Yealink Yealink MVC400 for Microsoft Teams Rooms System (EN, CN) V1.0 クイックスタートガイド
- タイプ
- クイックスタートガイド
Yealink Network Technology CO., LTD
Yealink MVC
400
for Microsoft Teams Rooms System
Quick Start Guide (V1.0)
V32.35
English | 简体中文
We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in poor performance.
Package Contents
For more information about the installation and deleployment of accessories (for example, the installation of the MCore package or
the UVC40 camera), refer to the Quick Start Guide of corresponding accessory.
When starting up the system for the first time,you need to connect a mouse to complete the initial configuration.
We recommend using the wireless mouse and keyboard kit.
1
MVC400 Connection
VCH InternetHDMIHDMI 5V
DC19V
5V
Display
Display
HDMI
Ethernet Cable
USB2.0
MTouchⅡ
USB Tpye-C Cable
(with an HDMI adapter)
HDMI
MCore
CAT5e
UVC40
×4
×2
×2
UVC40 Package (Camera)
AAA Battery×2UVC 40
VCR20
Remote Control
2.5m
USB Cable
Cable Tie×5
Mounting Bracket
and Accessories
Power Adapter
Silicone Pad×2
UVC40
Quick Start Guide
MCore Package (Mini-PC)
Bracket
1.8M
HDMI Cable×2
Velcro×2MCore
Power Adapter
MCore
Quick Start Guide
Screwdriver
4
4
Expansion Screw
and Machine Screw
(M3×8 screw)
×2
MTouchⅡ Package (Touch Console)
MTouchⅡ
MTouchⅡ
Quick Start Guide
7.5m
Ethernet Cable
USB Tpye-C Cable
(with an HDMI adapter)
Screwdriver
(M3×8 screw)
×2
Resetting the Camera to Home Position
1. Tap to enter the
Camera Control
page.
2
Tap
Reset
.
Procedure
Controlling the Camera Position
1. Tap to enter the Camera Control page.
2. Tap or to zoom camera in/out.
3. Tap the arrow keys to pan/tilt the camera.
Procedure
If the Auto Framing feature is enabled, you can not control the camera.
Enabling/Disabling Tracking Mode
1. Tap to enter the Camera Control page.
2. Select .
3. Select Auto Framing or Speaker Tracking from the Tracking Mode field.
Procedure
2
Wireless Sharing
WPP20
Wireless Presentation Pod
PC
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs
to be purchased separately.
Make sure the MTouch
Ⅱ
is connected to the MCore.
Procedure
1. Connect the WPP20 to the USB port of the MTouch
Ⅱ
.
2. Wait for about 3 seconds, the WPP20 LED indicator glows
solid green.
The WPP20 is paired with the MTouch
Ⅱ
successfully.
3. Connect the WPP20 to the PC.
3
Upgrading System Software through Windows Update
Enabling Automatically Windows Update
Procedure
1. On the display screen, navigate to
More->
Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5
. Tap the Start button, and then go to
Settings->Upgrade & Security->Windows Update
, and
select
Advanced options
.
6. Enable
Automatically download updates, even over metered data connections
(charge may apply)
.
The system software(including the Windows, the UVC40 and the MTouchⅡ) can be automatically
upgraded via windows update by default.
Otherwise, you can enable automatically windows update or upgrade the devices manually.
The software upgrade is only supported by the operating system of 64-bit Windows 10.
Manually Windows Update
Procedure
1. On the display screen, navigate to
More
->Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Do one of the following:
Long tap the Start button, and then select
Device Manager
.
Select the desired device and then long tap the device to select
Update driver
.
Select a desired way to update.
Tap the Start button, and then n
avigate to
Settings->Upgrade & Security->Windows Update
,
and select
Check for updates
.
Select the desired device and then complete the installation.
