TSC MH241 Series ユーザーマニュアル

1

使用者手冊

MH241/MH341/MH641/

MH241T/MH341T/MH641T/

MH241P/MH341P/MH641P

系列

熱轉式 / 熱感式條碼印表機

- 1 -

本手冊和手冊中所述之條碼印表機軟體和韌體版權均歸 TSC Auto ID Technology Co., Ltd 所有。

本手冊提供購買設備的操作者參考和使用，未經明確的書面許可，不得為了其他目的使用、複製。

所有其他品牌名稱、產品名稱或商標，隸屬於其他個別擁有者。

因持續產品的改進，故手冊中所述的機種規格、配件、零件、設計及程式內容以實機為主，如有變

更，恕不另行通知。

TSC 盡力確保手冊內容正確無誤，但錯誤在所難免。TSC 保留更正任何這類錯誤的權利，並聲明

不對因此所造成的後果負責。

- 2 -

安規認證

EN 55032: Class A

EN 55024

EN 60950-1

EN 62368

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

FCC part 15B, Class A

ICES-003, Class A

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment.

Operation is subject to the following two conditions: (1) This device may cause

harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may

cause harmful interference with radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which

case you will be required to correct the interference at your own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conform à la norme NMB-003 du Canada.

AS/NZS CISPR 32, Class A

UL 60950-1 (2nd Edition)

CSA C22.2 No. 60950-1-07 (2nd Edition)

UL 62368-1, 2nd Edition, 2014-12-01 (Audio/video, Information and

Communication Technology Equipment - Part 1: Safety Requirements) CAN/CSA

C22.2 No. 62368-1-14, 2nd Edition, 2014-12 (Audio/video, Information and

Communication Technology Equipment - Part 1: Safety Requirements)

EN 62368-1:2014/A11:2017

- 3 -

KN 32

KN 35

K60950-1(2011-12)

이 기기는 업무용(A 급) 전자파적합기기로서 판매자 또는 사용자는 이 점을

주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.

GB 4943.1

GB/T9254, Class A

GB 17625.1

此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰，

在这种情况下，可能需要用户对干扰采取切实可行的措施。

Energy Star for Imaging Equipment Version 3.0

IS 13252(Part 1)/

IEC 60950-1

Note: There may have certification differences in the series models, please refer to product label for

accuracy.

Important safety instructions:

1. Read all of these instructions and keep them for later use.

2. Follow all warnings and instructions on the product.

3. Disconnect the power from the AC inlet before cleaning or if fault happened.

Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.

4. The mains socket shall be installed near the equipment and easily accessible.

5. The unit must be protected against moisture.

6. Ensure the stability when installing the device, Tipping or dropping could cause damage.

7. Make sure to follow the correct power rating and power type indicated on marking label

provided by manufacture.

8. Please refer to user manual for maximum operation ambient temperature.

provided by manufacture.

WARNING:

Moving parts. Keep finger or body away from moving parts.

CAUTION:

(For equipment with RTC (CR2032) battery or rechargeable battery pack)

- 4 -

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the Instructions as below.

1. DO NOT throw the battery in fire.

2. DO NOT short circuit the contacts.

3. DO NOT disassemble the battery.

4. DO NOT throw the battery in municipal waste.

5. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in

municipal waste.

Caution: Hot surface for printhead.

Do not touch the printhead before it cooling.

WARNING:

Remove the power from AC inlet before opening the media cover for cleaning or repairing faults. After

cleaning or fixing faults, media cover closing before power connecting to AC inlet.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

CE Statement:

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20 cm between the radiator &

your body.

All operational modes:

2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)

5GHz: 802.11a,

The frequency, mode and the maximum transmitted power in EU are listed below:

2400 MHz – 2483.5 MHz: 19.88 dBm (EIRP)

5150 MHz – 5250 MHz: 17.51 dBm (EIRP)

5150-5350MHz for Only indoor use

5470-5725MHz for indoor/outdoor use

Restrictions In AZE

- 5 -

National restrictions information is provided below

Frequency Band

Country

Remark

5150-5350MHz

Azerbaijan

No license needed if used indoor and

power not exceeding 30mW

5470-5725MHz

Hereby, TSC Auto ID Technology Co., Ltd. declares that the radio equipment type [Wi-Fi] IEEE 802.11

a/b/g/n is in compliance with Directive 2014/53/EU

The full text of the EU declaration of conformity is available at the following internet address: http://

www.tscprinters.com

RF exposure warning (Wi-Fi)

This equipment must be installed and operated in accordance with provided instructions and must not

be co-located or operating in conjunction with any other antenna or transmitter. End-users and

installers must be providing with antenna installation instructions and transmitter operating conditions

for satisfying RF exposure compliance.

SAR Value: 0.736 W/kg

RF exposure warning (For Bluetooth)

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.

The equipment must not be co-located or operating in conjunction with any other antenna or

transmitter.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)

this device must accept any interference, including interference that may cause undesired operation of

the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency

exposure limits. The Wireless Device should be used in such a manner such that the potential for

human contact during normal operation is minimized.

This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”)

limits when installed in specific host products operated in portable exposure conditions. (For Wi-Fi)

This device has also been evaluated and shown compliant with the IC RF Exposure limits under

portable exposure conditions. (Antennas are less than 20 cm of a person's body). (For Bluetooth)

Canada, avis de l'Industry Canada (IC)

- 6 -

Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.

Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer

d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui

peuvent affecter son fonctionnement.

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par l’appareil sans fil est inférieure à la limite d'exposition aux

fréquences radio de l'Industry Canada (IC). Utilisez l’appareil sans fil de façon à minimiser les contacts

humains lors du fonctionnement normal.

Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption Rate – Taux

d'absorption spécifique) par l'IC lorsqu'il est connecté à des dispositifs hôtes spécifiques opérant dans

des conditions d’utilisation mobile. (Pour le Wi-Fi)

Ce périphérique a également été évalué et démontré conforme aux limites d'exposition radio-

fréquence par l'IC pour des utilisations par des opérateurs mobiles (les antennes sont à moins de 20

cm du corps d'une personne). (Pour le Bluetooth)

NCC 警語:

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或

變更原設計之特性及功能。(即低功率電波輻射性電機管理辦法第十二條)

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善

至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫

療用電波輻射性電機設備之干擾。(即低功率電波輻射性電機管理辦法第十四條)

For MFi Bluetooth

Use of the Made for Apple badge means that an accessory has been designed to connect specifically

to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple

performance standards. Apple is not responsible for the operation of this device or its compliance with

safety and regulatory standards.

For US Model

Made for iPhone® XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,

iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro® 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad® (6th generation),

iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air® 2,

iPad mini™ 4, iPad mini 3, iPad Air, iPad mini 2, iPod touch® (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries.

- 7 -

For JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,

iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation), iPad (5th generation),

iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,

iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

Except for US, JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,

iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation), iPad (5th generation),

iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,

iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries.

- 8 -

1. 印表機簡介 ................................................................................................................ 10

1.1 介紹 ...................................................................................................................... 10

1.2 產品特色 ............................................................................................................... 11

2. 產品介紹 .................................................................................................................... 14

2.1 拆封與檢查 ........................................................................................................... 14

2.2 印表機組件 ........................................................................................................... 15

2.2.1 外觀 ................................................................................................................................... 15

2.2.2 內部 ................................................................................................................................... 18

2.2.3 後部 ................................................................................................................................... 20

2.3 控制面板.............................................................................................................. 23

2.3.1 LED 輔助警示燈和操作按鍵 .............................................................................................. 24

2.3.2 主畫面圖示功能 ................................................................................................................. 24

3. 安裝 ........................................................................................................................... 26

3.1 安裝印表機 .......................................................................................................... 26

3.2 安裝碳帶.............................................................................................................. 27

3.3 移除碳帶 .............................................................................................................. 30

3.4 安裝標籤 .............................................................................................................. 31

3.4.1 安裝標籤 ............................................................................................................................ 31

3.4.2 安裝摺疊式標籤(外部進紙) ................................................................................................ 34

3.4.3 剝紙模式裝紙(選配，僅限 MH241P 系列) ......................................................................... 35

3.4.4 整捲回收模式裝紙(選配，僅限 MH241P 系列) .................................................................. 37

4. 調整鈕 ....................................................................................................................... 40

4.1 印字頭壓力調整鈕 & 印字頭壓力位置調整鈕 ..................................................... 40

4.2 碳帶張力調整旋鈕 ................................................................................................ 41

4.3 皺摺解說及排除 .................................................................................................. 42

5. TSC Console................................................................................................................ 44

- 9 -

5.1 啟動 TSC Console .................................................................................................. 44

5.2 設定 Wi-Fi 並新增至 TSC Console 介面 ............................................................. 46

5.3 TPH CARE .......................................................................................................... 48

5.4 印表機功能 .......................................................................................................... 49

