TSC ML240 Series ユーザーマニュアル

カテゴリー
ラベルプリンター
タイプ
ユーザーマニュアル
1
使用者手
ML240/ ML340/ ML240P/ ML340P
系列
轉式 / 式條碼印表機
- i -
版權聲明
© 2019 TSC Auto ID Technology Co., Ltd,
本手冊和手冊中所述之條碼印表機軟體和韌體版權均歸 TSC Auto ID Technology Co., Ltd
所有。本手冊提供購買設備的操作者參考和使用,未經明確的書面許可,不得為了其他目
使用、複製。
所有其他品牌名稱、產品名稱或商標,隸屬於其他個別擁有者。
因持續產品的改進,故手冊中所述的機種規格、配件、零件、設計及程式內容以實機為主,
如有變更,恕不另行通知。
TSC 盡力確保手冊內容正確無誤,但錯誤在所難免。TSC 保留更正任何這類錯誤的權利
並聲明不對因此所造成的後果負責。
- ii -
安規認證
EN 55032, Class A
EN 55035
EN 60950-1
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC part 15B, Class A
ICES-003, Class A
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may
cause harmful interference with radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case you will
be required to correct the interference at your own expense.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conform à la norme NMB-003 du
Canada.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
AS/NZS CISPR 32, Class A
UL 62368-1
CSA C22.2 No. 62368-1
EN 62368-1
KN 32 / KN 35 / K 60950-1
기기는 업무용(A ) 전자파적합기기로서 판매자 또는 사용자는 점을
주의하시기 바라며, 정외의 지역에 사용하는 것을 목적으로 합니.
- iii -
GB 4943.1
GB/T9254, Class A
GB 17625.1
此为 A 级产品,在生活环境中,该产品可能会造成无线电干扰,
在这种情况下,可能需要用户对干扰采取切实可行的措施。
Energy Star for Imaging Equipment Version 2.0
IS 13252(Part 1)/
IEC 60950-1
CNS 13438
CNS 14336-1
CNS 15663
LP0002
Note: There may have certification differences in the series models, please refer to product label for accuracy.
Important safety instructions:
1. Read all of these instructions and keep them for later use.
2. Follow all warnings and instructions on the product.
3. Disconnect the power plug from the AC outlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4. The mains socket shall be installed near the equipment and easily accessible.
5. The unit must be protected against moisture.
6. Ensure the stability when installing the device, Tipping or dropping could cause damage.
7. Make sure to follow the correct power rating and power type indicated on marking label provided by
manufacture.
8. Please refer to user manual for maximum operation ambient temperature.
WARNING:
Hazardous moving parts, keep fingers and other body parts away.
- iv -
CAUTION:
(For equipment with RTC (CR2032) battery or rechargeable battery pack)
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the Instructions as below.
1. DO NOT throw the battery in fire.
2. DO NOT short circuit the contacts.
3. DO NOT disassemble the battery.
4. DO NOT throw the battery in municipal waste.
5. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
Caution: The printhead may be hot and could cause severe burns. Allow the printhead to cool.
WARNING:
For operation safety, please turn off the power by the power switch before opening the media cover to load labels,
ribbons, or to repair. After completing the steps, please close the media cover first and then turn on the power to
start printing.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority
to operate the equipment.
Below statement are for product with optional RF function.
CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
All operational modes:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)
5GHz: 802.11a,
- v -
The frequency, mode and the maximum transmitted power in EU are listed below:
2400 MHz 2483.5 MHz: 19.88 dBm (EIRP)(Wi-Fi)
5150 MHz 5250 MHz: 17.51 dBm (EIRP)(Wi-Fi)
2402 MHz 2480 MHz: 6.02 dBm (EIRP)(Bluetooth)
Requirements in
AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/H
R. 5150MHz~5350MHz is for indoor use only.
5150-5350MHz for Only indoor use
5470-5725MHz for indoor/outdoor use
Restrictions In AZE
National restrictions information is provided below
Frequency Band
Remark
5150-5350MHz
No license needed if used indoor and
power not exceeding 30mW
5470-5725MHz
Hereby, TSC Auto ID Technology Co., Ltd. declares that the radio equipment type [Wi-Fi] IEEE 802.11 a/b/g/n is
in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address:
https://www.tscprinters.com/EN/support
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Canada, avis de l'Industry Canada (IC)
- vi -
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence
et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son
fonctionnement.
NCC 警語:
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計
之特性及功能。(即低功率電波輻射性電機管理辦法第十二)
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時
方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻
射性電機設備之干擾。(即低功率電波輻射性電機管理辦法第十四條)
BSMI Class A 警語:
這是甲類的資訊產品,在居住的環境使用中時,可能會造成射頻干擾,在這種情況下,使用者會被要求採取某些適
當的對策。
MFi for Bluetooth
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the
Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
For US Model
Made for iPhone® XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,
iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,
iPad Pro® 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad® (6th generation),
iPad (5th generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air® 2,
iPad mini™ 4, iPad mini 3, iPad Air, iPad mini 2, iPod touch® (6th generation)
- vii -
iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
For JP Model
Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,
iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,
iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation), iPad (5th generation),
iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,
iPad mini 2, iPod touch (6th generation)
iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The
trademark “iPhone” is used in Japan with a license from Aiphone K.K.
Except for US, JP Model
Made for iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7,
iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,
iPad Pro 12.9-inch (2nd generation), iPad Pro 10.5-inch, iPad (6th generation), iPad (5th generation),
iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad Air,
iPad mini 2, iPod touch (6th generation)
iPad, iPad Air, iPad Pro, iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
- viii -
單元Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
內外塑膠件
內外鐵件
-
滾輪
銘版
電路板
-
晶片電阻
-
積層陶瓷表面
黏著電容
集成電路-IC
-
電源供應器
印字頭
-
馬達
-
液晶顯示器
-
插座
-
線材
-
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1Exceeding 0.1 wt %” and exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the
reference percentage value of presence condition.
備考 2.〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考 3.〝-〞係指該項限用物質為排除項目。
Note 3The “−” indicates that the restricted substance corresponds to the exemption.
- ix -
目錄
1. 印表機簡介 .................................................................................................................... 1
1.1 介紹 .......................................................................................................................... 1
1.2 產品特色 .................................................................................................................. 2
1.2.1 標準配備 ........................................................................................................................... 2
1.2.2 選購配備 ........................................................................................................................... 4
1.3 一般規格 .................................................................................................................. 4
1.4 列印規格................................................................................................................... 4
1.5 碳帶規格 .................................................................................................................. 5
1.6 紙張規格 .................................................................................................................. 5
2. 產品介紹........................................................................................................................ 6
2.1 拆封與檢查 .............................................................................................................. 6
