Yealink Yealink ZVC Series Zoom Rooms Kit V30.22 (EN, CN) クイックスタートガイド

タイプ
クイックスタートガイド
V32.35
English | 简体中文
Yealink ZVC Series Zoom Rooms Kit
Yealink ZVC Series Zoom Rooms Kit Quick Start Guide
Yealink Network Technology CO., LTD
V30.22
1
Yealink ZVC800 Zoom Rooms Package
PoE Adapter
CP960 Zoom Rooms
Edition
Ethernet Cable
(7.5m CAT5E UTP cable)
Quick Start Guide
CP Wireless Expansion Mic CPW90
Charging Cradle
0.3m
Micro USB Cable
Quick Start Guide
Wireless Expansion Mic
Power Cord
Ethernet Cable
(2m CAT5E FTP cable)
PSE
X 2
CP960 Package
Yealink ZVC500 Zoom Rooms Package
MCore Package
Bracket
1.8M
HDMI Cable×2
Velcro×2MCore
Power Adapter Screwdriver
+
+
4
4
Expansion Screw
and Machine Screw
MCore
Quick Start Guide
(M3×8 screw)
×2
MShare
3M
Cable Tie Mounting Base×2
Cable Ties×2
×4
1.2m HDMI Cable and
1.2m Mini-DP Cable
7m
USB Cable
(for content sharing)
Velcro×2
MShare
Quick Start Guide
(Optional) MShare Package
UVC80
UVC80
Quick Start Guide
2.5m
USB Cable
Power Adapter
48V/0.7A
Mounting Bracket
and Accessories
Cable Tie×5
VESA Accessory
(1/4”-20 UNC screw)
(T4×30 screw)
(M3×8 screw)
7.5m
Ethernet Cable
Velcro×2
UVC80 Package (Camera)
(One Velcro is on the bracket)
Camera Lens
Privacy cover
VCR20
Remote Control
Package Contents
UVC50
2.5m
USB Cable
Power Adapter
48V/0.7A
VESA Accessory
Mounting Bracket
and Accessories
UVC50
Quick Start Guide
Cable Tie×5
(1/4”-20 UNC screw)
(T4×30 screw)
(M3×8 screw)
7.5m
Ethernet Cable
Velcro×2
UVC50 Package (Camera)
(One Velcro is on the bracket)
Camera Lens
Privacy cover
VCR20
Remote Control
2
CP960 Package
UVC30 Room
Quick Start Guide
UVC30 Room Package
Yealink ZVC300 Zoom Rooms Package
CP960 Package
Camera Lens
Privacy Cover
UVC30 Room
3m
PoE Adapter
CP960 Zoom Rooms
Edition
Ethernet Cable
(7.5m CAT5E UTP cable)
Quick Start Guide
Charging Cradle
0.3m
Micro USB Cable
Quick Start Guide
Wireless Expansion Mic
Power Cord
Ethernet Cable
(2m CAT5E FTP cable)
PSE
X 2
PoE Adapter
CP960 Zoom Rooms
Edition
Ethernet Cable
(7.5m CAT5E UTP cable)
Quick Start Guide
(Optional) CP Wireless Expansion Mic CPW90
Charging Cradle
0.3m
Micro USB Cable
Quick Start Guide
Wireless Expansion Mic
Power Cord
Ethernet Cable
(2m CAT5E FTP cable)
PSE
X 2
MCore Package
Bracket
1.8M
HDMI Cable×2
Velcro×2MCore
Power Adapter Screwdriver
+
+
4
4
Expansion Screw
and Machine Screw
(M3×8 screw)
×2
MCore Package
Bracket
1.8M
HDMI Cable×2
Velcro×2MCore
Power Adapter Screwdriver
+
+
4
4
Expansion Screw
and Machine Screw
MCore
Quick Start Guide
(M3×8 screw)
×2
Mounting Bracket
and Accessories
Screwdriver
1
2
2
MCore
Quick Start Guide
MShare
3M
Cable Tie Mounting Base×2
Cable Ties×2
×4
1.2m HDMI Cable and
1.2m Mini-DP Cable
7m
USB Cable
(for content sharing)
Velcro×2
MShare
Quick Start Guide
(Optional) MShare Package
(Optional) CP Wireless Expansion Mic CPW90
3
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may
result in poor performance.
