Sony HT-Z9F 取扱説明書

E:\#Work#\0405\4727533521\4727533521HTZ9FSP1TW2\00COV-

HTZ9FSP1TW2\170BCO.fm

masterpage: Left

HT-Z9F

4-727-533-52(1)

The software of this system may be updated in the future. To find out details on any available

updates, please visit the following URL.

http://www.sony-asia.com/section/support

F:\#Sagyou\0330\4727533521\4727533521HTZ9FSP1TW2\00COV-

HTZ9FSP1TW2\010COV.fm

masterpage:

Right

HT-Z9F

4-727-533-52(1)

Sound Bar

HT-Z9F

Operating Instructions GB

CT

2

GB

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has been

turned off.

As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in the

unit, disconnect the main plug from the

AC outlet immediately.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

For the Bar Speaker

The nameplate is located on the bottom

of the Bar Speaker.

The operations near the radar system

shall not be influenced.

The directed antenna with high gain

must apply to the fixed point-to-point

system only.

Caution for mounting the Bar

Speaker on a wall

Make sure to use the supplied

wall mounting brackets when

mounting the Bar Speaker on a

wall.

Make sure to use the supplied wall

mounting brackets when mounting the

Bar Speaker on a wall. Do not mount the

Bar Speaker on a wall directly. The

temperature inside of the Bar Speaker

rises considerably, and it may cause

damage or malfunction.

WARNING

3

GB

Table of Contents

What’s in the Box ..........................5

What You Can Do with the

System .....................................6

Guide to Parts and Controls ..........8

About the Home Menu ................ 14

Connecting to a TV or AV

Device

Connecting Sony TV with the

BLUETOOTH Function

Wirelessly .............................. 16

Connecting a TV with an Analog

Audio Cable ........................... 19

Connecting a 4K TV and 4K

Devices ..................................20

Connecting to a Network

Connecting to a Wired

Network ................................. 23

Connecting to a Wireless

Network .................................24

Preparing to Use the System

Mounting the Bar Speaker or Rear

Speaker on a Wall .................26

Attaching the Grille Frame ..........29

Connecting the Subwoofer and Rear

Speakers Wirelessly ..............29

When the TV Remote Control does

not Work ................................ 31

Watching Images

Watching TV ................................ 32

Playing the Connected AV

Device .................................... 32

Listening to Music/Sound

Listening to Music/Sound with the

BLUETOOTH® Function ..........34

Listening to Music on a USB

Device ....................................36

Listening to Music on your PC via a

Home Network ...................... 37

Listening to the Device Connected

with an Analog Audio

Cable ......................................38

Using Spotify ................................39

Using the MUSIC SERVICE

Button ....................................39

Using Chromecast built-in ...........40

Listening to Music on the Mobile

Device with Sony | Music

Center .................................... 41

Connecting the Wireless Multi

Room-Compatible Device

(Wireless Multi Room) ...........42

Listening to Sound of the

Connected TV or Device from

Headphones ..........................43

Adjusting the Sound Quality

Enjoying Immersive Surround

Experience (VERTICAL S.) ......45

Setting the Sound Effect that is

Tailored to Sound Sources

(Sound Mode) ........................46

Making Dialogs Clearer

(VOICE) ...................................47

Enjoying Clear Sound with Low

Volume at Midnight

(NIGHT) ..................................47

Adjusting the Volume of the

Subwoofer and Rear

Speakers ................................48

Adjusting the Delay Between the

Picture and Sound .................49

Connecting to a

TV or AV Device

with the HDMI

Cable



Startup Guide

(separate

document)