2.2 印表機組件 .............................................................................................................. 7
2.2.1 外觀 .................................................................................................................................. 7
2.2.2 內部 .................................................................................................................................. 9
2.2.3 後部 ................................................................................................................................ 10
2.3 前方面板顯示及操作 ............................................................................................. 12
2.3.1 LED 輔助警示燈和操作按鍵 ............................................................................................ 12
2.3.2 LCD 主畫面圖示功能 (僅限 ML240P 系列) ...................................................................... 12
3. 安裝 ............................................................................................................................. 14
3.1 安裝印表機 ............................................................................................................ 14
3.2 安裝碳帶 ............................................................................................................... 15
3.3 移除碳帶................................................................................................................ 18
3.4 安裝標籤 ............................................................................................................... 19
3.4.1 安裝標籤 ......................................................................................................................... 19
- x -
3.4.2 安裝摺疊式標籤(外部進紙) .............................................................................................. 21
3.4.3 剝紙模式裝紙(僅限 ML240P 列選配) ........................................................................... 22
3.4.4 裁刀模式裝紙(僅限 ML240P 列選配)............................................................................ 24
4. 調整鈕 ......................................................................................................................... 26
4.1 印字頭壓力位置調整鈕 ......................................................................................... 26
4.2 碳帶張力調整旋鈕 ................................................................................................ 27
4.3 皺摺解說及排除 .................................................................................................... 28
5. 印表機診斷工具(Diagnostic Tool) .............................................................................. 30
5.1 啟用 Diagnostic Tool 工具程式 ............................................................................. 30
5.2 印表機功能設定 .................................................................................................... 31
5.3 使用印表機診斷工具(Diagnostic Tool)設定乙太網路 .......................................... 32
5.3.1 經由 USB 面設定 ......................................................................................................... 32
5.3.2 經由 RS-232 介面設定 .................................................................................................... 33
5.3.3 經由 Ethernet 面設定 .................................................................................................. 34
6. LCD Menu 功能 (僅限 ML240P 系列) ....................................................................... 36
6.1 進入選單 ................................................................................................................ 36
6.2 選單簡介 ............................................................................................................... 37
6.3 Setting ................................................................................................................... 38