6.印表機選單功能說明 .................................................................................................. 50

6.1 進入選單 (以 240T 為範例) ................................................................................. 50

6.2 選單簡介 .............................................................................................................. 51

6.3 Setting ................................................................................................................. 52

6.3.1 TSPL ................................................................................................................................. 52

6.3.2 ZPL2 ................................................................................................................................. 55

6.4 Sensor(感應器設定) ............................................................................................ 58

6.5 Interface(介面) ................................................................................................... 59

6.5.1 Serial Comm. (串列埠設定) .............................................................................................. 59

6.5.2 Ethernet(乙太網路設定) ................................................................................................... 60

6.5.3 Wi-Fi(無線網路) ................................................................................................................. 61

6.5.4 Bluetooth(藍牙) ................................................................................................................ 62

6.5.5 GPIO ................................................................................................................................. 62

6.6 Advanced ............................................................................................................ 63

6.7 File Manager(檔案管理) ..................................................................................... 65

6.8 Diagnostic(印表機診斷) ..................................................................................... 66

6.9 Favorites(我的最愛) ........................................................................................... 68

7.故障排除 ..................................................................................................................... 69

8. 印表機簡易保養 ........................................................................................................ 72

更新記錄 ........................................................................................................................ 73

- 10 -

1. 印表機簡介

1.1 介紹

感謝您對本公司所出品的條碼印表機的支持。

此 MH241 系列工業型條碼標籤列印機具備紮實堅固之機身設計，可滿足企業大量標籤列印之任

務。內含高速處理器，可大幅提升列印效能，尤其適用於製造業、物流運輸業與產品標籤列印之應

用。此高階工業型條碼標籤列印機可滿足企業用戶 24 小時連續大量標籤列印之需求，金屬鑄造列

印機構模組搭配強固之機身，耐用度高且穩定性佳。

本系列機種包含 MH241、MH241T 及 MH241P 三種系列，共有九種機型，其中 203 dpi 系列最高

列印速度達每秒 14 英吋、300 dpi 系列最高列印速度達每秒 12 英吋，以及 600 dpi 系列最高列印

速度可達每秒 6 英吋，並可應用於二維條碼、圖示、小字或其他超高解析列印需求之圖形標籤。

標配包含彩色觸控面板(MH241T 與 MH241P 系列)與六個操作按鈕、碳帶最大容量可達 600 公尺、

標籤耗材最大外徑八英吋(20.32 公分)、內建式乙太網路伺服器、兩個 USB 主控端介面、USB

2.0、串列埠、可選配之並列埠通訊介面、GPIO 介面及內建藍牙模組。

字型和條碼可以朝四個方向印出，本機型有內建高品質高效率的 MONOTYPE IMAGING

®

仿真字型

(True Type Font)引擎和 CG Triumvirate Bold Condensed 平滑字型。搭配靈活的韌體設計, 使用者

也可以自行從電腦下載 True Type Font 字型到印表機的記憶體中。除了可以縮放字體外，還提供了

五種不同尺寸的字母數字圖(bitmap font)。

本文件提供了此機種的操作說明，於列印標籤格式時，請參閱您的標籤編輯軟體所提供的資訊，如

果你需要自行編寫指令程式，請參閱 TSPL/TSPL2 指令手冊，您可於 TSC 網站

http://www.tscprinters.com 上下載此指令手冊。

− 適用範圍

 工廠大量標籤列印

 物流標示管理

 製造標示

 資產標示管理

 產品規範標籤

 醫療用標籤

 產品規範標籤

 水洗標

 庫存標示管理

 珠寶電子產品

- 11 -

1.2 產品特色

機種

STANDARD

Advanced

PREMIUM

MH241

MH341

MH641

MH241T

MH341T

MH641T

MH241P

MH341P

MH641P

解析度

8 dots/mm

(203 DPI)

12

dots/mm

(300 DPI)

24

dots/mm

(600 DPI)

8 dots/mm

(203 DPI)

12

dots/mm

(300 DPI)

24

dots/mm

(600 DPI)

8 dots/mm

(203 DPI)

12

dots/mm

(300 DPI)

24

dots/mm

(600 DPI)

列印模式

熱轉式 / 熱感式

最大列印速度

356 mm

(14”)/second

305 mm

(12”)/seco

nd

152 mm

(6”)/secon

d

356 mm

(14”)/second

305 mm

(12”)/seco

nd

152 mm

(6”)/second

356 mm

(14”)/secon

d

305 mm

(12”)/secon

d

152 mm

(6”)/second

最大列印寬度

104 mm(4.09”)

最大列印長度

25,400 mm

(1000”)

11,430 mm

(450”)

2540 mm

(100”)

25,400 mm

(1000”)

11,430 mm

(450”)

2540 mm

(100”)

25,400 mm

(1000”)

11,430 mm

(450”)

2540 mm

(100”)

機殼

鋁合金鑄造列印基座與主結構、可折疊式金屬側蓋與透明大視窗設計

體積

276 mm (W) x 326 mm (H) x 502 mm (D)

10.87” (W) x 12.83” (H) x 19.76” (D)

276 mm (W) x 412 mm (H) x 502 mm

(D) 10.87” (W) x 16.22” (H) x 19.76”

(D)

重量

15.35kg (33.84 lbs)

15.43 kg (34.02 lbs)

18.93kg (41.73 lbs)

內部紙卷最大

尺寸

203.2 mm (8”) O.D.

內部回捲器

(整捲)

5 吋外徑標籤回捲模組(經銷商選配)

標準(最大外徑 8 吋)

碳帶

600 公尺，最大 90 毫米外徑，1" 碳帶捲軸 (內捲式和外捲式碳帶皆適用)

碳帶寬度

25.4 mm ~ 114.3 mm (1” ~ 4.5”)

中央處理器

32 位元高效處理器

記憶體

 512MB Flash memory

 256MB DDR2

 microSD 卡記憶體擴充插槽可擴充記憶體至 32 GB

- 12 -

通訊介面

 串列埠 (RS-232)

 USB 2.0

 內建式乙太網路伺服器

 USB host * 2，支援單機操作鍵盤與條碼掃描器

 GPIO + 並列埠 (Parallel) (出廠選配)

 MFi 藍牙 (出廠選配)

 802.11 a/b/g/n 無線網路插槽 (經銷商選配)

電源規格

內建電壓自動切換電源供應器

• 交流輸入：AC 100-240V, 4-2A, 50-60Hz

• 直流輸出： DC 5V, 5A; DC 24V, 7A; DC 36V, 1.4A; 共 243W

操作開關、按

鈕

一個電源開關、六個操作按鈕 (兩個功能鍵與四個方向鍵)、LED 指示燈 (3 種顏色: 綠、橘、紅)

操作面板

 3.5” 彩色螢幕，顯示幕 320 ×

240 畫素及背光顯示

 4.3” 彩色螢幕，顯示幕 480× 272 畫素及背光顯示

感測器

 紙張間距感應器(穿透式，位置可調整)

 黑線標記感應器(反射式，位置可調整)

 印字頭抬起感應器

 碳帶轉速感應器

 碳帶用盡感應器

日期/時間產

生器

 標準

內建字型

 八種點陣字型

 一套 Monotype® CG Triumvirate Bold Condensed 向量字型及 True Type Font 字型產生器

 可透過軟體下載 Windows 字型使用

條碼

一維條碼

Code 39, Code 93, Code128UCC, Code128 subsets A.B.C, Codabar, Interleave 2 of 5, EAN-8, EAN-13, EAN-128,

UPC-A, UPC-E, EAN and UPC 2(5) digits add-on, MSI, PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code 11, China

Post

二維條碼

PDF-417, Maxicode, DataMatrix, QR code, Aztec

字型及條碼旋

轉

0, 90, 180, 270 degree

指令集

TSPL-EZD (相容於 EPL, ZPL, ZPL II, DPL)

紙張類型

連續紙、間距紙、黑標紙、折疊紙、穿孔紙、吊牌、水洗標(外捲式)

紙張寬度

20 ~ 114 mm (0.79" ~ 4.5")

紙張厚度

0.06 ~ 0.28 mm (2.36 ~ 11 mil)

紙卷軸心尺寸

3.81mm/76.2mm (1.5”/ 3” )

標籤長度

5 ~ 25,400 mm (0.20” ~ 1,000”)

5 ~ 11,430 mm (0.20” ~ 450”)

5 ~ 2,540 mm (0.20” ~ 100”)

- 13 -

環境條件

操作環境 : 5 ~ 40°C，濕度 (非凝結) 25 ~ 85%

儲存環境 : -40 ~ 60°C，濕度 (非凝結) 10 ~ 90%

安規認證

FCC Class A, CE Class A, RCM Class A, UL, cUL, TÜ V/safety, CCC, KC, BIS, ENERGY STAR®

環境規範

符合 RoHS、WEEE

配件

 快速安裝指南

 USB 傳輸線

 電源線

出廠選配

 GPIO 介面模組 + 並列埠 (Parallel)

 內建式 MFi 藍牙無線傳輸模組

經銷商選配

一般切刀 (閘刀式)

 重度使用裁刀模組

Care label cutter kit 水洗標切刀模組



 High speed care label cutter kit

 Rotary heavy duty cutter kit

 1” I.D. core media spindle kit

 802.11 a/b/g/n/ac Wi-Fi + BT combo module kit (including slot-in

housing)

 Peel-off kit

 Internal rewinding kit (5” O.D.)

