Sony CDX-V5800 取扱説明書

Operating Instructions

CDX-V5800

For installation and connections, see the supplied installation/connections manual.

2-109-483-21 (1)

USUSGB

CS

FM/AM

Multi Media

Player

2

CDX-V5800

2-109-483-11 (1)

01GB01INT-E.fm masterpage:Left

Welcome !

Thank you for purchasing this Sony Multi Media

Player. You can enjoy its various features even

more with:

• VCD 1.1 and 2.0 (PBC) playback.

• MP3 file playback.

• CD-R/CD-RW which can have a session added

can be played (page 7).

• Discs recorded in Multi Session can be played,

depending on the recording method (page 8).

• ID3 tag* version 1.1 or 2.0 information

(displayed when an MP3 file is played).

• Supplied controller accessory

Card remote commander RM-X138

* ID3 tag is an MP3 file that contains information

about album name, artist name, track name, etc.

This label is located on the bottom of the

chassis.

3

00GB+00COV-ETOC.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Table of Contents

Location of controls . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 7

About MP3 files . . . . . . . . . . . . . . . . . . . . . . 8

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . 10

Detaching the front panel . . . . . . . . . . . . . . 10

Setting the clock . . . . . . . . . . . . . . . . . . . . . 11

CD

Listening to a disc . . . . . . . . . . . . . . . . . . . . 12

Watching a Video CD . . . . . . . . . . . . . . . . . 13

Display items. . . . . . . . . . . . . . . . . . . . . . . . 14

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 15

Playing tracks in random order

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 15

Radio

Storing stations automatically

— Best Tuning Memory (BTM) . . . . . . 15

Receiving the stored stations . . . . . . . . . . . 16

Storing only the desired stations. . . . . . . . . 16

Other Functions

Adjusting the sound characteristics . . . . . . 17

Quickly attenuating the sound . . . . . . . . . . 17

Changing the sound and display

settings . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the equalizer (EQ3). . . . . . . . . . . . . 18

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting auxiliary audio

equipment. . . . . . . . . . . . . . . . . . . . . . . . 19

Using the On-Screen Display . . . . . . . . . . . 20

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 21

Removing the unit. . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . . . 23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 24

Error displays/Messages . . . . . . . . . . . . . . . 25

4

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Location of controls

Refer to the pages listed for details.

a DSO button 19

b SOURCE (Power on/Radio/CD/AUX*

1

)

button

To select the source.

c SCRL button 14

d Receptor for the card remote

commander

e Display window

f Z (eject) button (located on the front side

of the unit, behind the front panel) 12, 13

g OPEN button 10, 12, 13

h EQ3 button 18

i MODE button

To change operation.

j Volume control dial/Select button

Rotate to:

– Adjust the volume.

– Adjust settings.

Press to:

– Select items.

k DSPL (display mode change) button

11, 14, 18

l SENS button 16

m RESET button (located on the front side of

the unit, behind the front panel) 10

n BTM button

o Number buttons 18

Radio:

To store stations/receive stored stations.

CD/VCD:

(1): REP 15

(2): SHUF 15

(3): SLOW 13

(4): AUDIO 14

(5): OSD 20

(6): PAUSE 12, 13

p Frequency select switch (located on the

bottom of the unit)

See “Frequency select switch” in the

Installation/Connections manual.

q OFF (Stop/Power off) button*

2

10, 12,

13

*1 Available only when an optional Sony portable

device is connected to AUX IN terminal of the unit.

*2 Warning when installing in a car without an

ACC (accessory) position on the ignition switch

After turning off the ignition, be sure to press and

hold (OFF) on the unit until the display disappears.

Otherwise, the display does not turn off and this causes

battery drain.

P

U

S

H

D

I

A

L

S

E

L

E

C

T

S

O

U

R

C

E

A

L

B

U

M

/

P

R

E

S

E

T

OPEN

6543

BBEAUDIO OSD PAUSESHUF SLOWREP

21

BTMSENS

EQ3

D

S

P

L

M

O

D

E

CDX-V5800

DSO

SEEK SEEK

S

C

R

L

OFF

5

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

r ALBUM/PRESET buttons (+/–)

To receive preset stations, skip albums*.

* Available only when an MP3 file is played.

s SEEK buttons (–/+)

To skip tracks/fast-forward, reverse a track/

tune in stations automatically, find a station

manually/select a setting.

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

a DSPL button

b Number buttons

c DSO button

d PBC button 14

e SOURCE button

f SEEK (–/+) buttons

g SEL button

h OFF button

i VOL (+/–) buttons

j EQ3 button

k MODE button

l O (return) button 14

m PRESET (ALBUM) (+/–) buttons

n ENTER button 14

o ATT button

Note

If the display disappears by pressing (OFF), it cannot

be operated with the card remote commander unless

(SOURCE) on the unit is pressed, or a disc is inserted

to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery” on page 21.

SEEK

P

U

S

H

D

I

A

L

S

E

L

E

C

T

S

O

U

R

C

E

A

L

B

U

M

/

P

R

E

S

E

T

SENS

EQ3

D

S

P

L

M

O

D

E

DSO

SEEK SEEK

S

C

R

L

(SEEK)

(–): to select

leftwards/

.

(SEEK)

(+): to select

rightwards/

>

(ALBUM/PRESET)

(+): to select upwards

(ALBUM/PRESET)

(–): to select downwards

Card remote commander RM-X138

continue to next page t

ATTOFF

REP SHUF SLOW

DSPL

1

4

MODE

OSDAUDIO PAUSE

2

5

3

6

SOURCE

PRESET

+

PRESET

-

SEEK

+

SEEK

–

SEL

ENTER

PBC

EQ3DSO

VOL

6

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Selecting an album with the card

remote commander

Album can be skipped using the PRESET

(ALBUM) (+/–) buttons on the card remote

commander.

* Available only when an MP3 file is played.

Skipping tracks continuously

Press once (SEEK) (+) or (SEEK) (–) on the

card remote commander, then press again within

2 seconds and hold.

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power aerial will extend automatically while

the unit is operating.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

To Press

Skip albums*

–Album selection

+ or – [once for each album]

To continuously skip

albums, press and hold

either button.

7

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc

magazines when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from

using such discs:

– Inability to eject a disc (due to a label or

sticker peeling off and jamming the eject

mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to

heat shrinking of a sticker or label causing a

disc to warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• You cannot play 8 cm CDs.

• Before playing, clean the discs with a

commercially available cleaning cloth. Wipe

each disc from the centre out. Do not use

solvents such as benzine, thinner, commercially

available cleaners, or antistatic spray intended

for analogue discs.

Music discs encoded with copyright

protection

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection are marketed by some

record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

Notes on CD-Rs (recordable CDs)/CD-

RWs (rewritable CDs)

This unit can play the following discs:

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this unit.

• You cannot play a CD-R/CD-RW that is not

finalized*.

• You can play MP3 files recorded on CD-

ROMs, CD-Rs, and CD-RWs.

• A CD-R/CD-RW to which a session can be

added can be played.

* A process necessary for a recorded CD-R/CD-RW

disc to be played on the audio CD player.

Type of discs Label on the disc

Audio CD

MP3 files

continue to next page t

8

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Notes on Video CDs

This unit can play the following discs:

A compact disc that contains moving pictures.

The picture data uses the MPEG 1 format (Video

CD), worldwide standards of digital compression

technology.

Video CDs also contain compact audio data.

Sounds outside the range of human hearing are

compressed while the sounds we can hear are not

compressed.

There are 2 versions of Video CDs.

• Version 1.1:

You can play only moving pictures and sounds.

• Version 2.0:

You can play hi-resolution still pictures and

enjoy PBC (Playback Control) functions.

This unit conforms to both versions.

About MP3 files

MP3

MP3 (MPEG 1 Audio Layer-3) is a standard

technology and format for compressing a sound

sequence. The file is compressed to about 1/10 of

its original size. Sounds outside the range of

human hearing are compressed while the sounds

we can hear are not compressed.

Notes on discs

You can play MP3 files recorded on CD-ROMs,

CD-Rs, and CD-RWs.

The disc must be in the ISO 9660*

1

level 1 or

level 2 format, or Joliet or Romeo in the

expansion format.

You can use a disc recorded in Multi Session*

2

.

*1 ISO 9660 Format

The most common international standard for

the logical format of files and folders on a

CD-ROM.

There are several specification levels. In level

1, file names must be in the 8.3 format (no

more than 8 characters in the name, no more

than 3 characters in the extension “.MP3”)

and in capital letters. Folder names can be no

longer than 8 characters. There can be no

more than 8 nested folder levels. Level 2

specifications allow file names up to 31

characters long.

Each folder can have up to 8 trees.

For Joliet or Romeo in the expansion format,

make sure of the contents of the writing

software, etc.

*2 Multi Session

This is a recording method that enables

adding of data using the Track-At-Once

method. Conventional CDs begin at a CD

control area called the Lead-in and end at an

area called Lead-out. A Multi Session CD is a

CD having multiple sessions, with each

segment from Lead-in to Lead-out regarded

as a single session.

CD-Extra: The format which records audio

(audio CD data) as tracks on session 1, and

records data as tracks on session 2.

Mixed CD: In this format, data is recorded as

track 1, and audio (audio CD data) is recorded

as track 2.

Type of discs Label on the disc

Video CD

VCD

9

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Notes

• With formats other than ISO 9660 level 1 and level 2,

folder names or file names may not be displayed

correctly.

• When naming, be sure to add the file extension

“.MP3” to the file name.

• If you put the extension “.MP3” to a file other than

MP3, the unit cannot recognize the file properly and

will generate random noise that could damage your

speakers.

• The following discs take a longer time to start

playback.

– a disc recorded with complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

Cautions when playing a disc that is recorded in

Multi Session

• When the first track of the first session is audio CD

data:

Only audio CD data of the first session is played

back.

Any data in subsequent sessions is skipped.

• When the first track of the first session is not audio

CD data:

– If an MP3 file is in the disc, only MP3 file(s) is

played back and other data is skipped. (Audio CD

data is not recognized.)

– If no MP3 file is in the disc, “NO MUSIC” is

displayed and nothing is played back. (Audio CD

data is not recognized.)

The playback order of the MP3 files

The playback order of the folders and files is as

follows:

Notes

• A folder that does not include an MP3 file is skipped.

• When you insert a disc with many trees, it takes a

longer time to start playback. We recommend that

you make only 1 or 2 trees for each disc.

• Maximum folder number: 100 (including root folder

and empty folders)

• The maximum number of MP3 files and folders that

can be contained in a disc: 999

• The maximum number of characters an album/file

name can contain: 18.

Tip

To specify a desired playback order, before the folder

or file name, input the order by number (e.g., “01,”

“02”), then record contents onto a disc. (The order

differs depending on the writing software.)

1

2

3

4

5

6

1

2

3

4

7

8

5

6

7

8

9

Folder (album)

MP3 file (track)

Tree 1

(root)

Tree 2

Tree 4

Tree 5

Tree 3

10

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

CD playback or radio reception stops (the key

illumination and display remain on).

* If your car has no ACC (accessory) position on

the ignition switch, be sure to turn the unit off by

pressing (OFF) until the display disappears to

avoid car battery drain.

2 Press (OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the front panel while the unit is still

turned on, the power will turn off automatically to

prevent the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel with you, use the

supplied front panel case.

RESET button

1

2

11

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Press (SOURCE) on the unit (or insert a CD) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (DSPL) for 2 seconds.

The hour indication flashes.

1Rotate the volume control dial to set

the hour.

2Press the select button.

The minute indication flashes.

3Rotate the volume control dial to set

the minute.

2 Press (DSPL).

The clock starts. After the clock setting is

complete, the display returns to normal play

mode.

A

B

x

12

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

CD

Listening to a disc

1 Press (OPEN) and insert the disc

(labelled side up).

2 Close the front panel.

Playback starts automatically.

If a disc is already inserted, press (SOURCE)

repeatedly until “CD” appears to start playback.

* Available only when an MP3 file is played.

To skip tracks continuously, press (SEEK) (+) or

(SEEK) (–), then press again within 2 seconds

and hold.

Notes

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before playback begins. During this time, “READ” is

displayed. Play will automatically start when reading

is complete.

• Depending on the condition of the disc, it may not

play back (page 7, 8).

• While the first/last track on the disc is playing, if

(SEEK) (–) or (SEEK) (+) is pressed, playback skips

to the last/first track of the disc.

• When the last track on the disc is over, playback

restarts from the first track of the disc.

• If you play a high-bit rate MP3 file such as 320 kbps,

sound may be intermittent.

To Press

Pause playback

and resume play

after pause

(6) (PAUSE)

Stop playback (OFF)

Eject the disc (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (–/+)

(./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK) (–/+)

(m/M)

[hold to desired point]

Skip albums*

–Albums selection

(ALBUM/PRESET) (+/–)

[once for each album]

To continuously skip

albums, press and hold

either button.

13

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Watching a Video CD

Depending on the Video CD, some operations

may be different or restricted. Refer to the

instructions supplied with your disc.

Note

This unit switches the colour system, PAL/NTSC,

according to the TV. For details, see “Changing the

sound and display settings” on page 17.

1 Turn on the connected mobile colour

TV and select the video input so that

you can view the pictures from this

unit.

2 Press (OPEN) and insert the disc

(labelled side up).

3 Close the front panel.

Playback starts automatically.

Tip

The menu screen may appear on the TV screen,

depending on the Video CD. To play the disc

interactively, follow the instructions on the menu

screen. For details, see “PBC (Playback Control)

functions” on page 14.

If a disc is already inserted, press (SOURCE)

repeatedly until “VCD” appears to start

playback.

* Pressing (SEEK) (+) for more than 3 seconds

further increase the preview speed.

To Press

Pause playback

and resume play

after pause

(6) (PAUSE)

Play at slow speed (3) (SLOW)

Each press changes the

playback speed as follows:

1/2 times normal speed

t

1/4 times normal speed t

1/8 times normal speed t

normal playback speed.

Stop playback (OFF)

Eject the disc (OPEN) then Z

Skip tracks

–Automatic

Music Sensor

(SEEK) (–/+)

(./>)

[once for each track]

Fast-forward/

reverse*

–Manual Search

(SEEK) (–/+)

(m/M)

[hold to desired point]

continue to next page t

14

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

PBC (Playback Control) functions

When playing Video CDs (Ver. 2.0) with PBC

functions, you can enjoy simple interactive

operations, operations with search functions, etc.

PBC playback allows you to play Video CDs

interactively, following the menu on the TV

screen.

1 Start playing a Video CD with PBC

functions.

2 Press (PBC) on the card remote

commander.

3 Press (ALBUM/PRESET) (+) or

(ALBUM/PRESET) (–) to select the item

number you want.

Press (SEEK) (–) to return to the previous

menu screen, and press (SEEK) (+) to go to

the next menu.

4 Press (ENTER) on the card remote

commander.

Follow the menu instructions on the screen

for interactive operations.

During playback, press O (return) on the card

remote commander to return to the preceding

selection screen.

Notes

• Refer to the instructions supplied with the disc, as

the operating procedure may differ according to the

Video CD.

• When the PBC function is turned off, playback

restarts from the first track of the disc.

• When you replace the disc, the PBC function will be

turned off.

• Repeat play and shuffle play do not work during

PBC playback.

Tip

When you select an item number you want in step 3,

the playback of the Video CD starts automatically after

2 seconds.

Changing the sounds

Some discs are recorded in Multiplex Broadcast

with different sounds recorded on the left and

right channels. For these discs, select the channel

that plays the sound you want to hear. The

selected sound will be played from both

speakers.

During playback, press (4) (AUDIO)

repeatedly to select the sound setting.

MONO-L

t MONO-R t STEREO

Display items

When the album/track changes, any prerecorded

title of the new album/track is automatically

displayed. (If the A.SCRL (Auto Scroll) function

is set to “ON,” names exceeding 8 characters will

be scrolled (page 17).)

* Only for MP3 files.

Only track name/artist name/album name in ID3 tag

is displayed.

When pressing (DSPL), “NO ID3” indicates that

there is no ID3 tag to display.

Notes

• Some characters cannot be displayed.

• For some ID3 tags with very many characters,

information may not scroll.

Notes on MP3

• ID3 tag applies only to version 1.1 or 2.0.

• Some characters and signs cannot be displayed

(appear as “ *”). The maximum number of

characters for an album (folder) name/track (file)

name that can be displayed is 18 each. ID3 tag is up

to 90 characters.

• In the following cases, elapsed playing time may not

be displayed accurately.

– when an MP3 file of VBR (variable bit rate) is

played.

– during fast-forward/reverse.

Tips

• When the A.SCRL (Auto Scroll) function is set to

“OFF” and the album/track is changed, the album/

track name or ID3 tag does not scroll.

• When an MP3 file is played and the album is

changed, the new album number is displayed.

To Press

Switch display item (DSPL)

Scroll display item (SCRL)

Displayable items

• Track number/Elapsed playing time

• Album (folder) name*

• Track (file) name*

• ID3 tag*

• Clock

Source

15

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Playing tracks repeatedly

— Repeat Play

You can select:

• REP-TRACK — to repeat the current track.

• REP-ALBM* — to repeat the tracks in the

current album.

* Available only when an MP3 file is played.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select

“REP-OFF.”

Playing tracks in random

order

— Shuffle Play

You can select:

• SHUF-ALBM* — to play the tracks in the

current album in random order.

• SHUF-DISC — to play the tracks in the current

disc in random order.

* Available only when an MP3 file is played.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select

“SHUF-OFF.”

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1 and AM2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (BTM) for 2 seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

16

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

If preset tuning does not work

— Automatic tuning/Local Seek Mode

Automatic tuning:

Press (SEEK) (+) or (SEEK) (–) to

search for the station.

Scanning stops when the unit receives a

station. Repeat the operation until the desired

station is received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) repeatedly

until “LOCAL-ON” appears.

Only the stations with relatively strong

signals will be tuned in.

To cancel the local seek mode, press (SENS)

twice when receiving FM.

Note

When receiving AM, to cancel the local seek mode,

press (SENS) (“LOCAL-OFF” appears).

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) (+) or (SEEK) (–) to

locate the approximate frequency, then press

(SEEK) (+) or (SEEK) (–) repeatedly to fine adjust to

the desired frequency (manual tuning).

If FM stereo reception is poor

— Monaural Mode

During radio reception, press (SENS)

repeatedly until “MONO-ON” appears.

The sound improves, but becomes monaural

(“ST” disappears).

To return to normal radio reception mode, press

(SENS) (“MONO-OFF” appears).

Tip

If FM broadcasts are difficult to hear, set DSO to

“OFF” (page 19).

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press (SEEK) (+) or (SEEK) (–) to tune

in the station that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

17

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Other Functions

Adjusting the sound

characteristics

You can adjust the balance, fader, low pass filter

and subwoofer volume.

1 Press the select button repeatedly

until “BAL,” “FAD,” “LPF” or “SUB”

appears.

Each time you press the select button, the

item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right) t FAD (front-rear) t

LPF (low pass filter)*

2

*

3

t

SUB (subwoofer volume)*

2

*

4

t

AUX (AUX level)*

5

*1 When EQ3 is activated (page 18).

*2 When “SUB” is selected (page 17).

*3 The cut off frequency is adjustable to 78 Hz,

125 Hz or OFF.

*4 The volume level is adjustable between –10

and +10 steps. (Below –10, “ATT” is displayed.)

*5 When “AUX–ON” is activated.

2 Rotate the volume control dial to

adjust the selected item.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

Press (ATT) on the card remote

commander.

After “ATT-ON” momentarily appears,

“ATT” appears in the display.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

Changing the sound and

display settings

The following items can be set:

• REAR/SUB*

1

— to switch the audio output

REAR or SUB.

– Select “REAR” to output to a power amplifier.

– Select “SUB” to output to a subwoofer.

• AUX*

1

(page 19)

• A.SCRL (Auto Scroll)*

2

(page 14)

• M.DSPL (Motion Display) — to turn the

motion display on or off.

– Select “ON” to activate the motion display

(the moving pattern appears in the display).

– Select “OFF” to deactivate the motion display.

•DEMO*

1

— to turn the demonstration display

on or off.

– Select “ON” to activate the demonstration

display (The demonstration starts about 10

seconds after the unit is turned off).

– Select “OFF” to deactivate the

demonstration display.

•BEEP*

3

— to turn the beeps on or off.

•PAL/NTSC*

1

— to change the TV colour

system to PAL or NTSC.

• DIM — to change the brightness of the display.

– Select “ON” to dim the display.

– Select “OFF” to deactivate the Dimmer.

Switching the REAR/SUB*

1

Press the select button and then rotate

the volume control dial.

After 3 seconds, the display returns to normal

play mode.

continue to next page t

18

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Selecting the desired item

Press the select button and the

desired button simultaneously.

Select button + (3): A.SCRL*

2

Select button + (4): M.DSPL

Select button + (4): DEMO*

1

Select button + (6): BEEP*

3

Select button + (MODE): PAL/NTSC*

1

Select button + (DSPL): DIM

After the mode setting is complete, the display

returns to normal play mode.

To cancel the item, press the select button and the

desired button simultaneously again.

*1 When the unit is turned off.

*2 When CD is played.

*3 The beep sound is output only when the built-in

amplifier is used.

Setting the equalizer (EQ3)

You can select an equalizer curve for 7 music

types (XPLOD, VOCAL, CLUB, JAZZ, NEW

AGE, ROCK, CUSTOM and OFF (equalizer

OFF)).

You can store a different equalizer setting for

each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a desired

source.

2 Press (EQ3) repeatedly to select the

desired equalizer curve.

