Please follow Phrozen’s social media accounts and subscribe to our YouTube channel to learn more about printing tips and share ideas with one another.
Feel free to contact us if you have any questions.
Warning
This appliance can be used by children aged 8 and above as well as by persons
with reduced physical, sensory, or mental capabilities, if supervised or given
instruction regarding the use of the appliance in a safe way, to ensure that the
hazards involved are understood. Children are NOT allowed to play with the
appliance.
Children are NOT allowed to clean or provide device maintenance without adult
supervision.
Standard Maintenance Procedure
Please use sanitizing alcohol to clean the outside of your device. Do not use any
oily or corrosive liquids to clean the device.
UV Curing Lamp User Guide
▎Plug in the power cable ▎Connect cable to electrical outlet
Connect the power cable to the device. Once the power cable has been plugged
in, the device will turn on immediately. To
turn off the device, please plug out the
power cable.
Power Supply & Light Switch
01
▎For Preset Curing Mode ▎For Custom Curing Mode
This comes with three curing time settings:
10 min, 30 min, 60 min.
Click on the up and down keys to increase
or decrease time by 1 minute. Long press
the keys to quickly increase or decrease
the minutes.
Set Curing Time
02
Close the UV lamp cover. Click on the
Power button. The curing lamp will begin
operation.
How to Operate
the UV Curing Lamp
03
The UV lamp needs to be closed
completely for the device to begin
operation.
Do not stare at the UV curing lights
without closing the UV lamp as this may
cause damage to your eyes.
