Kenwood Car Satellite Radio System KCA-R71FM ユーザーマニュアル

カテゴリー
車のビデオシステム
タイプ
ユーザーマニュアル

このマニュアルも適しています

KCA-R71FM
© B64-2780-00/01 (K/M)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you
obtain the best performance from your digital radio controller.
For your records
Record the serial number, found on the back of the unit, in the spaces desig-
nated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for
information or service on the product.
Model KCA-R71FM Serial number
FM MODULATOR SYSTEM
INSTRUCTION MANUAL
SYSTEME A MODULATION DE FREQUENCE
MODE D’EMPLOI
SISTEMA DE MODULADOR FM
MANUAL DE INSTRUCCIONES
FM 調頻系統
使用說明書
04.2.27, 10:49 AMPage 1
— 2 —
English
Contents
Before use
Safety Precautions ........................................................................3
General features
Power............................................................................................5
Switching Modes ..........................................................................5
Sirius satellite radio tuner features
Selecting Sirius Mode...................................................................6
Switching Seek Mode...................................................................6
Selecting the Preset Band ............................................................6
Select the channel ........................................................................7
Channel Preset Memory...............................................................7
Preset Tuning ................................................................................7
Channel Scan ................................................................................7
Channel Search............................................................................7
Direct Access Tuning ....................................................................8
Switching Display..........................................................................8
Disc control features
Playing Disc...................................................................................9
Fast Fowarding and Reversing .....................................................9
Track Search..................................................................................9
Disc Search .................................................................................10
Direct Track Search .....................................................................10
Direct Disc Search ......................................................................10
Track/Disc Repeat .......................................................................10
Track Scan ...................................................................................10
Random Play ...............................................................................10
Magazine Random Play...............................................................11
Folder Search ..............................................................................11
Text/Title Scroll ............................................................................11
Switching Display........................................................................11
Menu system
Menu system..............................................................................12
Changing the Transmission Frequency .......................................13
Modulation level..........................................................................13
Dynamic control ..........................................................................13
Text Scroll....................................................................................13
Sirius ID (ESN).............................................................................14
Basic Operations of remote.............................................15
Installation
Accessories.................................................................................17
Installation Procedure .................................................................17
Connecting Wires to Terminals...................................................18
Installation...................................................................................20
Troubleshooting guide........................................................21
Specifications .........................................................................25
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 2
Reset button
— 3 —
Take the following precautions to
prevent fire and avoid personal injury:
When extending the ignition wire, battery
wire, or ground wire, use 0.75mm
2
(AWG18)
or larger automotive grade wire to avoid wire
deterioration or damage to the covering.
Check that no metal objects (coins, tools,
etc.) are left inside the unit to avoid short
circuits.
If you smell or see smoke, turn the power
off immediately and consult your Kenwood
dealer.
Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.
Take the following precautions to
keep the unit in proper working order.
Be sure the unit is connected to a 12V DC
power supply with a negative ground
connection.
Do not open the top or bottom cover.
Do not install the unit in places it is exposed
to direct sunlight, high heat or humidity,
water may splash over it, or dust exists.
2CAUTION
2WARNING
IMPORTANT INFORMATION
About the disc changer to be
connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to "N".
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
You can damage both your unit and the CD
changer if you connect them incorrectly.
Precautions when connecting disc changers
released in 1997 or earlier.
The optional switching adapter KCA-S210A is
necessary to connect a disc changer that is
not equipped with the "O-N" switch except
KDC-C100, KDC-C302, C205 and C705.
Cleaning the Unit
If the front panel gets dirty, turn off the
power and wipe the panel with a dry silicon
cloth or soft cloth.
Do not use hard cloths or paint thinner,
alcohol, or other volatile solvents. These may
damage external surfaces or remove
indicator characters.
2CAUTION
Safety Precautions
When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
•To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
If you have difficulty in installing this unit in
your vehicle, contact your Kenwood dealer.
If it doesn’t seem to be working properly,
first press the Reset button. If the
malfunction persists, consult your Kenwood
dealer.
