USB Screen Sharing Adapter
MShare
Quick Start Guide(V1.4)
www.yealink.com
English | 简体中文
Package Contents
1
MShare
3M
Cable Tie Mounting Base×2
Cable Ties×2
×4
7m
USB Cable
(for content sharing)
Velcro×2
MShare
Quick Start Guide
MShare Connection
MINI DP HDMI
PC
Mini-PC
HDMI HDMI
(for wired sharing)
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in poor performance.
The Front of MShare
The Side of MShare
WPP20
(for wireless sharing)
Wireless Sharing
WPP20
Wireless Presentation Pod
PC
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs to
be purchased separately.
Make sure the MShare is connected to the mini-PC.
Procedure
1. Connect the WPP20 to the USB port of the MShare.
2. Wait for about 3 seconds, the WPP20 LED indicator glows
solid green.
The WPP20 is paired with the MShare successfully.
3. Connect the WPP20 to the PC.
4. If the WPP20 is first connected to the computer, you need to manually start the Yealink Wireless
Presentation Pod software from This PC in Windows 10 or from My Computer in Windows 7
and then upgrade the WPP20.
After starting the software, if it prompts that the firmware is different from the host version, you
need to upgrade the WPP20 according to the prompts.
1.2m HDMI Cable and
1.2m Mini-DP Cable
2. Put the MShare on the surface such as
table, wall and so on.
MShare Installation
LED Indicator Instructions
LED Status
Slow-flashing red
Solid green
Fast-flashing yellow MShare is upgrading firmware.
Description
Failed to upgrade firmware.
MShare is not connected to a PC or you do not use WPP20
for content sharing.
LED Indicator of
Working Status
Solid yellow
MShare is connected to a PC for content sharing via
HDMI/Mini-DP or you use WPP20 for content sharing.
Solid red MShare is in sleep mode.
2
1. Stick the velcros on the back of MShare.
3. Attach the cable tie mounting base onto a surface.
Fix the cables with the cable tie.
cable
cable tie
cable tie mounting base
LED Status
Solid green
Description
The WPP20 has been paired with the MShare and is
connected to a PC for content sharing
.
Wi-Fi AP LED Indicator
Solid red
MShare is in sleep mode.
Solid yellow The WPP20 is not connected to the MShare.
For older versions of WPP20, after starting the software, you need to manually upgrade the firmware
on the software at the path of ->Version Update.
After the upgrade is successful, the WPP20 is ready for content sharing.
Go to Yealink website(http://support.yealink.com) for the latest version of the firmware.
3
MShare
3M背胶固定座×2
扎带×2
×4
7米USB线
魔术贴×2
MShare 快速入门指南
连接MShare
MINI DP HDMI
PC
Mini-PC
HDMI HDMI
(分享有线辅流)
MShare正面
MShare侧面
WPP20
(分享无线辅流)
无线辅流分享内容
WPP20
无线传屏助手
PC
你可以使用WPP20无线传屏助手进行无线辅流分享内容。WPP20需要单独购买。
分享内容前，确保MShare已正确连接在mini-PC上。
过程
1. 将WPP20 连接到MShare的USB口.
2. 约3秒后，WPP20指示灯显示绿色常亮。
WPP20与MShare配对成功。
3. 将WPP20连接到电脑上。
4. 首次将WPP20连接到电脑，你需要从计算机（Windows7）或从此电脑（Windows10）中手动
启动亿联无线传屏器软件并升级固件。
启动软件后，如果软件提示固件版本与主机不同，根据提示完成WPP20固件升级。
对于旧版本的WPP20，启动软件后，你需要在软件上的 ->版本升级升级固件。
升级成功后，可以进行内容分享。
包装清单
我们推荐使用由Yealink提供或经Yealink认可的配件和线缆，使用未经认可的第三方配件和线缆
可能会导致性能的下降。
(用于分享辅流)
若需最新版本固件，请前往亿联技术支持官网（http://support.yealink.com/下载。
1.2米 HDMI线和
1.2米 Mini-DP线
2. 将MShare放置在平面上。
安装MShare
MShare指示灯
指示灯状态
红色慢闪
绿色常亮
正在升级固件。
说明
固件升级失败。
MShare未通过HDMI线/Mini-DP线连接电脑或没有使用
WPP20进行无线辅流分享内容。
工作状态指示灯
黄色常亮
MShare通过HDMI线/Mini-DP线连接电脑进行有线辅流
分享内容或使用WPP20进行无线辅流分享内容。
MShare进入休眠模式。
4
1. 将魔术贴贴在MShare背面。
3. 将背胶固定座固定在平面上，并用扎带扎紧线材。
线材
扎带
背胶固定底座
WPP20与MShare已配对并连接在电脑上可进行辅流分享。
Wi-Fi AP 指示灯
WPP20未连接到MShare。
指示灯状态 说明
红色常亮
黄色快闪
绿色常亮
黄色常亮
红色常亮 MShare进入休眠模式。
Regulatory Notices
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
All adapter devices comply with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
Web: www.yealink.com
Copyright
©2019
YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD
.All rights reserved.
MSha r e- EN+CN
About Yealink
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video
conferencing service to worldwide enterprises. Focusing on research and development, Yealink also insists on
innovation and creation. With the outstanding technical patents of cloud computing , audio, video and image
processing technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing by
merging its cloud services with a series of endpoints products. As one of the best providers in more than 140
countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP
phones shipments.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more.
For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit
all your technical issues.
/