Philips AC3259/31 ユーザーマニュアル

1 2

G H I J K L M

B

A

EDC

F

4241 210 98081

AC3259

EN User manual 1 ZH-T 使用手冊

19

3s

1

3

11

7

15

3s

21

3s

19

5

13

9

17

23

6

14

10

18

24

4

12

8

16

3s

22

3s

20

25

3s

29

33

36

27

3s

31

3s

32

28

26

30

34

35

1EN

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product overview (g.a) 5

Controls overview (g.b) 5

3 Getting started 5

Installing lters 5

Wi-Fi setup 6

4 Using the appliance 7

Understanding the air

quality light 7

Switching on and o 7

Changing the Auto mode

setting 7

Changing the fan speed 8

Setting the timer 8

Setting the child lock 8

Using the light on/o function 9

Switching the display mode 9

5 Cleaning 9

Cleaning schedule 9

Cleaning the body of the

appliance 9

Cleaning the air quality

sensor 10

Cleaning the pre-lter 10

6 Replacing the lter 11

Understanding the healthy

air protect lock 11

Replacing the lters 11

Filter type change 12

7 Troubleshooting 13

8 Guarantee and service 16

Order parts or accessories 16

9 Notices 16

Electromagnetic elds (EMF) 16

Recycling 17

Software 17

Environmental friendly paper used. Thanks for your contribution to save trees.

2 EN

1 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or flammable

detergent enter the

appliance to avoid electric

shock and/or a fire

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(flammable) detergent to

avoid electric shock and/

or a fire hazard.

• Do not spray any

flammable materials

such as insecticides or

fragrance around the

appliance.

Warning

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualified persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Child

shall not play with the

appliance. Cleaning and

maintenance shall not be

made by children without

supervision.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

3EN

English

• Make sure that foreign

objects do not fall into the

appliance through the air

outlet.

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum

output power of 31.62 mW

EIRP.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface.

• Leave at least 20cm free

space behind and on both

sides of the appliance

and leave at least 30cm

free space above the

appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or

standing on the appliance

may lead to potential

injury.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all filters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips filters specially

intended for this

appliance. Do not use any

other filters.

• Combustion of the filter

may cause inreversible

human hazard and/or

jeopardize other lives . Do

not use the filter as fuel or

for similar purpose.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

4 EN

• To prevent interference,

place the appliance at

least 2 meters away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• If you need to move the

appliance, disconnect the

appliance from the power

supply first.

• Do not move the

appliance by pulling its

power cord.

• Always lift or move the

appliance by the handle

on top of the appliance.

• Do not insert your fingers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

fireplaces.

• Always unplug the

appliance after use

and before cleaning

or carrying out other

maintenance.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

5EN

English

3 Getting started

Installing lters

Note

• Make sure the air purifier is unplugged

from the electrical outlet before

installing the filters.

• Make sure the side of the filter with the

tag is pointing towards you.

1 Pull the bottom part of the front

panel to remove it from the

appliance (fig.c).

2 Press the two clips down and pull

the pre-filter towards you (fig.d).

3 Remove all filters (fig.e).

4 Remove all packaging materials of

the air purification filters (fig.f).

5 Put the unpacked air purification

filters back into the appliance

(fig.g).

6 Put the pre-filter back into the

appliance (fig.h).

Note

• Make sure that the side with the two

clips is pointing towards you, and that

all hooks of the pre-filter are properly

attached to the purifier.

7 To reattach the front panel, mount

the panel onto the top of the

appliance first (1). Then, gently push

the panel against the body of the

appliance (2) (fig.i).

8 Wash your hands thoroughly after

installing filters.

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Product overview (g.a)

A Control panel

B Air quality light

C Air quality sensors

D NanoProtect Pro S3 filter (FY3137)*

E Pre-filter

F Front panel

Controls overview (g.b)

G On/Off button

H Light on/off button

I Auto mode button

J Display screen

K Fan speed button

L Timer button

M Reset/Child lock button

6 EN

Note

• This instruction is only valid when the

air purifier is being set up for the first

time. If the network has changed or the

setup needs to be performed again,

consult section “Setting up the Wi-Fi

connection when the network has

changed” on page 6.

• If you want to connect more than one

air purifier to your smart device, you

have to do this successively. Complete

the set up of one air purifier before you

turn on the other air purifier.

• Make sure that the distance between

your mobile device and the air

purifier is less than 10 m without any

obstructions.

• This app supports the latest versions of

Android and iOS. Please check

www.philips.com/purifier-compatibility

for the latest update of supported

operating systems and devices.

Setting up the Wi-Fi connection

when the network has changed

Note

• This applies when the default network

to which your purifier is connected has

changed.

1 Put the plug of the air purifier in the

power socket and touch to turn

on the air purifier.

2 Touch and simultaneously for

3 seconds until you hear a beep.

