Korenix JetCon 3401G Quick Installation Manual
- カテゴリー
- ネットワークメディアコンバータ
- タイプ
- Quick Installation Manual
5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
Support
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS 2.0)
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Connecting to Network
1. Connecting the Ethernet Ports: Connect one end of an Ethernet cable into the UTP port
of JetCon 3401G, while the other end is connected to the attached networking device. e
UTP ports support auto MDI/MDIX function. e Speed LED will turn on for 1000M link
and blinking for 100Mbps link; the LNK/ACT LED will turn on for link up and blinking
for packet transmits and receives.
2. Install Gigabit SFP transceiver and make the connection: Connect the ber port on
your JetCon 3401G to another Gigabit Fiber Ethernet device, by following the gure below.
Wrong connection will cause the ber port not working properly.
e SFP Fiber port supports 2 LEDs for link/activity and full duplex/collision; once the
gigabit ber port is link up, the link LED will be trigger to “ON”.
Installation
Mount the unit
Din-Rail mount: Mount the din-rail clip screwed on the rear of
JetCon 3401G on the DIN rail.
For information about the DIN Rail installation, please refer to user’s manual.
Wiring the Power Inputs
1. Insert the positive and negative wires into
the V+ and V- contact on the terminal block
connector.
2. Tighten the wire-clamp screws to prevent
the DC wires from being loosened. See Figure-1
Notes: e recommended working voltage is DC24V (DC12~ 48V)
Figure-1
Figure-2
Wiring the Relay Output
e relay output alarm contacts are in the middle of
the terminal block connector as shown in gure-3.
By inserting the wires and settings the DIP switch of
the respective alarm function to “ON”, relay output
alarm will detect port or power fault, and form a
short circuit. e alarm relay output is “Normal Open”. See, Figure -2. For more information,
please refer to the chapter 2-4 and 2-5 of user's manual for more detail information.
Maximum 1A current / DC 24V
Alarm
System
Extra Power
System
+ +
PW1P W2Alm 1@ DC24V
Power Event Alm
LLFPort Event Alm
ON: Enable
Wiring the Earth Ground
In an industrial environment, there might be
devices that generate electromagnetic noise, such
as AC motors, electric welding machine, or a
power generator. ese devices will generate
electric noise or surges that might disturb
communications.
To prevent those noises, the device should be well earthed. In the Figure- 3 shows how
to make connection.
Figure-3
Earth Ground
Screw
Earth Ground
Warning: Do not connect to AC line-Natural
+ +
PW1P W2Alm 1@ DC24V
Power Event Alm
LLFPort Event Alm
ON: Enable
！
is is a Class 1 Laser/LED product.
Don't look into the Laser/LED Beam.
ATTENTION
# 1
#2
#3
LLF
DIP Switch Settings for Alarm Relay Output and Link
Loss Forwarding
Port Event Alarm
Power Event Alarm
(Link Loss Forwarding)
Pin No. # Status
ON
ON
ON
Description
To disable Link Loss Forwarding function.
To enable port link down alarm at this port.
To disable port link down alarm at this port.
To enable power failure alarm.
To disable power failure alarm.
To enable Link Loss Forwarding function at both of fiber and
copper port. Once either one of copper or fiber port is
disconnected, the JetCon 3401G will turn-off the other port to
alert the end of attached device forcibly.
Note: Once the LLF is active and the cable event is recovered,
the LLF DIP-switch must be re-triggered to arouse this function.
Off
Off
Off
Package Check List
JetCon 3401G
Quick Installation Guide
CD User Manual
JetCon 3401G Industrial Gigabit Ethernet Media Converter
Quick Installation Guide V1.2
e JetCon 3401G Industrial Gigabit Ethernet Converter, conforming IEEE 802.3 10Base-T,
802.3u 100Base-TX and 1000Base-T/SX/LX standard, supports RJ-45 copper to Gigabit ber
conversion using store and forward technology. e JetCon 3401G adopts rugged metal case
design to operate in harsh environments (-25~70
o
C); It also provides IP-31 standard
protection. It features Link Loss Forwarding to raise an alarm when a remote fault occurs and
also adopts one relay output to alarm users if a port link fails or if the power fails. Alarms can
be enabled/ disabled by dip switch. e ber port supports SFP socket for several of SFP
transceiver to achieve dierent link distance.
JetCon 3401G is recommended to be powered by DC 24V with 12~48V range from the
6-pin removable terminal block.
Overview
A Beijer Electronics Group Company
A Beijer Electronics Group Company
Software and Documentation
Industrial Networking & Computing
2
0
1
4
K
o
r
e
n
i
x
T
e
c
h
n
o
l
o
g
y
.
S
u
p
p
o
r
t
f
o
r
i
n
d
u
s
t
r
i
a
l
d
a
t
a
c
o
m
m
u
n
i
c
a
t
i
o
n
p
r
o
d
u
c
t
s
p
r
o
v
i
d
e
d
b
y
k
o
r
e
n
i
x
,
a
B
e
i
j
e
r
E
l
e
c
t
r
o
n
i
c
s
g
r
o
u
p
c
o
m
p
a
n
y
A Beijer Electronics Group Company
Software and Documentation
Industrial Networking & Computing
2
0
1
4
K
o
r
e
n
i
x
T
e
c
h
n
o
l
o
g
y
.
S
u
p
p
o
r
t
f
o
r
i
n
d
u
s
t
r
i
a
l
d
a
t
a
c
o
m
m
u
n
i
c
a
t
i
o
n
p
r
o
d
u
c
t
s
p
r
o
v
i
d
e
d
b
y
k
o
r
e
n
i
x
,
a
B
e
i
j
e
r
E
l
e
c
t
r
o
n
i
c
s
g
r
o
u
p
c
o
m
p
a
n
y
Package Check List
JetCon 3401G
Quick Installation Guide
CD User Manual
JetCon 3401G Industrial Gigabit Ethernet Media Converter
Quick Installation Guide V1.2
e JetCon 3401G Industrial Gigabit Ethernet Converter, conforming IEEE 802.3 10Base-T,
802.3u 100Base-TX and 1000Base-T/SX/LX standard, supports RJ-45 copper to Gigabit ber
conversion using store and forward technology. e JetCon 3401G adopts rugged metal case
design to operate in harsh environments (-25~70oC); It also provides IP-31 standard
protection. It features Link Loss Forwarding to raise an alarm when a remote fault occurs and
also adopts one relay output to alarm users if a port link fails or if the power fails. Alarms can
be enabled/ disabled by dip switch. e ber port supports SFP socket for several of SFP
transceiver to achieve dierent link distance.
JetCon 3401G is recommended to be powered by DC 24V with 12~48V range from the
6-pin removable terminal block.
Overview
A Beijer Electronics Group Company
Package Check List
JetCon 3401G
Quick Installation Guide
CD User Manual
JetCon 3401G Industrial Gigabit Ethernet Media Converter
Quick Installation Guide V1.2
e JetCon 3401G Industrial Gigabit Ethernet Converter, conforming IEEE 802.3 10Base-T,
802.3u 100Base-TX and 1000Base-T/SX/LX standard, supports RJ-45 copper to Gigabit ber
conversion using store and forward technology. e JetCon 3401G adopts rugged metal case
design to operate in harsh environments (-25~70oC); It also provides IP-31 standard
protection. It features Link Loss Forwarding to raise an alarm when a remote fault occurs and
also adopts one relay output to alarm users if a port link fails or if the power fails. Alarms can
be enabled/ disabled by dip switch. e ber port supports SFP socket for several of SFP
transceiver to achieve dierent link distance.
JetCon 3401G is recommended to be powered by DC 24V with 12~48V range from the 6-pin
removable terminal block.
