Kyosho MZW417@Metal Servo Geari4th/MR-03) ユーザーマニュアル

タイプ
ユーザーマニュアル
Before beginning assembly, please read these instructions thoroughly!
Metal Servo Gear (4th / MR-03)
for MINI-Z RACER MR-03
Thank you for purchasing this set. Before
installation, please carefully read and follow the
instructions on this sheet in conjunction with the
instruction manual in your MINI-Z RACER MR-03.
CAUTION
The strength and accuracy of the servo
unit will increase by installing this
durable metal servo gear.
Be sure to remove the battery for operation before assembling
or disassembling the chassis.
R
THE FINEST RADIO CONTROL MODELS
INSTRUCTION SHEET
No.MZW417
MZW417-T01
With referring to the instruction manual of the MR-03, remove the RC unit and
disassemble the servo gear unit.
Replace gear (A) with the metal servo gear and reassemble the chassis.
PRINTED IN JAPAN61921005-1
© Copyright 2010 KYOSHO CORPORATION
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.kyosho.com
www.mini-z.jp
243-0034 153
046-229-4115
() 13001900
/
Tools : Must be prepared
*A Phillips Screwdriver (Precision type or a small sized)
+
+
Steering Servo
(A)
  • Page 1 1

Kyosho MZW417@Metal Servo Geari4th/MR-03) ユーザーマニュアル

タイプ
ユーザーマニュアル