» The air purifier goes to pairing

mode.

» The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting up

the Wi-Fi connection for the first

time" section.

Wi-Fi setup

Setting up the Wi-Fi connection

for the rst time

1 Download and install the 'Air

Matters' app from the App Store or

Google Play.

2 Put the plug of the air purifier in the

power socket and touch to turn

on the air purifier.

» The Wi-Fi indicator blinks

orange for the first time.

3 Make sure that your mobile device

is successfully connected to your

Wi-Fi network.

4 Launch the 'Air Matters' app and

follow the onscreen instructions

to connect the air purifier to your

network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the 'Air Matters'

app for extensive and up-to-date

troubleshooting tips.

7EN

English

Note

• After the appliance is switched off by

the on/off button , if the plug is still

in the power socket, the appliance will

operate under the previous settings

when it is switched on again.

Changing the Auto mode

setting

You can choose the Pollution mode

( ), the Allergen mode ( ) and the

Bacteria/Virus mode ( ).

Pollution mode

The specially designed pollution

mode can effectively remove airborne

pollutants such as PM2.5.

• Touch the Auto mode button to

select the Pollution mode (fig.l).

» Auto(A) and display on the

screen.

Allergen mode

The specially designed Allergen mode

can effectively remove common

allergens such as pollen and pet dander.

• Touch the Auto mode button to

select the Allergen mode (fig.m).

» Auto(A) and display on the

screen.

4 Using the

appliance

Understanding the air

quality light

PM2.5

level

Air quality

light color

Air quality

level

≤12 Blue

Good

13-35 Blue-Purple

Fair

36-55 Purple-Red

Poor

>55 Red

Very poor

The air quality light automatically goes

on when the appliance is switched on,

and lights up all colors in sequence.

In a short time the air quality sensors

select the color that corresponds to the

ambient air quality.

Switching on and o

1 Put the plug of the appliance in the

power socket.

2 Touch to switch on the

appliance (fig.j).

» The appliance operates under

the auto mode by default.

» After measuring the air quality

for a short time, the air quality

sensor automatically selects the

color of the air quality light.

» After measuring the particle

matters in the air, the

icon and the PM2.5 level are

displayed on the screen. (fig.k).

3 Touch and hold for 3 seconds to

switch off the appliance.

8 EN

Bacteria/Virus mode

The specially designed Bacteria & Virus

mode can effectively remove bacteria

& viruses such as staphylococcus albus

and H1N1.

• Touch the Auto mode button to

select the Bacteria & Virus mode

(fig.n).

» Auto(A) and display on the

screen.

Changing the fan speed

There are several fan speeds available.

You can choose the sleep mode ( ),

turbo mode( ) and speed 1, 2, or 3.

Sleep (SL)

In sleep mode, the appliance operates

quietly under speed 1. One minute into

the sleep mode, the power and light

on/off indicators are dimmed, and all

the other lights are off.

• Touch the fan speed button to

select the sleep mode ( ) (fig.o).

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (fig.p).

Turbo (t)

In turbo mode, the appliance operates

under the highest speed.

• Touch the fan speed button to

select the turbo mode ( ) (fig.q).

Setting the timer

With the timer, you can let the

appliance operate for a set number of

hours. When the set time has elapsed,

the appliance will automatically switch

off.

• Touch the timer button

repeatedly to choose the number

of hours you want the appliance to

operate (fig.r).

» The timer is available from 1 to

12 hours.

To deactivate the timer, touch the timer

button repeatedly until displays

on the screen.

Setting the child lock

1 Touch and hold the child lock

button for 3 seconds to activate

child lock (fig.s).

» displays on the screen.

» When the child lock is on,

all the other buttons are not

responsive.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock (fig.t).

» disappears from the screen.

9EN

English

Using the light on/o

function

With the light on/off button, you can

switch on or off the air quality light,

the display screen and the function

indicators if needed.

1 Touch the light on/off button

once, the air quality light, the

display screen and the function

indicators will go off.

2 Touch the light on/off button

again, all lights will be on again.

Switching the display

mode

The air purifier has two display modes:

Indoor Allergen Index (IAI) display

and PM2.5 display mode. When in IAI

mode, the display shows a number

between 1-12 to indicate the level of

airbone allergens. In PM2.5 mode the

display shows the particulate matter 2.5

concentration in the air in µg/m

3

.

Note

• The air purifier operates in PM2.5

display mode by default.

1 Touch the light dimming button

for 3 seconds to switch to IAI

display mode (fig.u).

» The actual IAI level displays on

the screen.

2 Touch the light dimming button

for 3 seconds again to switch back

to PM2.5 display mode (fig.v).

» The PM2.5 level displays on the

screen.

5 Cleaning

Note

• Always unplug the appliance before

cleaning.

• Never immerse the appliance in water

or any other liquid.

• Never use abrasive, aggressive, or

flammable cleaning agents such as

bleach or alcohol to clean any part of

the appliance.

• Only the pre-filter is washable. The air

purification filter is not washable nor

vacuum cleanable.

Cleaning schedule

Frequency Cleaning method

When necessary

Wipe the surface

of the appliance

with a soft dry

cloth

When F0

displays on the

screen

Clean the pre-

filter

Every two

months

Clean the air

quality sensors

Cleaning the body of the

appliance

Regularly clean the inside and outside

of the appliance to prevent dust from

collecting.

1 Wipe away dust with a soft dry cloth

from the body of the appliance.

2 Clean the air outlet with a soft dry

cloth.

10 EN

Cleaning the pre-lter

Clean the pre-filter when F0 is displayed

on the screen(fig.{).

1 Pull the bottom part of the front

panel to remove it from the

appliance (fig.c).

2 Press the two clips down and pull

the pre-filter towards you (fig.d).

3 Wash the pre-filter under a running

tap. If the pre-filter is very dirty, use

a soft brush to brush away the dust

(fig.|).

4 Air dry the pre-filter.

Note

• Make sure that the pre-filter is

completely dry. If it is still wet, bacteria

may multiply in it and shorten the

lifetime of the pre-filter.

5 Put the pre-filter back into the

appliance (fig.h).

Note

• Make sure that the side with the two

clips is pointing towards you, and that

all hooks of the pre-filter are properly

attached to the purifier.

6 To reattach the front panel, mount

the panel onto the top of the

appliance first (1). Then, gently push

the panel against the body of the

appliance (2) (fig.i).

7 Touch and hold the reset button

for 3 seconds to reset the pre-filter

cleaning time (fig.}).

Cleaning the air quality

sensor

Clean the air quality sensor every

2 months for optimal functioning of the

purifier. Clean them more frequently

if you use the purifier in a dusty

environment.

Note

• When the humidity level in the

room is very high, it is possible that

condensation develops on the air

quality sensor. As a result, the air

quality light may indicate that the air

quality is bad even though it is good.

In this case you have to clean the

air quality sensor or use one of the

manual speed settings.

1 Clean the air quality sensor inlet

and outlet with a soft brush (fig.w).

2 Open the air quality sensor cover

(fig.x).

3 Clean the air quality sensor, the

dust inlet and the dust outlet with

a lightly moistened cotton swab

(fig.y).

4 Dry them with a dry cotton swab.

5 Reattach the air quality sensor

cover (fig.z).

11EN

English

6 Replacing the

filter

Understanding the

healthy air protect lock

This air purifier is equipped with a

filter replacement indicator to make

sure that the air purification filter is in

optimal condition when the air purifier

is operating. When the filters need to be

replaced, the filter code displays on the

screen (see Filter alert chart).

If the filters are not replaced in 14 days,

the air purifier will stop operating and

automatically lock to protect the air

quality in the room. Replace the filters

as soon as possible according to the

filter code.

Replacing the lters

Note

• The air purification filters are not

washable nor vacuum cleanable.

• Always turn off the air purifier and

unplug from the electrical outlet

before replacing the filters.

• Do not clean the filters with a vacuum

cleaner.

• If the pre-filter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or contact

the Consumer Care Center in your

country.

Filter alert chart

Filter alert light

status

Follow this

A3 displays on the

screen

Replace

NanoProtect Pro

S3 filter (FY3137)

1 Take out the used air filters

according to the filter code

displayed on the screen. Discard

used filters (fig.~).

Note

• Do not touch the pleated filter surface,

or smell the filter as it has collected

pollutants from the air.

2 Remove all packaging material of

the new filters (fig.f).

3 Place the new filters into the

appliance (fig.g).

4 Put the plug of the appliance in the

wall outlet.

5 Touch and hold the reset button

for 3 seconds to reset the filter

lifetime counter (fig.).

Note

• Wash your hands after changing the

filters.

12 EN

Filter type change

1 Touch and for 3 seconds to

enter the filter type change mode

(fig.€).

» Code (A3) of the NanoProtect

filter Series 3 displays on the

screen.

2 Touch to select the filter code of

the new filter you will use (fig.).

3 Touch and hold for 3 seconds to

confirm the filter code of the new

filter (fig.‚).

Note

• After you have selected the filter code

of the new filter using the button,

if you do not touch any other buttons

in 10 seconds, the appliance will

automatically confirm the filter code of

the new filter.

4 "--" displays on the screen after the

new filter code is confirmed (fig.ƒ).

» If you do not have a second

filter to use in the appliance,

touch and hold for

3 seconds to confirm and exit

the filter type change mode

(fig.„).

13EN

English

7 Troubleshooting

This chapter summarizes the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Center in your country.