6.3.1 TSPL .............................................................................................................................. 38
6.3.2 ZPL2 .............................................................................................................................. 40
6.4 Sensor(感應器設定) ............................................................................................. 43
6.5 Interface(介面) ..................................................................................................... 44
6.5.1 Serial Comm. (列埠設定)............................................................................................ 44
6.5.2 Ethernet(乙太網路設定) ................................................................................................. 45
6.5.3 Wi-Fi(無線網路) .............................................................................................................. 46
6.5.4 Bluetooth(藍牙) ............................................................................................................. 46
- xi -
6.6 Advanced .............................................................................................................. 47
6.7 File Manager(檔案管理) ....................................................................................... 49
6.8 Diagnostic(印表機診斷) ....................................................................................... 50
6.9 Favorites(我的最愛) ............................................................................................. 52
7. 故障排除...................................................................................................................... 53
8. 印表機簡易保養 .......................................................................................................... 55
更新記錄 .......................................................................................................................... 56
- 1 -
1. 印表機簡介
1.1 介紹
感謝您支持本公司所出品的條碼印表
ML240系列工業型條碼標籤列印具備紮實堅固且精巧圓潤之機身設計,可適用於多種
環境,並同時滿足企業大量標籤列印之任務。內含高速處理器,可大幅提升列印效能,尤
適用於製造業、物流運輸業與產品標籤列印之應用。此工業型條碼標籤列印機為鋁合金鑄造
列印機構模組之機身,可滿足企業用戶 24 小時連續大量標籤列印之需求,擁有極佳穩定性
且耐用度高。
本系列機種包含 ML240/ ML240P (203 dpi) ML340/ ML340P (300 dpi)共四種機型,其中
ML240/ ML240P 系列最高列印速度達每秒 6英吋、ML340/ ML340P系列最高列印速度可達
每秒 5英吋,並可應用於二維條碼、圖示、小字或其他超高解析列印需求之圖形標籤。
ML240系列隨附一個三色 LED警示燈及兩個複合鍵;ML240P 系列另有 LCD 螢幕及四個方
向鍵方便操作。碳帶最大容量高達 450 公尺、標籤耗材最大外徑 5.5英吋(13.97公分)。人
性化的操作介面及容量設計,讓使用可兼顧成本考量並輕鬆上手。
字型和條碼可以朝四個方向印出,本機型有內建高品質高效率的 MONOTYPE IMAGING
®
仿真字型(True Type Font)引擎和 CG Triumvirate Bold Condensed 平滑字型。搭配靈活的
韌體設計, 使用者也可以自行從電腦下載 True Type Font字型到印表機的記憶體中。除了
以縮放字體外,還提供了五種不同尺寸的字母數字(bitmap font)
本文件提供此機種的操作說明及產品規格,列印標籤格式時,請參閱您的標籤編輯軟體所提
供的資訊,如果你需要自行編寫指令程式,請參閱 TSPL/TSPL2 令手冊,您可於 TSC
http://www.tscprinters.com上下載此指令手冊。
應用範圍
包裝
規範標籤
訂單管理
血液檢驗試管標籤
運輸與收貨
病患手腕帶標籤
庫存管理
產品標籤
製造標示
活動票券
商品標示
- 2 -
1.2 產品特色
1.2.1 標準配備
此機種提供下方標準功能:
產品標準配備
型號
ML240
ML340
ML240P
ML340P
印字頭解析度
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
列印模式
熱轉式/熱感式列印
機身
鋁合金鑄造機身
控制面板
2個操作按鍵(/停、右/進紙)
1顆三色LED警示燈
2個複合鍵(功能以螢幕圖示為準)
4個方向鍵
1顆三色LED警示燈
處理
32位元高效處理器
記憶
8MB Flash memory
16MB DRAM
128MB Flash memory
64MB DRAM
通訊介面
USB 2.0通訊介面(High speed mode)
USB 2.0 通訊介面(High speed mode)
內建乙太網路列印伺服器(10/100 Mbps) 通訊介面
RS-232通訊介面 (Max. 115,200 bps)
USB主控端介面:連barcode scannerPC
keyboardUSB儲存裝置)
感應
間隙感應器 / 穿透式
(可調整範圍:5mm 88mm)
黑標感應器/反射式
(可調整範圍: 0mm 81.7mm)
碳帶結束感應器
印字頭開啟感應
間隙感應器 / 穿透式
(可調整範圍:5mm 88mm)
黑標感應器/反射式
(可調整範圍: 0mm 81.7mm)
碳帶結束感應器
印字頭開啟感應
內建字型
內建 8 種點陣英數字型
內建 1 Monotype Imaging® 向量字型
內建 Monotype True Type Font engine
- 3 -
支援字元集
Codepage 437 (English - US)
Codepage 737 (Greek) -
Codepage 850 (Latin-1)
Codepage 852 (Latin-2)
Codepage 855 (Cyrillic) -
Codepage 857 (Turkish)
Codepage 860 (Portuguese)
Codepage 861 (Icelandic) -
Codepage 862 (Hebrew) -
Codepage 863 (French Canadian)
