TSC MH241 Series ユーザーマニュアル

1

使用者手册

MH241/MH341/MH641/

MH241T/MH341T/MH641T/

MH241P/MH341P/MH641P

系列

热转式

/

热感式条形码打印机

- 1 -

本手册和手册中所述之条形码打印机软件和固件版权均归 TSC Auto ID Technology Co., Ltd 所有。

本手册提供购买设备的操作者参考和使用，未经明确的书面许可，不得为了其他目的使用、复制。

所有其他品牌名称、产品名称或商标，隶属于其他个别拥有者。

因持续产品的改进，故手册中所述的机种规格、配件、零件、设计及程序内容以实机为主，如有变

更，恕不另行通知。

TSC 尽力确保手册内容正确无误，但错误在所难免。TSC 保留更正任何这类错误的权利，并声明

不对因此所造成的后果负责。

- 2 -

安规认证

EN 55032: Class A

EN 55024

EN 60950-1

EN 62368

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

FCC part 15B, Class A

ICES-003, Class A

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment.

Operation is subject to the following two conditions: (1) This device may cause

harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may

cause harmful interference with radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which

case you will be required to correct the interference at your own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conform à la norme NMB-

003 du Canada.

AS/NZS CISPR 32, Class A

UL 60950-1 (2nd Edition)

CSA C22.2 No. 60950-1-07 (2nd Edition)

UL 62368-1, 2nd Edition, 2014-12-

01 (Audio/video, Information and

Communication Technology Equipment - Part 1: Safety Requirements) CAN/CSA

C22.2 No. 62368-1-14, 2nd Edition, 2014-

12 (Audio/video, Information and

Communication Technology Equipment - Part 1: Safety Requirements)

EN 62368-1:2014/A11:2017

- 3 -

KN 32

KN 35

K60950-1(2011-12)

이 기기는 업무용(A 급) 전자파적합기기로서 판매자 또는 사용자는 이 점을

주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.

GB 4943.1

GB/T9254, Class A

GB 17625.1

此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰，

在这种情况下，可能需要用户对干扰采取切实可行的措施。

Energy Star for Imaging Equipment Version 3.0

IS 13252(Part 1)/

IEC 60950-1

Note: There may have certification differences in the series models, please refer to product label for

accuracy.

Important safety instructions:

1. Read all of these instructions and keep them for later use.

2. Follow all warnings and instructions on the product.

3. Disconnect the power from the AC inlet before cleaning or if fault happened.

Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.

4. The mains socket shall be installed near the equipment and easily accessible.

5. The unit must be protected against moisture.

6. Ensure the stability when installing the device, Tipping or dropping could cause damage.

7. Make sure to follow the correct power rating and power type indicated on marking label

provided by manufacture.

8. Please refer to user manual for maximum operation ambient temperature.

provided by manufacture.

WARNING:

Moving parts. Keep finger or body away from moving parts.

CAUTION:

(For equipment with RTC (CR2032) battery or rechargeable battery pack)

- 4 -

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the Instructions as below.

1. DO NOT throw the battery in fire.

2. DO NOT short circuit the contacts.

3. DO NOT disassemble the battery.

4. DO NOT throw the battery in municipal waste.

5. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in

municipal waste.

Caution: Hot surface for printhead.

Do not touch the printhead before it cooling.

WARNING:

Remove the power from AC inlet before opening the media cover for cleaning or repairing faults. After

cleaning or fixing faults, media cover closing before power connecting to AC inlet.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

CE Statement:

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20 cm between the radiator &

your body.

All operational modes:

2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)

5GHz: 802.11a,

The frequency, mode and the maximum transmitted power in EU are listed below:

2400 MHz – 2483.5 MHz: 19.88 dBm (EIRP)

5150 MHz – 5250 MHz: 17.51 dBm (EIRP)

5150-5350MHz for Only indoor use

5470-5725MHz for indoor/outdoor use

Restrictions In AZE

- 5 -

National restrictions information is provided below

Frequency Band

Country

Remark

5150-5350MHz

Azerbaijan

No license needed if used indoor and

power not exceeding 30mW

5470-5725MHz

Hereby, TSC Auto ID Technology Co., Ltd. declares that the radio equipment type [Wi-Fi] IEEE 802.11

a/b/g/n is in compliance with Directive 2014/53/EU

The full text of the EU declaration of conformity is available at the following internet address: http://

www.tscprinters.com

RF exposure warning (Wi-Fi)

This equipment must be installed and operated in accordance with provided instructions and must not

be co-located or operating in conjunction with any other antenna or transmitter. End-users and

installers must be providing with antenna installation instructions and transmitter operating conditions

for satisfying RF exposure compliance.

