MIMAKI TS55-1800 取扱説明書

MIMAKI ENGINEERING CO., LTD.

https://mimaki.com/

https://japan.mimaki.com/

English

Japanese

Foreword ................................................................... 2

Safety Precautions ................................................... 3

Warning labels .......................................................... 5

Name of Each Part .................................................... 6

Combination of optional units ................................. 8

Set media ................................................................. 11

How to attach media edge guide ........................... 22

Specifications ......................................................... 28

はじめに ................................................................... 30

安全にお使いいただくために ................................... 31

警告ラベルについて ................................................. 33

各部の名称 ................................................................ 34

オプションユニットの組み合わせ ............................ 36

メディアをセットする .............................................. 39

端面ガイドを取り付ける .......................................... 50

仕様 ........................................................................... 56

D203325-13

OPT-J0477,OPT-J0478,OPT-J0479

Transportation unit

搬送ユニット

2

Foreword

Congratulations on your purchase of the transportation unit.

This operation manual

• This manual explains the operation of the transportation unit.

• Please read and fully understand this operation manual before using the printer. It is also necessary to keep this opera-

tion manual on hand.

• Make arrangements to deliver this operation manual to the person in charge of the operation of the transportation unit.

• Although this operation manual has been carefully prepared for your easy understanding, please do not hesitate to con-

tact your local distributor if you have any inquiry.

• The contents of this operation manual are subject to change for improvement without notice. Please note.

• If this manual should become illegible due to damage, or is destroyed due to fire or similar reason, purchase another copy

of the operation manual at our sales office.

CAUTION

THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MER-

CHANTABILITY OR FITNESS, AND MIMAKI NEITHER ASSUMES NOR AUTHORIZES DEALERS TO ASSUME FOR IT ANY

OTHER OBLIGATION OR LIABILITY, OR MAKE ANY OTHER WARRANTY, OR MAKE ANY OTHER WARRANTY IN CON-

NECTION WITH ANY PRODUCT WITHOUT MIMAKI'S PRIOR WRITTEN CONSENT.

THE SAME SHALL APPLY WHEN MIMAKI WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR FOR LOSS

OF PROFITS OF DEALER OR CUSTOMERS OF ANY PRODUCT.

Reproduction of this manual is strictly prohibited.

3

Safety Precautions

Symbols

In this document, symbols are used for explaining the contents of cautions on operation. The symbol to be displayed differs

depending on the caution content. Understand the meaning of each symbol and use this machine safely and correctly.

Examples of Symbols

Cautions on Installation

Meaning

WARNING

Failure to observe the instructions given with this symbol can result in death or seri-

ous injuries to personnel. Be sure to read it carefully and use the printer properly.

CAUTION

Failure to observe the instructions given with this symbol can result in minor or

medium injuries to personnel.

GENERAL WARNING

This symbol indicates that the items shown need to be noted. Specific notes are

drawn in the figure.

GENERAL MANDATORY

ACTION

This symbol indicates that the action shown must be executed. Specific instruction is

shown in the illustration.

GENERAL PROHIBITION

This symbol indicates that the action shown is prohibited. Specific action that is pro-

hibited is shown in the illustration.

IMPORTANT

Important notes for the use of this unit are given with this symbol. Refer to the opera-

tion.

HINT Useful information is given with this symbol. Refer to the operation.

REFERENCE

This symbol indicates the reference page for related contents. Click the text to dis-

play the corresponding page.

Caution

Do not install in the following locations

• A location exposed to direct sunlight.

• On an inclined surface.

• A location that vibrates.

• A location exposed to a direct air flow from an air con-

ditioner, etc.

• Around a location where fire is used.

• A location where the temperature or humidity

changes significantly. (The recommended usage

environment differs depending on the connected

printer. Confirm by referring to the operation manual

of the printer)

4

Warning for Use

Precautions

Warning

• The set of power cables provided with this machine is for use with this machine only, and cannot be used with other electri-

cal devices. Do not use any power cables other than the ones provided with the machine. Otherwise, it causes a fire and

the electric shock.