Some car stereos cause the sound of the
tuner to make for a moment when an
engine is activated.
The reception of the tuner may be reduced
a little if the KCA-R70FM is used.
If the sound is lower than the tuner sound,
raise up the volume level of the CD/MD
with using the receiver.
Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
NOTE
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 3
— 4 —
English
Safety Precautions
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications
to this equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction manual.
The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
This Class B digital apparatus complies with
Canadian ICES-003.
NOTE
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 4
— 5 —
General features
SRC
Turning ON the Power
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1 seconds.
The FM modulator is turned OFF and the radio can be heard.
Be sure to turn down the volume whenever you listen to the
radio or a cassette tape after stopping the disc play.
During the disc play is being conducted, you are not able to
receive ordinary Radio broadcasting because antenna output is
switched into compact disc player‘s side.
Power
Set the car radio FM station to 88.3 MHz. See Page 13 for
more information on changing the transmission frequency.
Press the [SRC] button.
Source required Display
Sirius "SIRIUS"
CD/MD auto-changer "CHANGER"/"CHANGER-1"/
"CHANGER-2"
Auxiliary input "AUX"
Off
For Auxiliary input one of the below optional accessories is
necessary.
- KCA-S210A
- CA-C1AX
- CD changer with an Auxiliary input function installed.
Switching Modes
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 5
— 6 —
English
Sirius satellite radio tuner features
d
u
4
SRCH
¢
SRC
DISP
# 1-6
SEEK
Band display Channel number
Preset station number
Press the [SRC] button.
Select the "SIRIUS" display.
•You need to subscribe to SIRIUS to receive the service by Sirius
Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO
SUBSCRIBE" appears.
It may take a little time to start receiving after you selected the
SIRIUS source.
If the signal receiving fails, "ACQUIRING SIGNAL" appears.
Selecting Sirius Mode
Press the [u] button.
Each time the button is pressed the preset band switches
between the SR1,SR2,SR3, and SR4.
Selecting the Preset Band
Sets the seeking mode.
Press the [SEEK] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display Operation
"SEEK 1" Normal manual seeking control.
"SEEK 2" Search in order of the channels in the
Preset memory.
You cannot operate this unit during switching Channel or Category.
Switching Seek Mode
SCAN indicator
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 6
— 7 —
Putting the channel in the memory.
1 Select the preset band
Press the [u] button.
2 Select the channel to put in the memory
Press the [4] or [¢] button.
3 Put the channel in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [#1]
— [#6] button.
Only the channel number is stored. Category information is not
stored.
Channel Preset Memory
Calling up the channels in the memory.
1 Select the preset band
Press the [u] button.
2 Call up the channel
Press the [#1] — [#6] button.
Preset Tuning
A channel is searched within the selected category.
1 Enter Channel Search mode
Press the [SRCH] button.
2 Select the Category
Press the [u] or [d] button.
3 Select the Channel
Press the [4] or [¢] button.
Canceling Channel Search
Press the [SRCH] button.
You cannot operate this unit until all the Category information is
acquired.
Channel Search
Scanning for the channel you want to listen to.
1 Start Channel Scan
Press the [SEEK] button for at least 1 second.
"SCAN" indicator is ON.
2 Release it when the channel you want to listen to is received
Press the [SEEK] button for at least 1 second.
Channel Scan
Selecting the channel.
Press the [4] or [¢] button.
Select the channel
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 7
— 8 —
English
— 8 —
You can display various kinds of text data transmitted from
broadcasting stations by switching as follows.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Information Display
Channel Number
Channel Name "CHANNEL"
Song Title "SONG"
Artist Name "ARTIST"
Category Name "CATEGORY"
Album Title "ALBUM"
Switching Display
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
2 Enter the channel number
Press the number buttons.
3 Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
•If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
•You can set up to Channel number 223.
If there is no signal in the input Channel, "NO CHANNEL" appears.
If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "ACQUIRING SIGNAL"
appears.
Direct Access Tuning (Function of remote)
Sirius satellite radio tuner features
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 8
— 9 —
Disc control features
Play:
Press the [SRC] button.
Select the "CHANGER"/"CHANGER-1"/ "CHANGER-2" display.
Stop the play:
Press the [SRC] button for at least 1 second.
The FM modulator is turned OFF and the radio can be heard.
Pause and play:
Press the [
6](38...Remote) button.
Each time the button is pressed it pauses and plays.
If you press the switch once more, the disc is replayed from
the paused part.
This unit enables control of an MP3-compatible disc auto-changer.
MP3 media formats, refer to the instruction manual of the MP3-
compatible disc auto-changer to be connected.
Playing Disc
Fast Forwarding
Hold down on the [¢] button.
Release your finger to play the disc at that point.
Reversing
Hold down on the [4] button.
Release your finger to play the disc at that point.
Fast Forwarding and Reversing
Searching for a song on the disc or in the MP3 folder.
Press the [4] or [¢] button.
Track Search
d
u
4
6
¢
SRC
DISP
SCN
RDM REP
M.RDM
Track number
Track time
Disc number
Indicator
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 9
Disc control features
— 10 —
English
Doing Disc Search by entering the disc number.
1 Enter the disc number
Press the number buttons on the remote.
2 Do Disc Search
Press the [+] or [] button.
Canceling Direct Disc Search
Press the [38] button.
Input "0" to select disc 10.
Direct Disc Search
(Function of disc changers with remote)
Replaying the song, disc in the Disc changer or MP3 folder
you're listening to.
Press the [REP] button.
When it's ON, the "REP" indicator is ON.
Each time the button is pressed the Repeat Play switches as
shown below.
Repeat play Display
Track Repeat Track No. blinks.
Disc Repeat Disc No. blinks.
OFF
Track/Disc Repeat
Play all the songs on the disc or MP3 folder in random order.
Press the [RDM] button.
Each time the button is pressed Random Play turns ON or OFF.
When it's ON, the "RDM" indicator is ON and the track number
blinks.
When the [¢] button is pressed, the next song select starts.
Random Play
Playing the first part of each song on the disc or MP3 folder you
are listening to and searching for the song you want to listen to.
1 Start Track Scan
Press the [SCN] button.
"SCAN" indicator is ON.
2 Release it when the song you want to listen to is played
Press the [SCN] button.
Track Scan
Doing Track Search by entering the track number.
1 Enter the track number
Press the number buttons on the remote.
2 Do Track Search
Press the [T.UP] or [T.DOWN] button.
Canceling Direct Track Search
Press the [38] button.
Direct Track Search (Function of remote)
Selecting the disc set in the Disc changer.
Press the [u] or [d] button.
Disc Search
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 10
Scrolling the displayed CD text, or MD title.
Press the [DISP] button for at least 1 second.
Text/Title Scroll
Selecting the folder you want to listen to.
1 Enter Folder Search mode
Press the [6] (38...Remote) button.
File No. display changes to Folder No. display during the Folder
Search mode.
2 Select the folder
Press the [u] or [d] button.
With the [d] button you move to the previous folder, and with
the [u] button to the next folder.
3 Decide the folder to play
Press the [6] (38...Remote)
button.
The Folder Search mode releases, and the MP3 in the folder
being displayed is played.
Folder Search (Function of MP3)
— 11 —
Play the songs on all the discs in the disc changer in random
order.
Press the [M.RDM] button.
Each time the button is pressed the Magazine Random Play turns
ON or OFF.
When it's ON, the "RDM" indicator is ON and the track and disc
number blink.
When the [¢] button is pressed, the next song select starts.
Magazine Random Play
(Function of disc changer)
Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Information Display
P-Time
Disc title "DISC TITLE"
Track title "TRACK TITLE"
Switching Display
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 11
— 12 —
English
Menu system
The Menu system basic operation method is explained here. The
reference for the Menu items and their setting content is after
this operation explanation.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Press the [u] or [d] button.
3 Set the menu item
Press the [4] or [¢] button.
You can continue by returning to step 2 and setting other items.
4 Exit Menu mode
Press the [MENU] button.
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered.
Menu System
d
u
¢
4
MENU
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 12
— 13 —
Select the frequency.
Display Value
"T-FREQ 87.7" 87.7 MHz
"T-FREQ 87.9" 87.9 MHz
"T-FREQ 88.1" 88.1 MHz
"T-FREQ 88.3" 88.3 MHz (Initial setting)
"T-FREQ 88.5" 88.5 MHz
"T-FREQ 88.7" 88.7 MHz
"T-FREQ 88.9" 88.9 MHz
"T-FREQ 89.1" 89.1 MHz
"T-FREQ 89.3" 89.3 MHz
"T-FREQ 89.5" 89.5 MHz
"T-FREQ 89.7" 89.7 MHz
"T-FREQ 89.9" 89.9 MHz
Some car radios cannot receive a 87.7 MHz frequency.
Changing the Transmission Frequency
Select the modulation level.
Display
"MOD LEVEL 1"
"MOD LEVEL 2" (Initial setting)
"MOD LEVEL 3"
"MOD LEVEL 4"
Modulation level
Setting the Dynamic control.
Display Setting
"D-CONT ON" The dynamic control is ON.
"D-CONT OFF" The dynamic control is OFF. (Initial setting)
The unit comes with the prevention of distortion function to
reduce sound distortion.
If the sound is distorted severely, press the [4]or[¢] button
on the display unit and then set the function to "ON". If the
prevention of distortion function is set to "ON", the sound
extension is reduced.
If a disc with a high recording level is used, the sound may distort
even if the prevention of distortion function is set to "ON". In this
case, reduce the modulation level.
Dynamic control
Setting the displayed text scroll.
Display Setting
"SCROLL MANU" Doesn't scroll.
"SCROLL AUTO" Scrolls when the display changes.
The texts scrolled are shown below.
• CD text
• Song title/ Artist name/ Album title/ Category name
• MD title
Text Scroll
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 13
— 14 —
English
Sirius ID (Electronic Serial Number) is displayed.
Sirius ID (ESN)
<When the KTC-SR902/KTC-SR901 is connected>
Menu system
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 14
— 15 —
SRC
M.RDM
DIRECT
SCAN
T.
DOWN
T.
UP
D.REP
REP
RDM
DISC
+
38
CH-SEARCH
Basic Operations of remote
[SRC] button
Each time the button is pressed the source switches.
Basic operations
Use two "AA" batteries.
Slide the cover while pressing downwards to remove it as
illustrated.
Insert the batteries with the + and
poles aligned properly,
following the illustration inside the case.
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
The provided batteries are intended for use in operation
checking, and their service life may be short.
When the remote controllable distance becomes short, replace
both of the batteries with new ones.
•A portion of the operations may not be possible, depending on
the unit that is connected.
Do not set the remote on hot places such as above the dashboard.
2WARNING
Loading and Replacing the battery
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 15
— 16 —
English
[T.UP]/ [T.DOWN] buttons
Doing track forward and backward.
[+]/ [–] buttons
Doing disc forward and backward.
[38] button
Each time the button is pressed the song pauses and plays.
[REP] button
Each time the button is pressed Track Repeat function turns ON
or OFF.
[D.REP] button
Each time the button is pressed Disc Repeat function turns ON
or OFF.
[RDM] button
Each time the button is pressed Random Play turns ON or OFF.
[M.RDM] button
Each time the button is pressed Magazine Random function
turns ON or OFF.
[SCAN] button
Each time the button is pressed Trak Scan function turns ON or
OFF.
[0] — [9] buttons
When in <Direct Track Search> (page 10) and <Direct Disc
Search> (page 10), enter the track/disc number.
In Disc source
[+] buttons
Select the band.
Each time the [+] button is pressed it switches between the
SR1, SR2, SR3, and SR4 bands.
[T.UP]/ [T.DOWN] buttons
Tune up or down the channels.
[0] — [9] buttons
Press buttons [#1] — [#6] to recall preset channels.
[DIRECT] button
Enters and cancels the <Direct Access Tuning> (page 8) mode.
[CH SEARCH] button
Enters and cancels the <Channel Search> (page 7) mode.
