Sony HT-X9000F 取扱説明書

タイプ
取扱説明書
E:\#Work#\1106\00COV-HTX9000FSP1TW2\170BCO.fm masterpage: Left
©2018 Sony Corporation Printed in Malaysia 4-725-865-51(1)
http://www.sony.net/
HT-X9000F
4-725-865-51(1)
The software of this system may be updated in the future. To find out details on any available
updates, please visit the following URL.
http://www.sony-asia.com/section/support
HT-X9000F
4-725-865-51(1)
F:\#Sagyou\0126\4725865511\4725865511HTX9000FSP1\00COV-
HTX9000FSP1TW2\010COV.fm
masterpage:
Right
Sound Bar
HT-X9000F
Operating Instructions GB
CT
2
GB
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
To reduce the risk of fire, do not cover
the ventilation opening of the appliance
with newspapers, tablecloths, curtains,
etc.
Do not expose the appliance to naked
flame sources (for example, lighted
candles).
To reduce the risk of fire or electric
shock, do not expose this appliance to
dripping or splashing, and do not place
objects filled with liquids, such as vases,
on the appliance.
The unit is not disconnected from the
mains as long as it is connected to the
AC outlet, even if the unit itself has been
turned off.
As the main plug is used to disconnect
the unit from the mains, connect the
unit to an easily accessible AC outlet.
Should you notice an abnormality in the
unit, disconnect the main plug from the
AC outlet immediately.
Do not expose batteries or appliances
with battery-installed to excessive heat,
such as sunshine and fire.
Indoor use only.
Recommended cables
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals.
For the Bar Speaker
The nameplate is located on the bottom
of the Bar Speaker.
WARNING
3
GB
Table of Contents
What’s in the Box ..........................5
What You Can Do with the
System .....................................6
Guide to Parts and Controls .......... 7
About the Home Menu .................12
Connecting to a TV or AV
Device
Connecting Sony TV with the
BLUETOOTH Function
Wirelessly .............................. 14
Connecting a TV with an Analog
Audio Cable ............................17
Connecting a 4K TV and 4K
Devices .................................. 18
Preparing to Use the System
Mounting the Bar Speaker on a
Wall .........................................21
Performing the Wireless Connection
of the Subwoofer
(SECURE LINK) ........................ 23
When the TV Remote Control does
not Work ................................ 24
Watching Images
Watching TV ................................25
Playing the Connected AV
Device ....................................25
Listening to Music/Sound
Listening to Music/Sound with the
BLUETOOTH® Function ..........26
Listening to Music on a USB
Device ....................................28
Listening to the Device Connected
with an Analog Audio
Cable ......................................29
Adjusting the Sound Quality
Enjoying Immersive Surround
Experience (VERTICAL S.) ......30
Setting the Sound Effect that is
Tailored to Sound Sources
(Sound Mode) ........................ 31
Making Dialogs Clearer
(VOICE) ................................... 32
Enjoying Clear Sound with Low
Volume at Midnight
(NIGHT) .................................. 32
Adjusting the Volume of the
Subwoofer ............................. 33
Adjusting the Delay Between the
Picture and Sound .................33
Playing Compressed Audio Files or
CDs in Natural Sound Quality
(DSEE) ....................................35
Enjoying Multiplex Broadcast Sound
(AUDIO) ..................................35
Using the Control for HDMI
Function
Using the Control for HDMI
Function ................................. 37
Using the “BRAVIA” Sync
Function .................................39
Changing the Settings
Customizing the Speaker Settings
for Surround Sound ...............40
Changing the Brightness of the
Indicators (DIMMER) .............. 41
Saving Power in Standby
Mode ..................................... 41
Performing Easy Setup ................42
Performing Advanced Settings ...43
Updating the Software ................46
Connecting to a
TV or AV Device
with the HDMI
Cable
Startup Guide
(separate
document)
GB
4
GB
Troubleshooting
Troubleshooting .......................... 48
Resetting the System .................. 54
Additional Information
Specifications .............................. 55
Playable Types of Audio Files ......57
Supported Input Audio
Formats ................................. 58
Supported HDMI Video
Formats ................................. 59
On BLUETOOTH
Communication .....................61
END USER LICENSE
AGREEMENT .......................... 62
Precautions ................................. 66
Index ............................................ 69
5
GB
What’s in the Box
•Bar Speaker (1)
•Subwoofer (1)
• Remote control (1)
R03 (size AAA) battery (2)
HDMI cable (supports the specification
equal to Premium High Speed HDMI
Cable with Ethernet) (1)
• WALL MOUNT TEMPLATE (1)
•Startup Guide
• Operating Instructions
Startup Guide
6
GB
What You Can Do with the System
Blu-ray Disc™ player, cable
box, satellite box, etc.
“Watching TV” (page 25)
“Playing the Connected AV
Device” (page 25)
Basic connection: Refer to
“Startup Guide” (separate
document).
Other connections: See
“Connecting to a TV or AV
Device” (page 14).
“Using the Control for HDMI
Function” (page 37)
“Using the “BRAVIA” Sync
Function” (page 39)
“Listening to Music
on a USB Device”
(page 28)
“Listening to Music/Sound with
the BLUETOOTH® Function”
(page 26)
“Performing the Wireless
Connection of the Subwoofer
(SECURE LINK)” (page 23)
“Connecting Sony TV
with the BLUETOOTH
Function Wirelessly”
(page 14)
The system supports object-based audio formats such as Dolby Atmos and
DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision.
7
GB
Guide to Parts and Controls
Details are omitted from the illustrations.
Front
 (power) button
Turns on the system or sets it to
standby mode.
(input select) button
Selects the input for playback on the
system.
BLUETOOTH button (page 26)
+/– (volume) buttons
TV indicator
Lights when the TV input is selected
(page 25).
HDMI indicator
Lights when the HDMI input is
selected (page 25).
BLUETOOTH indicator
– Flashes quickly in blue: During
pairing standby status
– Flashes in blue: BLUETOOTH
connection is being attempted.
– Lights in blue: BLUETOOTH
connection has been established.
ANALOG indicator
Lights when the ANALOG input is
selected (page 29).
USB indicator
Lights when the USB input is
selected (page 28).
Remote control sensor
Point the remote control at the
remote control sensor to operate
the system.
Bar Speaker (Main Unit)
8
GB
Rear
HDMI IN jack
For specifications and notes on
connections, see “Supported
HDMI Video Formats” (page 59).
HDMI OUT (TV (ARC)) jack
Connect a TV that has an HDMI
input jack with an HDMI cable.
The system is compatible with
Audio Return Channel (ARC). ARC
is the function that sends TV
sound to an AV device such as the
system from the TV’s HDMI jack.
For specifications and notes on
connections, see “Supported
HDMI Video Formats” (page 59).
(USB) port (page 28)
ANALOG IN jack
TV IN (OPT) jack
IR repeater (page 24)
Transmits the remote signal of
the TV remote control to the TV.
9
GB
Power indicator
– Lights in red: The subwoofer is in
standby mode.
– Lights in green: The subwoofer is
connected to the system.
– Lights in amber: The subwoofer is
connected to the system with the
Secure Link function.
Flashes in green: The subwoofer is
attempting to connect to the
system.
– Flashes in amber: The subwoofer
is attempting to connect to the
system with the Secure Link
function.
Turns off: The subwoofer is turned
off.
 (power) button
Turns on or off the subwoofer.
LINK button (page 23)
Ventilation holes
For safety, do not block the
ventilation holes.
Subwoofer
10
GB
(power)
Turns on the system or sets it to
standby mode.
TV (page 25)
HDMI (page 25)
BLUETOOTH (page 27)
ANALOG (page 29)
USB (page 28)
AUTO SOUND (page 31)
CINEMA (page 31)
MUSIC (page 31)
GAME (page 31)
NEWS (page 31)
SPORTS (page 31)
STANDARD (page 31)
VOICE (page 32)
VERTICAL S. (page 30)
NIGHT (page 32)
DISPLAY
Displays playback information on
the TV screen.
Playback information is not
displayed for the TV input.
DIMMER (page 41)
/// (page 12)
(enter) (page 12)
BACK (page 12)
OPTIONS (page 25, 33)
Displays the options menu on the
TV screen.
The options menu is not
displayed for the TV input.
HOME (page 12)
Remote Control
11
GB
 (muting)
Turns off the sound temporarily.
(volume) +*/
Adjusts the volume.
SW (subwoofer volume) +/–
Adjusts the volume of the
subwoofer.
Playback operation buttons
/ (previous/next)
Selects the previous/next track or
file.
Pressing and holding searches
backward or forward (rewind/fast
forward) during playback.
 (play/pause)*
Starts, pauses, or re-starts
playback (resume play).
AUDIO* (page 35)
*The AUDIO, , and + buttons have
a tactile dot. Use it as a guide during
operation.
About the replacement of
batteries for the remote control
When the system does not respond by
operating with the remote control,
replace two batteries with new
batteries.
Use R03 (size AAA) manganese
batteries for replacement.
12
GB
About the Home Menu
You can display the home menu on the TV screen by connecting the system and TV
with the HDMI cable (supplied). From the home menu, you can set the various
settings and select the input.
The home menu is displayed in the language that is selected in [Easy Setup]. (The
following screen is an example when English is selected.)
1 Press HOME.
The home menu appears on the TV screen.
2 Press // to select the category that you want, then press or .
The items for the selected category appear under the category list on the
TV screen.
3 Press /// to select the item that you want, then press .
The selected input or setting display appears on the TV screen.
To return to the previous screen, press BACK.
[Watch]
Selects the input of the TV or AV device that is connected to the system.
See “Watching Images” (page 25).
Using the Home Menu
Categories
Category items
HOME
BACK
///, (enter)
13
GB
[Listen]
Selects the input of the audio device that is connected to the system.
See “Listening to Music/Sound” (page 26).
[Setup]
Performs the basic initial settings by using [Easy Setup] or various advanced
settings of the system.
See “Performing Easy Setup” (page 42) or “Performing Advanced Settings”
(page 43).
In these Operating Instructions, the operations are described as steps that are
operated on the home menu displayed on the TV screen by using the remote control
while the system and TV are connected with the HDMI cable (supplied).
The operating steps that select items on the TV screen by using /// and are
simplified in the following way.
Example: Select [Setup] - [Advanced Settings] on the home menu.
The operation that selects a category and category item by pressing /// and
is expressed as “select.” The category and category item are linked with “-.
Example: Select [Speaker Settings] - [Manual Speaker Settings].
When repeating the operation that selects an item by pressing /// and , the
selected items are linked with “-.”
Tips
You can use the buttons on the main unit if they have the same or similar names as those
on the remote control.
Characters in brackets [ ] appear on the TV screen.
About the Steps Description
14
GB
Connecting to a TV or AV
Device with the HDMI
Cable
Refer to Startup Guide (separate
document).
For the connection to a 4K TV or 4K
Devices, see “Connecting a 4K TV and 4K
Devices” (page 18)
Connecting Sony TV with
the BLUETOOTH Function
Wirelessly
When using Sony TV* with the
BLUETOOTH function, you can listen to
sound of the TV or device that is
connected to the TV by connecting the
system and TV wirelessly.
* The TV needs to be compatible with
A2DP (Advanced Audio Distribution
Profile) of the BLUETOOTH profile.
If connecting the system and TV by using
the BLUETOOTH function, you cannot
display the operation screen for the
system such as the home menu on the TV
screen, and use the function of the
system other than the listening function
for the sound of the TV or device that is
connected to the TV.
To use all the functions of the system,
connect the system and TV with the HDMI
cable (supplied). For details about
connections and operations to listen to
TV sound by connecting with the HDMI
cable, refer to Startup Guide (separate
document).
This function is available only for Sony TV
that is compatible with BLUETOOTH
A2DP.
To connect the system and TV
wirelessly, you need to perform pairing
of the system and TV by using the
BLUETOOTH function.
Pairing is the process required to
mutually register the information on
BLUETOOTH devices to be connected
wirelessly in advance.
Connecting to a TV or AV Device
Notes
Blu-ray Disc player,
cable box, satellite
box, etc.
Listening to TV Sound by
Connecting the System and
TV Wirelessly
TV
BLUETOOTH
button
15
GB
1 Set up the remote control.
2 Turn on the TV.
3 Turn on the system.
4 Press and hold the BLUETOOTH
button on the main unit and TV on
the remote control
simultaneously for 5 seconds.
The system enters the pairing mode
and the BLUETOOTH indicator
flashes quickly.
5 On the TV, search the system by
performing the pairing operation.
The list of the BLUETOOTH devices
that are searched appears on the TV
screen.
For the operation method to pair
the BLUETOOTH device to the TV,
refer to the operating instructions of
the TV.
6 Pair the system and TV by
selecting “HT-X9000F” from the
list on the TV screen.
7 Make sure that the BLUETOOTH
and TV indicators on the main unit
light.
A connection between the system
and TV has been established.
8 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
system.
9 Adjust the volume of the system
by using the TV remote control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
If the TV sound is not output from the
system, press TV and check the status of
the indicators on the Bar Speaker.
The BLUETOOTH and TV indicators light:
The system and TV are connected and
TV sound is output from the system.
The BLUETOOTH indicator flashes
quickly: Perform pairing on the TV.
The TV indicator lights: Perform steps
from the start.
When you connect the system and TV
with the HDMI cable (supplied), the
BLUETOOTH connection is canceled. To
connect the system and TV with the
BLUETOOTH function again, disconnect
the HDMI cable, then perform the
connecting operation from the start.
You can turn the system on/off, adjust
the volume, and mute the sound by
using the TV remote control when
connecting the TV to the system
wirelessly.
1 Turn the TV on with the TV remote
control.
The system is turned on by
interlocking with the TV power, and
TV sound is output from the system.
Notes
Listening to Sound of the
Paired TV
16
GB
2 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
system.
3 Adjust the volume of the system
by using the TV remote control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Tip
When the TV is turned off, the system is
also turned off by interlocking with the TV
power.
About operations with the
remote control that is supplied
with the system
You can use the following buttons.
You can adjust the volume of the
subwoofer, and adjust sound quality in
addition to turning the system on/off
and adjusting volume that can be
operated by the TV remote control.
If you select the input other than TV on
the remote control supplied with the
system, the TV sound is not output from
the system. To output the TV sound, press
TV on the remote control to change to the
TV input.
During the connecting the TV with the
BLUETOOTH function, the following
remote control buttons do not work.
///, (enter), OPTIONS, HOME,
DISPLAY,  (play/pause), /
(previous/next)
SW +/–
+/–
Sound mode
selecting buttons
VOICE
VERTICAL S.
NIGHT
Notes
17
GB
Connecting a TV with an
Analog Audio Cable
To connect the following devices to the
system, connect them via the ANALOG
IN jack on the system.
TVs that do not have an HDMI jack and
optical digital output jack
– Portable audio devices such as
smartphones and WALKMAN®
For listening to the connected device,
see “Listening to the Device Connected
with an Analog Audio Cable” (page 29).
If the TV’s headphone jack also serves as
an audio output jack, check the audio
output settings of the TV. For details, refer
to the operating instructions of the TV.
Smartphone,
WALKMAN®, other
audio devices, etc.
TV
Analog
audio out
Analog audio cable
(not supplied)
Note
18
GB
Connecting a 4K TV and
4K Devices
All HDMI jacks on the system support 4K
video format and HDCP2.2 (High-
bandwidth Digital Content Protection
System Revision 2.2).
To watch 4K video content, connect the
4K TV and 4K devices to the system via
an HDCP2.2-compatible HDMI jack on
each device.
You can only view 4K video content
through the HDCP2.2-compatible HDMI
jack connection.
HDMI cable (supplied)
HDMI cable (not supplied)
Use an HDMI cable which supports the 4K
video format that you want to watch. For
details, see “Supported HDMI Video
Formats” (page 59).
When an HDCP2.2-
Compatible HDMI Jack on
the TV is Labeled with “ARC”
HDCP2.2-
compatible
HDMI jack
Blu-ray Disc player,
cable box, satellite
box, etc.
HDCP2.2-
compatible
HDMI jack
TV
19
GB
1 Check which HDMI IN jack on your
TV is compatible with HDCP2.2.
Refer to the operating instructions
of the TV.
2 Connect the HDCP2.2-compatible
HDMI IN jack on the TV and HDMI
OUT jack on the main unit with the
HDMI cable (supplied).
TV connection is complete.
3 Connect the HDCP2.2-compatible
HDMI OUT jack of the 4K device
and HDMI IN jack of the main unit
with the HDMI cable (not
supplied).
Refer to the operating instructions
of the 4K device to check that the
HDMI OUT jack of the 4K device is
compatible with HDCP2.2.
4K device connection is complete.
If your TV’s HDCP2.2-compatible HDMI
IN jack is not compatible with ARC
(Audio Return Channel), the TV sound is
not output from the system.
In this case, connect the optical output
jack of the TV and the TV IN (OPT) jack on
the main unit with the optical digital
cable (not supplied).
HDMI cable (supplied)
HDMI cable (not supplied)
Use an HDMI cable which supports the 4K
video format that you want to watch. For
details, see “Supported HDMI Video
Formats” (page 59).
Optical digital cable (not supplied)
When an HDCP2.2-
Compatible HDMI Jack on
the TV is not Labeled with
“ARC”
HDCP2.2-
compatible
HDMI jack
Blu-ray Disc player, cable
box, satellite box, etc.
HDCP2.2-
compatible
HDMI jack
TV
20
GB
To watch 4K video content, select the
appropriate setting for the connected
4K TV and 4K device.
1 Press HOME.
The home menu appears on the TV
screen.
2 Select [Setup] - [Advanced
Settings] on the home menu.
3 Select [HDMI Settings] - [HDMI
Signal Format].
The [HDMI Signal Format] screen
appears on the TV screen.
4 Select [HDMI IN], then select the
setting you want.
[Standard format] (default
setting): Select when the
connected TV and devices support
standard bandwidth video
formats.
[Enhanced format]: Select when
both the connected TV and
devices support high bandwidth
video formats such as 4K 60p
4:4:4 etc.
For the relation of the [HDMI Signal
Format] setting options, supported
video format signals, and HDMI
cables to be used, see “Supported
HDMI Video Formats” (page 59).
Depending on the TV, the TV setting for
HDMI output may be required. Refer to
the operating instructions of the TV.
When the picture is not displayed after
[HDMI Signal Format] is set to [Enhanced
format], set it to [Standard format].
Setting the HDMI Signal
Format to Watch 4K Video
Content
Notes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127

Sony HT-X9000F 取扱説明書

タイプ
取扱説明書

他の言語で