• Take care not to damage, break or work upon the power cable. If a heavy material is placed on the power cable, or if it is

heated or pulled, the power cable can break, thus resulting in fire or electric shocks.

• Use of the machine under an abnormal condition where it produces smoke or strange smell can result in fire or electric

shocks. If such an abnormality is found, be sure to turn off the power switch immediately and unplug the cable from the wall

outlet. Check first that the machine no longer produces smoke, and then contact your distributor or a sales office of MIMAKI

for repair. Never repair your machine by yourself since it is very dangerous for you to do so.

• Take care that no dust or dirt sticks to surface heaters. Dust sticking heaters can cause fire.

• Do not use extension cords. Otherwise, it causes a fire and the electric shock.

• Keep the power plug prong clear of any foreign object such as a piece of metal. Failure to do so may result in a fire or elec-

tric shocks.

• Do not plug too may leads into a single socket. Otherwise, it causes a fire and the electric shock.

• If the power cord is damaged, exposed core wire, disconnection, etc., contact your service representative for replacement.

If used as it is, it may cause fire or electric shock.

• Do not handle the power plug with wet hands. Doing so may result in electric shocks.

• Grasp by holding the plug itself when removing the power plug from wall outlet, and never hold by the cord. Holding and

pulling the cord may damage the cord, leading to fire or electric shocks.

• Don’t use the machine with the voltage other than the indicated one. Otherwise, it causes a fire and the electric shock.

• Don’t use the machine with the power frequency other than the indicated one. Otherwise, it causes a fire and the electric

shock.

• Do not place your fingers or other parts of your body close to the dangerous moving parts.

• If a foreign object such as a small piece of metal or a liquid such as water gets inside the machine, turn off the machine.

After that, be sure to unplug the power plug from the outlet and consult your service representative. If used as it is, it may

cause fire or electric shock.

• In case of ink leakage, turn off the main power, unplug the power plug and contact your local distributor, our sales office, or

service center.

• When moving the machine, contact our dealer or service representative.

• Do not use this machine in an area where children might be present.

• Don’t use the combustible spray or flammable solvent nearby or inside of this machine. Otherwise, it causes a fire and the

electric shock.

• Don’t put a vase, flowerpot, glass, cosmetics, medicine, container which water was in, or small metal thing in the top and

near this machine. When some spills over or enters inside of the machine, it causes a fire and the electric shock.

Prohibition of disassembly or modification Prohibition of use in a damp environment

• Never disassemble or modify the product. Doing so

may result in electric shocks or product breakdown.

• Avoid placing the product in a damp environment.

Donot splash water onto the product. Otherwise, fire,

electric shocks, or product breakdown may result.

Caution

Power supply

• Keep the breaker turned on at all times.

• Do not turn off the main power switch on the right side of this machine.

Handling of the power cable

• Connect to a polarized outlet.

• Be sure to connect it to a power outlet located near this unit so that it can be easily removed.

• Remove the rower plug from the wall outlet more than once a year and clean the peripheral parts between the plug blades.

Failure to do so may result in fire or electric shocks.

• Don’t use the machine with the voltage other than the indicated one.

• Check the voltage of the wall outlet and the capacity of the circuit breaker before you plug the power cords. Plug each

power cord to different outlet that has independent circuit breaker.

If you plug more than one power cord to wall outlets that share the same circuit breaker, the power may be cut off by the

breaker.

Heater

• Do not spill liquid on the Media Transfer Surface. This may cause failure of the heater or firing.

• Do not touch heaters with bare hand while it is hot. Otherwise, you can get burned.

5

Warning labels

Warning labels are stuck on the machine. Be sure to fully understand the warning given on the labels.

If a warning label is illegible due to stains or has come off, purchase a new one from a distributor or our sales office.

No. Order No. Label Description

1 M916035

Because there is a danger of elec-

tric shock etc., when turning off the

main power, turn off all power and

unplug the cable.

2 M907764

Because there is a possibility of

damage, do not ride or put any-

thing.

3 M903239

It is a high temperature part.

Do not touch the part.

4 M907935

There is a dangerous voltage

inside.

5 M912054

It is a moving part. Because there

is a possibility of danger by being

caught, keep your fingers or body

away from there.

5

3

2

1

4

5

【Left side】【Right side】

ὀࠉព

CAUTION

ATTENTION

ୖ㒊࡟஌ࡿ࡞

DO NOT STEP ON TOP

NE GRIMPEZ PAS DESSUS

6

Name of Each Part

Front side

Tension bar

Big

roll cover

OPT electrical box

Big roll shaft

Roll holder

Mini jumbo roll unit

Emergency

stop

switch

Big roll cover

Tension bar unit

Emergency stop switch

Main power

Clamp lever

Weight 200

(It is possible to set up

to 8 shafts at both

ends)

[Operation section]

JOG switch

Rotation direction

switch

7

Rear side

[Operation section]

JOG switch

Rotation direction switch

Emergency stop

switch

Clamp lever

Tension bar

Emergency stop switch

Folding bar

Air shaft

8

Combination of optional units

Mini jumbo roll unit and sub take-up unit

Sub feeding unit and big take-up unit

• For the combination above, weight 200 can not be used for mini jumbo roll unit. Remove it from the tension bar.

Sub take-up unit

Mini jumbo roll unit

Sub feeding unit

Big take-up unit

9

Mini jumbo roll unit and big take-up unit

Big take-up unit

Mini jumbo roll unit

10

Select / switch the unit to be used

1

Lower the clamp lever.

2

In local mode, press the key three times.

• The currently active unit is displayed.

3

Press the key to switch the unit to be used.

(1) Select the unit to be used on the feeding side.

(2) Select the unit to be used on the take-up side.

Mini jumbo roll unit x big take-up unit Mini jumbo roll unit x sub take-up unit Sub feeding unit x sub take-up unit

Sub feeding unit x big take-up unit Sub feeding unit x unused

• Execute the setup sequence only when necessary.

• When using the tension bar only on the feeding side, remove all weight 200’s on the feeding side.

＜ Display screen ＞

Setting 1

<< Start media detection

Post1 Post2 Option

35/35 35/35 60/60

○ ○ ○ ○ ○ ○ ○ ○

Menu Cleaning

F: Mini jumbo roll unit

T: Big take-up unit

[Func 2] -> unit change / set

F: Mini jumbo roll unit

T: Sub take-up unit

[Func 2] -> unit change / set

F: Sub feeding unit

T: Sub take-up unit

[Func 2] -> unit change / set

F: Sub feeding unit

T: Big take-up unit

[Func 2] -> unit change / set

F: Sub feeding unit

T: Do not use

[Func 2] -> unit change / set

Unit change / set

Use on the feeding side

Select a unit

Mini jumbo roll unit

Sub feeding unit

Unit change / set

Use on the take-up side

Select a unit

Big take-up unit

Sub take-up unit

Do not use

11

Set media

1

Turn on the power switch of OPT electrical box.

2

Turn on the main power switch of the printer.

3

Press the [POWER BUTTON] on the operation

panel.

• From the [Transport unit selection] screen, select the transport unit to be

used.

• Alternatively, press the key three times from the local screen

and change the unit to be used with the key.

• To set roll media, work with three or more people.

• Use a media lifter with a load capacity of 315 kg or more for the roll media set.

• An air compressor is required for the roll media set. (Discharge pressure 0.5 MPa recommended)

When using mini jumbo roll unit

and big take-up unit

Feeding & Take-

up

When using only mini jumbo roll unit Feeding only

When using only the big take-up unit Take-up only

When neither is used Off

• When using an extended heater, turn off the power of extended

heater, or lower its temperature. If the temperature of the

extended heater is high, media may be wrinkled or left and

right difference may occur, affecting the media set.

OPT electrical box

＜ Display screen ＞

Transport unit selection

○

Feeding & Take-up

○

Feeding only >

○

Take-up only >

○

Off

Menu

TEST PRINT /

CLEANING

12

4

Set the media on the air shaft.

(1) Rotate the air shaft with the [FUNC2] key to make the air shaft insertion

port upward.

