Sony XAV-77 取扱説明書

3-254-400-11(1)

XAV-77

Media Center/

Receiver

Operating Instructions

GB

CT

For installation and connections, see the supplied Installation/Connections manual.

2

3

Table of Contents

Features .................................................................................................................... 4

Precautions ............................................................................................................... 5

Getting Started

Preparations ............................................................................................................. 6

Location of Controls ................................................................................................ 8

Basic Operation

Listening to Radio or CD/MD/”MG Memory Stick”............................................. 10

Watching TV/Other Video Components................................................................ 12

Setting a Security Code......................................................................................... 14

Setting the Clock.................................................................................................... 16

Advanced Operation

FM/AM Reception

Reading the monitor and display

window......................................................17

Storing stations automatically

— Best Tuning Memory (BTM) ..............19

Storing stations manually ..........................21

Assigning a name to a station

(Station Memo) .........................................22

Searching for a station by name (List) ......24

CD/MD/”MG Memory Stick” Playback

Reading the monitor and display

window......................................................25

Repeat playback ..........................................27

Shuffle playback ..........................................28

Labeling a CD - Disc Memo (CD unit with

the CUSTOM FILE function)..................29

Locating a disc by name (List)................... 31

TV/Other Video Components

Storing channels ..........................................32

Selecting the screen mode ..........................33

Sound Settings

Dynamic Soundstage Organizer (DSO) ...34

Using the equalizer (EQ7) ..........................35

Adjusting the sound characteristics

(BAS/TRE/BAL/FAD/SUB) .................37

Setting the low-pass filter (LPF) ................38

Setting the high-pass filter (HPF)..............39

Setting the sound level for connected AUX

components...............................................40

Other Functions

Sound and display settings ........................41

Using the rotary commander..................... 44

Other Features

Additional Information

Card remote commander precautions......46

About the liquid crystal display (LCD)

panel .......................................................... 46

Replacing the lithium battery .................... 46

If movement of the monitor has been

impeded during the monitor setting.....47

Dismounting the unit..................................47

Troubleshooting................................... 49

Specifications ....................................... 52

4

Features

Welcome!

Thank you for purchasing this Sony Media Center/Receiver. Before operating the unit,

please read this manual thoroughly and retain it for future reference.

7-inch in-dash motorized TFT monitor

Innovative in-dash monitor design allows the unit to be mounted in a single DIN slot. At

the touch of a button, a 7-inch wide-aspect-ratio screen slides out, for comfortable TV or

DVD viewing. (Sony TV tuner unit and DVD changer are optionally available.)

Sony bus control and FM/AM tuner

The built-in FM/AM tuner as well as an optional Sony CD/MD changer and MG Memory

Stick system-up player can be conveniently operated from the unit. The XAV-77 is the ideal

centerpiece for a sophisticated car audio/video system.

Built-in amp with 45 watts × 4

In spite of its compact size, the XAV-77 has 4 powerful amplifier channels delivering 45

watts each, for effortless music reproduction.

DSO creates a virtual soundstage

The DSO (Dynamic Soundstage Organizer) developed by Sony improves the listening

experience by creating a soundstage with “virtual speakers”. These are located right out

front, not buried in the lower part of the doors. The result is clearer, more transparent

sound.

EQ7 frequency curves

7 preprogrammed equalizer curves for various types of music can be selected at the press

of a button. In addition, you can fine-tune each curve by adjusting the signal level in 7

frequency bands, to create your very own sound.

2 A/V inputs and 1 rear monitor output

Additional to optional TV tuner unit, up to 2 optional A/V devices can be connected

simultaneously.

5

Precautions

To avoid the risk of injury or accident, read

the following precautions before installing

and operating the unit.

On safety

Comply with the Traffic Laws in your

country.

•

While driving

–You must not watch or operate the monitor. It

may lead to distraction and cause an accident.

Park your car in a safe place to watch the

monitor and operate the unit.

•

While operating

– Do not insert your hands, fingers or foreign object

into the unit while the monitor is functioning. It

may cause injury or damage to the unit.

– Keep small articles out of the reach of children.

•

If your car was parked in direct sunlight resulting

in a considerable rise in temperature inside the car,

allow the unit to cool off before operating it.

Watching TV/video pictures

The TV/video pictures appear only after

you park the car and set the parking brake.

When the car starts moving, the TV/video

pictures automatically disappear after

displaying the following caution.

PICTURE OFF

FOR

YOUR SAFETY

Do not operate equipment connected to

the TV tuner unit or watch the monitor

while driving.

On installation

•

We recommend this unit should be installed by a

qualified technician or service personnel

– If you try to install this unit by yourself, refer to

the supplied “Installation/Connections” manual

and read it carefully. Make sure to install this

unit properly.

– Improper installation may cause battery drain or

a short circuit.

•

If the unit does not work properly, check the

connections first (refer to the supplied

“Installation/Connections” manual). If everything

in order, check the fuse.

•

Replacing the fuse

– When replacing the fuse, be sure to use only a

fuse of the same rating (ampere rating).

5

– Using a different fuse or bridging the contacts

with wire can lead to serious damage.

•

Protect unit surface from damage

– Do not expose the unit surface to chemicals such

as insecticide, hair spray, insect repellent, etc.

– Do not leave rubber or plastic materials in

contact with the unit for a long time. Otherwise

the finish of the unit may be impaired, or

deformation may occur.

•

When installing, be sure to turn the ignition key to

off position. If the ignition is on and try to install

this unit may cause battery drain or a short circuit.

•

When installing, be sure not to damage any car

parts such as pipes, tubes, fuel tank or wiring by

using a drill. It can cause a fire or an accident.

•

Moisture condensation

If the ambient temperature of the unit changes

rapidly, moisture condensation may occur inside

the display window. Simply wait for a while, until

the moisture evaporates and the unit returns to

normal.

Installing location

•

Do not install this unit where:

– the driver’s view will be obstructed when the

monitor is in either open or close position.

– the operation of the car or the airbag system will

be obstructed.

– It will obstruct the operation of the vehicle,

especially the steering wheel, shift lever or brake

pedal.

If you have any questions or problems concerning

your unit, please consult your nearest Sony dealer.

Fuse

6

Preparations

Resetting the unit

Before operating the unit for the first time, or after

replacing the car battery or changing the connections, you

must reset the unit.

Use a pointed object such as a ball point pen to push the

Reset button. To avoid the possibility of damage, you

should not use a needle or push the button too strongly.

Push Reset

R

ese

t

bu

tt

on

DI

SC

SEEK

SOURCE MODE AT T

OFF

OPEN/

CLOSE

.>

VOL

Opening up the monitor

Press OPEN/CLOSE on the monitor.

O

PEN

/C

L

OS

E

The monitor slides out of the main unit, and the picture

comes on.

Notes

• When the Reset button is pushed, the

time and all stored settings are lost and

will have to be reprogrammed.

• The reset procedure takes about 10

seconds after the Reset button is

pushed.

• When the reset procedure is completed,

press OPEN/CLOSE and verify that

the monitor opens up properly.

Notes

• The card remote commander cannot be

used for opening up or closing the

monitor.

• If movement of the monitor during

opening or closing has been impeded

by the gear shift lever or another

obstacle, see “If movement of the

monitor has been impeded during the

monitor setting” (page 47).

Getting Started

7

Adjusting the monitor angle

You can adjust the angle of the monitor for best viewing.

Press ANGLE –/+ repeatedly.

The buttons adjust monitor position in discrete steps.

AN

G

LE

–

/+

–

+ button: Monitor is tilted backward.

– button: Monitor is tilted forward.

The adjustment is memorized, and the monitor will move

to the same angle the next time it is opened up again after

having been closed.

Closing the monitor

Press OPEN/CLOSE.

The monitor retracts into the unit, and you can use only the

audio functions of the unit.

O

PEN

/C

L

OS

E

O

FF

Shutting down

• If you press OFF on the card remote commander while

the monitor is opened up, the sound is turned off, and

the unit switches to the standby mode, in which only the

clock indication is shown.

• If you set the ignition key of the car to OFF, power to the

unit is automatically turned off.*

Note

Do not move the monitor by hand.

* Warning when installing in a car

without an ACC (accessory) position

on the ignition key

After turning off the ignition, be sure to

hold down OFF on the unit until the

display disappears.

Otherwise, the clock display does not

turn off and this causes battery drain.

To turn on the unit when it is turned

off, press SOURCE on the unit. (You

cannot turn on the unit with the card

remote commander.)

Notes

• When the monitor is closed, MENU,

LIST, and ENTER on the card remote

commander cannot be used.

• If movement of the monitor during

opening or closing has been impeded

by the gear shift lever or another

obstacle, see “If movement of the

monitor has been impeded during the

monitor setting” (page 47).

