Sony HT-ST5000 取扱説明書

HT-ST5000

4-687-838-64(2)

I:\0186-PC115\ML\4687838642_HT-ST5000_GB-CT\00COV-

HTST5000SP1\010BCO.fm

masterpage: Left

The software of this system may be updated in the future. To find out details on any available

updates, please visit the following URL.

http://www.sony-asia.com/section/support

E:\0711\4687838641\4687838641HTST5000SP1\00COV-

HTST5000SP1\010COV.fm

masterpage:

Right

HT-ST5000

4-687-838-64(1)

HT-ST5000

Operating Instructions

GB

CT

Sound Bar

2

GB

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has been

turned off.

As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in the

unit, disconnect the main plug from the

AC outlet immediately.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

WARNING

3

GB

Table of Contents

What’s in the Box ..........................5

What You Can Do with the

System .....................................6

Guide to Parts and Controls ..........8

About the Home Menu ................ 13

Setup

Connecting a 4K TV and 4K

Devices .................................. 15

Connecting a TV Compatible with

eARC .......................................17

Connecting a TV or Portable Audio

Device via the ANALOG IN

Jack ........................................ 18

Connecting to a Wired

Network ................................. 19

Connecting to a Wireless

Network .................................20

Mounting the Main Unit on a

Wall ........................................22

Attaching the Grille Frame ..........24

Listening to the Sound

Listening to the TV ...................... 25

Listening to the Connected AV

Device .................................... 25

Listening to Music on a USB

Device ....................................26

Selecting the Sound Effect

Setting the Sound Effect that is

Tailored to Sound Sources

(SOUND FIELD) .......................28

Enjoying Clear Sound with Low

Volume at Midnight

(NIGHT) ..................................29

Making Dialogues Clearer

(VOICE) ...................................30

Adjusting the Volume of the

Subwoofer .............................30

Adjusting the Delay Between the

Picture and Sound ................. 31

Adjusting the Dialog Volume While

the DTS:X Content is Played

Back ....................................... 32

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device .................................... 33

Listening to Sound of the

Connected TV or Device from

Headphones ..........................36

Listening to Music/Sound

Using the Network Function

Listening to Music on your PC via a

Home Network ......................38

Listening to Music on the Mobile

Device with Sony | Music

Center ....................................39

Using Chromecast built-in ...........40

Using Spotify ................................ 41

Using the MUSIC SERVICE

Button ....................................42

Connecting the Wireless Multi

Room-Compatible Device

(Wireless Multi Room) ...........43

Using the Various Functions/

Settings

Customizing the Speaker Settings

for Surround Sound ...............44

Performing the Wireless Connection

of the Subwoofer

(SECURE LINK) ........................45

Basic Setup



Startup Guide

(separate

document)

GB

4

GB

Playing Compressed Audio Files or

CDs by Upscaling to Near Hi-

Resolution Sound Quality

(DSEE HX) .............................. 46

Enjoying Multiplex Broadcast Sound

(AUDIO) ..................................47

Deactivating Buttons on the Main

Unit .........................................47

Changing the Brightness of the

Front Panel Display and

BLUETOOTH Indicator

(DIMMER) .............................. 48

Saving Power in Standby

Mode ..................................... 48

Sending the Remote Signal to the

TV via the Main Unit ............. 49

Using the Control for HDMI

Function ................................ 49

Using the “BRAVIA” Sync

Function .................................51

Using the Setup Display ...............53

Options Menu List ....................... 60

Troubleshooting

Troubleshooting ...........................61

Resetting the System .................. 69

Additional Information

Specifications .............................. 70

Power Consumption by the Setting

Value for Each Standby

Mode ......................................72

Playable Types of Audio Files ......73

Supported Input Audio

Formats ..................................74

Supported HDMI Video

Formats ..................................75

On BLUETOOTH

Communication .....................77

END USER LICENSE

AGREEMENT ...........................78

Precautions ................................. 82

Index ............................................ 86

5

GB

What’s in the Box

•Bar Speaker (1)

•Grille frame (1)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• HDMI cable (supports the specification

equal to Premium High Speed HDMI

cable with Ethernet) (1)

• WALL MOUNT TEMPLATE (1)

•Startup Guide

• Operating Instructions

6

GB

What You Can Do with the System

“Listening to Music

on a USB Device”

(page 26)

Blu-ray Disc™ player, cable

box, or satellite box, etc.

“Using the Control for HDMI Function”

(page 49)

“Using the “BRAVIA” Sync Function”

(page 51)

“Performing the Wireless

Connection of the Subwoofer

(SECURE LINK)” (page 45)

“Using Spotify” (page 41)*

“Using the MUSIC SERVICE Button”

(page 42)

“Listening to the TV” (page 25)

“Listening to the Connected AV Device” (page 25)

* This service may not be available in some

countries/regions.

* To play on the system, you need the Spotify

Premium account.

Connecting the TV and other devices

(refer to “Startup Guide” (separate

document) or see “Connecting a TV or

Portable Audio Device via the ANALOG

IN Jack” (page 18).)

7

GB

“Listening to Music from a Mobile

Device” (page 33)

“Listening to Music on the Mobile

Device with Sony | Music Center”

(page 39)

“Listening to Sound of the Connected

TV or Device from Headphones”

(page 36)

“Listening to the Same Music in Different

Rooms (Wireless Multi Room)” (page 43)

“Connecting to a Wired

Network” (page 19)

Internet

Router

Modem

Wireless LAN router

“Connecting to a Wireless

Network” (page 20)

“Listening to Music on your PC via a

Home Network” (page 38)

8

GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 (power) button

Turns on the system or sets it to

standby mode.

 (input select) button

(page 13, 25)

 BLUETOOTH PAIRING button

(page 33)

 (MUSIC SERVICE) button

(page 42)

 +/– (volume) buttons

 (USB) port (page 26)

 N-Mark (page 34)

When using the NFC function, touch

your NFC-compatible device to the

mark.

 Remote control sensor

Point the remote control at the

remote control sensor to operate

the system.

 Front panel display

 BLUETOOTH indicator

– Flashes quickly in blue: During

pairing standby status

– Flashes in blue: BLUETOOTH

connection is being attempted

– Lights in blue: BLUETOOTH

connection has been established

Bar Speaker (Main Unit)

9

GB

Rear

 ANALOG IN jack

 TV IN (OPT) jack

 HDMI OUT (TV (eARC/ARC)) jack

Connect a TV that has an HDMI

input jack with an HDMI cable.

The system is compatible with

eARC and ARC. ARC is the

function that sends TV sound to

an AV device such as the system

from the TV’s HDMI jack. eARC is

an extension of ARC and enables

transmission of the object audio

and multi-channel LPCM content

that cannot be transmitted with

ARC. For details of eARC, see

“Connecting a TV Compatible

with eARC” (page 17). For

supported audio formats, see

“Supported Input Audio Formats”

(page 74). For specifications and

notes on connections, see

“Supported HDMI Video Formats”

(page 75).

 HDMI IN 1 jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

 HDMI IN 2 jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

 HDMI IN 3 jack

For the specifications and note on

connections, see “Supported

HDMI Video Formats” (page 75).

 LAN(100) port

10

GB

 On/standby indicator

– Lights in red: The subwoofer is not

connected to the system

– Lights in green: The subwoofer is

connected to the system

– Lights in orange: The subwoofer is

connected to the system with the

Secure Link function

– Flashes in green: The subwoofer is

attempting to connect to the

system

– Flashes in orange: The subwoofer

is attempting to connect to the

system with the Secure Link

function

– Turns off: The subwoofer is in

standby mode

/ (on/standby) button

Turns on the subwoofer or sets it

to standby mode.

 SECURE LINK button (page 45)

 Ventilation holes

For safety, do not block the

ventilation holes.

Subwoofer

11

GB

 INPUT +/– (page 13, 25)

 (power)

Turns on the system or sets it to

standby mode.

 DISPLAY**

Displays playback information on

the TV screen.

Playback information is not

displayed for TV input.

 CLEAR AUDIO+ (page 28)

SOUND FIELD (page 28)

VOICE (page 30)

NIGHT (page 29)

 DIMMER (page 48)

 Color buttons

Shortcut keys for selecting items

on some menus.

 MUSIC SERVICE (page 42)

BLUETOOTH PAIRING (page 33)

 OPTIONS** (page 31, 60)

Displays the options menu on the

TV screen.

The options menu is not

displayed for the TV input.

BACK (page 13)

/// (page 13)

(enter) (page 13)

HOME (page 13)

 (muting)

Turns off the sound temporarily.

 (volume) +*/–

Adjusts the volume.

SW  (subwoofer volume) +/–

Adjusts the volume of the

subwoofer.

Remote Control

12

GB

 Playback operation buttons

/ (rewind/fast forward)

Searches backward or forward.

/ (previous/next)

Selects the previous/next

chapter, track, or file.

 (play)*

Starts or re-starts playback

(resume play).

 (pause)

Pauses or re-starts playback.

 (stop)

Stops playback.

 BLUETOOTH RX/TX (BLUETOOTH

receiver/transmitter) (page 37)

 AUDIO* (page 47)

*The AUDIO, , and  + buttons have a

tactile dot. Use it as a guide during

operation.

**When watching HDR signal and certain

4K format video, the OPTIONS and

DISPLAY buttons do not work and the

On-Screen Display (OSD) of the system is

not displayed. For details about the 4K

video format, see “Supported HDMI

Video Formats” (page 75).

13

GB

About the Home Menu

You can display the home menu on the TV screen by connecting the system and TV

with the HDMI cable (supplied). From the home menu, you can set the various

settings by selecting [Setup] or select the input or service that you want to watch

from the input list. The home menu is displayed in the language that is selected in

[Easy Setup]. (The following screen is an example when selecting English.)

1 Press HOME.

The home menu appears on the TV screen.

2 Press /// to select [Setup] or an item on the input list, then press

.

The selected input or setup display appears on the TV screen.

To return to the previous screen, press BACK.

Using the Home Menu

[Setup]

Input list

HOME

BACK

///, (enter)

14

GB

Input list

[Setup]

See “Using the Setup Display” (page 53).

Tip

You can also select the input by pressing INPUT +/– repeatedly.

In these Operating Instructions, the operations are described as steps that are

operated on the home menu displayed on the TV screen by using the remote control

while the system and TV are connected with the HDMI cable (supplied).

The operating steps that select items on the TV screen by using /// and are

simplified in the following way.

Example: Select [Setup] from the home menu.

The operation that selects an item by pressing /// and is expressed as

“select.”

Example: Select [Network Settings] - [Internet Settings] - [Wired Setup] on the

home menu.

When repeating the operation that selects an item by pressing /// and , the

selected items are linked with “-.”

Tips

• You can use the buttons on the main unit if they have the same or similar names as those

on the remote control.

• Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the

front panel display.

Input name Explanation

[TV] Outputs the TV sound. (page 25)

[HDMI1] Outputs the sound of device that is connected to the HDMI IN 1

jack. (page 25)

[HDMI2] Outputs the sound of device that is connected to the HDMI IN 2

jack. (page 25)

[HDMI3] Outputs the sound of device that is connected to the HDMI IN 3

jack. (page 25)

[Bluetooth Audio] Outputs the sound of device that is connected with the

BLUETOOTH function. (page 33)

[Analog] Outputs the sound of device that is connected to the ANALOG IN

jack. (page 25)

[USB] Outputs music files stored on a connected USB device. (page 26)

[Home Network] Outputs music files on the device that is connected via the

network. (page 38)

[Music Service List] Displays the operation method for music services. (page 42)

About the Steps Description

15

GB

Setup

Basic Setup

Refer to Startup Guide (separate

document).

Connecting a 4K TV and

4K Devices

All HDMI jacks on the system support 4K

video format and HDCP2.2 (High-

bandwidth Digital Content Protection

System Revision 2.2).

To watch 4K video content, connect the

4K TV and 4K devices to the system via

an HDCP2.2-compatible HDMI jack on

each device.

You can only view 4K video content

through the HDCP2.2-compatible HDMI

jack connection.

 HDMI cable (supplied)

 HDMI cable (not supplied)

Use an HDMI cable which supports the 4K

video format that you want to watch. For

details, see “Supported HDMI Video

Formats” (page 75).

Setup

When an HDCP2.2-

Compatible HDMI Jack on

the TV is Labeled with

“eARC” or “ARC”

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player,

cable box, or

satellite box, etc.

HDCP2.2-

compatible

HDMI jack

TV

16

GB

1 Check which HDMI IN jack on your

TV is compatible with HDCP2.2.

Refer to the operating instructions

of the TV.

2 Connect the HDCP2.2-compatible

HDMI IN jack on the TV and HDMI

OUT jack on the main unit with the

HDMI cable (supplied).

TV connection is completed.

3 Connect the HDCP2.2-compatible

HDMI OUT jack of the 4K device

and HDMI IN jack of the main unit

with the HDMI cable (not

supplied).

Refer to the operating instructions

of the 4K device to check that the

HDMI OUT jack of the 4K device is

compatible with HDCP2.2.

4K device connection is completed.

If your TV’s HDCP2.2-compatible HDMI

IN jack is not compatible with eARC or

ARC, the TV sound is not output from

the system.

In this case, connect the optical output

jack of the TV and the TV IN (OPT) jack on

the main unit with the optical digital

cable (not supplied).

 HDMI cable (supplied)

 HDMI cable (not supplied)

Use an HDMI cable which supports the 4K

video format that you want to watch. For

details, see “Supported HDMI Video

Formats” (page 75).

 Optical digital cable (not supplied)

When an HDCP2.2-

Compatible HDMI Jack on

the TV is not Labeled with

“eARC” or “ARC”

HDCP2.2-

compatible

HDMI jack

Blu-ray Disc player,

cable box, or

satellite box, etc.

HDCP2.2-

compatible

HDMI jack

TV

17

GB

Setup

To watch 4K video content, select the

appropriate setting for the connected

4K TV and 4K device.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [System Settings] - [HDMI

Settings] - [HDMI Signal Format].

4 Select the setting you want.

• [Standard format] (default

setting): Select when the

connected TV and devices support

standard bandwidth video

formats.

• [Enhanced format]: Select when

both the connected TV and

devices support high bandwidth

video formats such as 4K 60p

4:4:4 etc.

For the relation of the [HDMI Signal

Format] setting options, supported

video format signals, and HDMI

cables to be used, see “Supported

HDMI Video Formats” (page 75).

• Depending on the TV, the TV setting for

HDMI output may be required. Refer to

the operating instructions of the TV.

• When the picture is not displayed after

[HDMI Signal Format] is set to [Enhanced

format], set it to [Standard format].

Connecting a TV

Compatible with eARC

The system is compatible with eARC

(Enhanced Audio Return Channel). eARC

is a new function standardized by HDMI

2.1 and supports latest audio formats in

addition to audio formats that are

supported with existing ARC (Audio

Return Channel).

You can enjoy object audio content,

such as Dolby Atmos - Dolby TrueHD

and DTS:X, or multi-channel LPCM

content that cannot be transmitted with

ARC by connecting the system and TV

compatible with eARC using an HDMI

cable.

For the connection, refer to Startup

Guide (separate document).

1 If the HDMI output jack of the

system is labeled with “ARC,”

perform a software update

(page 54).

The system is compatible with the

eARC function if the HDMI output

jack of the system is labeled with

“eARC/ARC.”

2 Press HOME.

The home menu appears on the TV

screen.

3 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

Setting the HDMI Signal

Format to Watch 4K Video

Content

Notes

Preparing to Use the eARC

Function

18

GB

4 Select [System Settings] - [HDMI

Settings] - [eARC] - [On].

The eARC function is enabled and it

works while connecting a TV

compatible with eARC.

The ARC function works while

connecting a TV compatible with

ARC (not compatible with eARC).

• If [eARC] does not appear on the setup

display in step 4, perform a software

update (page 54).

• When [eARC] is set to [On], make sure of

the eARC setting of the connected TV. For

details, refer to the operating instructions

of the TV.

Connecting a TV or

Portable Audio Device

via the ANALOG IN Jack

To connect following devices to the

system, connect them via the ANALOG

IN jack on the system.

– TV that does not have an HDMI jack

and optical digital output jack

– Portable audio device such as a

smartphone, WALKMAN®

If the TV’s headphone jack also serves as

an audio output jack, check the audio

output settings of the TV. For details, refer

to the operating instructions of the TV.

Notes

Note

Smartphone,

WALKMAN®, other

audio devices etc.

TV

Analog

audio out

Analog audio cable

(not supplied)

19

GB

Setup

Connecting to a Wired

Network

Prepare the network by connecting the

system and PC to your home network

with a LAN cable.

The following illustration is the example

for connection of the system and PC to

your home network.

The server needs to be connected to the

same network as that of the system.

Tip

We recommend that you use a shielded

straight interface cable (not supplied).

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Auto].

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

5 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Manual].

Connecting to a PC or Router

with a LAN Cable

Note

Internet

LAN cable

(not supplied)

Server

Router

Modem

Connecting by Obtaining

the Network Information

Automatically

Connecting by Using a

Fixed IP Address

20

GB

5 Perform the setting by following

the on-screen instructions.

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

6 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

Connecting to a Wireless

Network

Prepare the network by connecting the

system and PC to your wireless LAN

router.

The server needs to be connected to the

same network as that of the system.

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the

network settings with the WPS button.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless

Setup] - [Wi-Fi Protected Setup™

(WPS)].

4 Select [Start].

5 Press the WPS button on the

access point.

The system starts connecting to the

network.

Note

Connecting with the WPS

Button

ページが読み込まれています...

Sony HT-ST5000 取扱説明書

Sony HT-ST5000 取扱説明書

他の言語で

関連論文

その他のドキュメント