Sony XR-F5005 取扱説明書

3-262-940-23 (1)

Operating Instructions

XR-F5100S

XR-F5100

XR-F5005

For installation and connections, see the supplied installation/connections manual.

CT

GB

FM

/

MW/SW

Cassette Car Stereo

2

Welcome !

Thank you for purchasing this Sony Cassette

Player. You can enjoy its various features even

more with:

XR-F5100S/XR-F5100

• Optional CD/MD units (both changers and

players)*

1

.

• CD TEXT information (displayed when a CD

TEXT disc*

2

is played on a connected optional

CD unit with the CD TEXT function).

• Supplied controller accessory

Card remote commander RM-X115

• Optional controller accessory

Rotary commander RM-X4S

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

XR-F5005

• Optional controller accessories

Card remote commander RM-X114

Rotary commander RM-X4S

3

Table of Contents

Location of controls . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 7

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 8

Detaching the front panel . . . . . . . . . . . . . . . 8

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 9

Cassette Player

Listening to a tape . . . . . . . . . . . . . . . . . . . . 10

Playing a tape in various functions . . . . . . . 10

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 11

Receiving the stored stations . . . . . . . . . . . . 11

Storing only the desired stations . . . . . . . . . 12

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 12

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 13

Other Functions

Using the rotary commander . . . . . . . . . . . . 14

Adjusting the sound characteristics . . . . . . . 15

Quickly attenuating the sound . . . . . . . . . . . 15

Changing the sound and display settings. . . 16

Setting the equalizer (EQ3) . . . . . . . . . . . . . 17

Setting the Dynamic Soundstage Organizer

(DSO) . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

CD/MD Unit (optional)

(XR-F5100S/XR-F5100)

Playing a CD or MD . . . . . . . . . . . . . . . . . . 18

Display items . . . . . . . . . . . . . . . . . . . . . . . 19

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 20

Playing tracks in random order

— Shuffle Play. . . . . . . . . . . . . . . . . . . . 20

Labelling a CD

— Disc Memo . . . . . . . . . . . . . . . . . . . . 21

Locating a disc by name

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 22

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 22

Removing the unit. . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 25

Error displays/Messages . . . . . . . . . . . . . . . 26

4

Location of controls

Refer to the pages listed for details.

a DSO button 18

b SOURCE (Power on/Radio/Tape/CD*

1

/

MD*

1

) button

To select the source.

c LIST button 12, 13, 21, 22

d Receptor for the card remote

commander

e Display window

f Z (eject) button (located on the front side

of the unit, behind the front panel) 10

g OPEN button 8, 10

h EQ3 button 17

i MODE (o) button

To change operation.

j Volume control dial/Select button

Rotate to:

– Adjust the volume.

– Adjust settings.

Press to:

– Select items.

k DSPL (display mode change) button

9, 13, 16, 19, 21

l SENS/MTL button 10, 11, 12

m BTM button 11

n RESET button (located on the front side of

the unit, behind the front panel) 8

o Number buttons 16

Tape:

(3): REP 10

(5): BL SKIP 10

(6): ATA 10

Radio:

To store stations/receive stored stations.

CD*

1

/MD*

1

:

(3): REP 20

(4): SHUF 20

p Frequency select switch (located on the

bottom of the unit)

See “Frequency select switch” in the

Installation/Connections manual.

q OFF (Stop/Power off) button*

2

8, 10,

18

*1 XR-F5100S/XR-F5100 only

*2

Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

and hold (OFF) on the unit until the display

disappears.

Otherwise, the display does not turn off and this

causes battery drain.

P

U

S

H

D

I

A

L

S

E

L

E

C

T

S

O

U

R

C

E

D

I

S

C

/

P

R

E

S

E

T

OPEN

6543

BBESHUF ATABL SKIPREPMTL

21

BTMSENS

EQ3

D

S

P

L

M

O

D

E

XR-F5100S

XR-F5100

XR-F5005

DSO

SEEK SEEK

L

I

S

T

OFF

5

r DISC (ALBUM)/PRESET buttons (+/–)

To receive preset stations/change the disc*

1

,

skip albums*

2

.

XR-F5100S/XR-F5100 only

*1 When an optional CD/MD unit is connected.

*2 Available only when an optional CD unit with the

MP3 file control function is connected, and MP3

file is played.

s SEEK buttons (–/+)

To skip tracks/fast-forward, reverse a track/

tune in stations automatically, find a station

manually/select a setting.