Codepage 864 (Arabic) -
Codepage 865 (Nordic)
Codepage 866 (Russian) -
Codepage 869 (Greek 2) -
Codepage 950 (Traditional Chinese)
Codepage 936 (Simplified Chinese)
Codepage 932 (Japanese)
Codepage 949 (Korean)
Codepage 1250 (Latin-2)
Codepage 1251 (Cyrillic)
Codepage 1252 (Latin-1)
Codepage 1253 (Greek)
Codepage 1254 (Turkish)
Codepage 1255 (Hebrew) -
Codepage 1256 (Arabic)
Codepage 1257 (Baltic)
Codepage 1258 (Vietnam)
ISO-8859-1: Latin-1 (Western European)
ISO-8859-2: Latin-2 (Central European)
ISO-8859-3: Latin-3 (South European)
ISO-8859-4: Latin-4 (North European)
ISO-8859-5: Cyrillic
ISO-8859-6: Arabic
ISO-8859-7: Greek
ISO-8859-8: Hebrew
ISO-8859-9: Turkish
ISO-8859-10: Nordic
ISO-8859-15: Latin-9
UTF-8
支援條碼
1D bar code
2D bar code
Code128 subsets A.B.C,
Code128UCC, EAN128,
Interleave 2 of 5, Code 39, Code
93, EAN-13, EAN-8, Codabar,
POSTNET, UPC-A, UPC-E, EAN
and UPC 2(5) digits add-on, MSI,
PLESSEY, China Post, ITF14,
EAN14, Code 11, TELPEN,
PLANET, Code 49, Deutsche
Post Identcode, Deutsche Post
Leitcode, LOGMARS, RSS-
Stacked, GS1 DataBar.
CODABLOCK F mode,
DataMatrix, Maxicode, PDF-
417, Aztec, MicroPDF417, QR
code, RSS Barcode (GS1
Databar), TLC 39, RSS
支援程式語言
TSPL-EZD
TM
字型與條碼旋
轉方
0, 90, 180, 270
其他
可支援模擬其它品牌(Eltron
®
Zebra
®
條碼機之程式語言
內建Monotype True Type Font engine
可下載電腦系統字型到印表機使用
- 4 -
1.2.2 選購配備
此機種提供下方選購功能
產品選購配備
ML240/ ML340
ML240P/ ML340P
客戶選配
出廠選配
客戶選配
經銷商選配
出廠選配
單機操作鍵盤KP-200 Plus
前方面板內建藍4.2 MFi 模組
Wi-Fi 模組 (不附插槽)
Wi-Fi 模組 (附插槽)
閘刀式切刀模組
(最高列印速度:4 ips/ 適用紙張厚度:0.06
~ 0.28 mm/ 適用紙張:收據紙、吊牌及不
背膠之標籤紙)
剝紙模組
裁刀承紙托盤模
備註1. Wi-Fi 與藍芽模組只能擇一安裝
2. 除了不沾膠切刀外, 所有 TSC 切刀組皆不可切於含背膠的標籤上
1.3 一般規格
一般規格
型號
ML240
ML340
ML240P
ML340P
印表
體積尺寸
248 (W) x 245 (H) x 330 (D) mm
重量
7.4 kg
7.6 kg
電源
內建電壓自動切換電源供應(20% print ratio)
輸入AC 100-240V, 1.5A, 50/ 60Hz
輸出DC 24V, 2.5A; 60W
環境條件
操作環境: 5 ~ 40˚C (41 ~ 104˚F), 25~85%濕度
(非凝結)
操作環境: 0 ~ 40˚C (32 ~ 104˚F), 25~85%濕度
(非凝結)
儲存環境: -40 ~ 60 ˚C (-40 ~ 140˚F), 10~90%濕度(非凝結)
環境規範
符合Energy Star 2.0REACHRoHSWEEE
1.4 規格
列印規格
203 dpi models
300 dpi models
印字頭解析度
(dots per inch/mm)
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
列印模式
熱轉式 / 熱感式
- 5 -
Dot size(的尺寸)
( x )
0.125 x 0.125 mm
(1 mm = 8 dots)
0.084 x 0.084 mm
(1 mm = 12 dots)
列印速度
(inches per second)
可選擇1, 2, 3, 4, 5, 6 ips
最快6 ips
可選擇1, 2, 3, 4, 5 ips
最快5 ips
最大列印寬度
108 mm (4.25”)
105.7 mm (4.16”)
最大列印長度
ML240: 110 (2,794 mm)
ML240P: 1000” (25,400 mm)
ML340: 40” (1,016 mm)
ML340P: 450” (11,430 mm)
列印偏移量
垂直: 最大 1 mm
水平: 最大 1 mm
1.5 碳帶規格
碳帶規格
碳帶外徑
最大81.3 mm O.D.
碳帶長度
450 m
碳帶軸心尺寸
1” (25.4 mm)
碳帶寬度
40 mm ~ 110 mm (1.57” ~ 4.33”)
碳帶纏繞型式
外捲式 / 內捲式
註:為獲得較佳列印效果,建議選擇比標籤寬度更的碳帶。
1.6 紙張規格
紙張規格
內部紙卷最大容量外徑
5.5” O.D; 1” 1.5” I.D 軸心
紙卷軸心尺寸
1”~ 1.5” (25.4 mm ~ 38.1 mm) I.D. 軸心
紙張類型
連續紙、間隙紙、黑標紙, 摺疊, 穿孔紙
紙張纏繞型式
列印面外捲式
紙張寬度
20 mm ~ 118 mm (0.79” ~ 4.65”)
剝紙/裁切模式:20 mm ~ 114.3 mm (0.79” ~ 4.5”)
紙張厚度
0.06 mm ~ 0.19 mm
標籤長度
5 mm ~ 25,400 mm (203 dpi機種)
5 mm ~ 11,430 mm (300 dpi機種)
標籤長度(剝紙模式)
25.4mm ~ 152.4mm (1” ~ 6”)
標籤長度(裁刀模式)
25.4~2,794 mm (1 ~ 110) ----- 203 dpi機種
25.4~1,016 mm (1 ~ 40) ------ 300 dpi機種
黑標紙黑標尺寸
最小 8 mm (W) x 2 mm (H)
間隙紙間距高
最小 2 mm
- 6 -
Note: Check the production date
Serial NO.: XXX 17 22 XXXX
YEAR WEEK
Год Неделю
2. 產品介紹
2.1 拆封與檢查
本印表機業經特殊包裝以抵抗運輸途中可能產生的損害。然而有鑒於印表機在運送的途中仍可能受到意想不到
的損害,因此建議您在收到印表機時,仔細檢查包裝及印表機裝置。萬一有明顯的損傷,請直接接洽販售商店
指明損傷的本質及程度;並請保留包裝材質,以便郵寄印表機
當您收到您的條碼印表機之後,請將其置放於乾淨、平穩的桌面上,小心地拆開印表機的包裝。清點是否包含
以下的物品:
請妥善保管印表機的包裝配備及材料以便日後搬運的需要;如果上述物品中,有任何短少或缺失,請洽您購買
商號的客戶服務部門。
MB240T Series
MB240 Series
條碼印表機一台
快速安裝指南一份
電源線一條
USB 介面傳輸線一
光碟片一份
- 7 -
2.2 印表機組件
2.2.1 外觀
ML240 系列
1. LED 輔助警示
2. 面板操作按鍵及標示
3. 透明視窗
4. 列印出紙口
5. 條碼機右側掀蓋把手
1
3
4
2
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70

TSC ML240 Series ユーザーマニュアル

カテゴリー
ラベルプリンター
タイプ
ユーザーマニュアル