(2) Tilt the shaft fixing.

(3) Remove the air shaft.

(4) Pass the air shaft through the media.

(5) Adjust the position of the air shaft, fix the media by inserting air into the

air shaft with the attached Air Nozzle.

• When the media is set on the machine itself, the [FUNC 2] key

is invalid.

• Before tilting the shaft fixing, always make sure that the air

shaft insertion port faces upward.

• When the power is off, the shaft will not rotate.

• Be careful not to pinch your hands and fingers when applying

force when moving the shaft fixing.

• The shaft fixing is set heavier for safety reason. Use plastic

hammer etc. when it is difficult to move.

• Set so that the scale on both ends of the air shaft has the same

value.

• If the air is insufficient, the media runs idle and transport failure

occurs.

＜ Display screen ＞

To the feeding unit,

set the media.

Completed [ENT]

Shaft fixing

Air shaft

Media

[When entering Air]

[When discharging Air]

Air Nozzle

0 1 2 3 4 5 6 7 8 10111213141516171819209

[Set position of media]

Scale

13

(6) Move the media to the shaft fixing position.

(7) Lower the media and fix the shaft.

• Be sure to fix the shaft securely. Rotating the media without fix-

ing may cause the air shaft to come off and it is dangerous.

• Be careful not to pinch your hands and fingers when applying

force when moving the shaft fixing.

• The shaft fixing is set heavier for safety reason. Use plastic

hammer etc. when it is difficult to move.

14

5

Pass media through the printer.

(1) Rotate the media with the tension bar raised.

• Feed the media with the JOG switch.

• Change the direction of rotation with the rotation direction switch.

(2) Raise the clamp lever.

(3) Pass the media over the platen.

(4) Lower the clamp lever and temporarily press the media.

6

Raise the clamp lever on the front of the printer.

• If weight 200 is added to the tension bar on the mini jumbo

side, remove it when passing the media.

Media path

Tension bar

Clamp lever

Rotation direction

JOG switch

＜ Display screen ＞

To the feeding unit,

set the media.

Completed [ENT]

JOG switch

Rotation direction switch

15

7

Pull the media lightly by hand to remove wrinkles

on the surface, and lower the clamp lever.

8

Lower the tension bar on the mini jumbo side.

• Continue feeding the media with the mini jumbo JOG switch until theten-

sion bar lowers to the bottom.

9

Press the key.

• The tension bar is automatically initialized.

• Pressing the [FUNC1] key sets to the [Stay Mode]. You can

prevent the air shaft from rotating when pulling out the media.

• Put the tension bar with your hands down.

If you release the stopper without attaching a hand, the tension

bar falls and it is dangerous.

• In case of dropping it, the weight shaft (horizontal shaft) comes

loose. Firmly tighten with a coin or flat head screwdriver. If it is

used with looseness, the weight shaft may be deformed or

damaged.

[Feeding tension bar] When an error occurs:

• Lower the tension bar to the bottom with the JOG switch and

retry.

• Be careful not to slack the media too much when retrying.

Clamp lever

Stopper

Weight shaft

Feeding unit

Please wait

＜ Display screen ＞

To the feeding unit,

set the media.

Completed [ENT]

16

10

Press the key.

• The tension bar moves.

11

Move sub take-up unit to both ends.

12

Pass an empty paper core through the big roll

shaft.

(1) Big roll shaft.

• For detailed instructions, refer to “P.21 "How to remove the big

roll axis"”.

• Touch the place marked ○ in the figure below to confirm the

tension of the media on the feeding side. If the tension of the

media is not uniform or there is a difference between left and

right media, set the media again.

• If the media is not dry enough, the media edge on the take-up

side may be displaced. The roll winds down partially and the

media may interfere with the extended heater. In that case,

raise the temperature of the extended heater.

• Remove it when the paper core is attached to the sub take-up.

The media is stretched

to the left and right

One side of the media is

sagging

Good

No good

Sub take-up unit

＜ Display screen ＞

To the take-up unit,

set the media.

Completed [ENT]

JOG feed

17

(2) Pass a paper core through the big roll shaft.

