ESC Information/电调说明
1.The ESC included with the model has a safe start.If the motor battery is
connected to the ESC and the throttle stick is not in the low throttle or off
position,the motor will not start untill the throttle stick is moved to the low
throttle or off position.Once the throttle stick is moved to the low throttle or
off position,the motor will emit a series of beeps.the motor is now armed and
will start when the throttle is moeved.make sure receiver is bind to the radio,
turn on the radio, set throttle stick to the maximum.
2.Power on the ESC(The ESC must connect to the motor and Receiver).
The motor will emit a series of beeps, after the beeps, set the the throttle
stick the the minimum, the motor will emit a series beep again. now the ESC
calibration is done.
8
VTX Uermanual/图传说明书
VTX Specs/图传参数
Voltage input/电压输⼊范围: 2~6S Lipo
Frequency/频率:5.3~5.9Ghz
Power/功率: 200/800/1500mw Switchable
Power consumption/功耗: 9V 1.1A