GB

4

GB

Playing Compressed Audio Files or

CDs by Upscaling to Near Hi-

Resolution Sound Quality

(DSEE HX) .............................. 50

Enjoying Multiplex Broadcast Sound

(AUDIO) ................................. 50

Using the Control for HDMI

Function

Using the Control for HDMI

Function .................................52

Using the “BRAVIA” Sync

Function ................................ 54

Changing the Settings

Customizing the Speaker Settings

for Surround Sound .............. 55

Changing the Brightness of the

Front Panel Display and

BLUETOOTH Indicator

(DIMMER) .............................. 56

Saving Power in Standby

Mode ......................................57

Performing Easy Setup ................57

Performing Advanced

Settings ................................. 58

Updating the Software ............... 63

Troubleshooting

Troubleshooting .......................... 64

Resetting the System ...................73

Additional Information

Specifications ...............................74

Playable Types of Audio Files ......76

Supported Input Audio

Formats ..................................77

Supported HDMI Video

Formats ..................................78

On BLUETOOTH

Communication .................... 80

END USER LICENSE

AGREEMENT ...........................81

Precautions ................................. 85

Index ............................................ 89

5

GB

What’s in the Box

•Bar Speaker (1)

•Grille frame (1)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• HDMI cable (supports the specification

equal to Premium High Speed HDMI

Cable with Ethernet) (1)

• WALL MOUNT TEMPLATE (1)

• Wall mounting bracket (2), Screw (2)

•Startup Guide

• Operating Instructions

6

GB

What You Can Do with the System

“Listening to Music

on a USB Device”

(page 36)

Blu-ray Disc™ player, cable

box, satellite box, etc.

“Using the Control for HDMI

Function” (page 52)

“Using the “BRAVIA” Sync

Function” (page 54)

“Connecting the Subwoofer

and Rear Speakers Wirelessly”

(page 29)

“Watching TV” (page 32)

“Playing the Connected AV

Device” (page 32)

Basic connection: Refer to

“Startup Guide” (separate

document).

Other connections: See

“Connecting to a TV or AV

Device” (page 16).

“Connecting Sony TV

with the BLUETOOTH

Function Wirelessly”

(page 16)

Rear speakers

(not supplied)

The system supports object-based audio formats such as Dolby Atmos and

DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision.

“Using Spotify”

(page 39)*

“Using the MUSIC

SERVICE Button”

(page 39)

* This service may not be available in

some countries/regions.

* To play on the system, you need the

Spotify Premium account.

7

GB

“Listening to Music/Sound with the

BLUETOOTH® Function” (page 34)

“Listening to Music on the Mobile

Device with Sony | Music Center”

(page 41)

“Listening to Sound of the Connected

TV or Device from Headphones”

(page 43)

“Connecting to a Wired

Network” (page 23)

Internet

Router

Modem

Wireless LAN router

“Connecting to a Wireless

Network” (page 24)

“Listening to Music on your PC via a

Home Network” (page 37)

“Connecting the Wireless Multi Room-

Compatible Device (Wireless Multi

Room)” (page 42)

8

GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 (power) button

Turns on the system or sets it to

standby mode.

 (input select) button

Selects the input for playback on the

system.

 BLUETOOTH button (page 34)

 (MUSIC SERVICE) button

(page 39)

This button may not be available

in some countries/regions.

 +/– (volume) buttons

 BLUETOOTH indicator

– Flashes quickly in blue: During

pairing standby status

– Flashes in blue: BLUETOOTH

connection is being attempted.

– Lights in blue: BLUETOOTH

connection has been established.

 Front panel display

 Remote control sensor

Point the remote control at the

remote control sensor to operate

the system.

Bar Speaker (Main Unit)

9

GB

Rear

 LAN(100) port

 HDMI IN 2 jack

For specifications and notes on

connections, see “Supported

HDMI Video Formats” (page 78).

 HDMI IN 1 jack

For specifications and notes on

connections, see “Supported

HDMI Video Formats” (page 78).

 HDMI OUT (TV (ARC)) jack

Connect a TV that has an HDMI

input jack with an HDMI cable.

The system is compatible with

Audio Return Channel (ARC). ARC

is the function that sends TV

sound to an AV device such as the

system from the TV’s HDMI jack.

For specifications and notes on

connections, see “Supported

HDMI Video Formats” (page 78).

 (USB) port (page 36)

 ANALOG IN jack

 TV IN (OPT) jack

 IR repeater (page 31)

Transmits the remote signal of

the TV remote control to the TV.

10

GB

 Power indicator

– Flashes slowly in green: The

subwoofer is not connected to the

system.

– Lights in green: The subwoofer is

connected to the system.

– Flashes twice repeatedly in green:

The subwoofer is attempting to

connect to the system.

– Flashes/lights in orange: The

software is updating.

– Lights in red: The subwoofer is in

standby mode.

– Turns off: The subwoofer is turned

off.

 (power) button

Turns on or off the subwoofer.

 LINK button (page 30)

 Ventilation holes

For safety, do not block the

ventilation holes.

Subwoofer

11

GB

You can enjoy the surround sound by

connecting two rear speakers (not

supplied).

For connecting, see “Connecting the

Subwoofer and Rear Speakers

Wirelessly” (page 29).

 Power indicator

– Flashes slowly in green: The rear

speaker is not connected to the

system.

– Lights in green: The rear speaker

is connected to the system.

– Flashes twice repeatedly in green:

The rear speaker is attempting to

connect to the system.

– Flashes/lights in orange: The

software is updating.

– Lights in red: The rear speaker is in

standby mode.

– Turns off: The rear speaker is

turned off.

 (power) button

Turns on or off the rear speaker.

 LINK button (page 30)

 Wall mount hole (page 28)

 Mounting hole for the general

speaker stand

Rear Speaker (SA-Z9R) (not supplied)

12

GB

  (power)

Turns on the system or sets it to

standby mode.

BLUETOOTH (page 35)

TV (page 32)

HDMI1 (page 32)

HDMI2 (page 32)

ANALOG (page 38)

USB (page 36)

 AUTO SOUND (page 46)

CINEMA (page 46)

MUSIC (page 46)

GAME (page 46)

NEWS (page 46)

SPORTS (page 46)

STANDARD (page 46)

VOICE (page 47)

VERTICAL S. (page 45)

NIGHT (page 47)

 DIMMER (page 56)

(MUSIC SERVICE) button

(page 39)

This button may not be available

in some countries/regions.

/// (page 14)

(enter) (page 14)

BACK (page 14)

OPTIONS (page 32, 49)

Displays the options menu on the

TV screen.

The options menu is not

displayed for the TV input.

HOME (page 14)

Remote Control

13

GB

 REAR  (rear speakers volume)

+/–

Adjusts the volume of the rear

speakers when connecting rear

speakers (not supplied).

 (volume) +*/–

Adjusts the volume.

SW  (subwoofer volume) +/–

Adjusts the volume of the

subwoofer.

 (muting)

Turns off the sound temporarily.

 DISPLAY

Displays playback information on

the TV screen.

Playback information is not

displayed for the TV input.

 Playback operation buttons

/ (previous/next)

Selects the previous/next track or

file.

Pressing and holding searches

backward or forward (rewind/fast

forward) during playback.

 (play/pause)*

Starts, pauses, or re-starts

playback (resume play).

 AUDIO* (page 50)

*The AUDIO, , and  + buttons have

a tactile dot. Use it as a guide during

operation.

About the replacement of

batteries for the remote control

When the system does not respond by

operating with the remote control,

replace two batteries with new

batteries.

Use R03 (size AAA) manganese

batteries for replacement.

14

GB

About the Home Menu

You can display the home menu on the TV screen by connecting the system and TV

with the HDMI cable (supplied). From the home menu, you can set the various

settings and select the input.

The home menu is displayed in the language that is selected in [Easy Setup]. (The

following screen is an example when English is selected.)

1 Press HOME.

The home menu appears on the TV screen.

2 Press // to select the category that you want, then press  or .

The items for the selected category appear under the category list on the

TV screen.

