▎Click the button S
for preset modes
▎Click the button M
for custom mode
This comes with three curing time settings:
5 min, 10 min, 20 min.
Click on the up and down keys to increase
or decrease 1 minute each time. Long
press the keys to quickly increase or
decrease the minutes.
To Set Curing Time
02
▎Turn on the device ▎Turn off the device
Connect the power cable. Press the
Power button to turn on the device.
Long press the Power button. The curing
lamp will turn off after a beep sound.
Power Supply & Light Switch
01
Please follow Phrozen’s social media accounts and subscribe to our YouTube channel to learn more about printing tips and share ideas with one another.
Feel free to contact us if you have any questions.
Close the UV lamp cover. Click on the
Power button. The curing lamp will begin
operation.
How to Operate
the UV Curing Lamp
03
The UV lamp cover needs to fit all four
sides of the base perfectly for the device
to begin operating.
Do not stare at the UV curing lights
without closing the UV lamp cover, this
may cause damage to your eyes.
Warning
UV Curing Lamp User Guide
This appliance can be used by children aged 8 and above as well as by persons
with reduced physical, sensory, or mental capabilities, if supervised or given
instruction regarding the use of the appliance in a safe way, to ensure that the
hazards involved are understood. Children are NOT allowed to play with the
appliance.
Children are NOT allowed to clean or provide maintenance without adult
supervision.
Standard Maintenance Procedure
Please use sanitizing alcohol to clean the outside of your device.Do not use any
oily or corrosive liquids or to clean the device.