 802.11 a/b/g/n 無線網路模組

與藍芽模組

客戶選配

 802.11 a/b/g/n 無線網路模組與藍芽模組

 Cutter catch tray (Basic)

 Cutter catch tray UCT-Basic (Universal cutter catch tray-Basic)

 Cutter catch tray UCT (Universal cutter catch tray)

 單機操作鍵盤 KP-200 Plus keyboard display unit

- 14 -

2. 產品介紹

2.1 拆封與檢查

本印表機業經特殊包裝以抵抗運輸途中可能產生的損害。然而有鑒於印表機在運送的途中仍可能受

到意想不到的損害，因此建議您在收到印表機時，仔細檢查包裝及印表機裝置。萬一有明顯的損

傷，請直接接洽販售商店指明損傷的本質及程度；並請保留包裝材質，以便郵寄印表機。

當您收到您的條碼印表機之後，請將其置放於乾淨、平穩的桌面上，小心地拆開印表機的包裝。清

點是否包含以下的物品

請妥善保管印表機的包裝配備及材料以便日後搬運的需要；如果上述物品中，有任何短少或缺失，

請洽您購買商號的客戶服務部門。

Note: Check the production date

Serial NO.: XXX 17 22 XXXX

YEAR WEEK

Год Неделю

 條碼印表機一台 (MH241、MH241T 或 MH241P 系列)

 快速安裝指南一份

 電源線一條

 USB 介面傳輸線一條

- 15 -

2.2 印表機組件

2.2.1 外觀

MH241 系列

1. LED 輔助警示燈

2. 彩色液晶顯示幕

3. 面板操作按鍵

4. USB host x 2

5. 透明視窗

6. 列印出紙口

7. 印表機右側掀蓋把手

2

1

3

4

6

7

5

- 16 -

MH241P 系列

1. LED 輔助警示燈

2. 彩色液晶觸控顯示幕

3. 面板操作按鍵

4. USB host x 2

5. 透明視窗

6. 列印出紙口

7. 印表機右側掀蓋把手

2

1

3

4

6

7

5

8

- 17 -

MH241P 系列

1. LED 輔助警示燈

2. 彩色液晶觸控顯示幕

3. 面板操作按鍵

4. USB host x 2

5. 透明視窗

6. 列印出紙口

7. 印表機右側掀蓋把手

8. 印表機右側下蓋 (僅限 MH241P 系列)

2

1

3

4

6

7

5

8

- 18 -

2.2.2 內部

MH241 & MH241T 系列

1. 碳帶回收軸

2. 印字頭壓力位置調整鈕

3. 印字頭壓力調整鈕

4. 印字頭座架釋放桿

5. 碳帶供應軸

6. 紙張容量感應器(可移動，僅限 MH241T 系列)

7. 紙張固定桿

8. 紙張供應軸

9. 外部紙張進紙口

10. 紙張緩衝器

11. 後導紙器碳帶感應器

12. 橡膠滾輪

13. 黑標感應器 (以↓標註)

14. 間隙感應器 (以▽標註)

15. 前導紙器

16. 印字頭

- 19 -

MH241P 系列

1. 碳帶回收軸

2. 印字頭壓力位置調整鈕

3. 印字頭壓力調整鈕

4. 印字頭座架釋放桿

5. 印表機右側下蓋

6. 碳帶供應軸

7. 紙張容量感應器 (僅限 MH241T/MH241P 系列)

8. 標籤卷固定桿

9. 紙張供應軸

10. 標籤導紙桿

11. 紙張回收導紙桿

12. 紙張回收軸

13. 外部紙張進紙口

14. 紙張緩衝器

15. 碳帶感應器

16. 橡膠滾輪

17. 黑標感應器 (以↓標註)

18. 間隙感應器 (以▽標註)

19. 前導紙器

20. 印字頭

ページが読み込まれています...

TSC MH241 Series ユーザーマニュアル

TSC MH241 Series ユーザーマニュアル

関連論文

その他のドキュメント