Sony HT-Z9F 取扱説明書

タイプ
取扱説明書
E:\#Work#\0405\4727533521\4727533521HTZ9FSP1TW2\00COV-
HTZ9FSP1TW2\170BCO.fm
masterpage: Left
©2018 Sony Corporation Printed in Malaysia 4-727-533-52(1)
HT-Z9F
4-727-533-52(1)
The software of this system may be updated in the future. To find out details on any available
updates, please visit the following URL.
http://www.sony-asia.com/section/support
F:\#Sagyou\0330\4727533521\4727533521HTZ9FSP1TW2\00COV-
HTZ9FSP1TW2\010COV.fm
masterpage:
Right
HT-Z9F
4-727-533-52(1)
Sound Bar
HT-Z9F
Operating Instructions GB
CT
2
GB
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
To reduce the risk of fire, do not cover
the ventilation opening of the appliance
with newspapers, tablecloths, curtains,
etc.
Do not expose the appliance to naked
flame sources (for example, lighted
candles).
To reduce the risk of fire or electric
shock, do not expose this appliance to
dripping or splashing, and do not place
objects filled with liquids, such as vases,
on the appliance.
The unit is not disconnected from the
mains as long as it is connected to the
AC outlet, even if the unit itself has been
turned off.
As the main plug is used to disconnect
the unit from the mains, connect the
unit to an easily accessible AC outlet.
Should you notice an abnormality in the
unit, disconnect the main plug from the
AC outlet immediately.
Do not expose batteries or appliances
with battery-installed to excessive heat,
such as sunshine and fire.
Indoor use only.
Recommended cables
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals.
For the Bar Speaker
The nameplate is located on the bottom
of the Bar Speaker.
The operations near the radar system
shall not be influenced.
The directed antenna with high gain
must apply to the fixed point-to-point
system only.
Caution for mounting the Bar
Speaker on a wall
Make sure to use the supplied
wall mounting brackets when
mounting the Bar Speaker on a
wall.
Make sure to use the supplied wall
mounting brackets when mounting the
Bar Speaker on a wall. Do not mount the
Bar Speaker on a wall directly. The
temperature inside of the Bar Speaker
rises considerably, and it may cause
damage or malfunction.
WARNING
3
GB
Table of Contents
What’s in the Box ..........................5
What You Can Do with the
System .....................................6
Guide to Parts and Controls ..........8
About the Home Menu ................ 14
Connecting to a TV or AV
Device
Connecting Sony TV with the
BLUETOOTH Function
Wirelessly .............................. 16
Connecting a TV with an Analog
Audio Cable ........................... 19
Connecting a 4K TV and 4K
Devices ..................................20
Connecting to a Network
Connecting to a Wired
Network ................................. 23
Connecting to a Wireless
Network .................................24
Preparing to Use the System
Mounting the Bar Speaker or Rear
Speaker on a Wall .................26
Attaching the Grille Frame ..........29
Connecting the Subwoofer and Rear
Speakers Wirelessly ..............29
When the TV Remote Control does
not Work ................................ 31
Watching Images
Watching TV ................................ 32
Playing the Connected AV
Device .................................... 32
Listening to Music/Sound
Listening to Music/Sound with the
BLUETOOTH® Function ..........34
Listening to Music on a USB
Device ....................................36
Listening to Music on your PC via a
Home Network ...................... 37
Listening to the Device Connected
with an Analog Audio
Cable ......................................38
Using Spotify ................................39
Using the MUSIC SERVICE
Button ....................................39
Using Chromecast built-in ...........40
Listening to Music on the Mobile
Device with Sony | Music
Center .................................... 41
Connecting the Wireless Multi
Room-Compatible Device
(Wireless Multi Room) ...........42
Listening to Sound of the
Connected TV or Device from
Headphones ..........................43
Adjusting the Sound Quality
Enjoying Immersive Surround
Experience (VERTICAL S.) ......45
Setting the Sound Effect that is
Tailored to Sound Sources
(Sound Mode) ........................46
Making Dialogs Clearer
(VOICE) ...................................47
Enjoying Clear Sound with Low
Volume at Midnight
(NIGHT) ..................................47
Adjusting the Volume of the
Subwoofer and Rear
Speakers ................................48
Adjusting the Delay Between the
Picture and Sound .................49
Connecting to a
TV or AV Device
with the HDMI
Cable
Startup Guide
(separate
document)
GB
4
GB
Playing Compressed Audio Files or
CDs by Upscaling to Near Hi-
Resolution Sound Quality
(DSEE HX) .............................. 50
Enjoying Multiplex Broadcast Sound
(AUDIO) ................................. 50
Using the Control for HDMI
Function
Using the Control for HDMI
Function .................................52
Using the “BRAVIA” Sync
Function ................................ 54
Changing the Settings
Customizing the Speaker Settings
for Surround Sound .............. 55
Changing the Brightness of the
Front Panel Display and
BLUETOOTH Indicator
(DIMMER) .............................. 56
Saving Power in Standby
Mode ......................................57
Performing Easy Setup ................57
Performing Advanced
Settings ................................. 58
Updating the Software ............... 63
Troubleshooting
Troubleshooting .......................... 64
Resetting the System ...................73
Additional Information
Specifications ...............................74
Playable Types of Audio Files ......76
Supported Input Audio
Formats ..................................77
Supported HDMI Video
Formats ..................................78
On BLUETOOTH
Communication .................... 80
END USER LICENSE
AGREEMENT ...........................81
Precautions ................................. 85
Index ............................................ 89
5
GB
What’s in the Box
•Bar Speaker (1)
•Grille frame (1)
•Subwoofer (1)
• Remote control (1)
R03 (size AAA) battery (2)
HDMI cable (supports the specification
equal to Premium High Speed HDMI
Cable with Ethernet) (1)
• WALL MOUNT TEMPLATE (1)
Wall mounting bracket (2), Screw (2)
•Startup Guide
• Operating Instructions
6
GB
What You Can Do with the System
“Listening to Music
on a USB Device”
(page 36)
Blu-ray Disc™ player, cable
box, satellite box, etc.
“Using the Control for HDMI
Function” (page 52)
“Using the “BRAVIA” Sync
Function” (page 54)
“Connecting the Subwoofer
and Rear Speakers Wirelessly”
(page 29)
“Watching TV” (page 32)
“Playing the Connected AV
Device” (page 32)
Basic connection: Refer to
“Startup Guide” (separate
document).
Other connections: See
“Connecting to a TV or AV
Device” (page 16).
“Connecting Sony TV
with the BLUETOOTH
Function Wirelessly”
(page 16)
Rear speakers
(not supplied)
The system supports object-based audio formats such as Dolby Atmos and
DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision.
“Using Spotify
(page 39)*
“Using the MUSIC
SERVICE Button
(page 39)
* This service may not be available in
some countries/regions.
* To play on the system, you need the
Spotify Premium account.
7
GB
“Listening to Music/Sound with the
BLUETOOTH® Function” (page 34)
“Listening to Music on the Mobile
Device with Sony | Music Center”
(page 41)
“Listening to Sound of the Connected
TV or Device from Headphones”
(page 43)
“Connecting to a Wired
Network” (page 23)
Internet
Router
Modem
Wireless LAN router
“Connecting to a Wireless
Network” (page 24)
“Listening to Music on your PC via a
Home Network” (page 37)
“Connecting the Wireless Multi Room-
Compatible Device (Wireless Multi
Room)” (page 42)
8
GB
Guide to Parts and Controls
Details are omitted from the illustrations.
Front
 (power) button
Turns on the system or sets it to
standby mode.
(input select) button
Selects the input for playback on the
system.
BLUETOOTH button (page 34)
(MUSIC SERVICE) button
(page 39)
This button may not be available
in some countries/regions.
+/– (volume) buttons
BLUETOOTH indicator
– Flashes quickly in blue: During
pairing standby status
– Flashes in blue: BLUETOOTH
connection is being attempted.
– Lights in blue: BLUETOOTH
connection has been established.
Front panel display
Remote control sensor
Point the remote control at the
remote control sensor to operate
the system.
Bar Speaker (Main Unit)
9
GB
Rear
LAN(100) port
HDMI IN 2 jack
For specifications and notes on
connections, see “Supported
HDMI Video Formats” (page 78).
HDMI IN 1 jack
For specifications and notes on
connections, see “Supported
HDMI Video Formats” (page 78).
HDMI OUT (TV (ARC)) jack
Connect a TV that has an HDMI
input jack with an HDMI cable.
The system is compatible with
Audio Return Channel (ARC). ARC
is the function that sends TV
sound to an AV device such as the
system from the TV’s HDMI jack.
For specifications and notes on
connections, see “Supported
HDMI Video Formats” (page 78).
(USB) port (page 36)
ANALOG IN jack
TV IN (OPT) jack
IR repeater (page 31)
Transmits the remote signal of
the TV remote control to the TV.
10
GB
Power indicator
– Flashes slowly in green: The
subwoofer is not connected to the
system.
– Lights in green: The subwoofer is
connected to the system.
Flashes twice repeatedly in green:
The subwoofer is attempting to
connect to the system.
– Flashes/lights in orange: The
software is updating.
– Lights in red: The subwoofer is in
standby mode.
Turns off: The subwoofer is turned
off.
 (power) button
Turns on or off the subwoofer.
LINK button (page 30)
Ventilation holes
For safety, do not block the
ventilation holes.
Subwoofer
11
GB
You can enjoy the surround sound by
connecting two rear speakers (not
supplied).
For connecting, see “Connecting the
Subwoofer and Rear Speakers
Wirelessly” (page 29).
Power indicator
– Flashes slowly in green: The rear
speaker is not connected to the
system.
– Lights in green: The rear speaker
is connected to the system.
Flashes twice repeatedly in green:
The rear speaker is attempting to
connect to the system.
– Flashes/lights in orange: The
software is updating.
Lights in red: The rear speaker is in
standby mode.
– Turns off: The rear speaker is
turned off.
 (power) button
Turns on or off the rear speaker.
LINK button (page 30)
Wall mount hole (page 28)
Mounting hole for the general
speaker stand
Rear Speaker (SA-Z9R) (not supplied)
12
GB
(power)
Turns on the system or sets it to
standby mode.
BLUETOOTH (page 35)
TV (page 32)
HDMI1 (page 32)
HDMI2 (page 32)
ANALOG (page 38)
USB (page 36)
AUTO SOUND (page 46)
CINEMA (page 46)
MUSIC (page 46)
GAME (page 46)
NEWS (page 46)
SPORTS (page 46)
STANDARD (page 46)
VOICE (page 47)
VERTICAL S. (page 45)
NIGHT (page 47)
DIMMER (page 56)
(MUSIC SERVICE) button
(page 39)
This button may not be available
in some countries/regions.
/// (page 14)
(enter) (page 14)
BACK (page 14)
OPTIONS (page 32, 49)
Displays the options menu on the
TV screen.
The options menu is not
displayed for the TV input.
HOME (page 14)
Remote Control
13
GB
REAR (rear speakers volume)
+/–
Adjusts the volume of the rear
speakers when connecting rear
speakers (not supplied).
(volume) +*/
Adjusts the volume.
SW (subwoofer volume) +/–
Adjusts the volume of the
subwoofer.
(muting)
Turns off the sound temporarily.
DISPLAY
Displays playback information on
the TV screen.
Playback information is not
displayed for the TV input.
Playback operation buttons
/ (previous/next)
Selects the previous/next track or
file.
Pressing and holding searches
backward or forward (rewind/fast
forward) during playback.
 (play/pause)*
Starts, pauses, or re-starts
playback (resume play).
AUDIO* (page 50)
*The AUDIO, , and + buttons have
a tactile dot. Use it as a guide during
operation.