• If OPEN/CLOSE was pressed while

the monitor was opening or closing,

the monitor may not stop at the

original angle. In such a case, press

ANGLE –/+ to adjust the angle.

8

Location of Controls

Main unit

Monitor closed

1

3

2

4

5

6

7

8

9

0

qa

q

1 DISC –/+ buttons

2 Reset button

3 Sensor for card remote commander

4 VOL (volume adjust) –/+ buttons

5 SEEK/AMS –/+ buttons

1 ANGLE (monitor angle adjust) –/+ buttons

2 Sensor for card remote commander

6 Display window

7 OFF (Standby/Power off) button*

8 OPEN/CLOSE button

9 ATT button

0 MODE button

qa SOURCE (Power on/Radio/CD/MD/VIDEO or TV)

button

Monitor opened up

1

2

* Warning when installing in a car without an ACC (accessory) position on the ignition key

After turning off the ignition, be sure to hold down OFF on the unit until the display disappears.

Otherwise, the clock display does not turn off and this causes battery drain.

9

Card remote commander

The unit can be operated with the card remote commander.

1

2

3

4

5

6

7

8

9

0

q

a

q

d

q

s

q

f

q

g

1 DSPL (display mode change) button

2 Number buttons

3 DSO button

4 MENU button

5 SOURCE (Power on/Radio/CD/MD/VIDEO/TV)

button

6 B/b SEEK/AMS –/+ buttons

7 SOUND button

8 OFF (Standby/Power off) button

9 VOL (volume adjust) +/– buttons

0 EQ7 button

qa MODE button

qs LIST button

qd V/v DISC +/– buttons

qf ENTER button

qg ATT button

Note

If the unit is turned off by holding down OFF, it cannot be operated with the card remote commander unless SOURCE

on the unit is pressed to activate the unit first.

Tip

See “Replacing the lithium battery” for details on how to replace the battery (page 46).

10

Listening to Radio or CD/MD/”MG Memory Stick”

Basic Operation

Listening to the radio

3 Select desired station.

Using auto tuning

Press SEEK/AMS –/+ lightly until the desired station is received.

Using manual tuning

For details, see “Storing stations manually” (page 21).

O

P

E

N

/

C

L

O

SE

A

T

2 Select desired band.

With each press of MODE, the selection is switched in the

order: FM1 t FM2 t FM3 t AM1 t AM2.

Tip

The power antenna will extend automatically while you select the radio reception.

Note

Listening to radio or CD/MD/”MG Memory Stick” is

possible regardless of the monitor setting (opened or

closed).

1 Select tuner.

With each press of SOURCE, the selection is switched in the order:

FM/AM t CD* t MD*/MS* t TV*.

*

Displayed only if respective optional component is connected.

11

O

P

E

N

/

C

L

O

SE

A

T

Listening to CD/MD/”MG

Memory Stick”

Preparation: To listen to CDs, MDs, or “MG Memory

Sticks” on this unit, an optional Sony CD/MD changer

and/or MG Memory Stick system-up player must be

connected to the connection box.

1 Select CD, MD, or MS.

With each press of the SOURCE button, the selection is switched in the order:

FM/AM t CD* t MD*/MS* t TV*.

*

Displayed only if respective optional component is connected.

3 Select a

disc.

Press V or v on

the card remote

commander to

select a disc

(page 9).

Adjust volume

2 Select changer.

With each press of the MODE button, the

selection is switched in the order:

CD: CD1 t CD2 t CD3 t ...

MD: MD1 t MD2 t MD3 t ...

Locating a desired spot (manual search)

Hold down SEEK/AMS –/+ and release it at the desired spot.

Locating the start of a track

(Automatic Music Sensor [AMS])

Press SEEK/AMS –/+ lightly once for each track you want to skip.

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press SOURCE to select “MS” or “MD.” If “MS” appears in the source display,

MGS-X1 starts to play. If “MD” appears in the source display, press MODE to select “MS”, to start playback.

• When you want to play an MD unit, press SOURCE to select “MD” or “MS.” If your desired MD unit appears in the

source display, it starts to play. If “MS” or another MD unit appears in the source display, press MODE to select

your desired MD unit, to start playback.

12

Watching TV/Other Video Components

Watching TV

Preparation: To view TV programs on this unit, an

optional Sony TV tuner unit must be connected to the

connection box.

1 Open up the monitor (page 6).

D

IS

C

SO

U

R

CE

SE

E

K

MODE

A

T

OF

F

OPEN/

CLOSE

.