(3) Pass the roll holder through the big roll shaft and set at both ends of the

paper core.

(4) After setting the big roll shaft, close the big roll cover.

13

Fix the paper core to the big roll shaft.

(1) Push the roll holder into the paper core.

(2) Move the paper core so that the paper core and the center of the media

overlap.

(3) Turn the clamp lever of the roll holder and fix it to the big roll shaft.

(4) Turn the handle of the roll holder and lock the paper core.

• Approximate tightening is about 3 scales after the roll holder

hits the paper core.

14

Raise the tension bar on the big roll shaft side.

• Set the paper core so that you cannot see the green scale of

the roll holder completely.

• If tightening is weak, there is a risk of loosening and taking-up

failure occurring during printing.

• If weight 200 is added to the tension bar on the mini jumbo

side, remove it when passing the media.

paper core

Roll holder

Turn it to this point

Big roll cover

paper core

Big roll

cover

Clamp lever

Roll holder

Handle

18

15

Press the key to feed the media.

• Feed the media that can be wrapped around the paper core.

16

Fix the media to the big roll shaft.

(1) Fix the center of the media with adhesive tape.

(2) Similarly fix the left and right sides of the media.

17

Feed the media and take-up it for 2 to 3 turns

around the paper core.

(1) Press the key to slack the media.

• When using an extended heater, place the extended heater

down and pass the media over the platen cover and the

extended heater. (Recommendation)

• When using an extended heater, turn off the power of extended

heater, or lower its temperature. If the temperature of the

extended heater is high, media may be wrinkled or left and

right difference may occur, affecting the media set.

• When touching the extended heater, make sure the extended

heater to cool down enough before touching it.

• Pull the media evenly to the left and right, check that there is

no slack or wrinkle, and paste the tape.

• It is recommended that the taking-up direction of the media is

inward (the printed side is inside).

Rotation direction switch

JOG switch

19

(2) Set the rotation direction switch in the direction to take-up, and press and hold the JOG switch.

(3) Repeat (1) and (2) until taking-up three turns on the paper core.

18

Lower the tension bar on the big roll shaft side.

19

Press the key.

• The tension bar is automatically initialized.

• Check that the shift does not occur on the media edge of the

media.

• Lower the tension bar with your hands attached.

If you release the stopper without attaching a hand, the tension

bar falls and it is dangerous.

• In case of dropping it, the weight shaft (horizontal shaft) comes

loose. Firmly tighten with a coin or flat head screwdriver. If it is

used with looseness, the weight shaft may be deformed or

damaged.

[Take-up tension bar] When an error occurs:

• Lower the tension bar to the bottom with the JOG switch and

retry.

• Be careful not to slack the media too much when retrying.

• Do not operate the clamp lever after setting the media. It will

cause slack and wrinkles.

JOG switch

Rotation direction switch

【Inward】【Outward】

To the take-up unit,

set the media.

Completed [ENT]

JOG feed

Take-up unit

Please wait

20

Press the key.

• The tension bar moves.

• Touch the place marked ○ in the figure below to confirm the

tension of the media on the take-up side. If the tension of the

media is not uniform or there is a difference between left and

right, set the media again.

• If the media is not dry enough, the media edge on the take-up

side may be displaced. The roll winds down partially and the

media may interfere with the extended heater. In that case,

raise the temperature of the extended heater.

• Be sure to check the remaining amount of ink and the amount of waste ink before starting printing. If ink runs short or the

waste ink tank fills up, printing stops halfway.

• Printing stops when the media diameter taken-up by the big roll unit exceeds 280 mm. Replace the paper core with a new one.

(When using dia. 600 mm media, it is necessary to replace approximately 2 to 4 times)

• The paper core is a consumable item. Recommend to prepare enough. For paper cores, contact your dealer, our sales office

or call center.

The media is stretched

to the left and right

One side of the media is

sagging

Good

No good

ページが読み込まれています...

MIMAKI TS55-1800 取扱説明書

MIMAKI TS55-1800 取扱説明書

他の言語で

関連論文

その他のドキュメント