About the replacement of
batteries for the remote control
When the system does not respond by
operating with the remote control,
replace two batteries with new
batteries.
Use R03 (size AAA) manganese
batteries for replacement.
14
GB
About the Home Menu
You can display the home menu on the TV screen by connecting the system and TV
with the HDMI cable (supplied). From the home menu, you can set the various
settings and select the input.
The home menu is displayed in the language that is selected in [Easy Setup]. (The
following screen is an example when English is selected.)
1 Press HOME.
The home menu appears on the TV screen.
2 Press // to select the category that you want, then press or .
The items for the selected category appear under the category list on the
TV screen.
3 Press /// to select the item that you want, then press .
The selected input or setting display appears on the TV screen.
To return to the previous screen, press BACK.
[Watch]
Selects the input of the TV or AV device that is connected to the system.
See “Watching Images” (page 32).
Using the Home Menu
Categories
Category items
HOME
BACK
///, (enter)
15
GB
[Listen]
Selects the input of the audio device that is connected to the system or
music service for playing back on the system.
See “Listening to Music/Sound” (page 34).
[Setup]
Performs the basic initial settings by using [Easy Setup] or various advanced
settings of the system.
See “Performing Easy Setup” (page 57) or “Performing Advanced Settings”
(page 58).
If the system detects update information for the system on the network, the
update notification and [Software Update] that performs the software
update appears. See “Updating the Software” (page 63).
In these Operating Instructions, the operations are described as steps that are
operated on the home menu displayed on the TV screen by using the remote control
while the system and TV are connected with the HDMI cable (supplied).
The operating steps that select items on the TV screen by using /// and are
simplified in the following way.
Example: Select [Setup] - [Advanced Settings] on the home menu.
The operation that selects a category and category item by pressing /// and
is expressed as “select.” The category and category item are linked with “-.”
Example: Select [Speaker Settings] - [Manual Speaker Settings].
When repeating the operation that selects an item by pressing /// and , the
selected items are linked with “-.
Tips
You can use the buttons on the main unit if they have the same or similar names as those
on the remote control.
Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the
front panel display.
About the Steps Description
16
GB
Connecting to a TV or AV
Device with the HDMI
Cable
Refer to Startup Guide (separate
document).
For the connection to a 4K TV or 4K
Devices, see “Connecting a 4K TV and 4K
Devices” (page 20)
Connecting Sony TV with
the BLUETOOTH Function
Wirelessly
When using Sony TV* with the
BLUETOOTH function, you can listen to
sound of the TV or device that is
connected to the TV by connecting the
system and TV wirelessly.
* The TV needs to be compatible with
A2DP (Advanced Audio Distribution
Profile) of the BLUETOOTH profile.
If connecting the system and TV by using
the BLUETOOTH function, you cannot
display the operation screen for the
system such as the home menu on the TV
screen, and use the function of the
system other than the listening function
for the sound of the TV or device that is
connected to the TV.
To use all the functions of the system,
connect the system and TV with the HDMI
cable (supplied). For details about
connections and operations to listen to
TV sound by connecting with the HDMI
cable, refer to Startup Guide (separate
document).
This function is available only for Sony TV
that is compatible with BLUETOOTH
A2DP.
To connect the system and TV
wirelessly, you need to perform pairing
of the system and TV by using the
BLUETOOTH function.
Pairing is the process required to
mutually register the information on
BLUETOOTH devices to be connected
wirelessly in advance.
Connecting to a TV or AV Device
Notes
Blu-ray Disc player,
cable box, satellite
box, etc.
Listening to TV Sound by
Connecting the System and
TV Wirelessly
TV
BLUETOOTH
button
17
GB
1 Set up the remote control.
2 Turn on the TV.
3 Turn on the system.
4 Press and hold the BLUETOOTH
button on the main unit and TV on
the remote control
simultaneously for 5 seconds.
The system enters the pairing
mode, “BT” appears in the front
panel display, and the BLUETOOTH
indicator flashes quickly.
5 On the TV, search the system by
performing the pairing operation.
The list of the BLUETOOTH devices
that are searched appears on the TV
screen.
For the operation method to pair
the BLUETOOTH device to the TV,
refer to the operating instructions of
the TV.
6 Pair the system and TV by
selecting “HT-Z9F” from the list on
the TV screen.
7 Make sure that the BLUETOOTH
indicator on the main unit lights in
blue and “TV (BT)” appears in the
front panel display.
A connection between the system
and TV has been established.
8 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
system.
9 Adjust the volume of the system
by using the TV remote control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
If the TV sound is not output from the
system, press TV and check the status of
the front panel display and indicators on
the Bar Speaker.
“TV (BT)” appears in the front panel
display: The system and TV are
connected and TV sound is output from
the system.
The BLUETOOTH indicator flashes
quickly and “BT” appears in the front
panel display: Perform pairing on the
TV.
“TV” appears in the front panel display:
Perform steps from the start.
When you connect the system and TV
with the HDMI cable (supplied), the
BLUETOOTH connection is canceled. To
connect the system and TV with the
BLUETOOTH function again, disconnect
the HDMI cable, then perform the
connecting operation from the start.
Notes
18
GB
You can turn the system on/off, adjust
the volume, and mute the sound by
using the TV remote control when
connecting the TV to the system
wirelessly.
1 Turn the TV on with the TV remote
control.
The system is turned on by
interlocking with the TV power, and
TV sound is output from the system.
2 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
system.
3 Adjust the volume of the system
by using the TV remote control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Tip
When the TV is turned off, the system is
also turned off by interlocking with the TV
power.
About operations with the
remote control that is supplied
with the system
You can use the following buttons.
You can adjust the volume of the
subwoofer and rear speakers, and
adjust sound quality in addition to
turning the system on/off and adjusting
volume that can be operated by the TV
remote control.
If you select the input other than TV on
the remote control supplied with the
system, the TV sound is not output from
the system. To output the TV sound, press
TV on the remote control to change to the
TV input.
During the connecting the TV with the
BLUETOOTH function, the following
remote control buttons do not work.
///, (enter), OPTIONS, HOME,
DISPLAY,  (play/pause), /
(previous/next)
Listening to Sound of the
Paired TV
Notes
SW +/–
+/–
REAR +/–
Sound mode
selecting buttons
VOICE
VERTICAL S.
NIGHT
19
GB
Connecting a TV with an
Analog Audio Cable
To connect the following devices to the
system, connect them via the ANALOG
IN jack on the system.
TVs that do not have an HDMI jack and
optical digital output jack
– Portable audio devices such as
smartphones and WALKMAN®
For listening to the connected device,
see “Listening to the Device Connected
with an Analog Audio Cable” (page 38).
If the TV’s headphone jack also serves as
an audio output jack, check the audio
output settings of the TV. For details, refer
to the operating instructions of the TV.
Smartphone,
WALKMAN®, other
audio devices, etc.
TV
Analog
audio out
Analog audio cable
(not supplied)
Note
20
GB
Connecting a 4K TV and
4K Devices
All HDMI jacks on the system support 4K
video format and HDCP2.2 (High-
bandwidth Digital Content Protection
System Revision 2.2).
To watch 4K video content, connect the
4K TV and 4K devices to the system via
an HDCP2.2-compatible HDMI jack on
each device.
You can only view 4K video content
through the HDCP2.2-compatible HDMI
jack connection.
HDMI cable (supplied)
HDMI cable (not supplied)
Use an HDMI cable which supports the 4K
video format that you want to watch. For
details, see “Supported HDMI Video
Formats” (page 78).
When an HDCP2.2-
Compatible HDMI Jack on
the TV is Labeled with “ARC”
HDCP2.2-
compatible
HDMI jack
Blu-ray Disc player,
cable box, satellite
box, etc.
HDCP2.2-
compatible
HDMI jack
TV
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175

Sony HT-Z9F 取扱説明書

タイプ
取扱説明書

他の言語で