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

a DSPL button

b SOURCE button

c SEEK (–/+) buttons

d OFF button

e VOL (+/–) buttons

f MODE button

g PRESET (DISC/ALBUM) (+/–) buttons

h ATT button

Note

If the display disappears by pressing (OFF), it cannot

be operated with the card remote commander unless

(SOURCE) on the unit is pressed, or a cassette tape is

inserted to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery” on page 23.

S

E

K

SEEK

P

U

S

H

D

I

A

L

S

E

L

E

C

T

S

O

U

R

C

E

D

I

S

C

/

P

R

E

S

E

T

SENS

EQ3

D

S

P

L

M

O

D

E

DSO

SEEK SEEK

L

I

S

T

C

A

T

(SEEK)

(–): to select

leftwards/

.

(SEEK)

(+): to select

rightwards/

>

(DISC/PRESET)

(+): to select upwards

(DISC/PRESET)

(–): to select downwards

Card remote commander RM-X115

(XR-F5100S/XR-F5100)

continue to next page t

ATTOFF

DSPL MODE

SOURCE

VOL

+

–

PRESET

+

PRESET

–

SEEK

–

SEEK

+

6

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

a DSPL button

b MENU button*

c SOURCE button

d SEEK (–/+) buttons

e SOUND button

f OFF button

g VOL (+/–) buttons

h MODE button

i LIST button

j DISC/PRESET (+/–) buttons

k ENTER button*

l ATT button

* Not available for this unit

Note

If the display disappears by pressing (OFF), it cannot

be operated with the card remote commander unless

(SOURCE) on the unit is pressed, or a cassette tape is

inserted to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery” on page 23.

Card remote commander RM-X114

(optional) (XR-F5005)

DISC

–

ATTOFF

DSPL MODE

SOURCE

DISC

+

VOL

+

–

PRESET

+

SEEK

+

SEEK

–

PRESET –

SOUND

ENTER

MENU

LIST

7

Precautions

• If your car was parked in direct sunlight, allow

the unit to cool off before operating it.

• If no power is being supplied to the unit, check

the connections first. If everything is in order,

check the fuse.

• If no sound comes from the speakers of a 2-

speaker system, set the fader control to the

centre position.

• When a tape is played back for a long period,

the cassette may become warm because of the

built-in power amplifier. However, this is not a

sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or tapes.

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while playing

the cassette. The cassette player head should be

cleaned after each 50 hours of use.

The use of cassettes longer than 90 minutes

is not recommended except for long

continuous play

The tape used for these cassettes is very thin and

tends to stretch easily.

Frequent playing and stopping of these tapes

may cause them to become entangled in the

cassette deck mechanism.

Slack

8

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

Tape playback or radio reception stops (the

key illumination and display remain on).

* If your car has no ACC (accessory) position on

the ignition switch, be sure to turn the unit off by

pressing (OFF) until the display disappears to

avoid car battery drain.

2 Press (OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel with you, use the

supplied front panel case.

RESET button

1

2

9

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Press (SOURCE) on the unit (or insert a

cassette) to operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press ( D SPL) for 2 seconds.

The hour indication flashes.

1 Rotate the volume control dial to set

the hour.

2 Press the select button.

The minute indication flashes.

3 Rotate the volume control dial to set

the minute.

2 Press ( D SPL).

The clock starts. After the clock setting is

complete, the display returns to normal play

mode.

x

10

Cassette Player

Listening to a tape

1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, press (SOURCE)

repeatedly until “FWD” or “REV” appears to

start playback.

Note

The AMS function may not work when:

– the blanks between tracks are shorter than 4

seconds.

– there is noise between tracks.

– there are long sections of low volume or quiet

sections.

Playing a tape in various

functions

You can play the tape in various functions:

• REP (Repeat Play) repeats the current track.

• BL SKIP (Blank Skip) skips blanks longer than

8 seconds.

• ATA (Automatic Tuner Activation) turns on the

tuner automatically when fast-winding the tape.

• MTL (Metal) lets you play a metal or CrO

2

tape.

During tape playback, press the

desired function button repeatedly

until “ON” in the display appears.

Function buttons

(3): REP

(5): BL SKIP

(6): ATA

(SENS): MTL

Example: ATA function

ATA function starts.

To return to normal play mode, select “OFF.”

To Press

Change the tape’s

playback direction

(MODE) (o)

Stop playback (OFF)

Eject the cassette (OPEN) then Z

Skip tracks

– Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

– Manual Search

(SEEK) (m/M)

[hold to desired point]

The side facing up is played.

The side facing down is played.

