Sony DRC-BT15N 取扱説明書

Wireless

Audio Receiver

3-280-224-61(1)

DRC-BT15N

Operating Instructions

GB

CT

2

GB

WARNING

To reduce the risk of fire or electric

shock, do not expose this

apparatus to rain or moisture.

To reduce the risk of electrical

shock, do not open the cabinet.

Refer servicing to qualified

personnel only.

Do not install the appliance in a confined

space, such as a bookcase or built-in

cabinet.

To reduce the risk of fire, do not cover the

ventilation of the apparatus with

newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the

apparatus.

To reduce the risk of fire or electric

shock, do not place objects filled with

liquids, such as vases, on the apparatus.

Connect the AC power adaptor to an

easily accessible AC outlet. Should you

notice an abnormality in the AC power

adaptor, disconnect it from the AC outlet

immediately.

Do not expose the batteries (battery pack

or batteries installed) to excessive heat

such as sunshine, fire or the like for a long

time.

Excessive sound pressure from

headphones can cause hearing loss.

The Bluetooth word mark and logos are

owned by the Bluetooth SIG, Inc. and any

use of such marks by Sony Corporation is

under license.

Other trademarks and trade names are

those of their respective owners.

MPEG Layer-3 audio coding technology

and patents licensed from Fraunhofer IIS

and Thomson.

US

3

GB

Table Of Contents

What is Bluetooth wireless

technology? .................. 4

Welcome! .......................... 5

3 steps to Bluetooth function .... 6

Location and Function of

Parts............................... 7

Charging the unit ............. 8

Pairing .............................10

What is pairing? ...................... 10

Procedures of pairing .............. 10

Wearing the unit ............. 12

Indications of Bluetooth

function ....................... 14

Listening to music ......... 15

Controlling the audio device –

AVRCP ............................... 16

Calling ............................. 17

Controlling the Bluetooth mobile

phone – HFP, HSP .............. 19

Calling while playing

back music .................. 20

Disposing of the unit ..... 21

Precautions .................... 22

Troubleshooting ............. 24

Initializing the unit ......... 26

Specifications................. 27

4

GB

What is Bluetooth wireless

technology?

Bluetooth™ wireless technology is

a short-range wireless technology

that enables wireless data

communication between digital

devices, such as a computer or

digital camera. Bluetooth wireless

technology operates within a range

of about 10 meters (about 30 feet).

Connecting two devices as

necessary is common, but some

devices can be connected to

multiple devices at the same time.

You do not need to use a cable for

connection, nor is it necessary for

the devices to face one another, such

is the case with infrared technology.

For example, you can use such a

device in a bag or pocket.

Bluetooth standard is an

international standard supported by

thousands of companies all over the

world, and employed by various

companies worldwide.

Communication System

and Compatible Bluetooth

Profiles of this unit

Profile is standardization of the

function for each Bluetooth device

specification. This unit supports the

following Bluetooth version and

profiles:

Communication System :

Bluetooth Specification version 2.0 +

EDR*

1

Compatible Bluetooth Profiles:

– A2DP (Advanced Audio Distribution

Profile): Transmitting or receiving

audio content of high-quality.

– AVRCP (Audio Video Remote Control

Profile): Controlling A/V equipment;

pausing, stopping, starting playback,

volume control, etc.

– HSP (Headset Profile)*

2

: Talking on the

phone/Operating the phone.

– HFP (Hands-free Profile)*

2

: Talking on

the phone/Operating the phone by

hands-free.

*

1

Enhanced Data Rate

*

2

When you use a Bluetooth mobile

phone supported by both HFP (Hands-

free Profile) and HSP (Headset

Profile), set to HFP.

Notes

• To be able to use the Bluetooth

function, the Bluetooth device to be

connected requires the same profile as

the unit’s.

Note also that even if the same profile

exists, devices may vary in function

depending on their specifications.

