TSC TE200 Series ユーザーマニュアル

i

使用手冊

TE200/TE210/TE300/TE310 Series

熱轉式/熱感式條碼印表機

ii

本手冊和手冊中所述之條碼印表機軟體和韌體版權均歸 TSC Auto ID Technology

Co., Ltd 所有。本手冊提供購買設備的操作者參考和使用，未經明確的書面許可，

不得為了其他目的使用、複製。

所有其他品牌名稱、產品名稱或商標，利屬於其他個別擁有者。

因持續產品的改進，故手冊中所述的機種規格、配件、零件、設計及程式內容以實

機為主，如有變更，恕不另行通知。

TSC 盡力確保手冊內容正確無誤，但錯誤在所難免。TSC 保留更正任何這類錯誤的

權利，並聲明不對因此所造成的後果負責。

iii

安規認證

TE200/TE300 Series:

EN 55032, Class A

EN 55024

EN 60950-1

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

TE210/TE310 Series:

EN 55032, Class B

EN 55024

EN 61000-3-2

EN 61000-3-3

EN 60950-1

TE200/TE300 Series:

FCC part 15B, Class A

ICES-003, Class A

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the manufacturer’s

instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case you will be required to correct the

interference at your own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conform à la norme NMB-003

du Canada.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

TE210/TE310 Series:

FCC part 15B, Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

iv

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

TE200/TE300 Series:

AS/NZS CISPR 32, Class A

TE210/TE310 Series:

AS/NZS CISPR 32, Class B

UL 60950-1

CSA C22.2 No. 60950-1-07

EN 60950-1

TE200/TE300 Series:

GB 4943.1

GB 9254, Class A

GB 17625.1

此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰，

在这种情况下，可能需要用户对干扰采取切实可行的措施。

TE210/TE310 Series:

GB 4943.1

GB 9254, Class B

GB 17625.1

Energy Star for Imaging Equipment Version 2.0

TP TC 004

TP TC 020

IS 13252(Part 1)/

IEC 60950-1

v

KN 32

KN 35

Note: There may have certification differences in the series models, please refer to product label for accuracy.

Important safety instructions:

1. Read all of these instructions and keep them for later use.

2. Follow all warnings and instructions on the product.

3. Disconnect the power plug from the AC outlet before cleaning or if fault happened.

Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.

4. The mains socket shall be installed near the equipment and easily accessible.

5. The unit must be protected against moisture.

6. Ensure the stability when installing the device, Tipping or dropping could cause damage.

7. Make sure to follow the correct power rating and power type indicated on marking label

provided by manufacture.

8. Please refer to user manual for maximum operation ambient temperature.

重要安全說明：

1. 閱讀所有這些說明，並保留以備未來使用。

2. 按照產品上的所有警告和說明進行操作。

3. 在清潔前或發生故障時，拔除電源插頭與交流電源插座的連接。

不要使用液體或噴霧清潔劑。建議使用濕布清潔。

4. 電源插座應安裝在設備附近及方便使用處。

5. 本機器必須防止潮濕。

6. 確保安裝設備時的穩定性，翻倒或跌落可能會導致設備損壞。

7. 確保按照製造商提供的標籤上標明之正確的額定功率和電源類型進行設定。

8. 請參考使用手冊以確認環境溫度的最大值。

WARNING:

Hazardous moving parts, keep fingers and other body parts away.

CAUTION:

(For equipment with RTC (CR2032) battery or rechargeable battery pack)

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the Instructions as below.

1. DO NOT throw the battery in fire.

2. DO NOT short circuit the contacts.

3. DO NOT disassemble the battery.

4. DO NOT throw the battery in municipal waste.

5. The symbol of the crossed out wheeled bin indicates that the battery should not be

placed in municipal waste.

vi

警告：

（對於帶有 RTC（CR2032）電池或可充電電池組的設備）

如果更換不正確的電池類型，會有爆炸的危險。

請按照以下說明處理廢電池：

1. 請勿將電池投入火中。

2. 請勿使觸點短路。

3. 請勿拆卸電池。

4. 請勿將電池丟入都市廢棄物。

5. 垃圾桶畫叉圖案表示電池不應放置在都市廢棄物中。

Caution: The printhead may be hot and could cause severe burns. Allow the

printhead to cool.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device

could void the user's authority to operate the equipment.

CE Statement:

This equipment complies with EU radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20 cm between the radiator & your body.

All operational modes:

2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)

5GHz: 802.11a,

The frequency, mode and the maximum transmitted power in EU are listed below:

2400 MHz – 2483.5 MHz: 19.88 dBm (EIRP)

5150 MHz – 5250 MHz: 17.51 dBm (EIRP)

5150-5350MHz for Only indoor use

5470-5725MHz for indoor/outdoor use

Restrictions In AZE

National restrictions information is provided below

Frequency Band Country Remark

5150-5350MHz

Azerbaijan

No license needed if used indoor and

power not exceeding 30mW

5470-5725MHz

vii

Hereby, TSC Auto ID Technology Co., Ltd. declares that the radio equipment type

[Wi-Fi] IEEE 802.11 a/b/g/n is in compliance with Directive 2014/53/EU

The full text of the EU declaration of conformity is available at the following internet

address: http:// www.tscprinters.com

RF exposure warning (Wi-Fi)

This equipment must be installed and operated in accordance with provided

instructions and must not be co-located or operating in conjunction with any other

antenna or transmitter. End-users and installers must be providing with antenna

installation instructions and transmitter operating conditions for satisfying RF

exposure compliance.

SAR Value: 0.736 W/kg

RF exposure warning (For Bluetooth)

The equipment complies with FCC RF exposure limits set forth for an uncontrolled

environment.

The equipment must not be co-located or operating in conjunction with any other

antenna or transmitter.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC)

radio frequency exposure limits. The Wireless Device should be used in such a

manner such that the potential for human contact during normal operation is

minimized.

This device has been evaluated for and shown compliant with the IC Specific

Absorption Rate (“SAR”) limits when installed in specific host products operated in

portable exposure conditions. (For Wi-Fi)

This device has also been evaluated and shown compliant with the IC RF Exposure

limits under portable exposure conditions. (Antennas are less than 20 cm of a

person's body). (For Bluetooth)

viii

Canada, avis de l'Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003

et RSS-210.

Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne

doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence,

notamment les interférences qui peuvent affecter son fonctionnement.

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par l’appareil sans fil est inférieure à la limite

d'exposition aux fréquences radio de l'Industry Canada (IC). Utilisez l’appareil sans fil

de façon à minimiser les contacts humains lors du fonctionnement normal.

Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific

Absorption Rate – Taux d'absorption spécifique) par l'IC lorsqu'il est connecté à des

dispositifs hôtes spécifiques opérant dans des conditions d’utilisation mobile. (Pour le

Wi-Fi)

Ce périphérique a également été évalué et démontré conforme aux limites

d'exposition radio-fréquence par l'IC pour des utilisations par des opérateurs mobiles

(les antennes sont à moins de 20 cm du corps d'une personne). (Pour le Bluetooth)

NCC

警語

:

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻

率、加大功率或變更原設計之特性及功能。(即低功率電波輻射性電機管理辦法第十二

條)

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立

即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或

工業、科學及醫療用電波輻射性電機設備之干擾。(即低功率電波輻射性電機管理辦法

第十四條)

BSMI Class A

警語

:

這是甲類的資訊產品，在居住的環境使用中時，可能會造成射頻干擾，在這種情況下，

使用者會被要求採取某些適當的對策。

ix

Model Name Resolution Print Speed

TE200 series

203 dpi Up to 6 IPS

TE300 series

300 dpi Up to 5 IPS

x

設備名稱

Equipment name

：熱轉式

/

熱感式條碼印表機，

型號（型式） Type designation (Type)： TE200 系列

單元Ｕnit

限用物質及其化學符號

鉛Lead

(Pb)

汞Mercury

(Hg)

鎘Cadmium

(Cd)

六價鉻

Hexavalent

chromium

(Cr

+6

)

多溴聯苯

Polybrominated

biphenyls

(PBB)

多溴二苯醚

Polybrominated

diphenyl ethers

(PBDE)

內外塑膠件 ○ ○ ○ ○ ○ ○

內外鐵件 ○ ○ ○ ○ ○ ○

滾輪 ○ ○ ○ ○ ○ ○

電路板組件

-

○ ○ ○ ○ ○

晶片電阻

-

○ ○ ○ ○ ○

積層陶瓷表面

黏著電容

○ ○ ○ ○ ○ ○

集成電路-IC

○ ○ ○ ○ ○ ○

電源供應器 ○ ○ ○ ○ ○ ○

印字頭 ○ ○ ○ ○ ○ ○

馬達

-

○ ○ ○ ○ ○

插座 ○ ○ ○ ○ ○ ○

線材 ○ ○ ○ ○ ○ ○

備考1.〝超出0.1 wt %〞及〝超出0.01 wt %

〞係指限用物質之百分比含量超出百分比含量基準值。

備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

備考3.〝－〞係指該項限用物質為排除項目。

Restricted substances and its chemical symbols

Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the

reference percentage value of presence condition.

Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of

presence.

Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

xi

For MFi Bluetooth

Use of the Made for Apple badge means that an accessory has been designed to connect

specifically to the Apple product(s) identified in the badge, and has been certified by the

developer to meet Apple performance standards. Apple is not responsible for the operation of

this device or its compliance with safety and regulatory standards.

For US Model

Made for iPhone®XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus,

iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus,

iPhone 5s, iPad Pro® 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad® (6th generation),

iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air® 2,

iPad mini™ 4, iPad mini 3, iPad Air, iPad mini 2, iPod touch® (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries.

For JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus,

iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus,

iPhone 5s, iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation),

iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2,

iPad mini 4, iPad mini 3, iPad Air, iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

Except for US, JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus,

iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus,

iPhone 5s, iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation),

iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2,

iPad mini 4, iPad mini 3, iPad Air, iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries.

xii

1.

印表機簡介

............................................................................................................1

1.1

介紹

.................................................................................................................... 1

1.2

產品特色

............................................................................................................. 2

1.2.1

標準配備

.................................................................................................. 2

1.2.2

選購配件

.................................................................................................. 3

1.2.3

標籤列印模組規格

(

選購

) ........................................................................... 4

1.3

一般規格

............................................................................................................. 5

1.4

列印規格

............................................................................................................. 5

1.5

碳帶規格

............................................................................................................. 5

1.6

紙張規格

............................................................................................................. 6

2.

產品介紹

................................................................................................................7

2.1

拆封與檢查

......................................................................................................... 7

2.2

印表機組件

......................................................................................................... 8

2.2.1

外觀

......................................................................................................... 8

2.2.2

內部

......................................................................................................... 9

2.2.3

後部

....................................................................................................... 10

3.

安裝

..................................................................................................................... 11

3.1

安裝印表機

....................................................................................................... 11

3.2

安裝碳帶

........................................................................................................... 12

3.3

安裝紙張

............................................................................................................ 15

3.3.1

安裝紙張

................................................................................................ 15

3.3.2

外部進紙模式裝紙

/

外部紙卷架

(

選配

) ...................................................... 18

3.3.3

裁刀模式裝紙

(

僅限

TE210/TE310

系列，經銷商選配

) ............................ 20

3.3.4

剝紙模式裝紙

(

僅限

TE210/TE310

系列，經銷商選配

) ............................ 22

4. LED

指示燈及按鍵功能

........................................................................................ 24

4.1 LED

指示燈

....................................................................................................... 24

4.2

一般按鍵功能

.................................................................................................... 24

4.3

開機功能

........................................................................................................... 25

4.3.1

間隙

/

黑標感應器偵測

............................................................................... 25

4.3.2

間隙

/

黑標感應器偵測；列印自測值並進入除錯模式

................................. 26

4.3.3

印表機初始化

.......................................................................................... 29

4.3.4

選用並校正黑標感應器

............................................................................ 30

4.3.5

選用校正間隙感應器

............................................................................... 30

4.3.6

跳過

AUTO.BAS

程式

............................................................................ 31

xiii

5.

印表機診斷工具

(Diagnostic Tool) ...................................................................... 32

5.1

啟用

Diagnostic Tool

工具程式

........................................................................ 32

5.2

印表機設定

........................................................................................................ 33

5.3

用印表機診斷工具校正紙張感應器

.................................................................... 34

5.4

用印表機診斷工具設定

Wi-Fi

設備

(

選配

) ............................................................ 35

5.5

用印表機診斷工具設定藍牙設備

(

選配

) ............................................................... 36

6.

故障排除

.............................................................................................................. 37

6.1

常見問題

........................................................................................................... 37

7.

印表機簡易保養

................................................................................................... 39

更新記錄

.................................................................................................................. 41

1

1.

印表機簡介

1.1

介紹

感謝您購買本公司出品的標籤印表機。

此 TE200/TE210/TE300/TE310 系列機種配有 1 組齒輪驅動馬達可處理 300 米的碳帶和搭配使用

大容量的標籤紙張設計，如果內部的紙張 5” OD(外徑)容量還無法滿足，只需選購外部紙卷架後，

此機種可支援達工業級標準的 8” OD(外徑)紙張容量。

可移動式黑標感應器能支援廣泛的紙張類型，可使用多種印刷材質，包括紙卷、紙切片及摺頁的

標籤。除此之外，其他常用的條碼紙均可使用。

為滿足不同列印需求，TE200/TE300 與 TE210/TE310 系列分別提供不同的記憶體容量，

TE210/TE310 系列更提供選配件(剝紙及裁刀模組)供使用者選購。

本機型內建高品質高效率的 MONOTYPE IMAGING

®

仿真字型(True Type font) 引擎和 CG

Triumvirate Bold Condensed 平滑字型。搭配靈活的韌體設計, 使用者也可以自行從電腦下載True

Type Font 字型到印表機的記憶體中。除了可以縮放字體外，還提供了八種不同尺寸的字母數字

圖(bitmap font)。整合了如此強大的功能, 經濟實惠的價格, 最優良的列印品質, 此印表機將會是

您於同級熱感、熱轉型印表機中的最佳選擇。

於列印標籤格式時，請參閱您的標籤編輯軟體所提供的資訊，如果您需要自行編寫指令程式，請

參閱 TSPL/TSPL2 指令手冊，您可於 TSC 網站 http://www.tscprinters.com 上取得此指令手冊。

• 適用範圍

o 製造業&倉儲物流業

 製造標示標籤

 庫存管理標籤

 品項標示標籤

 操作指示標籤

 經銷指示標籤

o 醫療業

 病患識別

 藥品標示

 標本標籤

o 包裹郵遞

 寄送/接收標籤

o 小型辦公室/工作室

o 零售業

 價格標示

 貨架品項標示

 珠寶產品標籤

2

1.2

產品特色

1.2.1

標準配備

產品標準配備

TE200

(203 dpi

model)

TE300

(300 dpi

model)

TE210

(203 dpi

model)

TE310

(300 dpi

model)

熱轉式列印

○ ○ ○ ○

熱感式列印

○ ○ ○ ○

塑膠機殼

○ ○ ○ ○

間隙感應器 ○ ○ ○ ○

反射式、全區可移動式黑標感應器 ○ ○ ○ ○

碳帶感應器 ○ ○ ○ ○

印字頭開啟感應器

○ ○ ○ ○

USB 2.0 (Hi-Speed)通訊介面

○ ○ ○ ○

16 MB DRAM 記憶體

○ ○

- -

64 MB DRAM 記憶體

- -

○ ○

8 MB Flash 記憶體 ○ ○

- -

128 MB Flash 記憶體

- -

○ ○

SD card reader (Reserve a PIN connector for updating

firmware by card when doing maintenance.)

- - - -

實時時鐘

- -

○ ○

蜂鳴器

- -

○ ○

一個進紙/暫停鍵 ○ ○ ○ ○

一個三色 LED 指示燈 ○ ○ ○ ○

可支援模擬其它品牌（Eltron

®

與 Zebra

®

）條碼機之程式語言 ○ ○ ○ ○

內建 8 種點陣英數字型

○ ○ ○ ○

字型和條碼可以朝四個方向旋轉印出(0, 90,180, 270 度)

○ ○ ○ ○

內建

Monotype True Type Font engine

字型及

1

套

CG

Triumvirate Bold Condensed

向量字型

○ ○ ○ ○

可下載 Windows 字型使用 ○ ○ ○ ○

可下載韌體更新

○

可列印文字

,

條碼

,

影像

/

圖片

(

支援

code page

的請參閱

TSPL/TSPL2 指令手冊)

支援條碼

支援影像格式

1D bar code

2D bar code

BITMAP,

BMP,

PCX

(Max. 256 colors

graphics)

Code128UCC,

Code128 subsets

A、B、C, EAN128,

Interleaved 2 of

5, Interleaved 2

of 5 with check

digit, Code39,

GS1 DataBar,

GS1

DataMatrix,

Maxicode,

AZTEC, PDF417,

QR Code, Micro

PDF 417

○ ○ ○ ○

3

Code39 with

check digit,

Code93, EAN13,

EAN8, UPCA,

UPCE, EAN and

UPC 2 (5) digits

add-

on, Codabar,

Postnet, MSI, MSI

with check digit,

PLESSEY, China

post, ITF14,

Code11,

TELEPEN,

TELEPENN,

PLANET, Code49,

Deutsche Post

Identcode,

Deutsche Post

Leitcode,

LOGMARS

1.2.2

選購配件

產品選購配件

客戶選配

經銷商選配

工廠選配

外部紙卷架(附 3 吋紙卷軸) (8.4 OD) ○

- -

內建藍牙 v4.0 模組

- -

○

下方配件僅供 TE210/TE310 系列使用：

KP-200 Plus外接鍵盤(適用於附RS-232介面機

種)

○

- -

外接藍牙模組(適用於附 RS-232 介面機種) ○

-

標籤剝紙模組

-

○

裁刀模組(一般切刀/閘刀式)

紙張厚度：0.06~0.19 mm

適用紙張：收據紙及不含背膠之標籤紙

-

○

-

裁刀模組(一般切刀/全切或半切)

紙張厚度：0.06~0.19 mm

適用紙張：收據紙及不含背膠之標籤紙

-

○

-

內建 Wi-Fi 模組

○

備註：

1.

內建

Wi-Fi

模組與內建藍牙模組只能擇一安裝

2.

除了不沾膠切刀外

,

所有

TSC

切刀組皆不可切於含背膠的標籤上

4

1.2.3

標籤列印模組規格

(

選購

)

產品選購配件

標籤列印模組

印字頭解析

(dots per inch/mm)

8 dots/mm (203 dpi) 12 dots/mm (300 dpi)

最大列印速度

152.4 mm (6”)/second 127 mm (5”)/second

最大列印寬度

108 mm (4.25”) 105.7 mm (4.16”)

印表機體積尺寸

196.0 mm (W) x 161.0 mm (L) x 145.0 mm (H)

(7.72” (W) x 6.34” (L) x 5.71” (H))

重量

1.43 kg (3.15 lbs)

規格

記憶體

128 MB Flash 記憶體, 64 MB SDRAM

介面

USB2.0, RS-232, Internal Ethernet 10/100 Mbps, USB host

實時時鐘

(Real time clock)

選配

蜂鳴器

標配

電源供應

輸入

AC 100-240V, 2.5A, 50-60Hz

輸出

DC 24V, 2.5A, 60W

支援紙張類型

紙張類型

連續紙、間隙紙、黑標紙、摺疊紙、穿孔紙

紙張纏繞型式列印面外捲式

紙張寬度

(標籤+底紙)

20 ~ 112 mm (0.8” ~ 4.4”)

最小標籤長度

5 mm (0.2”)

標籤厚度

0.06mm ~ 0.19 mm (2.36 ~ 7.48 mil)

支援碳帶類型

碳帶類型蠟基、樹脂及半蠟半樹脂

碳帶纏繞型式外捲式

碳帶寬度

40 ~ 110 mm (1.6” ~ 4.3”)

碳帶容量

最長可達 300 公尺, 最大外徑 67 mm, 1” 軸心 (外捲式碳帶)

最長可達 110 公尺, 最大外徑 40 mm, 0.5”軸心 (外捲式碳帶)

配件

標配

 1” 紙捲軸心、固定片 x 2、1.5”適配器 x 2

 1” 碳帶軸心 x 2，可供 300 公尺長碳帶使用

 1 吋碳帶軸心

選配

 剝紙模組

 裁刀模組(全切/ 半切)

 外部紙捲架(紙張外徑 214 mm (8.4”)、附 76.2 mm (3”) 軸心)

5

1.3

一般規格

TE200/TE300 TE210/TE310

印表機體積尺寸

204 mm (W) x 164 mm (H) x 280 mm (D)

印表機重量

2.4kg 2.5kg

電源

外接式電壓自動切換電源供應器

Input: AC 100-240V, 2A, 50-60 Hz

Output: DC 24V, 2.5A, 60W, LPS

環境條件操作環境： 5 ~ 40˚C (41 ~ 104˚F), 25~85% non-condensing

儲存環境： -40 ~ 60 ˚C (-40 ~ 140˚F), 10~90% non-condensing

1.4

列印規格

TE200

(203 dpi model)

TE300

(300 dpi model)

TE210

(203 dpi model)

TE310

(300 dpi model)

印字頭解析

度

203 dots/inch

(8 dots/mm)

300 dots/inch

(12 dots/mm)

203 dots/inch

(8 dots/mm)

300 dots/inch

(12 dots/mm)

列印模式熱轉式/熱感式

Dot size

(點的尺寸)

(寬 x 長)

0.125 x 0.125 mm

(1 mm = 8 dots)

0.084 x 0.084 mm

(1 mm = 11.8 dots)

0.125 x 0.125 mm

(1 mm = 8 dots)

0.084 x 0.084 mm

(1 mm = 11.8 dots)

列印速度

(英吋/每秒)

Up to 6 ips Up to 5 ips Up to 6 ips Up to 5 ips

剝紙模式

列印速度

N/A Up to 3 ips

最大列印寬

108 mm (4.25”) 105.7 mm (4.16”) 108 mm (4.25”) 105.7 mm (4.16”)

最大列印長

2,794 mm (110”) 1,016 mm (40”) 25,400 mm (1000") 11,430 mm (450")

1.5

碳帶規格

碳帶外徑 1 吋軸心：最大 67 mm

0.5 吋軸心：最大 40 mm

碳帶長度 1 吋軸心：300 m

0.5 吋軸心：110 m

碳帶軸心尺寸 0.5 吋和 1 吋

碳帶寬度

40 ~ 110 mm

碳帶纏繞型式列印面外捲式

6

1.6

紙張規格

TE200

(203 dpi model)

TE300

(300 dpi model)

TE210

(203 dpi model)

TE310

(300 dpi model)

內部紙卷最大容量外徑

Max. 5” OD

紙張類型連續紙, 間隙紙, 黑標紙, 摺疊紙, 穿孔紙

紙張纏繞型式列印面外捲式

紙張寬度

20mm ~ 112 mm

紙張厚度最大 0.19 mm (7.48 mil)

最小 0.06 mm (2.36 mil)

紙卷軸心尺寸

25.4 mm & 38 mm (1

”

& 1.5

”

)

標籤長度 5 mm~最大列印長度

標籤長度(剝紙模式)

N/A 1" ~ 6" (25.4 ~ 152.4 mm)

標籤長度(裁刀模式)

N/A

1" ~ 最大列印長度

間隙紙間距高度最小 2 mm (0.09”)

黑標紙黑標高度最小 2 mm (0.09”)

黑標紙黑標寬度最小 8 mm (0.31”)

ページが読み込まれています...

TSC TE200 Series ユーザーマニュアル

TSC TE200 Series ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント