THE FINEST RADIO CONTROL MODELS
R
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Before beginning assembly, please read these instructions thoroughly.
© Copyright 2010 KYOSHO CORPORATION /
MZGTLIM-HS01
Thank you for purchasing the GT Limited from the MINI-Z Racer MR-03 Series.
This product is a special version of the MINI-Z Racer MR-03 Series including selected race-ready
optional parts.
Please use this instruction sheet together with the main instruction manual included with the model.
MINI-Z Racer MR-03
GT Limited
No.MZW1
The optional parts below are included as special features.
Ball Bearing Set
Ball Differential Set
No.MZW13BL
Color Nylon Nut (Blue)
No.MZW37-30
Racing Radial Tire (Front: Narrow 30˚)
(Standard tires are not included)
No.MZW38-20
Racing Radial Tire (Rear: Wide 20˚)
Standard tires are not included)
No.MZW206
Friction Shock Set (RM)
No.MZW207
Rear Oil Shock Set
Front Spring Set
No.MZW216 No.MZW401
No.MZW404
Carbon Rear Suspension Plate Set (for RM/HM)
No.MZW402
Setting Tie-Rod Set
No.MZW412
SP Long King Pin Ball Set
Special Features
Please refer to the instructions included with the optional parts.
1
Higher grade battery terminals (gold plated terminals).
Note: Spare chassis is equipped with normal type battery terminals.
™
2
Page 9
Page 3
< Optional Parts >
Refer to the instructions included for details on settings for the optional parts listed below.
(The chassis shown on the instractions of the optional parts are not the MR-03 but can be installed the same way.)
< or >
For items included that are not referred to in the supplementary instruction sheet, refer to on page 3 of
the main manual .
At time of shipment, the adjustable collar is only temporarily set. Adjust properly to suit the driving conditions.
Some car body shell are not compatible with the friction shock. Go to the website
shown on page 3 and refer to the option parts list for the MR-03 (data table 4) to confirm compatibility with MZW216.
At time of shipment, the oil shock is not filled with oil. Refer to the instructions for the Oil Shock Set and fill with oil.
No.MZW206
Ball Differential Set
No.MZW216
Friction Shock Set (RM)
No.MZW207
Rear Oil Shock Set
About This Model
*Body / Chassis Set
*
BCS
*Chassis Set
*
CS
BCS CS
3mm Spacer2mm Spacers Wheel Nuts
Start Pack
Items shown below are already installed or not required.
Included in the Box
CS
BCS
BCS
BCS
RM
type
RM
type
3
Page 10
RM Chassis Set (Normal)
Chassis (GT Limited)
Carbon Rear Suspension Plate 2 types
Tie-Rod SetFront Spring 4 types
Medium Hard
*Ball Differential Set Contents
*Option Parts Instruction Manual
1.5mm Hex Wrench
Ball Differential Adjust Tool 3x3mm Set Screw
E2 E-ring O-ring P4 x 2 3x5x0.2mm Shim
*Friction Shock Set (RM) Contents
3mm Washer
*Rear Oil Shock Set Contents
Diaphragm
Adjustment Spacers x 3
Silicone Oil (bottle #200)
Hobby Grease (sachet)
Items shown below are already installed or not required.
Items below are additional.
Included in the Box
Wheel Nuts (Spare)
0.5mm Suspension Limiter
Tie-Rod
4
Page 14
Page 15
Start Guide
No work required.
Continue to use the 2mm and 3mm plastic bushings that are installed on the rear left.
Refer to the instructions for the ball differential set for further details.
1
Except for the rear left, all 2mm and 3mm plastic bushings have been replaced with 2x6x2.5mm and 3x6x2.5mm bearings.
Use the wheel wrench to remove the color nylon nuts and install wheels as per .
2
2
2
5
Page 60~61, 63
Exploded View
Refer to spare parts list on page 66 and 67
of the instruction manual regarding spare parts
not listed above.
© Copyright 2010 KYOSHO CORPORATION
The optional parts should be used for the parts marked with .
Steering Servo
OP
OP
No. Description
Ball Bearing Set
MZW1
2520
Color Nylon Nut
MZW13BL
525
Ball Differential Set
MZW206
3360
Rear Oil Shock Set
MZW207
1050
Friction Shock Set (RM)
MZW216
1995
Front Spring Set (for MR-03)
Setting Tie Rod Set (for MR-03)
MZW401
MZW402
1050
840
Carbon Rear Suspension Plate Set (RM/HM/MR-03)
MZW404
1365
SP Long King Pin Ball Set (MR-03)
MZW412
1470
Color Set of Long King Pin Ball (MR-03)
MZW412-1
630
Spare Parts
MZ402
MZ402
MZ402
MZ404
MZ402
MZ405
R/C
6
Page 60~61, 63
Exploded View
It is attached to the body set.
Steering Servo
MZ409
MZW207
MZ409
B
D
A
C
C
A
R/C
OP
MZ409
MZ409
MZ409
MZ402
MZ403
MZ406
MZ408
MZ409
MZ409
MZ402
MZ402
MZ402
MZ409
MZ402
MZ402
MZ401
MZ409
MZ409
MZ409
MZ402
MZW401
MZ406
MZ407
MZ402
MZW412-1
MZ407
MZW412-1
MZ203B
MZW412
MZW1
MZW13BL
MZ409 MZ409
MZW402
(Wide)
MZW402
(Narrow)
MZ406
(Narrow)
MZ406
(Wide)
MZ403
MZW1
MZ401
(Wide)
MZ401
(Narrow)
MZ206B
MZ401
MZW220
MZW207
7
Exploded View
© Copyright 2010 KYOSHO CORPORATION
Optional parts should be used for the parts
marked with .
OP
OP
Page 60~61, 63
RM
type
MZ402
0.8mm
0.5mm
MZW206
MZW206
MZW1
MZW1
MZW206
R/C
MZW13BL
MZ409
MZW404
MZ403
MZ210
MZ409
MZ409
MZW1
MZW13BL
MZ210
MZ6BK
MZ9P
MZ6BK
MZ409
MZW216
MZ409
OP
OP
OP
OP
C
MZ210 MZ6BK
MZ402
D
8
© Copyright 2010 KYOSHO CORPORATION /
61921005-1 PRINTED IN JAPAN
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.mini-z.jp/www.kyosho.com
R
THE FINEST RADIO CONTROL MODELS
/