SAR Value: 0.736 W/kg

RF exposure warning (For Bluetooth)

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.

The equipment must not be co-located or operating in conjunction with any other antenna or

transmitter.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)

this device must accept any interference, including interference that may cause undesired operation of

the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency

exposure limits. The Wireless Device should be used in such a manner such that the potential for

human contact during normal operation is minimized.

This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”)

limits when installed in specific host products operated in portable exposure conditions. (For Wi-Fi)

This device has also been evaluated and shown compliant with the IC RF Exposure limits under

portable exposure conditions. (Antennas are less than 20 cm of a person's body). (For Bluetooth)

Canada, avis de l'Industry Canada (IC)

- 6 -

Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.

Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer

d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui

peuvent affecter son fonctionnement.

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par l’appareil sans fil est inférieure à la limite d'exposition aux

fréquences radio de l'Industry Canada (IC). Utilisez l’appareil sans fil de façon à minimiser les contacts

humains lors du fonctionnement normal.

Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption Rate – Taux

d'absorption spécifique) par l'IC lorsqu'il est connecté à des dispositifs hôtes spécifiques opérant dans

des conditions d’utilisation mobile. (Pour le Wi-Fi)

Ce périphérique a également été évalué et démontré conforme aux limites d'exposition radio-

fréquence par l'IC pour des utilisations par des opérateurs mobiles (les antennes sont à moins de 20

cm du corps d'une personne). (Pour le Bluetooth)

NCC

警语

:

经型式认证合格之低功率射频电机，非经许可，公司、商号或用户均不得擅自变更频率、加大功率或变

更原设计之特性及功能。(即低功率电波辐射性电机管理办法第十二条)

低功率射频电机之使用不得影响飞航安全及干扰合法通信；经发现有干扰现象时，应立即停用，并改善

至无干扰时方得继续使用。

前项合法通信，指依电信法规定作业之无线电通信。低功率射频电机须忍受合法通信或工业、科学及医

疗用电波辐射性电机设备之干扰。(即低功率电波辐射性电机管理办法第十四条)

For MFi Bluetooth

Use of the Made for Apple badge means that an accessory has been designed to connect specifically

to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple

performance standards. Apple is not responsible for the operation of this device or its compliance with

safety and regulatory standards.

For US Model

Made for iPhone®XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,

iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro® 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad® (6th generation),

iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air® 2,

iPad mini™ 4, iPad mini 3, iPad Air, iPad mini 2, iPod touch® (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries.

- 7 -

For JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,

iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation), iPad (5th generation),

iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,

iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

Except for US, JP Model

Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,

iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,

iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation), iPad (5th generation),

iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,

iPad mini 2, iPod touch (6th generation)

iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other

countries.

- 8 -

1. 打印机简介 ................................................................................................................ 10

1.1 介绍 ...................................................................................................................... 10

1.2 产品特色 ............................................................................................................... 11

2. 产品介绍 .................................................................................................................... 14

2.1 拆封与检查 ........................................................................................................... 14

2.2 打印机组件 ........................................................................................................... 15

2.2.1

外观

................................................................................................................................... 15

2.2.2

内部

................................................................................................................................... 18

2.2.3

后部

................................................................................................................................... 20

2.3 控制面板.............................................................................................................. 23

2.3.1 LED

辅助警示灯和操作按键

.............................................................................................. 24

2.3.2

主画面图标功能

................................................................................................................. 24

3. 安装 ........................................................................................................................... 25

3.1 安装打印机 .......................................................................................................... 25

3.2 安装碳带.............................................................................................................. 26

3.3 移除碳带 .............................................................................................................. 29

3.4 安装标签 ............................................................................................................. 30

3.4.1

安装标签

............................................................................................................................ 30

3.4.2

安装折迭式标签

(

外部进纸

) ................................................................................................ 33

3.4.3

剥纸模式装纸

(

选配，仅限

MH241P

系列

) ......................................................................... 34

3.4.4

整卷回收模式装纸

(

选配，仅限

MH241P

系列

) .................................................................. 36

4. 调整钮 ....................................................................................................................... 39

4.1 打印头压力调整钮 & 打印头压力位置调整钮 ..................................................... 39

4.2 碳带张力调整旋钮 ............................................................................................... 40

4.3 皱折解说及排除 ................................................................................................... 41