Problem Possible solution

The appliance

does not work

even though it is

plugged in..

• Check if the front cover is properly installed.

• The filter replacement code has been displaying on the

screen but you have not replaced the corresponding filter

yet. The appliance will be locked if you keep using the

expired filter. In this case, replace the filter and reset the

filter lifetime counter.

The appliance

does not work

even though it is

switched on.

• Check if the packing materials for the fitlers are removed.

• The appliance is working but the buttons are not

responsive. Check if the child lock is on.

• The filter replacement code has been on continuously but

you have not replaced the corresponding filter, and the

appliance is now locked. In this case, replace the filter and

reset the filter lifetime counter.

The airow that

comes out of

the air outlet

is signicantly

weaker than

before.

• The pre-filter is dirty. Clean the pre-filter (see chapter

"Cleaning").

The air quality

does not improve,

even though the

appliance has

been operating for

a long time.

• One of the filters has not been placed in the appliance.

Make sure that all filters are properly installed in the

following order, starting with the innermost filter:

1) NanoProtect Pro S3 filter (FY3137); 2) pre-filter

• The air quality sensor is wet. The humidity level in your

room is high and causes condensation. Make sure that the

air quality sensor is clean and dry (see chapter "Cleaning").

The color of the air

quality light always

stays the same.

• The air quality sensor is dirty. Clean the air quality sensor

(see chapter "Cleaning").

14 EN

Problem Possible solution

The appliance

produces a strange

smell.

• The filter may produce smell after being used for a

while because of the absorption of indoor gases. It’s

recommended that you reactivate the filter by putting it in

direct sunlight for repeated use. If odor still exists, replace

the filter.

• If the air purifier produces a burnt odor, switch OFF and

unplug from the electrical outlet. Contact Consumer Care

Center in your country.

The appliance is

extra loud.

• If the appliance is too loud, you can change the fan speed

to a lower fan speed level. When using the appliance in a

bedroom at night, choose the sleep mode.

The appliance still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the filter lifetime counter. Plug

in the appliance, touch to switch on the appliance, and

touch and hold the reset button for 3 seconds.

Error codes "E1",

or "E2" displays on

the screen.

• The appliance has malfunctions. Contact the Consumer

Care Center in your country.

Which App I should

download?

• Please download and install the 'Air Matters' app from the

App Store or Google Play.

15EN

English

Problem Possible solution

The Wi-Fi setup is

not successful.

• If the router your purifier is connected to is dual – band

and currently it is not connecting to a 2.4GHz network,

please switch to another band of the same router (2.4GHz)

and try to pair your purifier again. 5GHz networks are not

supported.

• Web authentication networks are not supported.

• Check if the purifier is within range of the Wi-Fi router. You

can try to locate the air purifier closer to the Wi-Fi router.

• Check if the network name is correct. The network name is

case-sensitive.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up the

Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by electromagnetic

or other interferences. Keep the appliance away from other

electronic devices that may cause interferences.

• Check if the mobile device is in airplane mode. Make sure

to have the airplane mode deactivated when connecting

to the Wi-Fi network.

• Consult the help section in the App for extensive and up-

to-date troubleshooting tips.

16 EN

9 Notices

Electromagnetic elds

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

fields.

Compliance with EMF

Koninklijke Philips N.V. manufactures

and sells many products targeted at

consumers, which, like any electronic

apparatus, in general have the ability

to emit and receive electromagnetic

signals.

One of Philips' leading Business

Principles is to take all necessary health

and safety measures for our products,

to comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health effects. Philips

confirms that if its products are handled

properly for their intended use, they

are safe to use according to scientific

evidence available today.

Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments in

standardization for early integration in

its products.

8 Guarantee and

service

If you need information or if you have a

problem, please visit the Philips website

at www.philips.com or contact the

Philips Consumer Care Center in your

country (you find its phone number

in the worldwide guarantee leaflet). If

there is no Consumer Care Centre in

your country, go to your local Philips

dealer.

Order parts or

accessories

If you have to replace a part or want to

purchase an additional part, go to your

Philips dealer or visit www.philips.com/

support.

If you have problems obtaining the

parts, please contact the Philips

Consumer Care Center in your country

(you can find its phone number in the

worldwide guarantee leaflet).

17EN

English

Recycling

Do not throw away the product with

the normal household waste at the

end of its life, but hand it in at an

official collection point for recycling.

By doing this, you help to preserve the

environment.

Follow your country's rules for the

separate collection of electrical and

electronic products. Correct disposal

helps prevent negative consequences

for the environment and human health.

Software

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google

Inc.

This Philips appliance and Air Matters

app applied multiple open source

softwares, copies of open source

software license text used in this

product can be derived from website:

www.philips.com/purifier-compatibility.

ページが読み込まれています...

Philips AC3259/31 ユーザーマニュアル

Philips AC3259/31 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント