Philips S5688/76 ユーザーマニュアル

Series S5000

S5688

3

4

5

6

9

10

11

14

12

13

19

15

1

2

16

17

18

8

7

empty page before TOC

English 6

简体中文

30

English

Contents

General description (Fig. 1)_______________________________________ 6

Introduction_______________________________________________________ 7

Important safety information_____________________________________ 7

The display________________________________________________________ 9

Charging___________________________________________________________ 12

Using the appliance______________________________________________ 13

Cleaning and maintenance_______________________________________ 18

Storage____________________________________________________________ 20

Replacement______________________________________________________ 21

Ordering accessories_____________________________________________ 23

Recycling__________________________________________________________ 24

Warranty and support____________________________________________ 26

Troubleshooting__________________________________________________ 26

General description (Fig. 1)

1 Protection cap for nose trimmer attachment

2 Click-on nose trimmer attachment

3 Click-on precision trimmer attachment

4 Protection cap for shaving unit

5 Click-on shaving unit

6 Shaving head holder release button

7 On/off button

8 Turbo button

9 Handle

10 Socket for small plug

11 Battery charge indicator with 3 lights

12 Unplug for use symbol

13 Travel lock symbol

14 Replacement reminder

15 Cleaning reminder

16 Charging stand

17 Supply unit

18 Small plug

19 Pouch

6

English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Important safety information

Read this important information carefully before

you use the appliance and its accessories and save

it for future reference. The accessories supplied

may vary for different products.

Danger

- Keep the supply unit dry.

- This symbol means: Forbidden to clean under a

running tap.

Warning

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut off the supply unit to replace it with another

plug, as this causes a hazardous situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning use of the appliance in a safe way

and understand the hazards involved. Children

shall not play with the appliance. Cleaning and

user maintenance shall not be made by

children without supervision.

7

English

- Always unplug the appliance before you clean it

under the tap.

- Always check the appliance before you use it.

Do not use the appliance if it is damaged, as

this may cause injury. Always replace a

damaged part with one of the original type.

- This appliance contains batteries that are non-

replaceable.

- Do not open the appliance to replace the

rechargeable battery.

Caution

- Never use water hotter than 60°C to rinse the

appliance.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the

appliance.

- Water may drip from the socket at the bottom

of the appliance when you rinse it. This is

normal and not dangerous because all

electronics are enclosed in a sealed power unit

inside the appliance.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

8

English

General

- This symbol means: Suitable to be used in the

shower. It is allowed to use this appliance close

to a bathtub, shower or other containers filled

with water.

- This appliance is waterproof. It is suitable for

use in the bath or shower and for cleaning

under the tap. For safety reasons, the appliance

can therefore only be used without cord.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Battery charge indicator

Note: If you press the on/off button during

charging, the 'unplug for use' symbol flashes white

to remind you that you have to disconnect the

appliance from the wall socket.

Quick charge: When the battery is empty and you

connect the appliance to the wall socket, the lights

of the battery charge indicator light up one after

the other repeatedly. When the appliance contains

enough energy for one shave, the bottom light of

the battery charge indicator starts flashing slowly.

While the appliance continues to charge, first the

bottom light of the battery charge indicator flashes

and then lights up continuously. Then the second

light flashes and then lights up continuously, and

so on until the appliance is fully charged.

Battery fully charged

Note: When the battery is full, the display switches

off automatically after 30 minutes.

9

English

Note: This appliance can only be used without

cord.

When the battery is fully charged, all lights of the

battery charge indicator light up white

continuously.

Battery low

When the battery is almost empty, the bottom light

of the battery charge indicator flashes orange. At

this point there is enough energy left for one

shave.

Remaining battery charge

The remaining battery charge is shown by the

lights of the battery charge indicator that light up

continuously.

’Unplug for use’ reminder

The ‘unplug for use’ symbol flashes to remind you

that you have to disconnect the appliance from

the wall socket before you can switch it on.

10

English

Cleaning reminder

Clean the shaver after every use for optimal

performance (see 'Cleaning and maintenance').

When you switch off the shaver, the cleaning

reminder flashes to remind you to clean the

shaver.

Travel lock

When you are going to travel, you can lock the

shaver to prevent it from accidentally switching on.

Activating the travel lock

3 sec.

1 Press the on/off button for 3 seconds to use

the travel lock mode.

While you activate the travel lock, the travel lock

symbol lights up continuously. When the travel

lock is activated, the travel lock symbol flashes.

If you try to switch on the shaver while the

travel lock is active, the travel lock symbol

flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

While you deactivate the travel lock, the travel

lock symbol lights up briefly and the shaver

produces a short sound.The shaver switches on

and is now ready for use again.

11

English

Replacement reminder

For maximum shaving performance, we advise you

to replace the shaving heads every two years. The

appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The shaving unit symbol and

arrows light up to indicate that you have to replace

the shaving heads.

Note: After replacing the shaving heads, you can

reset the replacement reminder by pressing the

on/off button for 7 seconds. If you do not reset the

replacement reminder, the shaver resets

automatically after 9 shaves.

Turbo setting

The appliance is equipped with a Turbo setting.

This setting is intended for quicker and more

intense shaving and makes hard-to-reach areas

easier to shave.

Activating the Turbo setting

1 To activate the Turbo setting, press the Turbo

button once when the appliance is switched on.

Deactivating the Turbo setting

1 To deactivate the Turbo setting, press the Turbo

button once.

Charging

Charge the shaver before you use it for the first

time and when the display indicates that the

battery is almost empty.

Charging takes approx. 1 hour.

Note: You cannot use the appliance while it is

charging.

12

English

Charging with the supply unit

1 Make sure the appliance is switched off.

2 Put the small plug in the appliance and put the

supply unit in the wall socket.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Note: When the battery is full, the display

switches off automatically after 30 minutes.

Charging in the charging stand

Note: The shaver can also be charged with the

supply unit.

1 Make sure the shaver is switched off.

2 Put the small plug in the charging stand and put

the supply unit in the wall socket.

3 Place the shaver in the charging stand.

4 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

charging stand.

Using the appliance

Note: This appliance can only be used without

cord.

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once.

2 To switch off the appliance, press the on/off

button once.

Battery charge indicator with 3 lights: The display

lights up for a few seconds to show the remaining

battery status.

13

English

Shaving

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week) and

exclusively with this appliance for a period of 3

weeks.

Dry shaving

1 Switch on the appliance.

2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, as this can cause

skin irritation.

3 Clean the appliance after use (see 'Cleaning

and maintenance').

Wet shaving

For a more comfortable shave, you can also use

this appliance on a wet face with shaving foam or

shaving gel.

To shave with shaving foam or shaving gel, follow

the steps below:

1 Apply some water to your skin.

14

English

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face.

7 Clean the appliance after use (see 'Cleaning

and maintenance').

Note: Make sure you rinse all foam or shaving

gel off the appliance.

Turbo setting

The appliance is equipped with a Turbo setting.

This allows you to shave hard-to-reach areas more

quickly.

1 Switch on the appliance.

15

English

2 To activate the Turbo setting, press the Turbo

button once when the appliance is switched on.

3 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Circular movements provide better

shaving results than straight movements.

4 To deactivate the Turbo setting, press the Turbo

button once.

Using the click-on attachments

Removing or attaching click-on attachments

1 Make sure the appliance is switched off.

2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you

pull it off the appliance.

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the precision trimmer attachment

You can use the precision trimmer attachment to

touch up your beard, sideburns and moustache.

16

English

1 Attach the attachment to the appliance (‘click’).

2 Switch on the appliance.

3 Hold the precision trimmer attachment

perpendicular to the skin and move the

appliance downwards while you exert gentle

pressure.

4 Clean the attachment after use.

Using the nose/ear trimmer attachment

You can use the nose/ear trimmer attachment to

trim your nose and/or ear hair.

Trimming nose hair

When trimming nose hair, make sure your nostrils

are clean.

1 Attach the attachment to the appliance (‘click’).

2 Switch on the appliance.

3 Carefully insert the attachment into one of your

nostrils.

Do not insert the attachment more than 0.5cm

into your nostrils.

4 Slowly move the attachment around to remove

all unwanted hairs in your nostrils.

5 Clean the attachment after use.

Trimming ear hair

When trimming ear hair, make sure your outer ear

channels are clean and free from wax.

1 Attach the attachment to the appliance (‘click’).

2 Switch on the appliance.

17

English

3 Slowly move the attachment along the rim of

the ear to remove hairs that stick out beyond

the rim.

4 Insert the attachment into the outer ear

channel.

Do not insert the attachment more than 0.5cm

into your ear channel, as this could damage the

eardrum.

5 Slowly turn the attachment around to remove

all unwanted hairs from your outer ear channel.

6 Clean the attachment after use.

Cleaning and maintenance

Cleaning the shaver under the tap

Clean the shaver after every use for optimal

performance (see 'Cleaning and maintenance').

Be careful with hot water. Always check if the

water is not too hot, to prevent burning your

hands.

Never dry the shaving unit with a towel or tissue,

as this may damage the shaving heads.

While rinsing the shaving unit, water may drip out

of the base of the shaver. This is a normal

occurrence.

1 Switch on the appliance.

2 Rinse the shaving unit under a warm tap.

18

English

3 Switch off the appliance. Press the release

button to open the shaving unit.

4 Rinse the hair chamber under the tap.

5 Rinse the shaving head holder under a warm

tap.

6 Carefully shake off excess water and let the

shaving head holder air-dry completely.

7 Close the shaving head holder ('click').

Cleaning the click-on attachments

Never dry trimmer attachment with a towel or

tissue, as this may damage the trimming teeth.

Cleaning the precision trimmer attachment

Clean the trimmer attachment after each use.

1 Switch on the appliance with the precision

trimmer attachment attached.

19

English

2 Rinse the attachment under a warm tap.

3 After cleaning, switch off the appliance.

4 Carefully shake off excess water and let the

attachment air-dry completely.

For optimal performance, lubricate the teeth of the

attachment with a drop of sewing machine oil

every six months.

Cleaning the nose trimmer attachment

Clean the nose trimmer attachment every time you

have used it.

1 Make sure the appliance is switched off.

2 Rinse the cutting element with hot water.

3 Switch on the appliance and rinse the cutting

element once more to remove any remaining

hairs. Then switch off the appliance again.

4 Carefully shake off excess water and let the

nose trimmer attachment dry.

Tip: For optimal trimmer performance, lubricate

the trimmer teeth with a drop of sewing machine

oil every six months.

Storage

We advise you to let the appliance and its

attachments dry before you put the protection

caps on the attachments or store the shaver in the

pouch.

Store the shaver in the pouch.

20

English

ページが読み込まれています...

Philips S5688/76 ユーザーマニュアル

Philips S5688/76 ユーザーマニュアル

他の言語で

関連論文