5. TSC Console................................................................................................................ 43

- 9 -

5.1 启动 TSC Console .................................................................................................. 43

5.2 设置 WiFi 并新增至 TSC Console 接口 ............................................................... 45

5.3 TPH CARE .......................................................................................................... 48

5.4 打印机功能 .......................................................................................................... 49

6.打印机菜单功能说明 .................................................................................................. 50

6.1 进入菜单 (以 240T 为范例) ................................................................................. 50

6.2 菜单简介 .............................................................................................................. 51

6.3 Setting(设置) ...................................................................................................... 52

6.3.1 TSPL ................................................................................................................................. 52

6.3.2 ZPL2 ................................................................................................................................. 54

6.4 Sensor(传感器设置) ............................................................................................ 57

6.5 Interface(通讯接口) ............................................................................................ 58

6.5.1 Serial Comm. (

串口设置

) ................................................................................................. 58

6.5.2 Ethernet(

以太网络设置

) ................................................................................................... 59

6.5.3 Wi-Fi(

无线网络

)................................................................................................................. 60

6.5.4 Bluetooth(

蓝牙

) ................................................................................................................ 61

6.5.5 GPIO ................................................................................................................................. 61

6.6 Advanced(高级) .................................................................................................. 62

6.7 File Manager(文件管理) ..................................................................................... 64

6.8 Diagnostic(打印机诊断) ..................................................................................... 65

6.9 Favorites(收藏夹) ............................................................................................... 67

7.故障排除 ..................................................................................................................... 68

8. 打印机简易保养 ......................................................................................................... 71

更新记录 ........................................................................................................................ 72

- 10 -

1.

打印机简介

1.1

介绍

感谢您对本公司所出品的条形码打印机的支持。

此 MH241 系列工业型条形码标签打印机具备扎实坚固之机身设计，可满足企业大量标签打印之任

务。内含高速处理器，可大幅提升打印效能，尤其适用于制造业、物流运输业与产品标签打印之应

用。此高阶工业型条形码标签打印机可满足企业用户 24 小时连续大量标签打印之需求，金属铸造

打印机构模块搭配强固之机身，耐用度高且稳定性佳。

本系列机种包含 MH241、MH241T 及 MH241P 三种系列，共有九种机型，其中 203 dpi 系列最高

打印速度达每秒 14 英吋、300 dpi 系列最高打印速度达每秒 12 英吋，以及 600 dpi 系列最高打印

速度可达每秒 6 英吋，并可应用于二维条形码、图示、小字或其他超高解析打印需求之图形标签。

标配包含彩色触控面板(MH241T 与 MH241P 系列)与六个操作按钮、碳带最大容量可达 600 公尺、

标签耗材最大外径八英吋(20.32 公分)、内建式以太网络服务器、两个 USB 主控端接口、USB 2.0、

串口、可选配之并口通讯接口、GPIO 接口及内建蓝牙模块。

字型和条形码可以朝四个方向印出，本机型有内建高质量高效率的 MONOTYPE IMAGING

®

仿真字

型(True Type Font)引擎和 CG Triumvirate Bold Condensed 平滑字型。搭配灵活的固件设计, 用户

也可以自行从计算机下载 True Type Font 字型到打印机的内存中。除了可以缩放字体外，还提供了

五种不同尺寸的字母数字图(bitmap font)。

本文件提供了此机种的操作说明，于打印标签格式时，请参阅您的标签编辑软件所提供的信息，如

果你需要自行编写指令程序，请参阅 TSPL/TSPL2 指令手册，您可于 TSC 网站

http://www.tscprinters.com 上下载此指令手册。

− 适用范围



工厂大量标签打印 

物流标示管理



制造标示 

资产标示管理



产品规范标签 

医疗用标签



产品规范标签 

水洗标



库存标示管理 

珠宝电子产品

- 11 -

1.2

产品特色

机种

STANDARD

Advanced

PREMIUM

MH241 MH341 MH641 MH241T MH341T MH641T MH241P MH341P MH641P

分辨率

8

dots/mm

(203 DPI)

12

dots/mm

(300 DPI)

24

dots/mm

(600 DPI)

8

dots/mm

(203 DPI)

12

dots/mm

(300 DPI)

24

dots/mm

(600 DPI)

8

dots/mm

(203 DPI)

12

dots/mm

(300 DPI)

24

dots/mm

(600 DPI)

打印模式

热转式 / 热感式

最大打印速度

356 mm

(14”)/second

305 mm

(12”)/seco

nd

152 mm

(6”)/secon

d

356 mm

(14”)/second

305 mm

(12”)/seco

nd

152 mm

(6”)/second

356 mm

(14”)/secon

d

305 mm

(12”)/secon

d

152 mm

(6”)/second

最大打印宽度

104 mm(4.09”)

最大打印长度

25,400 mm

(1000”)

11,430 mm

(450”)

2540 mm

(100”)

25,400 mm

(1000”)

11,430 mm

(450”)

2540 mm

(100”)

25,400 mm

(1000”)

11,430 mm

(450”)

2540 mm

(100”)

机壳

铝合金铸造打印基座与主结构、可折迭式金属侧盖与透明大窗口设计

体积

276 mm (W) x 326 mm (H) x 502 mm (D)

10.87” (W) x 12.83” (H) x 19.76” (D)

276 mm (W) x 412 mm (H) x 502 mm

(D) 10.87” (W) x 16.22” (H) x 19.76”

(D)

重量

15.35kg (33.84 lbs) 15.43 kg (34.02 lbs) 18.93kg (41.73 lbs)

内部纸卷最大

尺寸

203.2 mm (8”) O.D.

内部回卷器

(

整卷

)

5 吋外径标签回卷模块(经销商选配) 标准(最大外径 8 吋)

碳带

600 公尺，最大 90 毫米外径，1" 碳带滚动条 (内卷式和外卷式碳带皆适用)

碳带宽度

25.4 mm ~ 114.3 mm (1” ~ 4.5”)

中央处理器

32 位高效处理器

内存



512MB Flash memory

 256MB DDR2



microSD

卡内存扩充插槽可扩展内存至

32 GB

- 12 -

通讯接口



串口 (RS-232)

 USB 2.0

 内建式以太网络服务器

 USB host * 2，支持单机操作键盘与条形码扫描仪

 GPIO + 并口 (Parallel) (出厂选配)

 MFi 蓝牙 (出厂选配)



802.11 a/b/g/n

无线网络插槽

(

经销商选配

)

电源规格

内建电压自动切换电源供应器

• 交流输入：AC 100-240V, 4-2A, 50-60Hz

• 直流输出： DC 5V, 5A; DC 24V, 7A; DC 36V, 1.4A; 共 243W

操作开关、按

钮

一个电源开关、六个操作按钮 (两个功能键与四个箭头键)、LED 指示灯 (3 种颜色: 绿、橘、红)

操作面板

 3.5” 彩色屏幕，显示屏 320 ×

240 画素及背光显示

 4.3” 彩色屏幕，显示屏 480× 272 画素及背光显示

传感器



纸张间距传感器(穿透式，位置可调整)

 黑线标记传感器(反射式，位置可调整)

 打印头抬起传感器

 碳带转速传感器



碳带用尽传感器

日期/时间产

生器

 标准

内建字型



八种位图字体

 一套 Monotype® CG Triumvirate Bold Condensed 向量字体及 True Type Font 字型产生器



可通过软件下载

Windows

字型使用

条形码

一维条形码

Code 39, Code 93, Code128UCC, Code128 subsets A.B.C, Codabar, Interleave 2 of 5, EAN-8, EAN-13, EAN-128,

UPC-A, UPC-E, EAN and UPC 2(5) digits add-on, MSI, PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code 11, China

Post

二维条形码

PDF-417, Maxicode, DataMatrix, QR code, Aztec

字型及条形码

旋转

0, 90, 180, 270 degree

指令集

TSPL-EZD (相容于 EPL, ZPL, ZPL II, DPL)

纸张类型

连续纸、间距纸、黑标纸、折迭纸、穿孔纸、吊牌、水洗标(外卷式)

纸张宽度

20 ~ 114 mm (0.79" ~ 4.5")

纸张厚度

0.06 ~ 0.28 mm (2.36 ~ 11 mil)

纸卷轴心尺寸

3.81mm/76.2mm (1.5”/ 3” )

标签长度

5 ~ 25,400 mm (0.20” ~ 1,000”)

5 ~ 11,430 mm (0.20” ~ 450”)

5 ~ 2,540 mm (0.20” ~ 100”)

- 13 -

环境条件

操作环境 : 5 ~ 40°C，湿度 (非凝结) 25 ~ 85%

储存环境 : -40 ~ 60°C，湿度 (非凝结) 10 ~ 90%

安规认证

FCC Class A, CE Class A, RCM Class A, UL, cUL, TÜV/safety, CCC, KC, BIS, ENERGY STAR®

环境规范

符合 RoHS、WEEE

配件



快速安装指南

 USB 传输线



电源线

出厂选配

 GPIO 接口模块 + 并口 (Parallel)

 内建式 MFi 蓝牙无线传输模块

经销商选配

一般切刀

(

闸刀式

)

 重度使用裁刀模块

Care label cutter kit 水洗标切刀模块



 High speed care label cutter kit

 Rotary heavy duty cutter kit

 1” I.D. core media spindle kit

 802.11 a/b/g/n/ac Wi-Fi + BT combo module kit (including slot-in

housing)

 Peel-off kit



Internal rewinding kit (5” O.D.)

 802.11 a/b/g/n 无线网络模块

与蓝芽模块

客户选配



802.11 a/b/g/n 无线网络模块与蓝芽模块

 Cutter catch tray (Basic)

 Cutter catch tray UCT-Basic (Universal cutter catch tray-Basic)

 Cutter catch tray UCT (Universal cutter catch tray)



单机操作键盘

KP-200 Plus keyboard display unit

- 14 -

Note: Check the production date

Serial NO.: XXX 17 22 XXXX

YEAR WEEK

Год Неделю

2. 产品介绍

2.1 拆封与检查

本打印机业经特殊包装以抵抗运输途中可能产生的损害。然而有鉴于打印机在运送的途中仍可能受

到意想不到的损害，因此建议您在收到打印机时，仔细检查包装及打印机装置。万一有明显的损伤，

请直接接洽贩卖商店指明损伤的本质及程度；并请保留包装材质，以便邮寄打印机。

当您收到您的条形码打印机之后，请将其置放于干净、平稳的桌面上，小心地拆开打印机的包装。

清点是否包含以下的物品

请妥善保管打印机的包装配备及材料以便日后搬运的需要；如果上述物品中，有任何短少或缺失，

请联系您购买商号的客户服务部门。

 条形码打印机一台 (MH241、MH241T 或 MH241P 系列)

 快速安装指南一份

 电源线一条

 USB 接口传输线一条

- 15 -

2.2

打印机组件

2.2.1

外观

MH241

系列

1. LED 辅助警示灯

2. 彩色液晶显示屏

3. 面板操作按键

4. USB host x 2

5. 透明窗口

6. 打印出纸口

7. 打印机右侧掀盖把手

2

1

3

4

6

7

5

- 16 -

MH241P

系列

1. LED 辅助警示灯

2. 彩色液晶触控显示屏

3. 面板操作按键

4. USB host x 2

5. 透明窗口

6. 打印出纸口

7. 打印机右侧掀盖把手

2

1

3

4

6

7

5

8

- 17 -

MH241P

系列

1. LED 辅助警示灯

2. 彩色液晶触控显示屏

3. 面板操作按键

4. USB host x 2

5. 透明窗口

6. 打印出纸口

7. 打印机右侧掀盖把手

8. 打印机右侧下盖 (仅限 MH241P 系列)

2

1

3

4

6

7

5

8

- 18 -

2.2.2

内部

MH241 & MH241T

系列

1. 碳带回收轴

2. 打印头压力位置调整钮

3. 打印头压力调整钮

4. 打印头座架释放杆

5. 碳带供应轴

6. 纸张容量传感器(可移动，仅限 MH241T 系列)

7. 纸张固定杆

8. 纸张供应轴

9. 外部纸张进纸口

10. 纸张缓冲器

11. 后导纸器碳带传感器

12. 橡胶滚轮

13. 黑标传感器 (以↓标注)

14. 间隙传感器 (以▽标注)

15. 前导纸器

16. 打印头

- 19 -

MH241P

系列

1. 碳带回收轴

2. 打印头压力位置调整钮

3. 打印头压力调整钮

4. 打印头座架释放杆

5. 打印机右侧下盖

6. 碳带供应轴

7. 纸张容量传感器 (仅限 MH241T/MH241P 系列)

8. 标签卷固定杆

9. 纸张供应轴

10. 标签导纸杆

11. 纸张回收导纸杆

12. 纸张回收轴

13. 外部纸张进纸口

14. 纸张缓冲器

15. 碳带传感器

16. 橡胶滚轮

17. 黑标传感器 (以↓标注)

18. 间隙传感器 (以▽标注)

19. 前导纸器

20. 打印头

ページが読み込まれています...

TSC MH241 Series ユーザーマニュアル

TSC MH241 Series ユーザーマニュアル

関連論文

その他のドキュメント