• Due to the characteristic of Bluetooth

wireless technology, the sound played

on this unit is slightly delayed from the

sound played on the Bluetooth device

during talking on the telephone or

listening to the music.

5

GB

Welcome!

Thank you for purchasing this Sony Wireless Audio Receiver. This unit uses

Bluetooth wireless technology.

• Enjoy music wirelessly from Bluetooth technology-enabled music players,

or mobile phones.*

1

• Connect your favorite headphones via stereo mini jack (headphones are

sold separately).

• Talk hands-free with Bluetooth technology-enabled mobile phones.*

2

• Do basic remote control operation (play, stop, etc.) of music player

functions via Bluetooth connection.*

3

• Bluetooth version 2.0 + EDR (Enhanced Data Rate) for higher quality

audio with less interference and lower power consumption.

• Useful rechargeable function.

For details on Bluetooth wireless technology, see page 4.

Listening to musicTalking on the phone

*

1

The connected Bluetooth device is required to support A2DP (Advanced Audio

Distribution Profile).

*

2

The connected Bluetooth device is required to support HFP (Hands-free Profile) or

HSP (Headset Profile).

*

3

The connected Bluetooth device is required to support AVRCP (Audio Video Remote

Control Profile).

6

GB

V

Calling

V

Listening to music

V

3 steps to Bluetooth function

Bluetooth

mobile phone,

etc.

Pairing

Wireless Audio

Receiver

Bluetooth connection

Operate the Bluetooth device to

make the Bluetooth connection.

Connection

Listening to music

You can listen to music played on

the Bluetooth device.

Playback, stop, or pause is

possible from this unit.

Music

Bluetooth connection

When the unit is turned on, the

unit starts making the Bluetooth

connection to the recognized

mobile phone automatically.

Talking on the phone

You can make and receive a call

by operating this unit.

Pairing

First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this

unit with each other. Once pairing is established, there is no need for

pairing again.

Voice

Connection

A2DP

AVRCP

HFP HSP

c Page 10 - 11

c Page 15

c Page 17 - 18

c Page 18 - 20c Page 15 - 16

7

GB

V

O

L

P

OWER

V

O

L

.

Nx

7

9 q;

4

1

3

2

5

6

qa

8

Location and Function of Parts

1 Headphones jack

2 Strap hole

3 Clip hole

4 Indicator (red)

Indicates the power status of the

unit.

5 Microphone

6 Multi function button

Controls various call functions.

7 Indicator (blue)

Indicates the communication

status of the unit.

8 Jog switch

Controls various functions

when listening to music.

Adjust the volume of this unit

when talking over the

telephone.

9 RESET button

0 Contact point

qa POWER button

GETTING STARTED

8

GB

D

C

I

N

3

V

1 Connect the supplied

AC power adaptor with

the battery charging

stand.

2 Connect the supplied

AC power adaptor to an

AC outlet.

(Rear)

To DC IN

3 V jack

AC power

adaptor (supplied)

Battery charging

stand (supplied)

3 Put the unit on the

battery charging stand.

Rest the unit on the battery

charging stand so that the unit’s

contact point meets the contact

pin on the battery charging stand,

and make sure that the indicator

(red) lights up.

Charging is completed in about

2.5 hours* and the indicator (red)

goes off automatically.

* Time required for empty battery to

recharge.

Note

When you attach the strap to this unit,

do not let the strap get caught between

the unit and the battery charging stand.

Tips

• If the AC power adaptor is connected to

an AC outlet while the unit is turned on,

the unit will be turned off automatically.

• This unit cannot be turned on while

charging.

Battery charging

stand (supplied)

To an AC outlet

Charging the unit

The unit contains a rechargable Lithium-Ion battery, which should be

charged before using for the first time.

Contact pin

Battery charging

stand (supplied)

Wireless Audio

Receiver

9

GB

Approx.

usage hours

6 hours

100 hours

Status

Full

Mid

Low (needs to

charge)

Caution

If this unit detects a problem while

charging, the indicator (red) may

turn off, although charging is not

complete.

Check for the following causes:

– Ambient temperature exceeds the

range of 0 °C – 40 °C (32 °F –

104 °F).

– There is a problem with the

battery.

In this case, charge again within the

above-mentioned temperature range.

If the problem persists, consult your

nearest Sony dealer.

Notes

• If the battery is not used for a long time,

battery may be quickly depleted,

however, after a few recharges, battery

life will improve.

• If the life of the built-in rechargeable

battery drops to half the normal length,

the battery should be replaced. Consult

your nearest Sony dealer for

replacement of the rechargeable battery.

• Avoid exposure to temperature

extremes, direct sunlight, moisture,

sand, dust or mechanical shock. Never

leave in a car parked in the sun.

• Use only the supplied AC power

adaptor. Do not use any other AC

power adaptor.

Usage hours

*

Status

Communication

time (including

music playback

time) (up to)

Standby time

(up to)

* Time stated above may vary, depending

on ambient temperature or conditions of

use.

Checking the remaining

battery

When pressing the POWER button

while the unit is turned on, the

indicator (red) flashes. You can

check the remaining battery by the

number of times the indicator (red)

flashes.

Indicator (red)

3 times

2 times

1 time

Note

You cannot check the remaining battery

immediately after the unit is turned on, or

while pairing.

When the battery is almost empty

The indicator (red) flashes slowly

automatically.

When the battery becomes empty, a

beep sounds and the unit will turn

off automatically.

10

GB

Procedures of pairing

1 Place the Bluetooth

device within 1 m (3 ft)

of this unit.

2 Press and hold the

POWER button for

7 seconds or more to

standby for pairing

while the unit is turned

off.

Notes

• After about 3 seconds, power is

turned on and the indicator (blue)

and indicator (red) flash together

twice. Keep the POWER button

pressed without releasing. The

indicator (blue) starts flashing.

When both indicators start flashing

together again, release the button.

This unit enters into pairing mode.

• If pairing is not established within

about 5 minutes, pairing mode will

be cancelled and this unit will turn

off. In this case, start over from

step 1.

Pairing

What is pairing?

Bluetooth devices need to be

“paired” with each other

beforehand.

Once Bluetooth devices are paired,

there is no need for pairing again,

except in the following cases:

• Pairing information is deleted

after repair, etc.

• This unit is paired with 9 or more

devices.

This unit can be paired with up to

8 devices; if a new device is

paired after 8 devices have been

paired, the device whose latest

connection time is the oldest

among the 8 paired devices is

replaced by the new one.

• When recognition of the unit by

the device to be connected is

deleted.

• This unit is initialized (page 26).

All pairing information is deleted.

11

GB

3 Perform pairing

procedure on the

Bluetooth device to

detect this unit.

The list of detected devices

appears on the display of the

Bluetooth device. This unit is

displayed as “DRC-BT15.”

If “DRC-BT15” is not

displayed, repeat from step 1.

Notes

• For details, refer to the operating

instructions supplied with the

Bluetooth device.

• When pairing with a Bluetooth

device that cannot display a list of

detected devices or that has no

display, you may pair the device by

setting both this unit and the

Bluetooth device to pairing mode.

At this time, if passcode is set

besides “0000” on the Bluetooth

device, pairing cannot be done with

this unit.

4 Select “DRC-BT15” on

the display of the

Bluetooth device.

5 If Passcode* input is

required on the display

of a Bluetooth device,

input “0000.”

Pairing is complete when the

indicator (blue) flashes slowly.

The message standing for

“Pairing complete” appears on

the display of some Bluetooth

devices.

* Passcode may be called “Passkey,”

“PIN code,” “PIN number,” or

“Password.”

6 Start the Bluetooth

connection from the

Bluetooth device.

This unit memorizes the device

as the last connected device.

Some Bluetooth devices may

connect with the unit

automatically when pairing is

complete.

Tips

• To pair with other Bluetooth devices,

repeat steps 1 to 5 for each device.

• To delete all pairing information, see

“Initializing the unit” (page 26).

12

GB

Wearing the unit

3 Connect the

headphones (not

supplied) to this unit.

4 Clip this unit to a

pocket, etc., of your

clothes and then wear

the headphones.

Wear the earphone marked L in

your left ear, and the one

marked R in your right ear.

When using the clip

1 While pinching the lever

at the end of the clip

(supplied), hold the clip

across the unit as

shown, then insert the

clip into the clip hole.

2 While pinching the

lever, turn the unit

counterclockwise.

When the lever is released, the

clip is locked to prevent it from

coming off.

Lever

13

GB

When using the strap

1 Attach the strap

(supplied) to this unit

through the strap hole.

2 Connect the

headphones (not

supplied) to the unit.

3 Place this unit around

your neck and then

wear the headphones.

Wear the earphone marked L in

your left ear, and the one

marked R in your right ear.

14

GB

Pairing

Connecting

Connected

Phone

Music

Indications of Bluetooth function

B : Indicator (blue)

R : Indicator (red)

Status Flashing patterns

Searching

B

– – – – – – – –

...

R

– – – – – – – –

...

Connectable

B

– – – – – – – – – –

...

R

–

Connecting

B

– – – – – – – – – –

...

R

– – – – – – – – – –

...

HFP/HSP or A2DP

B

– – – – – – – – – – – – – –

...

(standby for receiving audio signal)

R

–

HFP/HSP and A2DP

B

– – – – – – – – – – – –

...

(standby for receiving audio signal)

R

–

Listening

B

– – – – – – – – – – – –

...

R

–

Listening during standby

B

– – – – – – – – – –

...

for telephone call

R

–

Incoming call

B

...

R

–

Talking

B

– – – – – – – – – – – –

...

R

–

Calling while

B

– – – – – – – – – –

...

playing back music

R

–

15

GB

VOL

.

Nx

Check the following before

operating the unit.

– The Bluetooth device is turned

on.

– Pairing of this unit and the

Bluetooth device is complete.

– The Bluetooth device supports the

transmitting music function

(profile: A2DP*).

1 Press and hold the

POWER button for

about 3 seconds while

the unit is turned off.

The indicator (blue) and

indicator (red) flash together

twice and the unit is turned on.

Notes

• Do not press and hold the POWER

button for more than 7 seconds,

otherwise pairing mode is entered.

• After the unit is turned on, the unit

attempts to connect to the last

connected Bluetooth device

automatically with HFP or HSP.

Listening to music

When not calling with this unit, do

not make the last connected

Bluetooth device ready for HFP or

HSP connection. To make or

receive a call while playing back

music, see page 20.

2 Make the Bluetooth

connection (A2DP) from

a Bluetooth device to

this unit.

Refer to the operating

instructions supplied with the

Bluetooth device on how to

operate it.

3 Start playback on the

Bluetooth device.

Tip

Bluetooth connection of A2DP

(Advanced Audio Distribution Profile)

can also be operated with the jog switch

from this unit to the Bluetooth device

except when making a call on this unit.

Notes

• When you play music by connecting the

unit to a Bluetooth device using HSP

(Headset Profile), sound quality will not

be high. For better sound, change the

Bluetooth connection to A2DP by

operating the Bluetooth device.

• If this unit is turned off while an A2DP

Bluetooth connection is established,

operate the unit again from step 1 to

make the A2DP Bluetooth connection

again.

* For detail on profiles, see page 4.

OPERATING THE UNIT

POWER button

Continued

Jog

switch

16

GB

To adjust the volume

Push the jog switch up or down

while listening to music to adjust the

volume.

Tips

• Depending on the connected device, it

may be necessary to adjust the volume

on the connected device as well.

• Volume for calling and listening to

music can be adjusted independently.

Even if you change the volume while

calling, the volume for music playback

does not change.

To stop use

1 Terminate the Bluetooth

connection by operating

the Bluetooth device.

2 Press and hold the

POWER button for

about 3 seconds.

The indicator (blue) and

indicator (red) light up together,

and the unit turns off.

Tip

When you finish playing music, the

Bluetooth connection may terminate

automatically, depending on the

Bluetooth device.

Controlling the audio

device – AVRCP

If the Bluetooth audio device

connected with this unit supports

AVRCP (Audio Video Remote

Control Profile), you can control by

using the unit buttons.

Refer to the operating instructions

supplied with the Bluetooth device

on how to operate it.

Note

Operation of the Bluetooth connecting

device by this unit will vary depending on

its specification.

Status: In stop or pause mode

1 Starts playback*

1

2 Stop

3 Skip to next/previous

4 Fast-forward/Fast-rewind*

2

Status: In play mode

5 Pause*

1

6 Stop

7 Skip to next/previous

8 Fast-forward/Fast-rewind*

2

*

1

You may need to press the button

twice depending on the Bluetooth

device.

*

2

Some

Bluetooth

devices may not

operate.

Note

You cannot adjust the volume of the

Bluetooth device by pushing the jog

switch of this unit up or down.

1

3

Short Press Long Press

Nx

.

/

>

2

4

Short Press Long Press

Nx

.

/

>

5

7

6

8

17

GB

Check the following before

operating the unit.

– The Bluetooth function is active

on the mobile phone.

– Pairing of this unit and the

Bluetooth mobile phone is

complete.

1 Press and hold the

POWER button for

about 3 seconds while

the unit is turned off.

The indicator (blue) and

indicator (red) flash together

twice, the unit turns on and then

this unit tries to connect to the

last Bluetooth mobile phone that

was used.

Note

Do not press and hold the POWER

button for more than 7 seconds,

otherwise pairing mode is entered.

Tip

This unit will stop trying to connect

to the Bluetooth mobile phone after 1

minute. In such a case, press the multi

function button to try to connect

again.

VOL

.

Nx

When this unit does not

connect to a Bluetooth

mobile phone automatically

You can make a connection by

operating Bluetooth mobile phone

or by operating this unit to connect

the last connected Bluetooth device.

A To make a connection

by operating Bluetooth

mobile phone

1 Make the Bluetooth

connection (HFP or

HSP*) from the

Bluetooth mobile phone

to this unit.

Refer to the manual supplied

with your Bluetooth mobile

phone for operation details.

The list of recognized devices

appears on the display of the

Bluetooth mobile phone. This

unit is displayed as

“DRC-BT15.”

When you use the Bluetooth

mobile phone features both HFP

(Hands-free Profile) and HSP

(Headset Profile), set to HFP.

Note

When connecting to a Bluetooth

mobile phone which is different from

the last connected one, make the

connection following the above

procedure.

* For details on profiles, see

page 4.

Calling

Continued

Jog

switch

Multi function button

POWER button

18

GB

– ring tone set on the unit

– ring tone set on the mobile

phone

– ring tone set on the mobile

phone only for Bluetooth

connection

Note

If you received a call by pressing the

button on the Bluetooth mobile phone,

some Bluetooth mobile phones may have

handset use priority. In this case, set to

talk with the unit by pressing and holding

the multi function button for about 2

seconds, or by operating the Bluetooth

mobile phone. For details, refer to the

manual supplied with your Bluetooth

mobile phone.

To adjust the volume

Push the jog switch up or down to

adjust the volume.

Tips

• You cannot adjust the volume when not

communicating.

• Volume for calling and listening to

music can be adjusted independently.

Even if you change the volume while

playing back the music, the volume of a

call does not change.

To terminate a call

You can end a call by pressing the

multi function button on the unit.

To stop use

1

Terminate Bluetooth

connection by the

Bluetooth mobile phone.

2

Press and hold the

POWER button for about

3 seconds to turn off the

power.

The indicator (blue) and

indicator (red) light up together,

and the unit turns off.

B To make a connection

with the last connected

Bluetooth device by

operating this unit

1 Press the multi function

button.

The indicator (blue) and

indicator (red) start flashing at

the same time, and the unit

performs the connection

operation for about 5 seconds.

Note

When listening to music with this unit, a

Bluetooth connection cannot be made

with the multi function button.

To call

1 Use the buttons on your

mobile phone when

making a call.

If no dial tone is heard on this

unit, press and hold the multi

function button for about 2

seconds.

Tip

You can call in the following way,

depending on the Bluetooth mobile

phone. Refer to the manual supplied with

your mobile phone on operating details.

– When not communicating, you can call

using the voice-dial function by

pressing the multi function button.

– You can call the last dialed number by

pressing the multi function button for

about 2 seconds.

To receive a call

When an incoming call arrives, a ring

tone will be heard from the unit.

1 Press the multi function

button on the unit.

The ring tone differs in the

following ways, depending on

your mobile phone.

19

GB

Controlling the

Bluetooth mobile

phone – HFP, HSP

The operation of the buttons on this

unit varies depending on your

mobile phone.

HFP (Hands-free Profile) or HSP

(Headset Profile) is used for

Bluetooth mobile phone. Refer to

the operating instructions supplied

with your Bluetooth mobile phone

on supported Bluetooth profiles or

how to operate.

HFP (Hands-free Profile)

HSP (Headset Profile)

*

1

Some functions may not be supported

depending on the Bluetooth mobile

phone. Refer to the operating

instructions supplied with your mobile

phone.

*

2

This may vary, depending on the

Bluetooth mobile phone.

*

3

Some functions may not be supported

when calling using the Bluetooth

mobile phone.

Status Multi function button

Standby

Voice Dial

active

Outgoing call

Incoming call

During call

Short Press

Start Voice

Dial*

1

Cancel Voice

Dial*

1

End outgoing

call

Answer

End call

Long Press

Last number

redial

–

Reject

Change call

device

Status Multi function button

Standby

Outgoing call

Incoming call

During call

Short Press

–

End outgoing

call

*

1

Answer

End call

*

3

Long Press

Dial

*

1

End outgoing

call or change

call device to

headset*

2

–

Change call

device to

headset

20

GB

Calling while playing back music

The Bluetooth connection using HFP or HSP as well as A2DP is necessary

to make a call while playing back music.

For example, to make a call using a Bluetooth mobile phone while listening

to music on a Bluetooth compatible music player, this unit needs to be

connected to the mobile phone using HFP or HSP.

Make a Bluetooth connection between this unit and the

device in use following the procedures outlined below.

1 Make a Bluetooth connection between this unit and

the mobile phone in use with HFP or HSP following

the procedures outlined in “Calling” (see page 17).

2 Operate the Bluetooth device (music player or mobile

phone) used for playing the music to make a

Bluetooth connection to this unit using A2DP.

To receive a call while

playing back music

When an incoming call arrives, the

music pauses and the ring tone is

heard from this unit.

1 Press the multi function

button and talk.

After finishing the call, press the

multi function button. This unit

is switched back to music

playback.

When no ring tone is heard

even if an incoming call

arrives

1 Stop music playback.

2 When ringing, press the

multi function button

and talk.

To make a call while

playing back music

1 Press the multi function

button while playing

back music (page 19), or

operate your Bluetooth

mobile phone to make a

telephone call.

If no dial tone is heard on this

unit, press and hold the multi

function button for about 2

seconds.

ページが読み込まれています...

Sony DRC-BT15N 取扱説明書

Sony DRC-BT15N 取扱説明書

他の言語で

関連論文

その他のドキュメント