings->Display->Screen Saver->Screensaver Waiting Time.
Selecting the Screensaver Type:
Ta p
Settings->Display->Screen Saver.
Using Hybrid Mode
1. On the device setting screen, tap
Settings
->
Advanced Settings
(default password: admin).
2. Turn
Hybrid Mode
on.
It prompts that if you are sure to switch mode.
3. Tap
OK
.
This configuration will take effect after a reboot.
Yealink Solution for Zoom Rooms supports the hybrid mode that allows you to switch between SIP mode
and Zoom Rooms mode to experience Zoom video conferences as well as SIP calls and conferences.
In SIP mode, you can use basic call features, including placing/answering calls, initiating a conference,
recording calls, and so on.
Enabling the Hybrid Mode
Procedure
Switching Between SIP Mode and Zoom Rooms Mode
After the hybrid mode is enabled, you can switch between SIP mode and Zoom Rooms mode quickly on the
phone when you are not in a call.
Procedure
1. Under the Zoom Rooms mode, tap the floating circle to switch to the SIP mode.
2. Under the SIP mode, tap the floating circle or tap the
Zoom Rooms
app icon to switch back to the
Zoom Rooms mode.
Wireless Network Connection:
1. On the device setting screen, tap
Settings
->
Wi-Fi
.
2. Turn
Wi-Fi
on.
The phone will automatically search for available wireless networks in your area.
3. Tap an available wireless network from the list of networks.
4. If the network is secure, enter its password in the Password field and then tap
Connect
.
包装清单
PoE电源
(可选)
Zoom Rooms特制CP960
说明:我们推荐使用由Yealink提供或经Yealink认可的配件使用未经认可的第三方配件可能会导致性能的下降。
7.5米
UTP超五类以太网线
快速入门指南
CP有线扩展麦
(可选)
2米
FTP超五类以太网线
PSE
电源线
X 2
局域网
Zoom Rooms版本CP960与接入同一局域网的PC进行通信连接并可作为Zoom Rooms控制器扬声器和麦
克风。
Zoom Rooms解决方案
确保CP960和MCore可访问外网。
如果你没有购买完整的产品包你需要在MCore上预装Yealink插件和Zoom Rooms app。
说明:我们要求使用Yealink原装PoE电源54V/0.56A)使用第三方电源可能会导致话机损坏。
如果电源线或网线破皮请立即更换。
8
VCH InternetHDMIHDMI 5V
DC19V
5V
HDMI
USB2.0
HDMI
MCore
...
USB2.0
MShare
Type-B
(可选)
CP960
PoE
网线
显示器
显示器
1.2米
Mini-DP线
1.2米
HMDI线
(UVC80 可由UVC50/UVC30代替)
UVC80
安装话机
1a. 连接电源和有线网线:
想要了解更多信息请参考配置话机章节中的无线网络连接
7.5
2
1b. 连接电源和无线网线:
7.5
Wi-Fi
2(可选).连接有线扩展麦CPE90。
9
硬件介绍
麦克风
静音指示灯
静音指示灯
扬声器
触摸屏
音量(+)触摸键
主屏触摸键
音量(-)触摸键
麦克风
麦克风
有线扩展麦接口
有线扩展麦接口
网络接口
USB接口
USB 接口
Micro USB接口
3.5mm音频输出接口
安全锁
10
CP960与Zoom Rooms配对
CP960作为Zoom Rooms控制器前你需要将CP960预装Zoom Rooms Controller和 MCore(预装
Zoom Rooms app)配对。
开始之前
确保插件在运行。
如果你没有购买完整的产品包你需要在MCore上预装Yealink插件和Zoom Rooms app。
过程
1. 启动MCore后 Zoom Rooms app会自动启动。
主机第一次启动可能会花费较长时间进行Windows系统配置。
配对码显示在显示器上。若Zoom Rooms app未自动运行你需要手动开启 Zoom Rooms app。
2. 在CP960上输入配对码。
CP960(Zoom Rooms Controller)与MCore(Zoom Rooms app)配对成功。
1. 在CP960上按 。
2. 关闭锁定设置
你需要输入会议室密码才能更改该配置。
将CP960作为音频输入和输出设备
CP960与MCore配对后将作为系统默认的音频输入和输出设备
过程
11
将CP960作为Zoom Rooms控制器使用
3. 选择麦克风在设备列表区域选择Echo Cancelling Speakerphone (Yealink CP960 Speakerphone)
作为音频输入设备。
4. 选择扬声器在设备列表区域选择Echo Cancelling Speakerphone (Yealink CP960 Speakerphone)
作为音频输出设备。
将CP960作为Zoom Rooms控制器使用
CP960与MCore配对后可作为Zoom Rooms控制器使用。
在CP960上登录Zoom Rooms账号
过程
1. 按登录
2. 输入电子邮件地址密码
3. 按登录
账号同时自动登录Zoom Room app。
在CP960上登出Zoom Rooms账号
过程
1. 按 ->退出登录
2. 输入会议室密码退出登录。
3. 按确定
-开始会议:开始会议创建一个即时会议。
-加入: 按 加入通过输入会议ID或个人标签加入会议。
-电话: 按 电话呼出一路通话。
-演示:演示开始共享屏幕。
- 按 检查已连接麦克风扬声器和摄像头的状态并配置
相关设置。
在 ->关于路径下你还可以查看控制器版本 Zoom
Rooms版本和控制器IP。
-控制摄像机 会议中按控制摄像机可调整摄像机焦距和角度。
CP960上可操作的基本功能:
在CP960上登录帐户后你可以使用以下基本功能:
12
CP960话机设备设置中心
从屏幕顶部向下滑动进入设备设置中心。
显示无线麦图标和连接的无线麦个数
删除所有通知消息
时间和日期
显示所有通知消息
按相应的图标快速开启或关闭对应的功能或
进入功能设置界面
向左或向右滑动某一通知消息删除该消息
配置话机
通过Web界面配置话机
访问Web界面
1. 从屏幕顶部向下滑动进入设备设置中心。
2. 按状态查看话机的IP地址。
3. 打开电脑上的网页浏览器在地址栏里输入话机的IP地址 例如: http://192.168.0.10或192.168.0.10
Enter键。
4. 在登录界面的输入用户名默认密码:admin和密码默认密码:admin 点击登录
网络配置:点击网络配置->基础->IPv4配置
你可以通过以下方式配置网络:
DHCP:话机默认通过DHCP服务器获取网络配置。例如:IP地址、子网掩码、网关和DNS服务器。
静态IP:如果话机无法通过DHCP服务器获取网络配置你需要手动配置IP地址、子网掩码、网关、首DNS
服务器和备选DNS服务器。
说明:话机的网络配置也支持IPv6协议但IPv6默认是关闭的。
错误的网络设置会导致网络不可用也可能对网络的性能造成影响。请咨询你的系统管理员了解更多信息。
自定义话机:在网页界面点击设置->日期时间设置日期和时间。
13
无线网络连接:
1. 在话机设备设置中心界面点击设置->无线网络
2.开启无线网络
话机将自动搜索附近可用的Wi-Fi。
3.从可用的网络列表中选择一个Wi-Fi。
4. 如果要连接一个加密的网络密码区域中输入密码再按连接
通过话机界面配置CP960
网络配置:
1. 从屏幕顶部向下滑动进入设备设置中心。
2.按设置->高级设置默认密码:admin->网络->WAN端口/Wi-Fi Port/ VLAN/网页访问类型/802.1x/VPN/
LLDP/CDP/NAT为话机配置网络。
自定义话机:
从屏幕顶部向下滑动进入设备设置中心。
设置语言和输入法
设置->语言和输入法
设置时间和日期: 设置->时间和日期
设置背光灯亮度:设置->显示
->
背光灯
->
背光灯亮度
设置背光灯激活时间:设置->显示
->
背光灯
->
背光灯激活时间
设置屏保激活时间:设置->显示
->
屏幕保护
->
屏保激活时间
选择屏保类型:设置->显示
->
屏幕保护
使用混合模式
亿联Zoom Rooms解决方案支持混合模式使你可以在SIP模式和Zoom Rooms模式之间任意切换让你既
可以体验Zoom视频会议也可以使用SIP通话和会议
SIP模式下 你可以使用基本通话功能包括拨打、接听电话、发起会议、录制呼叫等。
开启混合模式
过程
1. 在话机设备设置中心界面点击设置->高级设置默认密码:admin
2.开启混合模式
界面提示模式切换会设备重新启动是否确认继续。
3.按确定
话机重启后配置生效。
切换SIP模式与Zoom Rooms 模式
启用混合模式后你可以在非通话状态下快速切换SIP模式和Zoom Rooms模式。
过程
1. 在Zoom Rooms模式下按悬浮球切换至SIP模式。
2. 在SIP模式下按悬浮球或桌面的Zoom Rooms app图标切换至Zoom Rooms模式。
14
Regulatory Notices
Web: www.yealink.com
Copyright©2020 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.
About Yealink
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we
sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing
service to worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation.
With the outstanding technical patents of cloud computing, audio, video and image processing technology, Yealink has built
up a panoramic collaboration solution of audio and video conferencing by merging its cloud services with a series of endpoints
products. As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink
ranks No.1 in the global market share of SIP phones shipments.
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements
of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
430104001327
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Yealink One Talk CP960 クイックスタートガイド

タイプ
クイックスタートガイド
このマニュアルも適しています

他の言語で