Philips SP9860/13 ユーザーマニュアル

SP9863

SP9861

SP9860

www.philips.com/support/ifu-lux

SP98xx/14

SP98xx/13

SP98xx/12

SP98xx/14

SP98xx/16

SP98xx/17

7

6

22 21

19

20

18

17

16

15

14

13

12

11

8

10

9

1

2

3

4

5

empty page before TOC

English 6

简体中文

41

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Please read this user manual, as it contains

information about the features of this shaver as

well as some tips to make shaving easier and more

enjoyable.

General description (Fig. 1)

1 Protection cap for cleansing brush attachment

2 Click-on cleansing brush attachment

3 Attachment holder

4 Supply unit

5 USB plug

6 Qi charging pad

7 Pouch

8 Replacement reminder

9 Notification symbol

10 Cleaning reminder

11 Travel lock symbol

12 Battery charge indicator

13 Battery charge percentage

14 Personal comfort settings bar

15 Personal comfort settings decrease button

16 Personal comfort settings increase button

17 On/off button

18 Shaving unit with hair chamber

19 Click-on precision trimmer attachment

20 Click-on beard styler attachment

21 Comb for beard styler attachment

22 Click-on nose trimmer attachment

The accessories supplied may vary for different

products. The box shows the accessories that have

been supplied with your appliance.

6

English

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

Warning

- The appliance is a Class III

construction.

- To charge the battery, only use

the detachable supply unit and

charging pad (supply unit, type

HQ87. Charging pad, type

HQ8509 or HQ8510) provided

with the appliance.

- Do not use an USB extension

cord.

7

English

- This appliance can be used by

children aged from 8 years and

above and persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge if

they have been given

supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved. Children

shall not play with the

appliance. Cleaning and user

maintenance shall not be made

by children without supervision.

- Always check the appliance and

its attachments before you use

it. Do not use the appliance or

its attachments if it is damaged,

as this may cause injury. Always

replace a damaged part with

one of the original type.

- Do not open the appliance to

replace the rechargeable

battery.

8

English

- The charging pad is not

intended for use in a car. It may

interfere with the automotive

electronic systems.

Caution

- Never immerse the charging pad in water,

nor rinse it under the tap.

- Always make sure the charging pad is

completely dry before you connect it to the

wall socket.

- Never use water hotter than 60°C to rinse

the shaver.

- Only use this appliance for its intended

purpose as shown in the user manual.

- For safety reasons, do not use the shaver

while you drive a car.

- For hygienic reasons, the appliance should

only be used by one person.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive

liquids such as petrol or acetone to clean

the appliance.

- Do not put the appliance or any part in the

dishwasher.

9

English

- Water may trickle out of the shaver after you

rinse it. This is normal and not dangerous

because all electronics are enclosed in a

sealed power unit inside the shaver.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener

to prevent irreparable damage to the supply

unit.

- Do not use the appliance on chapped skin,

open wounds, healing wounds, skin

recovering from surgery or if you suffer from

a skin disease or skin irritation, such as

severe acne, sunburn, skin infection, skin

cancer, inflammation, eczema, psoriasis,

nylon allergy etc.

- Do not use the appliance if you are taking

steroid-based medication.

- If you wear piercings on your face, remove

the piercings before you use the click-on

attachments or make sure that you do not

use the appliance on or near the piercing.

10

English

- If you wear jewelry, contact lenses or

glasses, remove them before you use the

click-on attachments, or make sure that you

do not use the appliance on or near jewelry

or glasses.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the

tap.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Note: Remove any sticker or protective foil from

the display before using the product.

Charging

When the shaver is charging, the ring on the pad

lights up and the battery charge indicator on the

shaver flashes white.

The battery charge is indicated by the battery

charge percentage flashing on the display, which is

shown when the shaver is moved.

Quick charge: After approx. 18 minutes charging,

the appliance contains enough energy for one

shave.

11

English

Battery fully charged

When the battery is fully charged, the battery

charge indicator and the ring on the pad light up

white continuously.

Note: Both lights switch off automatically after 15

minutes.

The battery charge percentage lights up white

continuously, which is shown when the shaver is

moved.

Battery low

When the battery is almost empty, the battery

charge indicator flashes orange and the shaver

beeps. At this point there is enough energy left for

one shave..

Remaining battery charge

The remaining battery charge is indicated by the

battery charge percentage shown on the display.

Personal comfort settings

The shaver has a feature that allows you to

personalize your settings. Depending on your

personal shaving needs, choose between three

settings, from low to high: comfort, dynamic or

efficiency. When you press the button on the left

or right of the display, the segment of the personal

comfort settings bar lights up to indicate the

selected setting. To select a lower or higher setting,

press the button on the left or right of the display.

12

English

Cleaning reminder

Clean the shaver after every use for optimal

performance (see 'Cleaning and maintenance').

When you switch off the shaver, the cleaning

reminder flashes to remind you to clean the

shaver.

Travel lock

3 sec.

When you are going to travel, you can lock the

shaver to prevent it from accidentally turning on.

Replacement reminder

For maximum shaving performance, replace the

shaving heads every two years. The shaver is

equipped with a replacement reminder which

reminds you to replace the shaving heads. The

shaver beeps, the replacement reminder lights up

and the arrows flash to indicate that you have to

replace the shaving heads.

Note: After replacing the shaving heads, you can

reset the replacement reminder by pressing the

on/off button for 7 seconds. If you do not reset the

replacement reminder, the shaver resets

automatically after 9 shaves.

Notification symbol

Overheating

13

English

If the shaver overheats during charging, the

notification symbol flashes. When this happens,

the shaver stops charging automatically. Charging

continues once the temperature of the shaver has

decreased to the normal level after approx. 10

minutes.

Blocked shaving heads

If the shaving heads are blocked, the notification

symbol lights up red continuously. The

replacement reminder and the cleaning reminder

alternately flash white and the shaver beeps. In

this case, the motor cannot run because the

shaving heads are dirty or damaged. If the shaving

heads are dirty, you have to clean them. If the

shaving heads are damaged, you have to replace

them.

Foreign object on Qi charging pad

If there is a foreign (metal) object on the Qi

charging pad during charging, the notification

symbol on the Qi charging pad lights up. The Qi

charging pad switches off automatically and

restarts 5 minutes after the foreign object has

been removed.

Do not place any foreign (metal) objects on the Qi

charging pad. Only use the Qi charging pad to

charge the shaver or another device (e.g.

smartphone) compliant with Qi charging.

Charging

Charge the shaver before you use it for the first

time and when the display indicates that the

battery is almost empty.

Charging takes approx. 3 hours. A fully charged

shaver has a shaving timeof up to 60 minutes.

14

English

Note: You cannot use the shaver while it is

charging.

Quick charge

After approx. 18 minutes of charging the shaver

contains enough power for one shave.

Charging with the Qi charging pad

Note: The charging pad is Qi compliant. Only

charge the Qi compatible shaver or other Qi

charging compliant appliances on the Qi charging

pad provided.

Note: Carefully shake off excess water before

placing the shaver on the Qi pad.

1 Put the USB plug in the supply unit supplied.

2

1

2 Put the supply unit in the wall socket.

3 Place the shaver on the cross mark of the Qi

charging pad. Make sure the shaver fits into the

cavity of the Qi charging pad.

Only charge the shaver on the provided Qi

charging pad.

- The Qi charging pad beeps and the ring on the

pad lights up when the shaver is correctly

placed and connected for charging.

15

English

- When the shaver is charging, the ring on the

pad lights up and the battery charge indicator

on the shaver flashes white. The battery charge

is indicated by the battery charge percentage

flashing on the display, which is shown when

the shaver is moved.

4 When the battery is fully charged, the battery

charge indicator and the ring on the pad light

up white continuously. Both lights switch off

automatically after 15 minutes.

Using the shaver

Always check the shaver and all accessories

before use. Do not use the shaver or any

accessory if it is damaged, as this may cause

injury. Always replace a damaged part with one of

the original type.

This symbol indicates that the shaver can be used

in the bath or shower.

- Use this shaver for its intended household use

as described in this manual.

- For hygienic reasons, the shaver should only be

used by one person.

- Trimming is easier when the skin and hair are

dry.

Note: This shaver is waterproof. It is suitable for

use in the bath or shower and for cleaning under

the tap. For safety reasons, the shaver can

therefore only be used without charging cord.

Switching the shaver on and off

1 To switch on the shaver, press the on/off

button once.

The battery charge percentage lights up for a

few seconds.

16

English

2 To switch off the shaver, press the on/off

button once.

The battery charge percentage lights up for a

few seconds and shows the remaining battery

charge.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week) and

exclusively with this appliance for a period of 3

weeks.

Shaving tips

- For the best results on skin comfort, pre-trim

your beard if you have not shaved for 3 days or

longer.

- Select your personal comfort setting (see

'Personal comfort settings').

Dry shaving

1 Switch on the shaver.

2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

3 Switch off and clean the shaver after each use.

The display lights up for a few seconds to show

the remaining battery charge.

17

English

Wet shaving

For a more comfortable shave, you can also use

this shaver on a wet face with shaving foam or

shaving gel.

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the shaver.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face.

7 Switch off the shaver and clean it after each

use.

18

English

Note: Make sure that you rinse all foam or shaving

gel off the shaver.

Using click-on attachments

It is recommended not to use the click-on

cleansing brush attachment directly after shaving

to prevent skin irritation.

Removing or attaching click-on attachments

1 Make sure the shaver is switched off.

2 Pull the attachment straight off the shaver.

Note: Do not twist the attachment while you

pull it off the shaver.

3 Insert the lug of the attachment into the slot in

the top of the shaver. Then press down the

attachment to attach it to the shaver(‘click’).

Attachment holder

Note: Attach the click-on cleansing brush

attachment on the attachment holder first, before

you place the attachment onto the appliance.

1 Place the click-on attachment onto the

attachment holder until it locks into position

with a click.

Using the precision trimmer attachment

You can use the precision trimmer attachment to

touch up your beard, sideburns and moustache.

19

English

1 Attach the attachment to the appliance (‘click’).

2 Switch on the appliance.

3 Hold the precision trimmer perpendicular to the

skin and move it downwards while exerting

gentle pressure.

4 Switch off the appliance and clean the

attachment after use (see 'Deactivating the

travel lock').

Using the beard styler attachment with comb

You can use the beard styler with the comb

attached to style your beard at one fixed setting,

but also at different length settings. You can also

use it to pre-trim any long hairs before shaving for

a more comfortable shave.

Note: The beard styler is only intended for

trimming facial hair. Do not use on areas below the

neck.

The length settings on the beard styler attachment

correspond to the remaining hair length after

cutting and range from 1 to 5mm (3/64 - 3/16in).

1 Attach the attachment to the appliance ('click').

20

English

ページが読み込まれています...

Philips SP9860/13 ユーザーマニュアル

このマニュアルも適しています

Philips SP9860/13 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント