Pioneer DEH-1150MP ユーザーマニュアル

<QRD3017-A> <1>
Owner’s Manual
Manual de instrucciones
Manual do proprietário
CD RECEIVER
RADIO CD
CD PLAYER
DEH-1150MPG
DEH-1150MP
English
Español
Português (B)
ES_Owner_5L-1.indd   1 2008/07/04   16:25:35

Black plate (2,1)

Thank you for purchasing this PIONEER product.

Please read through this manual before usi ng the product for the first time, to en-

sure proper use. After reading, please keep the manual in a safe and accessible place

for future reference.

Before You Start

About this unit 3

Visit our website 3

Protecting your unit from theft 3

– Removing the front panel 3

– Attaching the front panel 4

Use and care of the remote control 4

– Installing the battery 4

– Using the remote control 4

Operating this unit

What’s what 5

– Head unit 5

– Remote control 5

– Display indication 6

Basic Operations 6

– Power ON/OFF 6

– Selecting a source 6

– Adjusting the volume 6

Tuner 7

– Listening to the radio 7

– Storing and recalling broadcast

frequencies 7

– Tuning in strong signals 7

– Storing the strongest broadcast

frequencies 7

Built-in Player 7

– Playing a disc 7

– Repeating play 8

– Playing tracks in random order 8

– Scanning tracks or folders 8

– Pausing disc playback 9

– Using compression and BMX 9

– Searching every 10 tracks in the current

disc or folder 9

– Displaying text information on disc 9

Audio Adjustments 10

– Using balance adjustment 10

– Using the equalizer 10

– Adjusting equalizer curves 10

– Adjusting loudness 10

– Adjusting source levels 10

Other Functions 11

– Adjusting initial settings 11

– Setting the clock 11

– Setting the FM tuning step 11

– Setting the AM tuning step 11

– Switching the auxiliary setting 12

Connections

Connection diagram 14

Installation

DIN front/rear mount 15

– DIN Front-mount 15

– DIN Rear-mount 16

Additional Information

Error messages 17

Handling guideline of discs and player 17

Dual Discs 18

Compressed audio files 18

– Example of a hierarchy 18

– Compressed audio compatibility 18

Specifications 20

<QRD3017-A

/

N>2

Contents

En

2

Black plate (3,1)

About this unit

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with liquids.

! “CLASS 1 LASER PRODUCT”

This product contains a laser diode of higher

class than 1. To ensure continued safety, do

not remove any covers or attempt to gain ac-

cess to the inside of the product. Refer all ser-

vicing to qualified personnel.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture.

! If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

! Should this unit fail to operate properly, please

contact your dealer or nearest authorized

PIONEER Service Station.

About WMA

The Windows Media™ logo printed on the box

indicates that this unit can play back WMA

data.

Windows Media and the Windows logo are tra-

demarks or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

! This unit may not operate correctly depend-

ing on the application used to encode

WMA files.

About MP3

Supply of this product only conveys a license

for private, non-commercial use and does not

convey a license nor imply any right to use

this product in any commercial (i.e. revenue-

generating) real time broadcasting (terrestrial,

satellite, cable and/or any other media), broad-

casting/streaming via internet, intranets and/

or other networks or in other electronic con-

tent distribution systems, such as pay-audio or

audio-on-demand applications. An indepen-

dent license for such use is required. For de-

tails, please visit

http://www.mp3licensing.com.

Visit our website

Visit us at the following site:

http://pioneer.jp/group/index-e.html

! We offer the latest information about

Pioneer Corporation on our website.

Protecting your unit from

theft

The front panel can be detached to deter theft.

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight and

high temperatures.

! Before detaching, be sure to remove the AUX

cable from the front panel. Otherwise, this

unit, connected device or vehicle interior may

be damaged.

Removing the front panel

1 Press DETACH to release the front

panel.

2 Grab the front panel and remove.

3 Put the front panel into the provided

protective case for safe keeping.

<

QRD3017-A

/

N>3

Before You Start

En

3

English

Section

01

Black plate (4,1)

Attaching the front panel

1 Slide the front panel to the left until it

clicks.

Front panel and the head unit are jointed on

the left side. Make sure that the front panel

has been jointed to the head unit.

2 Press the right side of the front panel

until it is firmly seated.

# If you can’t attach the front panel to the head

unit successfully, try again. Front panel may be

damaged if you attach the front panel forcedly.

Use and care of the remote

control

Installing the battery

Slide the tray on the back of the remote con-

trol out and insert the battery with the plus (+)

and minus (–) poles aligned properly.

WARNING

Keep the battery out of the reach of children.

Should the battery be swallowed, consult a doc-

tor immediately.

CAUTION

! Use one CR2025 (3 V) lithium battery.

! Remove the battery if the remote control is not

used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the

same or equivalent type.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic objects.

! If the battery leaks, wipe the remote control

completely clean and install a new battery.

! When disposing of used batteries, comply

with governmental regulations or environmen-

tal public institutions’ rules that apply in your

country/area.

Using the remote control

Point the remote control in the direction of the

front panel to operate.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

<QRD3017-A

/

N>4

Before You Start

En

4

Section

01

Black plate (5,1)

What’s what

Head unit

12 4 5 6

d c a

89 7

3

b

1 FUNCTION button

Press to recall the function menu when op-

erating a source.

2 AUDIO button

Press to select various sound quality con-

trols.

3 a/b/c/d buttons

Press to perform manual seek tuning, fast

forward, reverse and track search controls.

Also used for controlling functions.

4 Disc loading slot

Insert a disc to play.

5 EJECT button

Press to eject a CD from your built-in CD

player.

6 DISPLAY button

Press to select different displays.

Press and hold to scroll through the text in-

formation.

7 CLOCK button

Press to change to the clock display.

8 DETACH button

Press to remove the front panel from the

head unit.

9 AUX input jack (3.5 mm stereo jack)

Use to connect an auxiliary device.

a 1 to 6 buttons

Press for preset tuning.

b SOURCE button, VOLUME

This unit is turned on by selecting a source.

Press to cycle through all the available

sources.

Press and hold to recall the initial setting

menu when the sources are off.

Rotate it to increase or decrease the volume.

c EQ button

Press to select various equalizer curves.

Press and hold to turn loudness on or off.

d BAND button

Press to select among three FM bands and

one AM band and to cancel control modes

of functions.

Remote control

Operation is the same as when using the but-

tons on the head unit. See the explanation of

the head unit about the operation of each but-

ton with the exception of ATT, which is ex-

plained below.

f

2

g

1

h

6

d

e

3

e VOLUME button

Press to increase or decrease the volume.

f ATT button

Press to quickly lower the volume level by

about 90%. Press once more to return to the

original volume level.

<

QRD3017-A

/

N>5

Operating this unit

En

5

English

Section

02

Black plate (6,1)

g SOURCE button

Press to cycle through all the available

sources. Press and hold to turn the source

off.

h PAUSE button

Press to turn pause on or off.

Display indication

3

2

1

4 5 6 7

1 Main display section

Shows the various information such as

band, play time, and other setting.

! Tuner

Band and frequency are displayed.

! Built-in CD Player

Elapsed playback time and literal infor-

mation are displayed.

2 Preset number/track number indicator

Shows the track number or preset number.

! If a track number 100 or more is selected,

d on the left of the track number indica-

tor will light.

3 MP3/WMA indicator

Shows the type of the currently playing disc.

4 RPT indicator

Shows when repeat play is turned on.

5 LOUD indicator

Appears when loudness is on.

6 5 (stereo) indicator

Appears when the selected frequency is

being broadcast in stereo.

7 LOC indicator

Appears when local seek tuning is on.

Basic Operations

Power ON/OFF

Tur ning the unit on

% Press SOURCE to turn the unit on.

Tur ning the unit off

% Press SOURCE and hold until the unit

turns off.

Selecting a source

You can select a source you want to listen to.

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources.

Tuner—Built-in CD player—AUX

Notes

! In the following cases, the sound source will

not change.

— When there is no disc in the unit.

— When AUX (auxiliary input) is set to off

(refer to page 12).

! AUX is set to on by default. Turn off the AUX

when not in use (refer to Switching the auxili-

ary setting on page 12).

! When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when

this unit’s source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Turn VOLUME to adjust the sound level.

<QRD3017-A

/

N>6

Operating this unit

En

6

Section

02

Black plate (7,1)

Tuner

Listening to the radio

Important

If you are using this unit in North, Central or

South America, reset the AM tuning step (see

Setting the AM tuning step on page 11).

1 Press SOURCE to select the tuner.

2 Press BAND to select a band.

Press BAND until the desired band (F1, F2, F3

for FM or AM) is displayed.

3 To perform manual tuning, briefly press

c or d.

4 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

# While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as you

release c or d.

Storing and recalling broadcast

frequencies

% When you find a frequency that you

want to store in memory, press one of pre-

set tuning buttons 1 to 6 and hold until the

preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 18 FM stations, six for each of the three

FM bands, and six AM stations can be stored in

memory.

# Press a or b to recall radio station frequen-

cies.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press FUNCTION to select LOCAL.

2 Press a or b to turn local seek tuning

on or off.

3 Press c or d to set the sensitivity.

FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1 to 6.

Once stored you can tune in to those frequen-

cies with the touch of button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 1 to 6.

1 Press FUNCTION to select BSM.

2 Press a to turn BSM on.

The six strongest broadcast frequencies are

stored in the order of their signal strength.

# To cancel the storage process, press b.

Built-in Player

Playing a disc

1 Insert a CD (CD-ROM) into the disc load-

ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

<QRD3017-A

/

N>7

Operating this unit

En

7

English

Section

02

Black plate (8,1)

# You can eject a CD (CD-ROM) by pressing

EJECT.

2 Press a or b to select a folder when

playing a compressed audio.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no

files, playback commences with folder 02.

3 To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c

or d enables you to search every 10 tracks in the

current disc (folder). (Refer to Searching every 10

tracks in the current disc or folder on the next

page.)

4 To skip back or forward to another

track, press c or d.

Notes

! Read the precautions for discs and player on

page 17.

! If an error message such as ERROR-11 is dis-

played, refer to Error messages on page 17.

! There is sometimes a delay between starting

up disc playback and the sound being issued.

When being read, FRMTREAD is displayed.

! When playing CD-EXTRA or MIXED-MODE

CDs, compressed audio and CD-DA can be

switched by pressing BAND.

! If you have switched between compressed

audio and CD-DA, playback starts at the first

track on the disc.

! The built-in CD player can play back com-

pressed audio recorded on CD-ROM. (Please

see the following section for files that can be

played back. Refer to page 18.)

! When playing back VBR (variable bit rate) re-

corded files, elapsed play time may not be dis-

played correctly.

! When playing compressed audio, there is no

sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within

the selected repeat play range.

1 Press FUNCTION to select RPT.

2 Press c or d to select the repeat range.

DSC – Repeat all tracks

TRK – Repeat the current track

FLD – Repeat the current folder

# If you select another folder during repeat play,

the repeat play range changes to disc repeat.

# When playing CD, performing track search or

fast forward/reverse cancels the repeat play auto-

matically.

# When playing compressed audio, performing

track search or fast forward/reverse during TRK

(track repeat) changes the repeat play range to

folder repeat.

# When FLD (folder repeat) is selected, it is not

possible to play back a subfolder of that folder.

# To return to the normal display, press BAND.

Playing tracks in random order

Tracks in a selected repeat range are played in

random order.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Press FUNCTION to select RDM.

3 Press a or b to turn random play on or

off.

When random play is on, RDM appears in the

display.

If you turn random play on during folder re-

peat, FRDM appears in the display.

# To return to the normal display, press BAND.

Scanning tracks or folders

Scan play searches the song within the se-

lected repeat range.

1 Select the repeat range.

Refer to Repeating play on this page.

<

QRD3017-A

/

N>8

Operating this unit

En

8

Section

02

Black plate (9,1)

2 Press FUNCTION to select SCAN.

3 Press a to turn scan play on.

SCAN appears in the display. The first 10 sec-

onds of each track is played.

# If you turn scan play on during FLD, FSCN ap-

pears in the display.

4 When you find the desired track press

b to turn scan play off.

# If the display has automatically returned to

the playback display, select SCAN again by press-

ing FUNCTION.

# After scanning of a disc (folder) is finished,

normal playback of the tracks begins.

Pausing disc playback

Pause lets you temporarily stop playback of

the disc.

1 Press FUNCTION to select PAUSE.

2 Press a or b to turn pause on or off.

# To return to the normal display, press BAND.

Using compression and BMX

Using the COMP (compression) and BMX

functions let you adjust the sound playback

quality of this unit.

1 Press FUNCTION to select COMP OFF.

2 Press a or b to select your favorite set-

ting.

COMP OFF—COMP 1—COMP 2—

COMP OFF—BMX 1—BMX 2

# To return to the normal display, press BAND.

Searching every 10 tracks in the

current disc or folder

You can switch the search method between

fast forward/reverse and searching every 10

tracks. Selecting ROUGH enables you to

search every 10 tracks.

1 Press FUNCTION to select FF/REV.

# If the search method ROUGH has been pre-

viously selected, ROUGH will be displayed.

2 Press d to select ROUGH.

! FF/REV – Fast forward and reverse

! ROUGH – Searching every 10 tracks

# To select FF/REV, press c.

3 Press BAND to return to the playback

display.

4 Press and hold c or d to search every

10 tracks on a disc (folder).

# If the rest of track number is less than 10,

press and hold c or d recalls the first (last) one.

Displaying text information on

disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

For CD TEXT discs

Play time—DISC TTL (disc title)—ART NAME

(disc artist name)—TRK TTL (track title) —

ART NAME (track artist name)

For WMA/MP3

Play time—FOLDER (folder name)—FILE (file

name)—TRK TTL (track title)—ART NAME (ar-

tist name)—ALBM TTL (album title)—

COMMENT (comment)—Bit rate

For WAV

Play time—FOLDER (folder name)—FILE (file

name)—Sampling frequency

Notes

! You can scroll to the left of the title by pressing

and holding DISPLAY.

! Audio CD that contains certain information

such as text and/or number is CD TEXT.

! If specific information has not been recorded

on a disc, NO XXXX will be displayed (e.g.,

NO T-TTL).

! When playing back VBR (variable bit rate)-re-

corded WMA files, the average bit rate value is

displayed.

<QRD3017-A

/

N>9

Operating this unit

En

9

English

Section

02

Black plate (10,1)

! When playing back VBR (variable bit rate)-re-

corded MP3 files, VBR is displayed instead of

bit rate value.

! Depending on the version of iTunes used to

write MP3 files onto a disc, comment informa-

tion may not be correctly displayed.

— iTunes is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

! The sampling frequency shown in the display

may be abbreviated.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen-

ing environment in all occupied seats.

1 Press AUDIO to select FAD.

2 Press a or b to adjust front/rear speak-

er balance.

FAD F15 to FAD R15 is displayed.

# FAD 0 is the proper setting when only two

speakers are used.

3 Press c or d to adjust left/right speaker

balance.

BAL L15 to BAL R15 is displayed.

# To return to the normal display, press BAND.

Using the equalizer

There are six stored equalizer settings such as

DYNAMIC, VOCAL, NATURAL, CUSTOM,

FLAT and POWERFUL that can easily be re-

called at any time.

! CUSTOM is an adjusted equalizer curve

that you create.

! When FLAT is selected no supplement or

correction is made to the sound.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

1 Press AUDIO to select BASS/MID/

TREBLE.

2 Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased

or decreased.

# To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

2 Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press-

ing and holding EQ.

3 Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM volume level,

which remains unchanged.

! The AM volume level can also be adjusted

with source level adjustments.

1 Compare the FM volume level with the

level of the source you wish to adjust.

2 Press AUDIO to select SLA.

<

QRD3017-A

/

N>10

Operating this unit

En

10

Section

02

Black plate (11,1)

3 Press a or b to adjust the source vo-

lume.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

# To return to the normal display, press

BAND.

Other Functions

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Press SOURCE and hold until the unit

turns off.

2 Press SOURCE and hold until function

name appears in the display.

3 Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

Clock—FM (FM tuning step)—AM (AM tuning

step)—AUX (auxiliary input)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding

down SOURCE until the unit turns off.

Setting the clock

Use these instructions to set the clock.

1 Press FUNCTION to select clock.

Refer to Adjusting initial settings on this page.

2 Press c or d to select the segment of

the clock display you wish to set.

Pressing c or d will select one segment of the

clock display:

Hour—Minute

3 Press a or b to put a clock right.

Tur ning the clock display on or off

You can turn the clock display on or off.

! Even when the sources are off, the clock

display appears on the display.

% Press CLOCK to turn the clock display

on or off.

Each press of CLOCK turns the clock display

on or off.

# The clock display disappears temporarily

when you perform other operations, but the clock

display appears again after 25 seconds.

Setting the FM tuning step

The FM tuning step employed by seek tuning

can be switched between 100 kHz, the preset

step, and 50 kHz.

! If seek tuning is performed in 50 kHz steps,

stations may be tuned in imprecisely. Tune

in the stations with manual tuning or use

seek tuning again.

1 Press FUNCTION to select FM.

Refer to Adjusting initial settings on this page.

2 Press c or d to select the FM tuning

step.

Press c to select 50 (50 kHz). Press d to se-

lect 100 (100 kHz).

Setting the AM tuning step

The AM tuning step can be switched between

9 kHz, the preset step, and 10 kHz. When

using the tuner in North, Central or South

America, reset the tuning step from 9 kHz (531

kHz to 1 602 kHz allowable) to 10 kHz (530 kHz

to 1 640 kHz allowable).

1 Press FUNCTION to select AM.

Refer to Adjusting initial settings on this page.

2 Press c or d to select the AM tuning

step.

Press c to select 9 (9 kHz). Press d to select

10 (10 kHz).

<

QRD3017-A

/

N>11

Operating this unit

En

11

English

Section

02

Black plate (12,1)

Switching the auxiliary setting

It is possible to use auxiliary device with this

unit. Activate the auxiliary setting when using

auxiliary device connected to this unit.

1 Press FUNCTION to select AUX.

Refer to Adjusting initial settings on the pre-

vious page.

2 Press a or b to turn the auxiliary set-

ting on or off.

Using the AUX source

% Insert the stereo mini plug into the

input jack on this unit.

Selecting AUX as the source

% Press SOURCE to select AUX as the

source.

<QRD3017-A

/

N>12

Operating this unit

En

12

Section

02

Black plate (13,1)

Important

! When this unit is installed in a vehicle without

ACC (accessory) position on the ignition

switch, red cable must be wired to the term-

inal that can detect the operation of the igni-

tion key. Otherwise, battery drain may result.

O

N

S

T

A

R

T

O

F

ACC position No ACC position

! Use of this unit in conditions other than the

following could result in fire or malfunction.

— Vehicles with a 12-volt battery and negative

grounding.

— Speakers with 50 W (output value) and 4

ohm to 8 ohm (impedance value).

! To prevent a short-circuit, overheating or mal-

function, be sure to follow the directions

below.

— Disconnect the negative terminal of the

battery before installation.

— Secure the wiring with cable clamps or ad-

hesive tape. To protect the wiring, wrap ad-

hesive tape around them where they lie

against metal parts.

— Place all cables away from moving parts,

such as gear shift and seat rails.

— Place all cables away from hot places,

such as near the heater outlet.

— Do not pass the yellow cable through a

hole into the engine compartment to con-

nect to a battery.

— Cover any disconnected cable connectors

with insulating tape.

— Do not shorten any cables.

— Never cut the insulation of the power cable

of this unit in order to share the power

with other devices. Current capacity of the

cable is limited.

— Use a fuse of the rating prescribed.

— Never wire the speaker negative cable di-

rectly to ground.

— Never band together multiple speaker’s ne-

gative cables.

! Control signal is output through blue/white

cable when this unit is powered on. Connect it

to an external power amp’s system remote

control or the vehicle’s auto-antenna relay

control terminal (max. 300 mA 12 V DC). If the

vehicle is equipped with a glass antenna, con-

nect it to the antenna booster power supply

terminal.

! Never connect blue/white cable to external

power amp’s power terminal. Also, never con-

nect it to the power terminal of the auto anten-

na. Other wise, battery drain or malfunction

may result.

! Black cable is ground. This cable and other

product’s ground cable (especially, high-cur-

rent products such as power amp) must be

wired separately. Otherwise, fire or malfunc-

tion may result if they are accidentally de-

tached.

<QRD3017-A

/

N>13

Connections

En

13

English

Section

03

Black plate (14,1)

Connection diagram

























Connect with RCA cables

(sold separately)

Rear output

This product

Antenna jack

Fuse (10 A)

Blue/white

Connect to system control terminal of the

power amp or auto-antenna relay control

terminal (max. 300 mA 12 V DC).

Yellow

Connect to the constant 12 V

supply terminal.

Red

Connect to terminal controlled

by ignition switch (12 V DC).

Black (chassis ground)

Connect to a clean, paint-free

metal location.

Power amp

(sold separately)

System remote control

Left Right

Perform these connections when using

the optional amplifier.

Rear speaker Rear speaker

White/black

Violet/black

Violet

With a 2 speaker system, do not connect

anything to the speaker leads that are not

connected to speakers.

Front speaker Front speaker

White

Gray/black

Gray

Green/black

Green

Rear speaker Rear speaker

<QRD3017-A

/

N>14

Connections

En

14

Section

03

Black plate (15,1)

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where :

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

! When installing, to ensure proper heat disper-

sal when using this unit, make sure you leave

ample space behind the rear panel and wrap

any loose cables so they are not blocking the

vents.

DIN front/rear mount

This unit can be properly installed either from

“Front” (conventional DIN front-mount) or

“Rear” (DIN rear-mount installation, utilizing

threaded screw holes at the sides of unit chas-

sis). For details, refer to the following installa-

tion methods.

DIN Front-mount

Installation with the rubber bush

1 Insert the mounting sleeve into the

dashboard.

When installing in a shallow space, use a sup-

plied mounting sleeve. If there is enough

space behind the unit, use factory supplied

mounting sleeve.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°)

into place.

3 Install the unit.

Dashboard Rubber bush

Mounting sleeve Screw

Removing the unit

1 Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with a groove downwards and attach it.)

Trim ring

! It becomes easy to remove the trim ring if

the front panel is released.

2 Insert the supplied extraction keys into

both sides of the unit until they click into

place.

3 Pull the unit out of the dashboard.

<QRD3017-A

/

N>15

Installation

En

15

English

Section

04

Black plate (16,1)

DIN Rear-mount

1 Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with a groove downwards and attach it.)

Trim ring

! It becomes easy to remove the trim ring if

the front panel is released.

2 Determine the appropriate position

where the holes on the bracket and the

side of the unit match.

3 Tighten two screws on each side.

Screw

Mounting bracket Dashboard or console

! Use either truss screws (5 mm × 8 mm) or

flush surface screws (5 mm × 9 mm), de-

pending on the shape of screw holes in the

bracket.

<QRD3017-A

/

N>16

Installation

En

16

Section

04

Black plate (17,1)

Error messages

When you contact your dealer or your nearest

Pioneer Service Center, be sure to have the

error message recorded.

Message Cause Action

ERROR-11, 12,

17, 30

Dirty disc Clean disc.

ERROR-11, 12,

17, 30

Scratched disc Replace disc.

ERROR-10, 11,

12, 15, 17, 30,

A0

Electrical or me-

chanical

Turn the ignition

switch OFF and

back ON, or switch

to a different

source, then back

to the CD player.

ERROR-15 The inserted disc

does not contain

any data

Replace disc.

ERROR-22, 23 The CD format

cannot be played

back

Replace disc.

NO AUDIO The inserted disc

does not contain

any files that can

be played back

Replace disc.

PROTECT All the files on

the inserted disc

are secured by

DRM

Replace disc.

SKIPPED The inserted disc

contains WMA

files that are pro-

tected by DRM

Replace disc.

Handling guideline of discs

and player

! Use only discs featuring either of following

two logos.

! Use only conventional, fully circular discs.

Do not use shaped discs.

! Use 12-cm or 8-cm CD. Do not use an

adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! Do not use cracked, chipped, warped, or

otherwise damaged discs as they may da-

mage the player.

! Unfinalized CD-R/CD-RW disc playback is

not possible.

! Do not touch the recorded surface of the

discs.

! Store discs in their cases when not in use.

! Avoid leaving discs in excessively hot envir-

onments including under direct sunlight.

! Do not attach labels, write on or apply che-

micals to the surface of the discs.

! To clean a CD, wipe the disc with a soft

cloth outward from the center.

! Condensation may temporarily impair the

player’s performance. Leave it to adjust to

the warmer temperature for about one

hour. Also, wipe any dump discs with a soft

cloth.

! Playback of discs may not be possible be-

cause of disc characteristics, disc format,

recorded application, playback environ-

ment, storage conditions, and so on.

<

QRD3017-A

/

N>17

Additional Information

En

17

English

Appendix

Black plate (18,1)

! Text information may not be correctly dis-

played depending on the recorded environ-

ment.

! Road shocks may interrupt disc playback.

! Read the precautions for discs before

using them.

Dual Discs

! Dual Discs are two-sided discs that have a

recordable CD for audio on one side and a

recordable DVD for video on the other.

! Since the CD side of Dual Discs is not phy-

sically compatible with the general CD

standard, it may not be possible to play the

CD side with this unit.

! Frequent loading and ejecting of a Dual

Disc may result in scratches on the disc.

Serious scratches can lead to playback pro-

blems on this unit. In some cases, a Dual

Disc may become stuck in the disc loading

slot and will not eject. To prevent this, we

recommend you refrain from using Dual

Disc with this unit.

! Please refer to the information from the

disc manufacturer for more detailed infor-

mation about Dual Discs.

Compressed audio files

! Depending on the version of Windows

Media™ Player used to encode WMA files,

album names and other text information

may not be correctly displayed.

! There may be a slight delay when starting

playback of WMA files encoded with image

data.

! ISO 9660 Level 1 and 2 compliant. Romeo

and Joliet file systems are both compatible

with this player.

! Multi-session playback is possible.

! Compressed audio files are not compatible

with packet write data transfer.

! Only 32 characters from beginning can be

displayed as a file name (including the file

extension) or a folder name.

! Regardless of the length of blank section

between the songs of original recording,

compressed audio discs play with a short

pause between songs.

Example of a hierarchy

: Folder

: Compressed audio file













Level 1 Level 2 Level 3 Level 4

! This unit assigns folder numbers. The user

cannot assign folder numbers.

! Folder selection sequence or other opera-

tion may be altered depending on the en-

coding or writing software.

! Folder hierarchy is allowed up to eight tiers.

However, a practical hierarchy of folder is

less than two tiers.

! Up to 99 folders on a disc can be played

back.

Compressed audio compatibility

WMA

! Compatible format: WMA encoded by

Windows Media Player

! File extension: .wma

! Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps

to 384 kbps (VBR)

! Sampling frequency: 32 kHz to 48 kHz

! Windows Media Audio 9 Professional, Loss-

less, Voice: No

<

QRD3017-A

/

N>18

Additional Information

En

18

Appendix

Black plate (19,1)

MP3

! File extension: .mp3

! Bit rate: 8 kbps to 320 kbps

! Sampling frequency: 16 kHz to 48 kHz (32,

44.1, 48 kHz for emphasis)

! Compatible ID3 tag version: 1.0, 1.1, 2.2,

2.3, 2.4 (ID3 tag Version 2.x is given priority

than Version 1.x.)

! M3u playlist: No

! MP3i (MP3 interactive), mp3 PRO: No

WAV

! Compatible format: Linear PCM (LPCM),

MS ADPCM

! File extension: .wav

! Quantization bits: 8 and 16 (LPCM), 4 (MS

ADPCM)

! Sampling frequency: 16 kHz to 48 kHz

(LPCM), 22.05 kHz to 44.1 kHz (MS AD-

PCM)

<QRD3017-A

/

N>19

Additional Information

En

19

English

Appendix

Black plate (20,1)

Specifications

General

Rated power source ............... 14.4 V DC

(allowable voltage range:

12.0 V to 14.4 V DC)

Grounding system ................... Negative type

Max. current consumption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

Chassis ..................... 178 mm × 50 mm × 162

mm

Nose ........................... 188 mm × 58 mm × 15 mm

D

Chassis ..................... 178 mm × 50 mm × 162

mm

Nose ........................... 170 mm × 48 mm × 15 mm

Weight .......................................... 1.3 kg

Audio

Maximum power output ....... 50 W × 4

Continuous power output ... 22 W × 4 (50 Hz to 15 000

Hz, 5% THD, 4 W load, both

channels driven)

Load impedance ...................... 4 W (4 W to 8 W allowable)

Preout max output level ....... 2.0 V

Tone controls:

Bass

Frequency ................ 100 Hz

Gain ............................ ±13dB

Mid

Frequency ................ 1 kHz

Gain ............................ ±12 dB

Treble

Frequency ................ 10 kHz

Gain ............................ ±12 dB

CD player

System .......................................... Compact disc audio system

Usable discs .............................. Compact disc

Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-

work)

Number of channels .............. 2 (stereo)

WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch

audio)

(Windows Media Player)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WAV signal format .................. Linear PCM & MS ADPCM

FM tuner

Frequency ran ge ...................... 87.5 MHz to 108.0 MHz

Usable sensitivity ..................... 11 dBf (0.7 µV/75 W, mono,

S/N: 30 dB)

Signal-to-noise ratio ............... 72 dB (IEC-A network)

AM tuner

Frequency ran ge ...................... 531 kHz to 1 602 kHz (9 kHz)

530 kHz to 1 640 kHz (10

kHz)

Usable sensitivity ..................... 25 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 62 dB (IEC-A network)

Infrared remote control

Wavelength ................................. 940 nm ±50 nm

Output ........................................... typ; 12 mw/sr per Infrared

LED

Note

Specifications and the design are subject to mod-

ifications without notice due to improvements.

<QRD3017-A

/

N>20

Additional Information

En

20

Appendix

ページが読み込まれています...

Pioneer DEH-1150MP ユーザーマニュアル

このマニュアルも適しています

Pioneer DEH-1150MP ユーザーマニュアル

他の言語で

その他のドキュメント