11

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, MW, SW1 and SW2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (BTM) for 2 seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

If preset tuning does not work

— Automatic tuning/Local Seek Mode

Automatic tuning:

Press ( SEEK) (+) or (SEEK) (–) to

search for the station.

Scanning stops when the unit receives a

station. Repeat the operation until the desired

station is received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) repeatedly

until “LOCAL-ON” appears.

Only the stations with relatively strong

signals will be tuned in.

To cancel the local seek mode, press (SENS)

twice when receiving FM.

Note

When receiving MW or SW, to cancel the local seek

mode, press (SENS) (“LOCAL-OFF” appears).

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) (+) or (SEEK) (–) to

locate the approximate frequency, then press

(SEEK) (+) or (SEEK) (–) repeatedly to fine adjust to

the desired frequency (manual tuning).

continue to next page t

12

If FM stereo reception is poor

— Monaural Mode

During radio reception, press (SENS)

repeatedly until “MONO-ON” appears.

The sound improves, but becomes monaural

(“ST” disappears).

To return to normal radio reception mode, press

(SENS) (“MONO-OFF” appears).

Tip

If FM broadcasts are difficult to hear, set DSO to

“OFF” (page 18).

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (SEEK) (+) or ( SEEK) (–) to tune

in the station that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

Storing station names

— Station Memo

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

station.

Storing the station names

1 Tune in a station whose name you

want to store.

2 Press (LIST) for 2 seconds.

3 Enter the characters.

1Press the volume control dial to

select the desired character.

A y B y C ... y 0 y 1 y 2 ...

y + y – y

*

... y * y A

* (blank space)

2Press the select button after

locating the desired character.

The next character flashes.

3Repeat steps 1 and 2 to enter the

entire name.

4 To return to normal radio reception

mode, press (LIST) for 2 seconds.

Tip

Simply overwrite or enter “ ” to correct or erase a

character.

13

Erasing the station name

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (LIST) for 2 seconds.

4 Press (DSPL) for 2 seconds.

The stored names will appear.

5 Press the volume control dial to select

the station name you want to erase.

6 Press the select button for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (LIST) for 2 seconds.

The unit returns to normal radio reception

mode.

Note

If you have already erased all of the station names,

“NO DATA” appears in step 6.

Tuning in a station through

a list

— List-up

1 During radio reception, press

(LIST).

The frequency appears in the display.

2 Press (LIST) repeatedly until you find

the desired station.

3 Press ( SEEK) (+) or (SEEK) (–) to tune

in the desired station.

14

Other Functions

You can also control the unit (and optional CD/

MD units*) with a rotary commander

(optional).

* XR-F5100S/XR-F5100 only

Using the rotary commander

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

By rotating the control

Rotate and release to:

– Locate the beginning of tracks on the tape.

– Tune in stations automatically.

– Skip tracks on the disc*

1

.

Rotate, hold, and release to:

– Fast-wind the tape.

– Find a station manually.

– Fast-forward/reverse a track*

1

.

Tip

To start playback while fast-winding the tape, press

(MODE).

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change discs during CD (MD) playback*

1

.

During playback of a CD containing MP3

files*

3

Push in and repeat rotating quickly to:

– Change discs one by one.

Push in, then rotate and hold to:

– Change albums*

3

.

*1 Only if the corresponding optional equipment is

connected (XR-F5100S/XR-F5100 only).

*2 If your car has no ACC (accessory) position on the

ignition key switch, after turning off the ignition, be

sure to press and hold (OFF) until the display

disappears.

*3 Available only when an optional CD unit with the

MP3 file control function is connected, and MP3 file

is played (XR-F5100S/XR-F5100 only).

Press To

(SOURCE) Change the source

(Radio/Tape/CD*

1

/MD*

1

)/

Power on

(MODE) Change operation

(Radio band/Tape playback

direction/CD unit*

1

/MD

unit*

1

)

(ATT) Attenuate the sound

(OFF)*

2

Stop playback or radio

reception/Power off

(SEL) Adjust and select

(DSPL) Change the display item

SEL

DSPL

MODE

SEL

DSPL

MODE

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SEL)

(ATT)

(DSPL)

(OFF)

(MODE)

SEEK/AMS

control

PRESET/DISC

control

15

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SEL) for 2 seconds while

pushing the VOL control.

Adjusting the sound

characteristics

You can adjust the balance, fader, low pass filter

and subwoofer volume.

1 Press the select button repeatedly

until “BAL,” “FAD,” “LPF” or “SUB”

appears.

Each time you press the select button, the

item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right) t FAD (front-rear) t

LPF (low pass filter)*

2

*

3

t

SUB (subwoofer volume)*

2

*

4

*1 When EQ3 is activated (page 17).

*2 When “SUB” is selected (page 16).

*3 The cut off frequency is adjustable to 78 Hz,

125 Hz or OFF.

*4 The volume level is adjustable between –10

and +10 steps. (Below –10, “ATT” is displayed.)

2 Rotate the volume control dial to

adjust the selected item.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

Press (ATT).

After “ATT-ON” momentarily appears,

“ATT” appears in the display.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

To increase

To decrease

16

Changing the sound and

display settings

The following items can be set:

• REAR/SUB*

1

— to switch the audio output

REAR or SUB.

– Select “REAR” to output to a power amplifier.

– Select “SUB” to output to a subwoofer.

• A.SCRL (Auto Scroll)*

2

(page 19).

• M.DSPL (Motion Display) — to turn the

motion display on or off.

– Select “ON” to activate the motion display

(the moving pattern appears in the display).

– Select “OFF” to deactivate the motion display.

•DEMO*

1

— to turn the demonstration display

on or off.

– Select “ON” to activate the demonstration

display (The demonstration starts about 10

seconds after the unit is turned off).

– Select “OFF” to deactivate the

demonstration display.

•BEEP*

3

— to turn the beeps on or off.

• DIM — to change the brightness of the display.

– Select “ON” to dim the display.

– Select “OFF” to deactivate the Dimmer.

Switching the REAR/SUB*

1

Press the select button and then rotate

the volume control dial.

After 3 seconds, the display returns to normal

play mode.

Selecting the desired item

Press the select button and the

desired button simultaneously.

select button + (3): A.SCRL*

2

select button + (4): M.DSPL

select button + (4): DEMO*

1

select button + (6): BEEP*

3

select button + (DSPL): DIM

After the mode setting is complete, the display

returns to normal play mode.

To cancel the item, press the select button and the

desired button simultaneously again.

*1 When the unit is turned off.

*2 When an optional CD/MD unit is connected and

played (XR-F5100S/XR-F5100 only).

*3 The beep sound is output only when the built-in

amplifier is used.

17

Setting the equalizer (EQ3)

You can select an equalizer curve for 7 music

types (XPLOD, VOCAL, CLUB, JAZZ, NEW

AGE, ROCK, CUSTOM and OFF (equalizer

OFF)).

You can store a different equalizer setting for

each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a source

(Radio, Tape, CD* or MD*).

2 Press (EQ3) repeatedly to select the

desired equalizer curve.

Each time you press (EQ3), the item

changes.

To cancel the equalizing effect, select “OFF.”

Adjusting the equalizer curve

You can store and adjust the equalizer settings

for different tone ranges.

1 Press (SOURCE) to select a source

(Radio, Tape, CD* or MD*).

2 Press (EQ3) repeatedly to select the

desired equalizer curve.

3 Adjusting the equalizer curve.

1 Press the select button repeatedly

to select the desired tone range.

Each time you press the select button, the

tone range changes.

LOW t MID t HI (t BAL t FAD t

LPF t SUB)

2 Rotate the volume control dial to

adjust to the desired volume level.

The volume level is adjustable by 1 dB

steps from –10 dB to +10 dB.

3 Repeat step 1 and 2 to adjust the

equalizer curve.

To restore the factory-set equalizer curve,

press the select button for 2 seconds.

* XR-F5100S/XR-F5100 only

Note

When EQ3 is set to “OFF,” you cannot adjust the

equalizer curve settings.

18

Setting the Dynamic

Soundstage Organizer (DSO)

If your speakers are installed into the lower part

of the doors, the sound will come from below

and may not be clear.

The DSO (Dynamic Soundstage Organizer)

function creates a more ambient sound as if there

were speakers above the dashboard (virtual

speakers).

You can store the DSO setting for each source.

DSO mode and image of virtual speakers

*1 DSO-1

*2 DSO-2

*3 DSO-3

*4 DSO-OFF

1 Press (SOURCE) to select a source

(Radio, Tape, CD* or MD*).

2 Press (DSO) repeatedly until the

desired DSO setting appears.

Each time you press (DSO), the DSO setting

changes.

To cancel the DSO function, select “DSO-

OFF.” After 3 seconds, the display returns to

normal play mode.

* XR-F5100S/XR-F5100 only

Notes

• Depending on the type of car interior or type of

music, DSO may not have a desirable effect.