In Sirius source
Basic Operations of remote
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 16
1. To prevent a short circuit, remove the key from the ignition and
disconnect the - battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the wiring harness wires in the following order: ground,
battery, ignition.
4. Install the unit in your car.
5. Reconnect the - battery.
6. Press the reset button.
When drilling a hole in the car chassis to install the unit, check
first that nothing is on the other side.
If the fuse blows, first make sure the wires aren’t touching to
cause a short circuit, then replace the old fuse with one with
the same rating.
Do not let unconnected wires or terminals touch metal on the
car or anything else conducting electricity. To prevent a short
circuit, do not remove the caps on the ends of the
unconnected wires or the terminals.
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Insulate unconnected wires with vinyl tape or other similar
material.
Some disc changers require optional equipment for connection.
See the section on "Safety Precautions" for details.
2CAUTION
2WARNING
Accessories Installation Procedure
External view Number of items
................................................1
2
................................................2
1
................................................1
3
The use of any accessories except for those provided might result in
damage to the unit. Make sure only to use the accessories shipped with
the unit, as shown above.
— 17 —
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 17
English
— 18 —
Connecting Wires to Terminals
To prevent fire when the ignition wire (Red) or battery wire
(Yellow) is short-circuited by coming into contact with the
vehicle chassis (ground), only connect the power supply after
making the fuse box connections.
Be sure to press the reset button after installation.
2CAUTION
2WARNING
Do not install an antenna of radio equipment or
distribute the antenna wire near the changer output
wire, for this could cause malfunction with this unit.
Control output
Control input
Changer connection wire
FM modulator unit
Ground wire (Black) - (To car chassis)
Car fuse box
ACC
Ignition key
switch
Output
Battery
Display unit
Battery wire + (Yellow)
Ignition wire
+ (Red)
CD/MD auto - changer input
CD/MD auto-changer / Sirius satellite radio tuner
O-N selection switch
"N"
FM/AM
antenna input
Or
Audio Right output
Audio Left output
FM/AM
antenna output
Antenna plug for
automobile
Car stereo
with FM tuner
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 18
SWITCH
AUX
OFF ON
SWITCH
PROTOCOL
ON
IN
AUX
] N
Control output
Control input
CD/MD auto-changer
Changer connection wire
FM modulator unit
Output
Display unit
CD/MD auto - changer input
Set the PROTOCOL selection switch to the "N" position.
Up to two units of the Sirius satellite radio tuner unit or
disc autochanger can be connected at the same time.
KCA-S210A
Sirius satellite
radio tuner unit
Connection wire
Connection wire
If you want to connect disc changers released in 1997 or earlier
"TO CHANGER"
"TO HEAD UNIT"
"TO HU"
"TO CHANGER1"
— 19 —
"TO CHANGER2"
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 19
English
— 20 —
Installation
Installation of Display unit
• Installation without using the trim mount plate 3
Attach one strip of Velcro to the
slanted-line of the display units
as shown to the left, and attach
the other strip of Velcro to the
parts where you wish to attach
the display units.
Then, put velcros together and
install the display units.
• Installation using the trim mount plate 3
Display unit
Display unit
2
3
Pass the wire from the display unit through the hole on the
trim mount plate and push fit the display unit into the trim
mount plate until it locks.
Be sure not to place the unit on such place as where it is
exposed to direct sunlight and temperature eventually rises.
It results in the deformation of the case.
Depending on the installing location, the display unit may
not be able to receive the signals from the controller unit.
Install them after confirming that the signals can be
received.
Install the unit in such a way that it does not disturb driving.
2CAUTION
Installation of FM modulator unit
Install the FM modulator unit beneath the front seat using
Metal fixture and Bind head screw as shown in the above
figure.
Take sufficient care so
that the wires are not
caught under the seat.
If they are caught, they
may break.
2CAUTION
1
KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Kenwood Car Satellite Radio System KCA-R71FM ユーザーマニュアル

カテゴリー
車のビデオシステム
タイプ
ユーザーマニュアル
このマニュアルも適しています