3 Press /// to select the item that you want, then press .

The selected input or setting display appears on the TV screen.

To return to the previous screen, press BACK.

[Watch]

Selects the input of the TV or AV device that is connected to the system.

See “Watching Images” (page 32).

Using the Home Menu

Categories

Category items

HOME

BACK

///, (enter)

15

GB

[Listen]

Selects the input of the audio device that is connected to the system or

music service for playing back on the system.

See “Listening to Music/Sound” (page 34).

[Setup]

Performs the basic initial settings by using [Easy Setup] or various advanced

settings of the system.

See “Performing Easy Setup” (page 57) or “Performing Advanced Settings”

(page 58).

If the system detects update information for the system on the network, the

update notification and [Software Update] that performs the software

update appears. See “Updating the Software” (page 63).

In these Operating Instructions, the operations are described as steps that are

operated on the home menu displayed on the TV screen by using the remote control

while the system and TV are connected with the HDMI cable (supplied).

The operating steps that select items on the TV screen by using /// and are

simplified in the following way.

Example: Select [Setup] - [Advanced Settings] on the home menu.

The operation that selects a category and category item by pressing /// and

is expressed as “select.” The category and category item are linked with “-.”

Example: Select [Speaker Settings] - [Manual Speaker Settings].

When repeating the operation that selects an item by pressing /// and , the

selected items are linked with “-.”

Tips

• You can use the buttons on the main unit if they have the same or similar names as those

on the remote control.

• Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the

front panel display.

About the Steps Description

16

GB

Connecting to a TV or AV

Device with the HDMI

Cable

Refer to Startup Guide (separate

document).

For the connection to a 4K TV or 4K

Devices, see “Connecting a 4K TV and 4K

Devices” (page 20)

Connecting Sony TV with

the BLUETOOTH Function

Wirelessly

When using Sony TV* with the

BLUETOOTH function, you can listen to

sound of the TV or device that is

connected to the TV by connecting the

system and TV wirelessly.

* The TV needs to be compatible with

A2DP (Advanced Audio Distribution

Profile) of the BLUETOOTH profile.

• If connecting the system and TV by using

the BLUETOOTH function, you cannot

display the operation screen for the

system such as the home menu on the TV

screen, and use the function of the

system other than the listening function

for the sound of the TV or device that is

connected to the TV.

To use all the functions of the system,

connect the system and TV with the HDMI

cable (supplied). For details about

connections and operations to listen to

TV sound by connecting with the HDMI

cable, refer to Startup Guide (separate

document).

• This function is available only for Sony TV

that is compatible with BLUETOOTH

A2DP.

To connect the system and TV

wirelessly, you need to perform pairing

of the system and TV by using the

BLUETOOTH function.

Pairing is the process required to

mutually register the information on

BLUETOOTH devices to be connected

wirelessly in advance.

Connecting to a TV or AV Device

Notes

Blu-ray Disc player,

cable box, satellite

box, etc.

Listening to TV Sound by

Connecting the System and

TV Wirelessly

TV

BLUETOOTH

button



17

GB

1 Set up the remote control.

2 Turn on the TV.

3 Turn on the system.

4 Press and hold the BLUETOOTH

button on the main unit and TV on

the remote control

simultaneously for 5 seconds.

The system enters the pairing

mode, “BT” appears in the front

panel display, and the BLUETOOTH

indicator flashes quickly.

5 On the TV, search the system by

performing the pairing operation.

The list of the BLUETOOTH devices

that are searched appears on the TV

screen.

For the operation method to pair

the BLUETOOTH device to the TV,

refer to the operating instructions of

the TV.

6 Pair the system and TV by

selecting “HT-Z9F” from the list on

the TV screen.

7 Make sure that the BLUETOOTH

indicator on the main unit lights in

blue and “TV (BT)” appears in the

front panel display.

A connection between the system

and TV has been established.

8 Select the program or input of the

device by using the TV remote

control.

The sound of the displayed image

on the TV screen is output from the

system.

9 Adjust the volume of the system

by using the TV remote control.

When pressing the muting button

on the TV remote control, the sound

is muted temporarily.

• If the TV sound is not output from the

system, press TV and check the status of

the front panel display and indicators on

the Bar Speaker.

– “TV (BT)” appears in the front panel

display: The system and TV are

connected and TV sound is output from

the system.

– The BLUETOOTH indicator flashes

quickly and “BT” appears in the front

panel display: Perform pairing on the

TV.

– “TV” appears in the front panel display:

Perform steps from the start.

• When you connect the system and TV

with the HDMI cable (supplied), the

BLUETOOTH connection is canceled. To

connect the system and TV with the

BLUETOOTH function again, disconnect

the HDMI cable, then perform the

connecting operation from the start.

Notes

18

GB

You can turn the system on/off, adjust

the volume, and mute the sound by

using the TV remote control when

connecting the TV to the system

wirelessly.

1 Turn the TV on with the TV remote

control.

The system is turned on by

interlocking with the TV power, and

TV sound is output from the system.

2 Select the program or input of the

device by using the TV remote

control.

The sound of the displayed image

on the TV screen is output from the

system.

3 Adjust the volume of the system

by using the TV remote control.

When pressing the muting button

on the TV remote control, the sound

is muted temporarily.

Tip

When the TV is turned off, the system is

also turned off by interlocking with the TV

power.

About operations with the

remote control that is supplied

with the system

You can use the following buttons.

You can adjust the volume of the

subwoofer and rear speakers, and

adjust sound quality in addition to

turning the system on/off and adjusting

volume that can be operated by the TV

remote control.

• If you select the input other than TV on

the remote control supplied with the

system, the TV sound is not output from

the system. To output the TV sound, press

TV on the remote control to change to the

TV input.

• During the connecting the TV with the

BLUETOOTH function, the following

remote control buttons do not work.

///, (enter), OPTIONS, HOME,

DISPLAY,  (play/pause), /

(previous/next)

Listening to Sound of the

Paired TV

Notes



SW  +/–

 +/–



REAR  +/–

Sound mode

selecting buttons

VOICE

VERTICAL S.

NIGHT

19

GB

Connecting a TV with an

Analog Audio Cable

To connect the following devices to the

system, connect them via the ANALOG

IN jack on the system.

– TVs that do not have an HDMI jack and

optical digital output jack

– Portable audio devices such as

smartphones and WALKMAN®

For listening to the connected device,

see “Listening to the Device Connected

with an Analog Audio Cable” (page 38).

If the TV’s headphone jack also serves as

an audio output jack, check the audio

output settings of the TV. For details, refer

to the operating instructions of the TV.

Smartphone,

WALKMAN®, other

audio devices, etc.

TV

Analog

audio out

Analog audio cable

(not supplied)

Note

20

GB

Connecting a 4K TV and

4K Devices

All HDMI jacks on the system support 4K

video format and HDCP2.2 (High-

bandwidth Digital Content Protection

System Revision 2.2).

To watch 4K video content, connect the

4K TV and 4K devices to the system via

an HDCP2.2-compatible HDMI jack on

each device.

You can only view 4K video content

through the HDCP2.2-compatible HDMI

jack connection.

 HDMI cable (supplied)

 HDMI cable (not supplied)

Use an HDMI cable which supports the 4K

video format that you want to watch. For

details, see “Supported HDMI Video

Formats” (page 78).

When an HDCP2.2-

Compatible HDMI Jack on

the TV is Labeled with “ARC”

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player,

cable box, satellite

box, etc.

HDCP2.2-

compatible

HDMI jack

TV

ページが読み込まれています...

Sony HT-Z9F 取扱説明書

Sony HT-Z9F 取扱説明書

他の言語で

関連論文

その他のドキュメント