• If FM broadcasts are difficult to hear, set DSO to

“OFF.”

CD/MD Unit (optional)

(XR-F5100S/XR-F5100)

This unit can control external CD/MD units

(optional).

If you connect an optional CD unit with the CD

TEXT function and the CUSTOM FILE

function, the CD TEXT information will appear

in the display when you play a CD TEXT disc.

If you connect MP3 playable CD units (eg. MP3

CD changer), you can play MP3 files;

compressed audio files with quality sound.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*

1

).”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

When the last file on the disc is over

The file number indication returns to “1,” and

playback restarts from the first file of the disc.

*1 MS: MG Memory Stick System-up Player MGS-X1

*2 Available only when an optional CD unit with the

MP3 file control function is connected, and MP3 file

is played.

*3

*2

*1

*4

*3

*2

*1

To Pres s

Stop playback (OFF)

Skip tracks

– Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

– Manual Search

(SEEK) (m/M)

[hold to desired point]

Skip discs

– Disc selection

(DISC/PRESET) (+/–)

[once for each disc]

Skip albums*

2

– Album selection

(DISC/PRESET) (+/–)

[hold to desired point]

19

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” When “MS” appears in the

source display, MGS-X1 starts to play. When “MD”

appears in the source display, press (MODE) to

select “MS,” to start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” If your desired MD unit

appears in the source display, it starts to play. If “MS”

or another MD unit appears in the source display,

press (MODE) to select your desired MD unit, to

start playback.

Notes when connecting MP3 playable CD unit(s)

• If a disc with no MP3 files (tracks) is inserted, “NO

MUSIC” appears in the display and playback of the

next disc starts.

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before playback begins. During this time, “READ” is

displayed. Play will automatically start when reading

is complete.

Note

With an optional unit connected, playback of the same

source will continue on to the optional CD/MD unit.

Display items

When the disc/album/track changes, any

prerecorded title*

1

of the new disc/album/track is

automatically displayed. (If the A.SCRL (Auto

Scroll) function is set to “ON,” names exceeding

8 characters will be scrolled (page 16).)

*1 When pressing (DSPL), “NO NAME” indicates that

there is no Disc Memo (page 21) or no prerecorded

name to display.

*2 Only for CD TEXT discs with the artist name.

*3 Only for MP3 files.

Only track name/artist name/album name in ID3

tag is displayed.

When pressing (DSPL), “NO ID3” indicates that

there is no ID3 tag to display.

Notes

• Some characters cannot be displayed. Characters

and signs which cannot be displayed appear as “ *.”

• For some CD TEXT discs or ID3 tags with very

many characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc.

Tips

• When the A.SCRL (Auto Scroll) function is set to

“OFF” and the disc/album/track is changed, the disc/

album/track name or ID3 tag does not scroll.

• When an MP3 file is played and the album is

changed, the new album number is displayed.

To Press

Switch display item (DSPL)

Displayable items

• Disc

number/Track number/Elapsed

playing time

• Disc name*

1

/Artist name*

2

• Album (folder) name*

3

• Track (file) name*

1

*

3

• ID3 tag*

3

• Clock

Source

20

Playing tracks repeatedly

— Repeat Play

You can select:

• REP-TRACK — to repeat the current track.

•REP-ALBM*

1

— to repeat the tracks in the

current album.

•REP-DISC*

2

— to repeat the tracks in the

current disc.

*1 Available only when an optional CD unit with the

MP3 file control function is connected, and MP3 file

is played.

*2 Available only when one or more optional CD/MD

units are connected.

During playback, press (3) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select

“REP-OFF.”

Playing tracks in random

order

— Shuffle Play

You can select:

• SHUF-ALBM*

1

— to play the tracks in the

current album in random order.

• SHUF-DISC — to play the tracks in the current

disc in random order.

• SHUF-CHGR*

2

— to play the tracks in the

current optional CD (MD) changer in random

order.

• SHUF-ALL*

3

— to play all the tracks in all

connected CD (MD) units in random order.

*1 Available only when an optional CD unit with the

MP3 file control function is connected, and MP3 file

is played.

*2 Available only when one or more optional CD (MD)

changers are connected.

*3 Available only when two or more optional CD (MD)

units are connected.

During playback, press (4) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select

“SHUF-OFF.”

Note

“SHUF-ALL” will not shuffle tracks between CD units

and MD units.

ページが読み込まれています...

Sony XR-F5005 取扱説明書

このマニュアルも適しています

Sony XR-F5005 取扱説明書

他の言語で

関連論文

その他のドキュメント