>

VOL

2 Select TV1 or TV2.

With each press of SOURCE, the selection is switched in the order:

FM/AM t CD* t MD*/MS* t TV*.

Pressing MODE when “TV” is selected switches the selection in the order:

TV1* t TV2* t VIDEO1 t VIDEO2.

*

Displayed only if respective optional component is connected.

3 Select a channel.

Using auto tuning

Press SEEK/AMS –/+ lightly until the desired channel is

received.

Open up/Close the

monitor

Adjust volume

13

1 Open up the monitor (page 6).

2 Select VIDEO1 or VIDEO2.

With each press of SOURCE, the selection is switched in the order:

FM1 t CD* t MD*/MS* t TV*.

Pressing MODE when “TV” is selected switches the selection in the order:

TV1* t TV2* t VIDEO1 t VIDEO2.

*

Displayed only if respective optional component is connected.

ANG

LE

O

P

E

N

/

CL

O

SE

E

K

E

A

T

.

VOL

Watching other video

components

Preparation: To view other video sources on this unit,

optional video components must be connected to the

connection box.

D

IS

C

SO

U

R

CE

SE

E

K

MODE

A

T

OF

F

OPEN/

CLOSE

.

>

VOL

14

Setting a Security Code

By setting a security code (password consisting of a 4-digit

number), you can prevent use of the unit by persons other

than the owner.

To set a security code

Follow the steps below with the card remote commander

while the monitor is open.

1

Press MENU.

2

Press V or v to select “Code Edit”.

C ode Edi t

3

Press ENTER.

C ode Edi t

Code :

4

Press V or v to select a numeral.

5

Press b to move to the next digit.

6

Repeat steps 4 - 5 until all digits are input.

7

Press ENTER.

C ode Edi t

Yes :No

8

While the indication “Yes” is flashing, press

ENTER.

The security code is now set. When a security code is set, an

indication requesting input of the security code appears on

the display window when the unit is connected to the

battery after having been disconnected from the battery for a

long period of time.

Note

The security code input function operates

only when the unit is turned on after the

unit was disconnected from battery and

any electrical charge remaining in the

unit has been completely dissipated.

If the unit is turned on again after a brief

interval while there is still a remaining

charge, the normal clock indication will

be shown and security code input is not

required.

ENTER

MEN

U

V/v

B/b

15

To delete the security code

In step 2 on “To set a security code”, select “Code Delete”

and then proceed the remaining steps until step 7.

Entering the security code

When a security code is set, an indication requesting input

of the security code appears on the display window when

the unit is connected to the battery after having been

disconnected from the battery for a long period of time (see

“Note” on the preceding page). Input the code with the

card remote commander as follows.

1

Press V or v to select a number.

2

Press b to move to the next digit.

3

Repeat steps 1 - 2 until all digits are input.

4

Press ENTER.

The clock indication now appears on the display window.

Tip

If the entered security code is not correct,

the indication “CODE ERR” flashes* and

the unit returns to the input standby

condition.

* “Code Error” flashes on the monitor

when the monitor is open.

Note

The security code is not erased also when

the Reset button is pressed.

16

Setting the Clock

This unit uses 12-hour time indication.

To set the clock, use the card remote commander while the

monitor is open.

1

Press MENU.

Press V or v to select “Clock”.

Clock

2

Press ENTER.

Clock

1:00

1 Press V or v to set the hours.

2 Press b to move to the minutes, and press V or v to set

the minutes.

V: increases the value

v: decreases the value

3

Press ENTER.

The regular display appears again.

ENTER

MEN

U

V/v

B/b

Tip

When “Dual Information” is set to “on”,

the time is always displayed (page 41).

17

Reading the monitor and display

window

Information on the selected source is shown on the monitor

or display window (when monitor is closed).

Monitor indication during radio reception

New

Age

1 0:30

DSO EQ7

M1F

AIONTST

ST

LOUD

No.

6977MHz

.

1

4

5

6

7

23

1 Source type and frequency band

2 Preset number (1 - 6)

3 Frequency

4 Station memo (name of station, etc.)

Notes

• Up to 8 characters. (Only upper-case characters are available.)

• “••••••••” appears when no name assigned.

5 Pictograms

Various settings are shown as pictograms.

Example)

ST: Stereo reception

LOUD: “Loudness” is set to “on”

6 Graphics display

Normally, the current settings for DSO (page 34) and EQ7

(page 35) are shown here.

Pressing LIST on the card remote commander brings up a list

of stored stations (page 24).

While setting the equalizer curve, the graphic equalizer is

shown (page 36).

7 Clock indication

When “Dual Information” is set to “on”, the time is also

shown (page 41).

FM/AM Reception

Standby mode

When the unit is in standby mode with

only the clock indication shown, pressing

SOURCE shows the selected source on

the monitor or the display window.

Note

When the monitor is open, DSPL on the

card remote commander cannot be used

during radio reception.

Advanced Operation

continue to next page t

18

FM/AM Reception

Display window indication during radio reception

12 3

1 Source type and frequency band

2 Preset number (1 - 6)

3 Frequency/clock/ATT status/station name

When “Dual Information” is set to “on”, the time is

shown here (page 41).

“ATT” is shown constantly while attenuation is on.

By pressing the following buttons on the card remote

commander, the corresponding information can be called

up in fields 1 - 3.

DSPL: Displays the name stored by the Station Memo function

(page 22).

DSO: Displays the virtual speakers setting by the DSO (Dynamic

Soundstage Organizer) function (page 34).

The setting changes with each press of the button.

EQ7: Displays the preprogrammed equalizer curve setting by the

EQ7 function (page 35).

The setting changes with each press of the button.

SOUND: Displays the sound characteristics (bass, treble, balance,

fader and subwoofer) settings (page 37).

The displayed setting item changes with each press of the

button, and B or b can be used to change the setting.

Notes

The following information is not shown

on the display window:

• List display

• Menu display

19

Storing stations automatically — Best

Tuning Memory (BTM)

You can have the unit automatically select stations with the

strongest signals in the selected band and store these in the

order of their frequency. 6 stations each can be stored in the

FM1, FM2, FM3, AM1, and AM2 bands, resulting in a total

of 18 FM stations and 12 AM stations.

Follow the steps below with the card remote commander

while the monitor is open.

1

Press SOURCE to switch to radio reception.

2

Press MODE to select the frequency band in

which you want to store stations.

With each press of the button, the unit cycles through the

bands in the following order:

FM1 t FM2 t FM3 t AM1 t AM2

3

Press MENU.

4

Press V or v to select “BTM” (Best Tuning

Memory).

BTM

5

Press ENTER.

“BTM” flashes, and strong stations in the selected band are

memorized in the order of their frequency.

When the storing process is completed, the regular display

appears again.

ENTER

MEN

U

M

O

D

E

SO

UR

CE

V/v

B/b

1-

6

Notes

• When there are not enough broadcast

stations or when the signal is weak,

automatic storing may not be

performed.

• When a preset station number is shown

on the monitor, stations will be stored

in subsequent numbers.

continue to next page t

20

FM/AM Reception

To listen to stored stations

In radio reception, press the number buttons

or V and v to select the desired station.

When you cannot receive stored

stations, such as when driving in a

different area

Lightly press B or b. The unit automatically

searches for a station and stops when one is

found. Continue this process until you have

found a station you want to listen to.

If the station search stops very often, you can

restrict the search to strong stations only, by

selecting the local mode as follows.

Follow the steps below with the card remote

commander while the monitor is open.

1

Press MENU in radio reception.

2

Press V or v to select “Local Seek”.

3

Press b to select “on”, and press

ENTER.

You can now search for local stations by

lightly pressing B or b.

To return to normal reception

Select “off” in step 3.

When there is noise during stereo

reception

Selecting mono reception as follows may

improve the sound.

Follow the steps below with the card remote

commander while the monitor is open.

1

Press MENU in FM radio reception.

2

Press V or v to select “Mono”.

3

Press b to select “on”, and press

ENTER.

To return to normal reception

Select “off” in step 3.

Automatically adjusting reception

bandwidth (IF Auto mode)

When reception conditions deteriorate while

listening to a stereo broadcast, automatic

bandwidth limiting may result in a switch to

mono. You can enable stereo reception also

under such conditions.

Follow the steps below with the card remote

commander while the monitor is open.

1

Press MENU in FM radio reception.

2

Press V or v to select “IF”.

3

Press b to select “Wide”, and press

ENTER.

Note

When “IF Auto” is set to “Wide”, there may be increased

noise during reception.

ページが読み込まれています...

Sony XAV-77 取扱説明書

Sony XAV-77 取扱説明書

他の言語で

関連論文

その他のドキュメント