– 18 –
5.3 Function Selection
1. After connecting to the electricity, a “Di” sound will be heard. The display will show “0.0” representing
the appliance is in the standby mode.
2. In the standby mode, Press Function/Cancel key to select desired function where Bird’s nest
() -> Baby congee ( ) -> Double-boiled soup ( ) -> Optional ( ) -> Chinese Dessert
() -> Keep Warm ( ) -> Standby mode “0.0” will show in order. Function indicators will light
up accordingly while default operation time will show on the display. After selected, wait for about
6 seconds to confirm the relevant settings, the display will show the operation time and “ . “ keeps
flashing. When the preset temperature is reached during the heating process, the operation time
will start to count down.
3. When the operation time is flashing (within about 6 seconds), Press the [Preset/Timer] key to adjust
the operation time. While button is pressed every time, time value will be increased (If the preset
operating time of the function is 1.2 or 1.3, the time will first reach 1.5, and then increase by 0.5),
until the function adjusts to the maximum time value, and then return to minimum time value, and
sequential cycles. Detailed information can be found in “Chapter 4.2 Product Structure: Operation
Time Table”. After completion, wait for about 6 seconds to confirm the relevant settings.
4. When the operation completed, “Di Di Di” sounds will be emitted 3 times to remind user. “–.–” will
show on display, “.” keeps flashing, and keep warm indicator will light up. The appliance will switch
to keep warm mode automatically.
5. If no keep warm function is needed, press the Function/Cancel key to cancel during warm keeping.
“0.0”will show on display and the appliance will return to the standby mode.
6. During the operation, the user can press Function/Cancel key to cancel at any time, and the
appliance will return to the standby mode.
CAUTION! Suggested to wait for about 5 minutes before opening the lid and taking out the food, as it
can avoid burns by water spilling.
CAUTION! The appliance will automatically stop operation if water inside the water tank evaporated
during operation or warm keeping. The appliance will emit “Di Di Di”sounds 4 times and “E3” will show
on display at the time when the operation suspended. The user must wait for the appliance to fully cool
down until the temperature drops below protection value, and then reconnect the power supply before
continuing to use the appliance.
5.4 Preset function (The time to start the operation)
Follow the procedures described in“Charter 5.2 Preparation”, place the ingredients and clean water into
the glass/ceramic mug, and follow the steps below to preset the cooking function.
CAUTION! Perishable foods are not recommended for long preset time as to avoid deterioration.
1. In the standby mode, press the Preset/Timer key, the preset indicator will light up and the preset
time “2.0” will flash on the display. If there is no operation within 6 seconds, the appliance will return
to the standby mode.
During the flashing of the preset time (within about 6 seconds). Press the [Preset/Timer] key again
to adjust the preset time.
2. After preset time is set, press the Function/Cancel key to select desired function. If there is no
operation within 6 seconds, the appliance will return to the standby mode.
3. After function is selected, press the Preset/Timer key to adjust the function cooking operation
time or wait for about 6 seconds to confirm the preset function time. The corresponding preset
and timer indicators will light up, the preset function setting completed. The display will show the
operation time and “ . “ keeps flashing.
CAUTION! After completing the preset function setting, the function and time cannot be adjusted.