Overview
A Beijer Electronics Group Company
Patent No. (Taiwan):
Granted Invention: I 313547
Granted Invention: I 321415
Granted Invention: I 344766
Granted Invention: I 346480
Granted Invention: I 356616
Granted Invention: I 364684
Granted Invention: I 376118
Granted Invention: I 393317
Granted Invention: I 398066
Granted Invention: I 398125
Granted Invention: I 459757
Utility Model: M 339841
Utility Model: M 339840
启动该端口的断线报警功能
关闭该端口的断线报警功能
启动断电报警功能
关闭断电报警功能
关闭LLF功能
启动光口和电口的LLF功能
一旦关口或电口任一端口断连，JetCon 3401G会强制性关闭另一端
口以通知下连设备线路已经中断。
备注: 当LLF为启动状态而将断开的线路恢复，必须重置LLF DIP拨
码开关唤醒该功能。
# 1
端口报警
电源报警
#2
#3
LLF
(Link Loss Forwarding)
Pin No. # 状态
ON
ON
ON
描述
Off
Off
Off
Korenix
售后服务
KoreCARE 是科洛理思科技全球服务中心，我们专业的技术人员随时准备解答您的
疑问。科洛理思全球服务中心 EMAIL: [email protected]
详细说明及文件请至网站下载: http://www.korenix.com.cn/support_downloads.htm
业务服务: [email protected]
官网: www.korenix.com.cn
客户服务
5
年质保
所有科洛理思产品的设计、制造及测试都是采用较高的工业标准。科洛理思保证自
产品出货日起提供最高5年之免费保修服务，保修期间如因零件损坏或制程不良而
导致产品故障，我们将提供免费维修服务。
然而，自然外力(火、水、雷灾)所造成的产品故障，或其它外部因素如电源干扰、
不当电源输入、不当接线等造成的损坏，不列入产品保固范围；此外，产品被误用
、未经授权的修理及修改等行为将造成保固条款失效。
注意! 请勿于电源开启时插拔接线端子，以避免产生火花造成系统损坏。
此产品保证完全符合欧盟2003年1月27日电气和电子设备危害物质限制委员会所提
出的限用指令2002/95/EC(ROHS禁令)及2011/65/EU(RoHS 2.0)。
Tel:+886-2-89111000
Fax:+886-2-29123328
Business service:[email protected]
Customer service:[email protected]
www.korenix.com
CPQ000V3401002
Korenix Technology Co., Ltd.
(A Beijer Electronics Group Company)
JetCon 3401G工业级千兆以太网信号转换器，符合IEEE 802.3 10Base-T，802.3u
100Base-TX和1000Base-T/SX/LX标准，采用存储转发技术将RJ-45以太网口转成千兆
光口。JetCon 3401G 采用坚固的铝合金外壳设计，支持-25~70
o
C宽温工作环境；并
满足IP-31工业防护标准。它支持LLF（Link Loss Forwarding）技术可检测远端连线故
障，并配备一路继电器报警输出为用户提供断线和断电报警。用户可通过DIP拨码
开关启动/关闭该报警功能。光口是SFP插槽支持多种SFP光纤收发器，支持不同的
传输距离。
建议采用稳定的DC24V电源为JetCon 3401G供电，同时它也支持12~48V供电范围，
电源接口为6-pin可拆卸接线槽。
导言
安装配件
导轨安装: 用螺丝将导轨夹固定在JetCon 3401G机身背面，
然后将导轨夹卡上导轨。
更多导轨安装详情，请参看用户操作手册。
安装
DIP
拨码开关设定继电器报警和LLF功能
产品清单
JetCon 3401G
快速安装向导
用户手册光盘
A Beijer Electronics Group Company
Software and Documentation
Industrial Networking & Computing
2
0
1
4
K
o
r
e
n
i
x
T
e
c
h
n
o
l
o
g
y
.
S
u
p
p
o
r
t
f
o
r
i
n
d
u
s
t
r
i
a
l
d
a
t
a
c
o
m
m
u
n
i
c
a
t
i
o
n
p
r
o
d
u
c
t
s
p
r
o
v
i
d
e
d
b
y
k
o
r
e
n
i
x
,
a
B
e
i
j
e
r
E
l
e
c
t
r
o
n
i
c
s
g
r
o
u
p
c
o
m
p
a
n
y
A Beijer Electronics Group Company
Software and Documentation
Industrial Networking & Computing
2
0
1
4
K
o
r
e
n
i
x
T
e
c
h
n
o
l
o
g
y
.
S
u
p
p
o
r
t
f
o
r
i
n
d
u
s
t
r
i
a
l
d
a
t
a
c
o
m
m
u
n
i
c
a
t
i
o
n
p
r
o
d
u
c
t
s
p
r
o
v
i
d
e
d
b
y
k
o
r
e
n
i
x
,
a
B
e
i
j
e
r
E
l
e
c
t
r
o
n
i
c
s
g
r
o
u
p
c
o
m
p
a
n
y
Package Check List
JetCon 3401G
Quick Installation Guide
CD User Manual
JetCon 3401G Industrial Gigabit Ethernet Media Converter
Quick Installation Guide V1.2
e JetCon 3401G Industrial Gigabit Ethernet Converter, conforming IEEE 802.3 10Base-T,
802.3u 100Base-TX and 1000Base-T/SX/LX standard, supports RJ-45 copper to Gigabit ber
conversion using store and forward technology. e JetCon 3401G adopts rugged metal case
design to operate in harsh environments (-25~70oC); It also provides IP-31 standard
protection. It features Link Loss Forwarding to raise an alarm when a remote fault occurs and
also adopts one relay output to alarm users if a port link fails or if the power fails. Alarms can
be enabled/ disabled by dip switch. e ber port supports SFP socket for several of SFP
transceiver to achieve dierent link distance.
JetCon 3401G is recommended to be powered by DC 24V with 12~48V range from the
6-pin removable terminal block.
Overview
A Beijer Electronics Group Company
Package Check List
JetCon 3401G
Quick Installation Guide
CD User Manual
JetCon 3401G Industrial Gigabit Ethernet Media Converter
Quick Installation Guide V1.2
e JetCon 3401G Industrial Gigabit Ethernet Converter, conforming IEEE 802.3 10Base-T,
802.3u 100Base-TX and 1000Base-T/SX/LX standard, supports RJ-45 copper to Gigabit ber
conversion using store and forward technology. e JetCon 3401G adopts rugged metal case
design to operate in harsh environments (-25~70oC); It also provides IP-31 standard
protection. It features Link Loss Forwarding to raise an alarm when a remote fault occurs and
also adopts one relay output to alarm users if a port link fails or if the power fails. Alarms can
be enabled/ disabled by dip switch. e ber port supports SFP socket for several of SFP
transceiver to achieve dierent link distance.
JetCon 3401G is recommended to be powered by DC 24V with 12~48V range from the 6-pin
removable terminal block.
Overview
A Beijer Electronics Group Company
连接电源
1. 将电源的正负极导线分别插入机身底部
电源接线槽的V+ 和V- 接脚。
2. 将线夹拧紧，防止DC电源线因振动脱
落。参看图-1。
备注: 建议工作电压DC24V (DC12~ 48V)
图-1
连接继电器报警
继电器报警输出连接点是底部接线槽中间的
一对接脚，如图-3所示。连接导线，并将对
应端口的DIP拨码开关置“ON”，继电器报警
功能便可以检测到端口断线或电源断连，然
后形成回路发出报警。正常情况下，继电器
报警线路是开路状态。参看图-2。更多详情
，请参考用户手册chapter 2-4, 2-5。
图-2
Maximum 1A current / DC 24V
Alarm
System
Extra Power
System
+ +
PW1P W2Alm 1@ DC24V
Power Event Alm
LLFPort Event Alm
ON: Enable
连接地线
在工业现场环境中，可能会有大量产生电
磁干扰的设备存在，如交流电动机，电焊
机，发电机等。这些设备产生的电磁干扰
和浪涌干扰均可能干扰到正常通讯。为防
止干扰影响，请将设备正确接地。未进行
设备接地，导致之功能损害，将不列入质
保范围，维修将另行收费。图3提供正确连线示例，请参考。
图-3
Earth Ground
Screw
Earth Ground
Warning: Do not connect to AC line-Natural
+ +
PW1P W2Alm 1@ DC24V
Power Event Alm
LLFPort Event Alm
ON: Enable
网络连接
1. 以太网连接: 将UTP双绞线的一端连接JetCon 3401G以太网口，另一端连接网络设
备。UTP端口支持自适应MDI/MDIX。当为1000M连线时，速率LED指示灯会亮起
，当为100M连线时，指示灯会闪烁；LNK/ACT LED指示灯亮起表示端口已经连线
，信号灯闪烁表示该端口正在收发数据。
2. 安装千兆SFP光纤收发器模块并连线: 按照下图提示，将JetCon 3401G的光口连接
到另一个设备的千兆光口。错误的连线会导致光口无法工作。
SFP光口有2个LED指示灯，分别为link/activity和full duplex/collision；当千兆光口连通
时，Link指示灯会亮起。
！
is is a Class 1 Laser/LED product.
Don't look into the Laser/LED Beam.
ATTENTION
-
1
-
2
Korenix JetCon 3401G Quick Installation Manual
- カテゴリー
- ネットワークメディアコンバータ
- タイプ
- Quick Installation Manual
他の言語で
- English: Korenix JetCon 3401G
関連論文
-
Korenix JetCon 3401G V2 Quick Installation Manual
-
-
-
-
-
-
-
-
-