Each time you press (EQ3), the item

changes.

To cancel the equalizing effect, select “OFF.”

Adjusting the equalizer curve

You can store and adjust the equalizer settings

for different tone ranges.

1 Press (SOURCE) to select a desired

source.

2 Press (EQ3) repeatedly to select the

desired equalizer curve.

3 Adjusting the equalizer curve.

1Press the select button repeatedly

to select the desired tone range.

Each time you press the select button, the

tone range changes.

LOW t MID t HI (t BAL t FAD t

LPF t SUB t AUX )

2Rotate the volume control dial to

adjust to the desired volume level.

The volume level is adjustable by 1 dB

steps from –10 dB to +10 dB.

3Repeat step 1 and 2 to adjust the

equalizer curve.

To restore the factory-set equalizer curve,

press the select button for 2 seconds.

Note

When EQ3 is set to “OFF,” you cannot adjust the

equalizer curve settings.

19

01GB02CD-E.fm masterpage:Right

CDX-V5800

2-109-483-11 (1)

Setting the Dynamic

Soundstage Organizer (DSO)

If your speakers are installed into the lower part

of the doors, the sound will come from below

and may not be clear.

The DSO (Dynamic Soundstage Organizer)

function creates a more ambient sound as if there

were speakers above the dashboard (virtual

speakers).

You can store the DSO setting for each source.

DSO mode and image of virtual speakers

*1 DSO-1

*2 DSO-2

*3 DSO-3

*4 DSO-OFF

1 Press (SOURCE) to select a desired

source.

2 Press (DSO) repeatedly until the

desired DSO setting appears.

Each time you press (DSO), the DSO setting

changes.

To cancel the DSO function, select “DSO-

OFF.” After 1 second, the display returns to

normal play mode.

Notes

• Depending on the type of car interior or type of

music, DSO may not have a desirable effect.

• If FM broadcasts are difficult to hear, set DSO to

“OFF.”

Connecting auxiliary audio

equipment

You can listen to the sound from your car

speakers by connecting optional Sony portable

devices.

Selecting auxiliary equipment

Press (SOURCE) repeatedly to select

“AUX.”

Adjusting the volume level

You can adjust the volume for each connected

audio equipment.

1 Press the select button repeatedly to

select “AUX.”

2 Rotate the volume control dial to

select a desired volume level.

The volume level is adjustable in 1 dB steps

from –6 dB to +6 dB.

To deactivate auxiliary equipment in

the source display

1 Press (OFF).

CD/VCD playback or radio reception stops.

2 Press the select button repeatedly

until “AUX-ON” appears.

3 Rotate the volume control dial

clockwise to select “AUX-OFF.”

*3

*2

*1

*4

*3

*2

*1

20

CDX-V5800

2-109-483-11 (1)

01GB02CD-E.fm masterpage:Left

Using the On-Screen Display

You can check the operating status of the player

and the information about the disc using the on-

screen display on the TV.

Press (5) (OSD).

The on-screen display will appear on the TV.

Notes

• When you select tuner as the source, the on-screen

display will not appear.

• The initial setting of the on-screen display changes

depending on the selected source.

– when the CD, MP3 is played back: on.

– when the Video CD is played back: off.

• You cannot turn off the on-screen display when a CD

or MP3 is played.

Switching the language for the

on-screen display

During playback, press (5) (OSD) for

2 seconds.

Each time you press (5) (OSD) for

2 seconds, the language changes as follows:

ENGLISH y CHINESE

Display information of the on-screen

display

Note

The display information will differ, depending on the

operation or settings.

CD - DA

TRK - REP

2 1 : 42

Disc type

Track number

Elapsed playing time

Play mode

ALBM

3 3 0 : 51 TRACK00003[ ALBUM03 ]

[ ALBM - SHUF ]

ALBUM01

ALBUM02

ALBUM03

ALBUM04

ALBUM05

ALBUM06

ALBUM07

ALBUM08

TRACK00001. MP3

TRACK00002. MP3

TRACK00003. MP3

TRACK00004. MP3

TRACK00005. MP3

TRACK00006. MP3

TRACK00007. MP3

TRACK00008. MP3

TRACK00009. MP3

TRACK00010. MP3

TRK SECMIN ID3

Play mode

Album number

Track number

Elapsed playing time

ID3 tag

Album name File name

ページが読み込まれています...

Sony CDX-V5800 取扱説明書

Sony CDX-V5800 取扱説明書

他の言語で

関連論文

その他のドキュメント