4
连接MVC400
显示器
USB Tpye-C线
(带HDMI转接头）
VCH InternetHDMIHDMI 5V
DC19V
5V
HDMI
USB2.0
MTouchⅡ
HDMI
MCore
CAT5e
UVC40
网线
显示器
更多关于如何安装和部署配件(例如安装MCore或UVC40摄像机)，请参阅相应配件的快速入门指南。
首次启动时，你需要在MCore上连接一个鼠标来完成系统初始化配置，我们推荐使用无线键鼠套装。
包装清单
VCR20遥控器 7号电池x2UVC40 2.5米USB线
束线带x5
UVC40
快速入门指南
支架配件
（用于安装主机）
电源适配器
×4
×2
×2
硅胶垫x2
UVC40套件(摄像机)
MCore套件（Mini-PC）
MCore
快速入门指南
MCore 挂架版
1.8M
HDMI 线×2
螺丝刀魔术贴x2电源适配器 膨胀螺丝和机械螺丝
4
4
(M3×8 screw)
×2
MTouchⅡ套件(触控平板)
MTouchⅡ
快速入门指南
7.5米网线
USB Tpye-C线
（带HDMI转接头）
MTouchⅡ
螺丝刀
(M3×8 screw)
×2
我们推荐使用由Yealink提供或经Yealink认可的配件和线缆，使用未经认可的第三方配件和线缆可
能会导致性能的下降。
5
无线辅流分享内容
WPP20
无线传屏助手
PC
你可以使用WPP20无线传屏助手进行无线辅流分享内容。WPP20需要单独购买。
分享内容前，确保MTouchⅡ已正确连接在MCore上。
过程
1. 将WPP20连接到MTouchⅡ的USB口。
2. 约3秒后，WPP20指示灯显示绿色常亮。
WPP20与MTouchⅡ配对成功。
3. 将WPP20连接到电脑上。
恢复摄像头到主位置
1.
按
进入摄像机控制界面。
2.
按重置
。
控制摄像头位置
1. 按 进入摄像机控制界面。
2. 按 或 调整摄像机的焦距。
3. 按方向键调整摄像机角度。
过程
过程
开启/关闭摄像机追踪模式
1. 按 进入摄像机控制界面。
2. 选择
。
3. 在智能取景区域选择自动框人像或语音追踪
过程
摄像机开启智能取景功能后，无法控制摄像头。
6
仅64位Windows 10操作系统支持软件升级。
开启Windows自动更新
过程
1. 在显示屏上, 按更多->设置。
2. 输入管理员密码（默认：sfb）进入设置界面。
3. 按 Windows设置。
4. 从左下角选择Administrator帐户，并输入管理员帐户密码（默认：sfb）。
5
.
按开始菜单，选择设置->更新和安全->Windows更新, 再按高级选项。
6. 开启自动下载更新，即使通过按流量计费的数据连续也是如此（可能会收费）。
手动更新升级设备
过程
1. 在显示屏上, 按更多->设置。
2. 输入管理员密码（默认：sfb）进入设置界面。
3. 按 Windows设置。
4. 从左下角选择Administrator帐户，并输入管理员帐户密码（默认：sfb）。
5.
执行以下任一操作：
长按开始菜单， 选择设备管理器。
选择并长按需要更新的设备，并选择更新驱动程序。
选择需要更新的方式。
按开始菜单，选择设置->更新和安全->Windows更新, 选择检查更新。
选择需要更新的设备，并完成安装。
通过Windows更新系统
系统软件(包括Windows, UVC40和 MTouchⅡ)默认情况下可以通过windows 自动更新升
级。如果设备软件没有自动升级，你可以启用自动windows自动更新或手动升级设备。
Regulatory Notices
About Yealink
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service,
we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to
worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding
technical patents of cloud computing, audio, video and image processing technology, Yealink has built up a panoramic collaboration
solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best
providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market
share of SIP phones shipments.
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright
©2020 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD
.All rights reserved.
430104001334
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Yealink Yealink MVC400 for Microsoft Teams Rooms System (EN, CN) V1.0 クイックスタートガイド
- タイプ
- クイックスタートガイド
他の言語で
関連論文
-
Yealink Yealink MTouchⅡ (EN, CN) V1.1 クイックスタートガイド
-
-
-
-
Yealink MeetingBar A20 Microsoft Team Video Bar ユーザーガイド
-
-
Yealink WPP20 クイックスタートガイド
-
-
-