The CP960 with Zoom Rooms version, can communicate with the MCore connected to the same LAN
and can be used as Zoom Rooms controller, speaker and microphone.
Yealink Plugin for Zoom Rooms and Zoom Rooms app have been installed on the MCore.
And the UVC80/UVC50/UVC30 camera is Plug-and-play.
Make sure your phone and MCore can access the Internet.
The CP960 should be powered by PoE adapter (54V/0.56A) or PoE switch. All devices are powered separately.
The cable should be replaced at once if its skin is broken.
(UVC80 can be replaced by UVC50/UVC30)
VCH InternetHDMIHDMI 5V
DC19V
5V
Display
Display
HDMI
USB2.0
UVC80
HDMI
MCore
...
Local Area Network
USB2.0
MShare
Type-B
1.2m
Mini-DP Cable
or
1.2m
HMDI Cable
(Optional)
Yealink CP960
PoE
CPW90
(Optional)
Ethernet Cable
MShare
3M
Cable Tie Mounting Base×2
Cable Ties×2
×4
1.2m HDMI Cable and
1.2m Mini-DP Cable
7m
USB Cable
(for content sharing)
Velcro×2
MShare
Quick Start Guide
(Optional) MShare Package
Overview of Yealink Solution for Zoom Rooms
4
2(Optional).Connect the wireless microphone.
1
2
0.3m
Micro USB Cable
For convenience, we recommend that you connect a wireless USB dongle to the back of the MCore to use mouse and keyboard to
manage devices.
1a. Connect the power and wired network.
7.5m
2m
1b. Connect the power and wireless network.
7.5m
Wi-Fi
Refer to Wireless Network Connection mentioned
below in Configuring Your CP960 for more
information.
1
2
Step
3
Put the CPW90 on the charging cradle.
Connect the micro USB port on the charging cradle
to the USB port on the CP960 using a 0.3m USB cable.
The CPW90 enters the registration mode automatically.
And the mute LED indicator on the CPW90 fast flashes yellow.
Swipe down from the top of the CP960 touch screen and then
tap Settings->MIC-> .
Long press the mute key on the CPW90 for 5 seconds.
The CPW90 is registered with the CP960 conference phone
automatically.
4
For more information about the instructions of Mute LED indicator on the CPW90, refer to Yealink CPW90 Quick Start Guide.
Internet
Display/Projector
Display/Projector
USB device
USB device
UVC80/UVC50/UVC30
USB device
For more information on how to assemble and install the MCore, refer to Yealink MCore Quick Start Guide (EN, CN).
Assembling the CP960
Connecting the MCore
5
Pairing the Zoom Rooms with CP960
Before using CP960 as the Zoom Rooms controller, you need to pair the CP960 (preload the Zoom
Rooms Controller) with the MCore (preload the Zoom Rooms app).
Ensure that the plugin is in operation.
Procedure
1. After the MCore is powered on, the Zoom Rooms app will be started automatically.
The pairing code will be displayed on the screen. Otherwise, you need to open the Zoom Rooms
app manually.
Starting the MCore for the first time may take a long time to configure the Windows system, and
you need to connect the wireless keyboard and mouse to complete the initial configuration.
2. Enter the pairing code on the touch screen of the CP960.
Then the CP960 (Zoom Rooms Controller) is paired with the MCore (Zoom Rooms app) successfully.
Using CP960 as an Audio Input and Output Device
1. Tap on the touch screen.
2. Disable Lock Settings.
You need to enter the room password to change the setting.
3. Tap the Microphone field and then select Echo Cancelling Speakerphone (Yealink CP960
Speakerphone) as your audio input device from the SOURCE field.
After your phone is paired with MCore, it can be used as a default audio input and output device for
the system.
Procedure
6
Generally, you can use the Yealink solution for Zoom Rooms after pairing your phone with the MCore
and setting your phone as an audio input and output device.
For more information on your phone and Yealink Plugin for Zoom Rooms, read below.
4. Tap the Speaker field and then select Echo Cancelling Speakerphone (Yealink CP960
Speakerphone) as your audio output device from the SOURCE field.
Using CP960 as Zoom Rooms Controller
After your phone is paired with the MCore, it can be used as a Zoom Rooms controller.
Signing into your Zoom account on your phone
1. Tap Sign In on the touch screen.
2. Enter the email and password.
3. Tap Sign In.
The account is signed into the Zoom Room app synchronously.
Signing out of your Zoom account from your phone
1. Tap ->Sign Out on the touch screen.
2. Enter the password to sign out.
3. Tap OK.
Basic features on the home screen of the phone:
After you sign into an account on your phone, more features are available on the phone.
-Meet Now: Tap
Meet Now to create an instant meeting.
-Join: Ta p
Join
t
o join a meeting by entering the meeting ID or
personal link name.
-Phone: Ta p
Phone
to place a call.
-Presentation: Ta p
Presentation
to start a presentation.
-
: Tap
to check the status of the connected microphone, speaker
and camera, and configure basic settings.
You can also view the Controller version, Zoom Rooms version
and Controller IP at the path of ->About.
-Camera Control: During a meeting, tap Camera Control to control
the camera.
7
Configuring Your CP960
Configuring via web user interface
Accessing the web user interface:
1. Swipe down from the top of the screen to enter the device setting screen.
2. Tap Status to obtain the IP address of the phone.
3. Open a web browser on your computer, enter the IP address into the address bar (For example.,
"http://192.168.0.10" or “192.168.0.10”).
4. Enter the user name (default: admin) and password (default: admin) in the login page and then click
Login.
Network Settings: On the web user interface, click
Network->Basic.
Customizing your phone: On the web user interface, click Settings to configure the time and date.
Click Settings->Preference to set the backlight active level and time.
Network Setings: On the device setting screen, tap Settings->Advanced Settings (default password:
admin)->Network.
Wireless Network Connection:
1. On the device setting screen, tap Settings->Baisc Settings->Wi-Fi.
2. Turn Wi-Fi on.
The phone will automatically search for available wireless networks in your area.
3. Tap an available wireless network from the list of networks.
4. If the network is secure, enter its password in the
Password field and then tap Connect.
Setting the signal port of Yealink Plugin: On the device setting screen, tap Settings->
Advanced Settings (default password: admin)->Yealink Plug-in Settings->Signal Port.
Swipe down from the top of the screen to enter the device settingscreen.
Wireless Mic icon and the number of
the connected wireless microphones
Tap to clear all notifications
Time and Date
Display notifications
Tap the icon to turn the function on
or enter the corresponding function screen
Swipe left or right to delete a notification
Device Settings of the CP960:
Customizing your phone:
On the device setting screen, tap Settings->Baisc Settings->
Language & Input to set the language and input for the phone. Tap Settings->Baisc Settings->
Display to set the backlight active level, backlight time, screensaver wait time and screensaver type.
Configuring via phone user interface
8
Using Hybrid Mode
1. On the device setting screen, tap Settings->Advanced Settings (default password: admin).
2. Turn
Hybrid Mode
on.
It prompts that if you are sure to switch mode.
3. Tap
OK.
This configuration will take effect after a reboot.
Yealink Solution for Zoom Rooms supports the hybrid mode that allows you to switch between SIP
mode and Zoom Rooms mode to experience Zoom video conferences as well as SIP calls and
conferences. In SIP mode, you can use basic call features, including placing/answering calls, initiating a
conference, recording calls, and so on.
Enabling the Hybrid Mode
Switching Between SIP Mode and Zoom Rooms Mode
After the hybrid mode is enabled, you can switch between SIP mode and Zoom Rooms mode quickly
on the phone when you are not in a call.
1. Under the Zoom Rooms mode, tap the floating circle to switch to the SIP mode.
2. Under the SIP mode, tap the floating circle or tap the Zoom Rooms app icon to switch back to the
Zoom Rooms mode.
Wireless Content Sharing
WPP20
Wireless Presentation Pod
PC
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs
to be purchased separately.
Make sure the MShare is connected to the MCore.
Procedure
1. Connect the WPP20 to the USB port of the MShare.
2. Wait for about 3 seconds, the WPP20 LED indicator glows
solid green.
The WPP20 is paired with the MShare successfully.
3. Connect the WPP20 to the PC.
9
Devices Management
ZoomRooms account is the default account from which the Zoom Rooms app runs. Only the
ZoomRoomsAdmin account has access to return to the desktop of the MCore to manage the devices.
After switching the user account to ZoomRoomsAdmin, you can enable Windows Update service to
update the devices.
And we also support updating the firmware for CP960 via web user interface or on the Yealink device
management platform. For more information on how to update a batch of phones on the Yealink device
management platform, please go to http://support.yealink.com, and then click Download->Service->
Device Management Platform/Management Cloud Service to see the administrator guide.
Switching to the ZoomRoomsAdmin Account
1. Press Ctrl+Alt+Delete and then select Sign out.
2. Click the ZoomRoomsAdmin account from the bottom-left corner and then enter the
pasword (default: zoom123) to return to the desktop of the MCore.
The default password required to switch back to the ZoomRooms account is zoom123.
Enabling Windows Update Service
1. Open a command prompt Windows on your MCore.
2. Type services.msc, and press Enter.
3. Find Windows Update service, and double-click to open Properties.
4. Enable Windows Update service from the Startup tpye field.
5. Click OK.
Update the Devices
The devices can be upgrade manually or can be automatically upgraded if you enable automatically
Windows Update.
Enabling Automatically Windows Update
1. Click the Start button, and then go to Settings->Upgrade & Security->Windows Update, and
select Advanced options.
2. Enable Automatically download updates, even over metered data connections (charge may
apply).
Manually Windows Update
1. Do one of the following:
Press the Windows key + X or right-click the Start to open the Power User Menu.
Click Device Manager.
Right click the desired device and then select Update driver.
Select a desired way to update.
Click the Start button, and then go to Settings->Upgrade & Security->Windows Update, and
select Check for updates.
Select the plugin or UVC80/UVC50/UVC30 camera and then complete the installation.
包装清单
亿联 ZVC800 Zoom Rooms 产品包
10
PSE
X 2
CP960套件
Zoom Rooms特制CP960
7.5米
UTP超五类以太网线
快速入门指南
CP有线扩展麦
2米
FTP超五类以太网线
电源线
PoE电源
亿联 ZVC500 Zoom Rooms 产品包
MCore套件
MCore
快速入门指南
MCore 挂架版
1.8M
HDMI 线×2
螺丝刀魔术贴x2电源适配器 膨胀螺丝和机械螺丝
+
+
4
4
(M3×8 screw)
×2
VCR20遥控器
(1/4”-20 UNC screw)
(T4×30 screw)
(M3×8 screw)
UVC80套件(摄像机)
2.5m
USB 线
电源适配器
48V/0.7A
VESA 配件
UVC80
7.5m 网线
UVC80
快速入门指南
(一套已贴在支架上
魔术贴x2
束线带x 5
支架配件
(用于安装主机
镜头隐私盖
可选MShare套件
×4
MShare
1.2米 HDMI线和
1.2米 Mini-DP线
7米USB线
(用于内容分享)
3M背胶固定座×2
扎带×2
魔术贴×2
MShare
快速入门指南
(1/4”-20 UNC screw)
(T4×30 screw)
(M3×8 screw)
UVC50套件(摄像机)
2.5m
USB 线
电源适配器
48V/0.7A
VESA 配件
UVC50
7.5m 网线
UVC50
快速入门指南
(一套已贴在支架上
魔术贴x2
束线带x 5
支架配件
(用于安装主机
镜头隐私盖
VCR20遥控器
11
亿联 ZVC300 Zoom Rooms 产品包
UVC30 Room套件(摄像机)
镜头盖
UVC30 Room
3m
UVC30
快速入门指南
PSE
X 2
CP960套件
Zoom Rooms特制CP960
7.5米
UTP超五类以太网线
快速入门指南
(可选) CP有线扩展麦
2米
FTP超五类以太网线
电源线
PoE电源
MCore套件
MCore
快速入门指南
MCore 挂架版
1.8M
HDMI 线×2
螺丝刀魔术贴x2电源适配器 膨胀螺丝和机械螺丝
+
+
4
4
(M3×8 screw)
×2
PSE
X 2
CP960套件
Zoom Rooms特制CP960
7.5米
UTP超五类以太网线
快速入门指南
(可选) CP有线扩展麦
2米
FTP超五类以太网线
电源线
PoE电源
MCore套件
MCore
快速入门指南
MCore 挂架版
1.8M
HDMI 线×2
螺丝刀魔术贴x2电源适配器 膨胀螺丝和机械螺丝
+
+
4
4
(M3×8 screw)
×2
螺丝刀支架和配件
1
2
2
可选MShare套件
×4
MShare
1.2米 HDMI线和
1.2米 Mini-DP线
7米USB线
(用于内容分享)
3M背胶固定座×2
扎带×2
魔术贴×2
MShare
快速入门指南
12
Zoom Rooms解决方案
Zoom Rooms版本CP960与接入同一局域网的PC进行通信连接并可作为Zoom Rooms控制器扬声器和
麦克风。
Yealink插件和Zoom Rooms app预装在MCore上。UVC80/UVC50/UVC30摄像机即插即用。
确保CP960和MCore可访问外网。
我们要求使用Yealink原装PoE电源 54V/0.56A所有设备单独供电
如果电源线或网线破皮请立即更换。
VCH InternetHDMIHDMI 5V
DC19V
5V
HDMI
USB2.0
UVC80
HDMI
MCore
局域网
...
(UVC80 可由UVC50/UVC30代替)
网线
USB2.0
MShare
Type-B
1.2米
Mini-DP线
1.2米
HMDI线
(可选)
Yealink CP960
PoE
显示器
显示器
我们推荐使用由Yealink提供或经Yealink认可的配件和线缆使用未经认可的第三方配件和线缆可能会导致性能的下降。
可选MShare套件
×4
MShare
1.2米 HDMI线和
1.2米 Mini-DP线
7米USB线
(用于内容分享)
3M背胶固定座×2
扎带×2
魔术贴×2
MShare
快速入门指南
13
安装CP960话机
1a. 连接电源和有线网线。
2(可选).连接有线扩展麦CPE90。
想要了解更多信息请参考配置话机章节中的无线网络连接。
7.5
2
1b. 连接电源和无线网线:
7.5
Wi-Fi
连接MCore
我们推荐你将无线USB dongle连接到MCore以便使用无线鼠标和键盘操作。
网口
USB设备
显示设备
UVC80/UVC50/UVC30
USB设备
USB设备
显示设备
更多关于如何组装和的更多信息安装MCore请参阅 Yealink MCore Box Quick Start Guide(EN, CN)。
14
CP960与Zoom Rooms配对
将CP960作为音频输入和输出设备
1. 在CP960上按 。
2. 关闭锁定设置
你需要输入会议室密码才能更改该配置。
CP960与MCore配对后CP960将作为系统默认的音频输入和输出设备。
过程
3. 选择麦克风在设备列表区域选择Echo Cancelling Speakerphone (Yealink CP960 Speakerphone)
作为音频输入设备。
9
CP960作为Zoom Rooms控制器前你需要将CP960预装Zoom Rooms Controller和 MCore
(预装Zoom Rooms app)配对。
确保插件在运行。
过程
1. 启动MCore后 Zoom Rooms app会自动启动。
配对码显示在显示器上。若Zoom Rooms app未自动运行你需要手动开启 Zoom Rooms。
主机第一次启动可能会花费较长时间进行Windows系统配置,你需要连接无线键鼠完成初始配置。
2. 在CP960上输入配对码。
CP960 (Zoom Rooms Controller) 与MCore (Zoom Rooms app)配对成功。
15
1
将CP960作为Zoom Rooms控制器使用
CP960与MCore配对后可作为Zoom Rooms控制器使用。
在CP960上登录Zoom Rooms账号
1. 按登录
2. 输入电子邮件地址密码
3. 按登录
账号同时自动登录Zoom Room app。
在CP960上登出Zoom Rooms账号
1. 按 ->退出登录
2. 输入会议室密码退出登录。
3. 按确定
CP960上可操作的基本功能:
在CP960上登录帐户后你可以使用以下基本功能:
-开始会议:开始会议创建一个即时会议
-加入: 加入通过输入会议ID或个人标签加入会议。
-电话: 电话呼出一路通话
-演示: 演示开始共享屏幕。
- :
按 检查已连接麦克风扬声器和摄像头的状态并基本设置。
在 ->关于路径下你还可以查看控制器版本 Zoom Rooms版本
和控制器IP。
-控制摄像机: 会议中按控制摄像机可调整摄像机焦距和角度。
正常情况下CP960与MCore配对并将CP960设置为音频输入和输出设备后你可以开始
使用Zoom Rooms解决方案。
有关CP960和Yealink插件的更多信息请阅读以下内容
4. 选择扬声器在设备列表区域选择Echo Cancelling Speakerphone (Yealink CP960 Speakerphone)
作为音频输出设备。
配置CP960
16
通过Web界面配置CP960
访问Web界面
1. 从屏幕顶部向下滑动进入设备设置中心。
2. 按状态查看话机的IP地址。
3. 打开电脑上的网页浏览器在地址栏里输入话机的IP地址 例如: http://192.168.0.10或
192.168.0.10Enter键。
4. 在登录界面的输入用户名默认密码:admin)和密码默认密码:admin 点击登录
自定义话机:在网页界面点击设置你可以设置日期和时间;点击设置->优先设置背光灯激活亮度等级
和背光灯时间。
网络配置: 在网页界面点击网络配置->基础你可以为话机配置网络。
从屏幕顶部向下滑动进入设备设置中心。
显示无线麦图标和连接的无线麦个数
删除所有通知消息
时间和日期
显示所有通知消息
按相应的图标快速开启或关闭对应的功能或
进入功能设置界面
向左或向右滑动某一通知消息删除该消息
CP960话机设备设置中心
网络配置: 在话机设备设置中心界面点击设置->高级设置默认密码:admin)->网络为话机配置网络。
无线网络连接:
1. 在话机设备设置中心界面设置->基础设置->无线网络
2. 开启无线网络
话机将自动搜索附近可用的Wi-Fi。
3. 从可用的网络列表中选择一个Wi-Fi。
4. 如果要连接一个加密的网络密码区域中输入密码再按连接
设置Yealink插件信令端口:在话机设备设置中心界面设置->高级设置默认密码:admin)->
Yealink插件设置->信令端口
自定义CP960: 在话机设备设置中心界面设置->基础设置->语言和输入法设置CP960话机显示
语言和输入法设置->基础设置->显示设置背光灯亮度与激活时间和屏保激活时间
与屏保类型。
通过话机界面配置CP960
使用混合模式
亿联Zoom Rooms解决方案支持混合模式使你可以在SIP模式和Zoom Rooms模式之间任意切换让你
既可以体验Zoom视频会议也可以使用SIP通话和会议。
SIP模式下 你可以使用基本通话功能包括拨打、接听电话发起会议和录制呼叫等。
开启混合模式
过程
切换SIP模式与Zoom Rooms 模式
启用混合模式后你可以在非通话状态下快速切换SIP模式和Zoom Rooms模式。
过程
17
1. 在话机设备设置中心界面设置->高级设置默认密码:admin)
2.开启混合模式
界面提示模式切换会设备重新启动是否确认继续。
3.按确定
话机重启后配置生效。
1. 在Zoom Rooms模式下按悬浮球切换至SIP模式。
2. 在SIP模式下按悬浮球或桌面的Zoom Rooms app图标切换至Zoom Rooms模式。
无线投屏
WPP20
无线传屏助手
PC
你可以使用WPP20无线传屏助手进行无线投屏。WPP20需要单独购买
分享内容前确保MShare已正确连接在MCore上。
过程
1. 将WPP20连接到MShare的USB口
2. 约3秒后WPP20指示灯显示绿色常亮。
WPP20与MShare配对成功。
3. 将WPP20连接到电脑上。
设备管理
切换到ZoomRoomsAdmin帐户
手动更新升级设备
更新设备
你可以通过Windows Update手动更新设备也可以开启自动Windows更新功能自动升级设备。
18
Zoom Rooms会议系统默认使用ZoomRoom帐户只有ZoomRoomsAdmin帐户才有权限返回桌面操作
MCore。 切换到管理员帐户并开启Windows Update服务后你可以手动升级设备或开启自动Windows
Update更新升级设备。
我们还支持在亿联设备管理平台上升级CP960。更多关于如何在设备管理平台上批量升级更新设备,请前往
http://support.yealink.com,选 文档&软件->服务平台->设备管理平台/设备管理云服务查看对应平台
的管理员指南。
1. 按Ctrl+Alt+Delete,选 注销
2. 在界面左下角选择ZoomRoomsAdmin帐户输入密码(默认:zoom123返回桌面
重新切换回ZoomRooms帐户的密码默认也为zoom123。
开启Windows Update服务
1. 在MCore桌面打开命令窗口。
2. 输入services.msc,按 Enter键。
3. 找到Windows Update服务双击打开属性
4. 在启动类型区域开启Windows Update服务。
5. 点击确定
1. 执行以下任一操作:
Windows+X或者右击开始菜单打开
用户高级菜单 选择设备管理器
选择并右击需要更新的设备并选择
更新驱动程序
选择需要更新的方式。
点击开始菜单选择设置->更新和安全->Windows更新, 选择检查更新
选择插件或UVC80/UVC50/UVC30摄像机并完成安装
开启Windows自动更新
1. 点击开始菜单选择
设置->更新和安全->Windows更新, 再按高级选项
2. 开启
自动下载更新即使通过按流量计费的数据连续也是如此可能会收费
YEALINK NETWORK TECHNOLOGY CO., LTD
E-Mail: zoominf[email protected] | Website: www.yealink.com
Regulatory Notices
About Yealink
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend
you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to worldwide enterprises. Focusing on
research and development, Yealink also insists on innovation and creation. With the outstanding technical patents of cloud computing, audio, video and image processing
technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As
one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones
shipments.
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements
of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Radiation Exposure Statement(Only applicable to CP960)
This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
430104001328
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Yealink Yealink ZVC Series Zoom Rooms Kit V30.22 (EN, CN) クイックスタートガイド

タイプ
クイックスタートガイド