Samsung BD-J5500 取扱説明書

ブランド: Samsung

モデル: BD-J5500

カテゴリー: ブルーレイプレーヤー

タイプ: 取扱説明書

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray

™

Disc Player

user manual

BD-J5500

ENGLISH

Safety Information

Warning

•

The slots and openings in the cabinet

and in the back or bottom are

provided for necessary ventilation.

To ensure reliable operation of this

apparatus, and to protect it from

overheating, these slots and openings

must never be blocked or covered.

- Do not place this apparatus in

a confined space, such as a

bookcase, or built-in cabinet, unless

proper ventilation is provided.

- Do not place this apparatus

near or over a radiator or heat

to direct sunlight.

- Do not place vessels (vases

etc.) containing water on this

apparatus. A water spill can

cause a fire or electric shock.

•

Do not expose this apparatus to rain

or place it near water (near a bathtub,

washbowl, kitchen sink, or pool, etc.).

If this apparatus accidentally gets wet,

unplug it and contact an authorized

dealer immediately.

•This apparatus uses batteries. In

your community, there might be

environmental regulations that

require you to dispose of these

batteries properly. Please contact

your local authorities for disposal

or recycling information.

•Do not overload wall outlets,

extension cords or adaptors

beyond their capacity, since this

can result in fire or electric shock.

•

Route power-supply cords so that

they are not likely to be walked

on or pinched by items placed on

or against them. Pay particular

attention to cords at the plug end,

at wall outlets, and the point where

they exit from the apparatus.

•To protect this apparatus from a

lightning storm, or when it is left

unattended and unused for long

periods of time, unplug it from

the wall outlet and disconnect the

antenna or cable system. This will

prevent damage to the set due to

lightning and power line surges.

•

Before connecting the AC power

cord to the DC adaptor outlet,

make sure the voltage designation

of the DC adaptor corresponds to

the local electrical supply.

•Never insert anything metallic into

the open parts of this apparatus.

Doing so may create a danger of

electric shock.

•To avoid electric shock, never

touch the inside of this apparatus.

Only a qualified technician should

open this apparatus.

•Make sure to plug the power cord

in until it is firmly seated. When

unplugging the power cord from

a wall outlet, always pull on the

power cord’s plug. Never unplug

by pulling on the power cord. Do

not touch the power cord with

wet hands.

•

If this apparatus does not operate

normally - in particular, if there

are any unusual sounds or

smells coming from it - unplug

it immediately and contact an

authorized dealer or service center.

•Maintenance of Cabinet.

- Before connecting other

components to this product, be

sure to turn them off.

- If you move your product suddenly

from a cold place to a warm place,

condensation may occur on the

operating parts and lens and cause

abnormal disc playback. If this

occurs, unplug the product, wait for

two hours, and then connect the

plug to the power outlet. Then, insert

the disc, and try to play back again.

•

Be sure to pull the power plug out

of the outlet if the product is to

remain unused or if you are leaving

the house for an extended period

of time (especially when children,

elderly, or disabled people will be

left alone in the house).

- Accumulated dust can cause an

electric shock, an electric leakage,

or a fire by causing the power

cord to generate sparks and heat

or the insulation to deteriorate.

•

Contact an authorized service center

for information if you intend to install

your product in a location with heavy

dust, high or low temperatures, high

humidity, chemical substances, or

where it will operate 24 hours a day

such as in an airport, a train station,

etc. Failing to do so may lead to

serious damage of your product.

•Use only a properly grounded

plug and wall outlet.

- An improper ground may cause

electric shock or equipment

damage. (Class l Equipment only.)

This symbol indicates

that high voltage is pres-

ent inside. It is danger-

ous to make any kind of

contact with any internal

part of this product.

This symbol indicates

that important literature

concerning operation and

maintenance has been

included with this product.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

THE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS

INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

•

To turn this apparatus off

completely, you must disconnect it

from the wall outlet. Consequently,

the wall outlet and power plug must

be readily accessible at all times.

•Do not allow children to hang on

the product.

•Store the accessories (battery,

etc.) in a location safely out of the

reach of children.

•Do not install the product in an

unstable location such as a shaky

self, a slanted floor, or a location

exposed to vibration.

•

Do not drop or strike the product. If the

product is damaged, disconnect the

power cord and contact a service center.

•

To clean this apparatus, unplug the

power cord from the wall outlet and

wipe the product using a soft, dry

cloth. Do not use any chemicals such

as wax, benzene, alcohol, thinners,

insecticide, air fresheners, lubricants,

or detergent. These chemicals can

damage the appearance of the product

or erase the printing on the product.

•Do not expose this apparatus to

dripping or splashing. Do not put

objects filled with liquids, such as

vases on the apparatus.

•

Do not dispose of batteries in a fire.

•

Do not plug multiple electric

devices into the same wall socket.

Overloading a socket can cause it

to overheat, resulting in a fire.

•There is danger of an explosion if

you replace the batteries used in

the remote with the wrong type

of battery. Replace only with the

same or equivalent type.

•

WARNING - TO

PREVENT THE

SPREAD OF FIRE,

KEEP CANDLES AND

OTHER ITEMS WITH

OPEN FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

CLASS 1 LASER PRODUCT

This Compact Disc player is

classified as a CLASS 1 LASER

product. Use of controls,

adjustments or performance of

procedures other than those

specified herein may result in

hazardous radiation exposure.

CAUTION :

•

THIS PRODUCT USES AN

INVISIBLE LASER BEAM WHICH

CAN CAUSE HAZARDOUS

RADIATION EXPOSURE

IF DIRECTED. BE SURE

TO OPERATE PRODUCT

CORRECTLY AS INSTRUCTED.

•

THIS PRODUCT UTILIZES A

LASER. USE OF CONTROLS

OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN

HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN

COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO

QUALIFIED PERSONNEL.

This product satisfies CE regulations

when shielded cables and

connectors are used to connect the

unit to other equipment. To prevent

electromagnetic interference with

electric appliances, such as radios

and televisions, use shielded cables

and connectors for connections.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

✎

NOTES

If the Region number of a Blu-ray

Disc/DVDs does not correspond to

the Region number of this product,

the product cannot play the di

sc.

IMPORTANT NOTE

The mains lead on this equipment is

supplied with a molded plug incorporating

a fuse. The value of the fuse is indicated on

the pin face of the plug.

If it requires replacing, a fuse approved to

BS1362 of the same rating must be used.

Never use the plug with the fuse cover omitted

if the cover is detachable. If a replacement fuse

cover is required, it must be of the same colour

as the pin face of the plug. Replacement

covers are available from your dealer.

If the fitted plug is not suitable for the power

points in your house or the cable is not long

enough to reach a power point, you should

obtain a suitable safety approved extension

lead or consult your dealer for assistance.

However, if there is no alternative to cutting

off the plug, remove the fuse and then

safely dispose of the plug. Do not connect

the plug to a mains jack, as there is a risk of

shock hazard from the bared flexible cord.

To disconnect the apparatus from the

mains, the plug must be pulled out from the

mains socket, therefore the mains plug shall

be readily operable.

The product unit accompanying this user

manual is licenced under certain intellectual

property rights of certain third parties.

Precautions

Important Safety Instructions

Read these operating instructions

carefully before using the unit. Follow

all the safety instructions listed below.

Keep these operating instructions

handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near

water.

Clean only with a dry cloth.

Do not block any ventilation

openings. Install in accordance

with the manufacturer's

instructions.

Do not install near any heat

sources such as radiators,

heat registers, stoves, or other

apparatus (including AV receivers)

that produce heat.

o not defeat the safety purpose

of the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the

third prong are provided for your

safety. If the provided plug does

not fit into your outlet, consult an

electrician for replacement of the

obsolete outlet.

10.

Protect the power cord from

being walked on or pinched

particularly at plugs, convenience

receptacles, and the point where

it exits the apparatus.

11.

Only use attachments/

accessories specified by the

manufacturer.

12.

Use only

with the cart,

stand, tripod,

bracket, or table

specified by the

manufacturer,

or sold with the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from

tip-over.

13.

Unplug this apparatus during

lightning storms or when unused

for long periods of time.

14.

Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as when the power-supply cord or

plug is damaged, liquid has been

spilled or objects have fallen into

the apparatus, the apparatus has

been exposed to rain or moisture,

does not operate normally, or has

been dropped.

Using the 3D function

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES.

Read and understand the following

safety information before using the

3D function.

•

Some viewers may experience

discomfort while viewing 3D TV

such as dizziness, nausea, and

headaches.

If you experience any such symptom,

stop viewing 3D TV, remove the 3D

Active Glasses, and rest.

•

Watching 3D images for an

extended period of time may cause

eye strain. If you feel eye strain,

stop viewing 3D TV, remove your

3D Active Glasses, and rest.

•

A responsible adult should

frequently check on children who

are using the 3D function.

If there are any reports of tired eyes,

headaches, dizziness, or nausea,

have the child stop viewing 3D TV

and rest.

•

Do not use the 3D Active Glasses

for other purposes (Such as general

eyeglasses, sunglasses, protective

goggles, etc.).

•

Do not use the 3D function or

3D Active Glasses while walking

or moving around. Using the 3D

function or 3D Active Glasses while

moving around may cause you to

bump into objects, trip, and/or fall,

and cause serious injury.

•

If you want to enjoy 3D content,

connect a 3D device (3D compliant

AV receiver or TV) to the player's

HDMI OUT port using a high-speed

HDMI cable. Put on 3D glasses

before playing the 3D content.

•

The player outputs 3D signals only

through HDMI cable connected to

the HDMI OUT port.

•

As the video resolution in 3D play

mode is fixed according to the

resolution of the original 3D video,

you can not change the resolution

to your preference.

•

Some functions such as BD Wise,

screen size adjustment, and

resolution adjustment may not

operate properly in 3D play mode.

•

You must use a high-speed HDMI

cable for proper output of the 3D

signal.

•

Stay at least three times the width

of the screen from the TV when

watching 3D images. For example,

if you have a 46-inch screen, stay

138 inches (11.5 feet) from the

screen.

•

Place the 3D video screen at eye

level for the best 3D picture.

•

When the player is connected to

some 3D devices, the 3D effect

may not function properly.

•

This player does not convert 2D

content into 3D.

•

"Blu-ray 3D" and "Blu-ray 3D" logo

are trademarks of the Blu-ray Disc

Association.

Getting Started

Before using the User Manual

Disc Types and Contents your player can play

Media Disc Type Details

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-

R/+R that have been recorded and finalized, or a USB

storage media containing DivX, MKV or MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R

or a USB storage media containing MP3 or WMA

contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-

RE/-R or a USB storage media containing JPEG

contents.

✎

NOTES

The player may not play certain CD-RW/-R and DVD-R because of the disc type or

recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be

playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate

that exceeds 10 Mbps.

Your player will not play content that has been recorded on a BD-R or USB device

at a bit rate that exceeds 25 Mbps.

Playback may not work for some types of discs, or when you use specific

functions, such as angle change and aspect ratio adjustment. Information about

the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some

functions may perform slowly.

SAFETY INFORMATION

Warning ....................................... 2

Precautions ................................. 4

Using the 3D function .................. 4

GETTING STARTED

Before using the User Manual ...... 5

Logos of Discs the

player can play ............................ 6

Accessories ................................. 8

Front Panel .................................. 8

Rear Panel ................................... 8

Remote Control ........................... 9

CONNECTIONS

Connecting to a TV ...................... 9

Connecting to an Audio

System ...................................... 10

Connecting to a Network

Router

....................................... 10

SETTINGS

The Setup Procedure ................. 11

Menu Navigation ........................ 11

Accessing the Settings Menu .... 11

Picture Settings ......................... 11

Sound Settings .......................... 12

Network Settings ....................... 14

System Settings ........................ 15

Language Settings ..................... 15

Security Settings ....................... 16

General Settings ........................ 16

Support Settings ....................... 16

MEDIA PLAY

Playing a Commercially

Recorded Disc ........................... 17

Playing Files on a USB Device ... 17

Playing a Disc with User

Recorded Content ..................... 18

Using DLNA ............................... 18

Controlling Video Playback ........ 18

Controlling Music Playback ........ 19

Playing Photo Contents ............. 20

APPENDIX

Troubleshooting ......................... 21

Specifications ............................ 22

Contents

Disc Type

Region

Code

Area

DVD-

VIDEO

Russia, Eastern Europe, India, North Korea, Mongolia

China

Logos of Discs the player can play

Blu-ray Disc BD-LIVE 3D Blu-ray Disc DivX

PAL broadcast System in

U.K., France, Germany, etc.

Supported File Formats

Notes on the USB connection

•

Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.

•

The player does not support folder or file names longer than 128 characters.

•

Some USB/External HDD/digital camera devices may not be compatible with the player.

•

Your player supports the FAT16, FAT32, and NTFS file systems.

•

Connect USB devices directly to the player’s USB port. Connecting through a USB cable

may cause compatibility problems.

•

Inserting more than one memory device into a multi-card reader may cause the reader to

operate improperly.

•

The player does not support the PTP protocol.

•

Do not disconnect a USB device during a "loading" process.

•

The bigger the image resolution, the longer the image takes to display.

•

This player cannot play MP3 files with DRM (Digital Rights Management) downloaded

from commercial sites.

•

Your player only supports video with a frame rate under 30fps (frames per second).

•

Your player only supports USB Mass Storage Class (MSC) devices such as thumb

drives and USB HDD. (HUB is not supported.)

Disc types your player cannot play

•

HD DVD

•

DVD-ROM/PD/

MV, etc

•

DVD-RAM

•

Super Audio CD

(except CD layer)

•

DVD-RW (VR

mode)

•

CVD/CD-ROM/CDV/

CD-G/CD-I/LD(CD-

Gs play audio only,

not graphics.)

•

3.9 GB DVD-R for

Authoring.

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc to play. If the codes do not match, the

disc will not play.

The Region Number for this player is displayed on the rear panel of the player.

Disc Type

Region

Code

Area

Blu-ray

Disc

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and South Asia.

DVD-

VIDEO

The U.S., U.S. territories and Canada

Europe, Japan, the Middle East, Egypt, Africa, Greenland

Taiwan, Korea, the Philippines, Indonesia, Hong Kong

Mexico, South America, Central America, Australia, New

Zealand, Pacific Islands, Caribbean

•

Certain USB HDD Devices, multi-card readers and thumb drives may not be

compatible with this player.

•

If some USB devices require excessive power, they may be limited by the circuit

safety device.

•

If playback from a USB HDD is unstable, provide additional power by plugging the

HDD into a wall socket.

If the problem continues, contact the USB HDD manufacturer.

•

SAMSUNG is not responsible for any data file damage or data loss.

•

Your player does not support NTFS compressed files, sparse files, or encrypted files.

•

You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)

Video File Support

File

Extension

Container Video Codec

Audio

Codec

Resolution

*.avi

AVI

DivX 3.11/4/5/6

MP3

Dolby Digital

DTS

WMA

PCM

1920x1080

MP4v3

H.264 BP/MP/HP

1920x1080

*.mkv

MKV

VC-1 AP MP3

Dolby Digital

DTS

1920x1080

H.264 BP/MP/HP

1920x1080

*.wmv

WMV (wmv9)

VC-1 AP

WMA

1920x1080

VC-1 SM

1920x1080

*.mp4

MP4

MP4 (mp4v)

AAC

1920x1080

H.264 BP/MP/HP

1920x1080

*.mpg

*.mpeg

MPEG1

MP1, 2

Dolby Digital

DTS

1920x1080

MPEG2

1920x1080

H.264 BP/MP/HP

1920x1080

*.rmvb

RMVB

RV8/9/10

RV30/40

RealAudio 6

1920x1080

• Limitations

- Even when a file is encoded by a supported codec listed above, the file might

not be played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong

or the file itself is corrupted.

- Files having a higher Bit rate/frame rate than standard may stutter during

sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

- Depending on your country, RMVB format may not be supported.

• Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

• Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)

Max bit rate: 320kbps



Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

✎

NOTES

Playback of some DivX, MKV or MP4 file may not be supported depending on their

video resolution and frame rate.

Music File Support

File

Extension

Container

Audio

Codec

Support Range

*.mp3

MP3 MP3

*.wma

WMA WMA

* Sampling rates (in kHz) - 8, 11, 16, 22,

32, 44.1, 48

* Bit rates - All bit-rates from 5kbps to 355kbps

Picture File Support

File Extension Type Resolution

*.jpg

*.jpeg

*.jpe

JPEG

15360x8640

*.png

PNG

15360x8640

AVCHD (Advanced Video Codec High Definition)

•This player can play back AVCHD format discs. These discs are

normally recorded and used in camcorders.

•The AVCHD format is a high definition digital video camera format.

•The MPEG-4 AVC/H.264 format compresses images with greater

efficiency than the conventional image compressing format.

•Some AVCHD discs use the "x.v.Color" format. This player can play

back AVCHD discs that use "x.v.Color" format.

•"x.v.Color" is a trademark of Sony Corporation.

•"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic

Industrial Co., Ltd. and Sony Corporation.

✎

NOTES

Some AVCHD format discs may not play, depending on the recording condition.

AVCHD format discs need to be finalized.

"x.v.Color" offers a wider colour range than normal DVD camcorder discs.

Accessories

Check for the supplied accessories shown below.

HDMI Cable

Batteries for Remote

Control (AAA Size)

User Manual Remote Control

Front Panel

DISC TRAY

POWER BUTTON

OPEN/CLOSE BUTTON

USB HOST

REMOTE CONTROL SENSOR

✎

NOTES

You can perform software upgrades using the USB Host jack with a USB flash memory stick only.

Please open and pull out the cover USB before inserting USB device.

Rear Panel

HDMI OUT LAN DIGITAL AUDIO OUT

Remote Control

Tour of the Remote Control

Turn the player on and off.

Allows you to repeat A-B disc.

Press numeric buttons to operate options.

Press to open and close the disc tray.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to stop a disc.

Press to use bonusview function.

Return to the previous menu.

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

Use to select menu items and change menu

values.

Press to use Tools menu.

Use to access various audio functions on a

disc (Blu-ray Disc/DVD).

Press to play a disc.

Press to pause a disc.

Turn the TV on and off.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Use to enter the popup menu/title menu.

Press to search a disc backwards or

forwards.

Press to move to the home menu.

Press to see the full screen on a TV.

During Blu-ray or DVD disc playback, the

Full screen button does not operate.

Press to exit the menu.

Use to display the playback information.

Allows you to repeat a title, chapter, track or

disc.

TV volume adjustment.

After setup, allows you to set the input

source on your TV.

Installing batteries

✎

NOTES

If the remote does not operate properly:

•

Check the polarity (+/–) of the batteries.

•

Check if the batteries are drained.

•

Check if the remote sensor is blocked by obstacles.

•

Check if there is any fluorescent lighting nearby.

CAUTION

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash

Do not dispose of batteries in a fire.

Do not short circuit, disassemble or overheat the batteries.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Connections

Connecting to a TV

Connect an HDMI cable from the HDMI OUT jack on the back of the

product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made

all the other connections.

- When you change the connections, turn off all devices before you start.

Audio

Video

✎

NOTES

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the

Digital Audio Out on the player to an audio system to hear audio.

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user

manual of your TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on

for the first time, the player automatically sets the HDMI output resolution to the highest supported

by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise

appears on the screen.

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using one of the

methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made

all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI compatible AV receiver.

•Connect an HDMI cable from the HDMI OUT jack on the back of the

product to the HDMI IN jack on your receiver.

•Best quality (Recommended)

Method 2 Connecting to an AV receiver with a Digital Coaxial Cable

•

Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio

Out jack on the product to the Digital Coaxial In jack of the receiver.

•Good quality

•You will hear sound only through the front two speakers with Digital

Output set to PCM.

AudioAudio

Method 2Method 1

Connecting to a Network Router

You can connect your player to your network router using one of the

methods illustrated below.

To use the DLNA network functionality, you must connect your PC to your

network as shown in the illustrations.

Wired Network

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Broadband modem

Router

✎

NOTES

Internet access to Samsung's software update server may not be allowed, depending on

the router you use or your ISP's policy. For more information, contact your ISP (Internet

Service Provider).

DSL users, please use a router to make a network connection.

Settings

The Setup Procedure

•

The Home screen will not appear if you do not

configure the setup.

•

The OSD (On Screen Display) may change in this

player after you upgrade the software version.

•

The access steps may differ depending on the

menu you selected.

•

After the setup process is complete, the panel

buttons and remote control can be operated.

After you have connected the player to your

TV, turn on the TV and player. When you

turn on the player the first time, the player's

Setup screen appears on the TV. The Setup

procedure lets you set the On Screen Display

(OSD) and menu languages, the aspect ratio

(screen size), the network type, and connect

the player to your network.

✎

NOTES

The Home menu will not appear if you do not

configure the setup except as noted below.

If you press the BLUE (D) button during

network setup, you can access the Home menu

even if the network setup is not completed yet.

When you return to the Home menu, the full

screen mode is cancelled automatically.

If you want to display the Setup screen again to

make changes, press the

button on the front

panel of the player for more than 5 seconds with

no disc inserted.

This resets the player to its

default settings.

After the setup process is complete. you can

operate the HDMI-CEC function.

If you want to use the Anynet+(HDMI-CEC)

function to aid in the initial set up process,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Setup Settings Procedure.

If you leave the player in the stop mode for

more than 5 minutes without using it, a screen

saver will appear on your TV. If the player is

left in the screen saver mode for more than 25

minutes, the power will automatically turn off.

Menu Navigation

HOME Button : Press to move to

the Home menu.

Button : Return to the previous menu.

(Enter) / DIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

退出

Button : Press to exit the

current menu.

•Home Menu

App 1 App 2

Change Device

Settings

PLAY DISC PHOTOS VIDEOS MUSIC

No Disc

Selects VIDEOS.

Selects MUSIC.

Selects Settings.

Selects Change Device.

Selects PHOTOS.

Selects PLAY DISC.

Selects applications.

✎

NOTES

The Videos, Photos, and Music options

require that you have an appropriate disc

inserted into the player or a USB flash

device attached to the player.

Accessing the Settings Menu

To access the Settings menu and

sub-menus, follow these steps:

Press the POWER button.

The Home Menu appears.

Press the ▲▼◄► buttons to

select Settings, and then press

the

button.

Press the ▲▼ buttons to select

the desired submenu, and then

press the

button.

Press the ▲▼ buttons to select

the desired item, and then

press the

button.

Press the

退出

button to exit the

menu.

✎

NOTES

The access steps may differ depending

on the menu you selected. The OSD (On

Screen Display) may change in this player

after you upgrade the software version.

Picture Settings

You can configure various display options

such as the TV Aspect Ratio, Resolution, etc.

3D Settings

Select whether to play a Blu-ray

Disc with 3D contents in 3D Mode.

✎

NOTES

For some 3D discs, to stop a movie during

3D playback, press the

button once.

The movie stops and the 3D mode option is

de-activated.

To change a 3D option selection when

you are playing a 3D movie, press the

button once.

The Blu-ray menu appears. Press the

button again, then select 3D Settings in the

Blu-ray menu.

Depending on the content and the position

of the picture on your TV screen, you may

see vertical black bars on the left side, right

side, or both sides.

TV Aspect Ratio

Depending on the type of television you have,

you may want to adjust the screen size setting.

✎

NOTES

Depending on the disc type, some aspect ratios

may not be available.

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

the picture might appear to be distorted.

BD Wise (Samsung TVs only)

BD Wise is Samsung’s latest inter-

connectivity feature.

When you connect a Samsung player

and a Samsung TV with BD Wise to each

other via HDMI, and BD Wise is on in

both the player and TV, the player outputs

video at the video resolution and frame

rate of the Blu-ray Disc/DVDs.

✎

NOTES

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise

appears in the Resolution menu.

If the player is connected to a device that does

not support BD Wise, you cannot use the BD

Wise function.

For proper operation of BD Wise, set the BD

Wise menu of both the player and the TV to On.

Resolution

Lets you set the output resolution of

the HDMI video signal to Auto, 1080p,

1080i, 720p or 576p/480p. The number

indicates the number of lines of video per

frame. The i and p indicate interlaced and

progressive scan, respectively. The more

lines, the higher the quality.

Resolution according to the

output mode

•Blu-ray Disc/E-contents/Digital

Contents playback

Output

Setup

HDMI / connected

HDMI Mode

Blu-ray

Disc

E-contents/

Digital

contents

BD Wise

Resolution of

Blu-ray Disc

1080p

Auto

Max. Resolution

of TV input

Max. Resolution

of TV input

1080p@60F

(Movie Frame :

Off)

1080p@60F 1080p@60F

Movie Frame :

Auto (24 fps)

1080p@24F 1080p@24F

1080i 1080i 1080i

720p 720p 720p

576p/480p 576p/480p 576p/480p

•DVD playback

Output

Setup

HDMI / connected

HDMI Mode

BD Wise 576i/480i

Auto Max. Resolution of TV input

1080p 1080p

1080i 1080i

720p 720p

576p/480p 576p/480p

✎

NOTES

If the TV you connected to the player

does not support Movie Frame or

the resolution you selected, the

message "If no pictures are shown

after selecting ‘Yes’, please wait for

15 seconds to return to the previous

resolution. " appears. If you select

Yes, the TV’s screen will go blank for

15 seconds, and then the resolution

will revert to the previous resolution

automatically.

If the screen stays blank after you

have changed the resolution, remove

all discs, and then press and hold the

button on the front of the player

for more than 5 seconds. All settings

are restored to the factory default.

Follow the steps on the previous page

to access each mode and select the

Display Setup that your TV will support.

When the factory default settings are

restored, all stored user BD data is deleted.

The Blu-ray Disc must have the 24

frame feature for the player to use the

Movie Frame (24 fps) mode.

Movie Frame (24 fps)

Setting the Movie Frame (24 fps)

feature to Auto allows you to adjust

the player’s HDMI output to 24

frames per second for improved

picture quality.

You can enjoy the Movie Frame

(24 fps) feature only on a TV

supporting this frame rate. You can

select Movie Frame On when the

player is in the HDMI 1080p output

resolution modes.

HDMI Colour Format

Lets you set the colour space

format for HDMI output to match

the capabilities of the connected

device (TV, monitor, etc).

HDMI Deep Colour

Lets you output video from the

HDMI

OUT jack with Deep

Colour

Deep

Colour

provides more

accurate colour reproduction with

greater colour depth.

Progressive Mode

Lets you improve picture quality

when viewing DVDs.

Sound Settings

Digital Output

Lets you select the digital audio

output format that is suitable for

your TV or AV Receiver. For more

details, please refer to the Digital

Output Selection table.

Digital Output Selection

Setup PCM

Bitstream

(Unprocessed)

Bitstream

(Re-encoded

DTS)

Bitstream

(Re-encoded

Dolby D)

Connection

HDMI

Receiver

Coaxial

HDMI

Receiver

Coaxial

HDMI Receiver

or Coaxial

HDMI supported

AV receiver or

Coaxial

Audio

Stream on

Blu-ray Disc

PCM

Up to

7.1ch

PCM 2ch PCM PCM 2ch Re-encoded DTS

Re-encoded

Dolby Digital *

Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS

Re-encoded

Dolby Digital *

Dolby Digital

Plus

PCM 2ch PCM 2ch

Dolby Digital

Plus

Dolby Digital Re-encoded DTS

Re-encoded

Dolby Digital *

Dolby TrueHD PCM 2ch PCM 2ch

Dolby

TrueHD

Dolby Digital Re-encoded DTS

Re-encoded

Dolby Digital *

DTS PCM 2ch PCM 2ch DTS DTS Re-encoded DTS

Re-encoded

Dolby Digital *

DTS-HD High

Resolution

Audio

PCM 2ch PCM 2ch

DTS-

HD High

Resolution

Audio

DTS Re-encoded DTS

Re-encoded

Dolby Digital *

DTS-HD Master

Audio

PCM 2ch PCM 2ch

DTS-HD

Master

Audio

DTS Re-encoded DTS

Re-encoded

Dolby Digital *

Audio

Stream on

DVD

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital

DTS PCM 2ch PCM 2ch DTS DTS DTS DTS

Definition

for Blu-ray

Disc

Any

Decodes main feature

audio and BONUSVIEW

audio stream together

into PCM audio and

add Navigation Sound

Effects.

Outputs only main feature

audio stream so that your

AV receiver can decode

the audio bitstream.

You will not hear

BONUSVIEW audio and

Navigation Sound Effects.

Decodes main

feature audio

and BONUSVIEW

audio stream

together into

PCM audio and

add Navigation

Sound Effects,

then re-encodes

the PCM

audio into DTS

bitstream

Decodes main

feature audio

and BONUSVIEW

audio stream

together into

PCM audio and

add Navigation

Sound Effects,

then re-encodes

the PCM audio

into Dolby Digital

bitstream

* If Source Stream is 2ch, "Re-encoded

Dolby D" Settings are not applied.

Blu-ray Discs may include three audio streams :

- Main Feature Audio : The audio

soundtrack of the main feature.

- BONUSVIEW audio : An additional

soundtrack such as the director or

actor’s commentary.

- Navigation Sound Effects : When you

choose a menu navigation selection, a

Navigation Sound Effect may sound.

Navigation Sound Effects are different

on each Blu-ray Disc.

✎

NOTES

Be sure to select the correct Digital Output

or you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as

PCM.

Regular DVDs do not have BONUSVIEW

audio and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the

audio signal outputs as PCM regardless

of your Digital Output selections (PCM or

Bitstream).

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS),

the player may output PCM 2ch downmixed

audio even though you selected Bitstream

(either Re-encoded or Unprocessed) in the

setup menu.

If your TV is not compatible with PCM

sampling rates over 48kHz, the player may

output 48kHz downsampled PCM audio even

though you set PCM Downsampling to Off.

PCM Downsampling

Lets you choose to have 96KHz PCM

signals downsampled to 48KHz before

they are outputted to an amplifier. Choose

On if your amplifier or receiver is not

compatible with a 96KHz signal.

Dynamic Range Control

Lets you apply dynamic range control to

Dolby Digital, Dolby Digital Plus, and Dolby

True HD audio.

•

Auto : Automatically controls the

dynamic range of Dolby TrueHD audio,

based on information in the Dolby

TrueHD soundtrack.

Also turns dynamic range control on for

Dolby Digital and Dolby Digital Plus.

•

Off : Leaves the dynamic range

uncompressed, letting you hear the

original sound.

•

On : Turns dynamic range control on for

all three Dolby formats. Quieter sounds

are made louder and the volume of loud

sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix

method that is compatible with your

stereo system. You can choose to have

the player downmix to normal stereo or to

surround compatible stereo.

Network Settings

Please contact your ISP to find

out if your IP address is static or

dynamic. If it is dynamic - and most

are - we recommend using the Auto

procedure for network setup. This is

easiest and will work in the majority

of cases. If it is static, you must

use the manual set up procedure.

Network setup directions start below.

✎

NOTES

This unit can only be connected to a

Network via a wired connection.

Wired Network Settings

In the Home menu, press the ▲▼

◄► buttons to select Settings,

and then press the

button.

Press the ▲▼ buttons to select

Network, and then press the

button.

Press the ▲▼ buttons to select

Wired Network Settings, and

then press the

button. The

Wired Network Settings screen

appears.

Picture

Sound

Network

System

Language

Security

General

Support

Settings

Wired Network Settings

Internet Protocol Setup : Auto

IP Address :

Subnet Mask :

Gateway :

DNS : Auto

DNS Server :

Move

Select

Return

In the Internet Protocol Setup

field, select Auto if it is not

selected. (Press

select Auto,

and then press

The Auto Function acquires and

fills in the values for IP Address,

Subnet Mask, etc., automatically.

✎

NOTES

This process can take up to five

minutes.

After the Network Function has

acquired the network values,

press the RETURN button.

Select Network Test, and then

press

to ensure the player

has connected to your network.

When the Network Test is

complete, press the RETURN

twice to return to the Main Menu.

If the Network Function does not

acquire the network values, go to

the directions for Manual Setup.

Manual Network Setup

Before you start manual network

setup, you need the network setting

values.

To enter the Network Settings

into your player, follow these

steps:

In the Home menu, press the ▲▼

◄► buttons to select Settings,

and then press the

button.

Press the ▲▼ buttons to select

Network, and then press the

button.

Press the ▲▼ buttons to select

Wired Network Settings, and then

press the

button. The Wired

Network Settings screen appears.

Select the Internet Protocol Setup

field, and then press the

button.

Press the ▲▼ buttons to select

Manual, and then press the

button.

Press the ▼ button to go to the first

entry field (IP Address).

Use the number buttons on your

remote to enter numbers.

When done with each field, use the

► button to move to the next field.

You can also use the other arrow

buttons to move up, down, and

back.

Enter the IP Address, Subnet

Mask, and Gateway values in the

same way.

10.

Press the ▼ button to go to DNS.

11.

Press the ▼ button to go to the first

DNS entry field.

12.

Enter the numbers as above.

13.

Press the RETURN button on your

remote.

14.

Run a Network Test to ensure

the player has connected to your

network.

Network Test

Use this menu item to check whether your

network connection is working or not.

Network Status

Use to check whether a connection

to a network and the Internet has

been established.

Device Name

Device Name function allows you to

change player's name by selecting

from device name list box.

BD-Live Internet Connection

Set to allow or prohibit an Internet connection

when you use the BD-LIVE service.

•

Allow (All) : The Internet connection is

allowed for all BD-LIVE contents.

•

Allow (Valid Only) : The Internet

connection is allowed only for BD-LIVE

contents containing a valid certificate.

•

Prohibit : No Internet connection is

allowed for any BD-LIVE content.

✎

NOTES

What is a valid certificate?

When the player uses BD-LIVE to

send the disc data and a request

to the server to certify the disc, the

server uses the transmitted data to

check if the disc is valid and sends the

certificate back to the player.

The Internet connection may be

restricted while you are using BD-LIVE

contents.

Using BD-LIVE™

Once the player is connected to

the network, you can enjoy various

movie-related service contents

using a BD-LIVE compliant disc.

Attach a USB memory stick to

the USB jack on the front of

the player, and then check its

remaining memory. The memory

device must have at least 1GB

of free space to accommodate

the BD-LIVE services.

Insert a Blu-ray Disc that

supports BD-LIVE.

Select an item from various BD-

LIVE service contents provideßd

by the disc manufacturer.

✎

NOTES

The way you use BD-LIVE and

the provided contents may differ,

depending on the disc manufacturer.

The DLNA Function

DLNA lets you play music, video, and

photo files located in your PC on the

player.

To use DLNA with your player, you must

connect the player to your network.

(See page 14-15).

To use DLNA with your PC, you must

install DLNA software on your PC.

System Settings

Setup

By using the Setup function, you

can set the language, Network

Settings, etc.

For more information about the

Setup function, refer to the Setup

section of this user manual (See

page 11).

Quick Start

You can turn on the power quickly

by decreasing the boot time.

✎

NOTES

If this function is set to On, Standby

power consumption will be increased.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function

that offers linked operations with

other Samsung players that have the

Anynet+ feature.

To operate this function, connect this

player to an Anynet+ Samsung TV

with an HDMI cable.

With Anynet+ on, you can operate

this player using a Samsung TV

remote control and start disc

playback simply by pressing the

PLAY (

) button on the TV’s

remote control.

For more information, please see the

TV user manual.

✎

NOTES

This function is not available if the HDMI

cable does not support CEC.

If your Samsung TV has an Anynet+ logo,

then it supports the Anynet+ function.

Depending on your TV, certain HDMI

output resolutions may not work.

Please refer to the user manual of your TV.

After the product was turned off,

disconnecting and connecting the power

cable turns it on automatically. At the moment,

it automatically turns off in about 15 seconds

for re-establishing Anynet+ connection.

For some TV products, if connected to this

`product with Anynet+ function, turning

the TV on may display a warning popup

message saying no connection was found.

Still, Anynet+ connection is properly

established and available to use.

BD Data Management

Enables you to manage the downloaded

contents you accessed through a Blu-ray

disc that supports the BD-LIVE service

and stored on a flash drive.

You can check the device’s information

including the storage size, delete the BD

data, or change the Flash memory device.

✎

NOTES

In the external memory mode, disc

playback may be stopped if you disconnect

the USB device in the middle of playback.

Your player supports the FAT16, FAT32, and

NTFS file systems. We recommend you use

USB devices that support USB 2.0 protocol

with 4 MB/sec or faster read/write speed.

The Resume Play function may not work

after you format the storage device.

The total memory available to BD Data

Management may differ, depending on the

conditions.

DivX® Video On Demand

View DivX® VOD Registration Codes to

purchase and play DivX® VOD contents.

Language Settings

You can select the language you prefer for the On-

Screen menu, disc menu, audio, and subtitles.

✎

NOTES

The selected language will only

appear if it is supported on the disc.

Security Settings

The default security PIN is 0000. Enter the

default PIN to access the security function

if you haven't created your own PIN. After

you have accessed the security function

for the first time, change the PIN using the

Change PIN function.

BD Parental Rating

Prevents playback of Blu-ray Discs

with specific age ratings unless the 4

digit PIN is entered.

DVD Parental Rating

This function works in conjunction with

DVDs that have been assigned an age

rating or numeric rating that indicates

the maturity level of the content. These

numbers help you control the types of

DVDs that your family can watch.

Select the rating level you want to set. For

example, if you select Level 6, discs rated

above 6 - Level 7 and 8 - will not play.

A larger number indicates more mature

content.

Change PIN

Change the 4-digit password used to

access security functions.

If you forget your password

Remove any discs.

Press and hold the

button on the

front panel for 5 seconds or more.

All settings will revert to the factory

settings.

✎

NOTES

When the factory default settings are restored,

all the user stored BD data will be deleted.

General Settings

Time Zone

Lets you specify the time zone that

is applicable to your area.

Support Settings

Software Upgrade

The Software Upgrade menu allows you to

upgrade the player’s software for performance

improvements or additional services.

By Online

To upgrade By Online, follow these steps:

In the player’s menu, go to Settings

> Support > Software Upgrade.

Select By Online, and then press

the

button. The Connecting to

Server message appears.

A popup message will appear if an

update is available.

If you select Yes, the player will turn

off automatically before restarting.

(Never turn the player on or off

manually during an upgrade.)

When the update is completed, the

player will turn off automatically.

✎

NOTES

The upgrade is complete when the player

turns off, and then turns on again by itself.

Never turn the player off or back on

manually during the update process.

Samsung Electronics takes no legal

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during a software upgrade.

No disc should be in the product when you

upgrade the software By Online.

By USB

To upgrade by USB, follow these steps:

Visit www.samsung.com/

bluraysupport.

Download the latest USB

software upgrade zip archive to

your computer.

Unzip the zip archive to your

computer. You should have a

single RUF file with the same

name as the zip file.

Copy the RUF file to a USB

flash drive.

Make sure there is no disc in

the player, and then insert the

USB flash drive into the USB

port of the player.

In the player’s menu, go

to Settings > Support >

Software Upgrade.

Select By USB.

✎

NOTES

No disc should be in the product when

you upgrade the software using the USB

Host jack.

When the software upgrade is done,

check the software details in the

software Upgrade menu.

Do not turn off the player during the

software upgrade. It may cause the

player to malfunction.

Software upgrades using the USB Host

jack must be performed with a USB flash

memory stick only.

Auto Upgrade Notification

If you have connected the player to your

network, and then set Auto Upgrade

Notification on, the player automatically

notifies you when a new software

version is available for the player.

To set Auto Upgrade Notification

on, follow these steps:

Select Auto Upgrade Notification,

and then press the

button.

Use the ▲▼ buttons to select On,

and then press the

button.

If there is a new software version

available, the player notifies you

with a popup message.

To upgrade the firmware,

select Yes in the Pop-up. The

player turns off automatically,

then restarts, and begins the

download. (Never turn the

player on or off manually during

an upgrade.)

The update progress popup

appears.

When the update is completed,

the player will turn off

automatically.

✎

NOTES

The upgrade is complete when the

player turns off, and then turns on

again by itself.

Never turn the player off or on

manually during the update process.

Samsung Electronics takes no legal

responsibility for player malfunction

caused by an unstable Internet

connection or consumer negligence

during software upgrade.

Contact Samsung

Provides contact information for

assistance with your player.

Lets you view the general disclaimer

regarding third party contents and

services.

Reset

Returns all settings to their factory

defaults except for the network

settings.

Media Play

Playing a Commercially

Recorded Disc

Press the

button to open the

disc tray.

Place a disc gently into the disc tray

with the disc's label facing up.

Press the

button to close

the disc tray. Playback starts

automatically.

Playing Files on a USB Device

There are two methods you can use to

play or view multimedia files located on

a USB device through your player.

Method 1

Turn the player on.

Connect the USB device to the USB

port on the front panel of the player. The

New Device Connected pop-up

appears.

App 1 App 2

Change Device

Settings

PLAY DISC PHOTOS VIDEOS MUSIC

No Disc

New device connected.

Photos

Videos

Music

123

Move

Enter

Return

✎

NOTES

If the pop-up does not appear, go to

Method 2.

Use the ▲▼ buttons to select Photos,

Videos, or Music, and then press the

button. The Photos, Videos & Music

screen appears listing the content of the

device. Depending on how the contents

is arranged, you will see either folders,

individual files, or both.

✎

NOTES

Even though the player will display folders

for all content types, it will only display files

of the Content Type you selected in Step

3. For example, if you selected music, you

will only be able to see music files. You can

change this selection by returning to the

Photos, Videos & Music screen and going

to Step 3 in Method 2 below.

If necessary, use the ▲▼◄►

buttons to select a folder, and then

press the

button.

Select a file to view or play, and then

press the

button.

Press the

button to exit a folder

or the

退出

button to return to the

Home screen.

Go to pages 18~20 for instructions that

explain how to control playback of videos,

music, and pictures on a USB device.

Method 2

Turn the player on.

Connect the USB device to the

USB port on the front panel of the

player. Select Change Device and

then press the ▲▼ button to select

USB. Press the

button.

App 1 App 2

Change Device

Settings

PLAY DISC PHOTOS VIDEOS MUSIC

No Disc

Change Device

No Disc

123

Use the ▲▼◄► buttons to select

PHOTOS, VIDEOS, or MUSIC on the

Home screen and then press the

button. The Photos, Videos & Music

screen appears listing the content of

the device. Depending on how the

contents is arranged, you will see

either folders, individual files, or both.

✎

NOTES

Even though the player will display folders

for all content types, it will only display

files of the Content Type you selected

in Step 3. For example, if you selected

music, you will only be able to see music

files. You can change this selection by

returning to the Photos, Videos & Music

screen and repeating Step 3.

If necessary, use the ▲▼◄►

buttons to select a folder, and then

press the

button.

Use the ▲▼◄► buttons to select

a file to view or play, and then press

the

button.

Press the

button to exit a folder

or the

退出

button to return to Home

screen.

Go to pages 18~20 for instructions

that explain how to control playback

of videos, music, and pictures on a

USB device.

✎

NOTES

If you insert a disc when playing

a USB device, the device mode

changes to "Disc" automatically.

Playing a Disc with User

Recorded Content

You can play multimedia files you have

recorded on Blu-ray, DVD, or CD discs.

Place a user recorded disc into

the disc tray with the disc’s

label facing up, and then close

the tray.

Use the ◄► buttons to select the

type of content you want to view or

play - VIDEOS, PHOTOS, or MUSIC

- and then press the

button.

✎

NOTES

Even though the player will display

folders for all content types, it will only

display files of the Content Type you

selected in Step 2. For example, if you

selected music, you will only be able

to see music files. You can change

this selection by returning to the Home

screen and repeating Step 2.

A screen appears listing the contents

of the disc. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

If necessary, use the ▲▼◄►buttons

to select a folder, and then press the

button.

Use the ◄►▲▼ buttons to select

a file to view or play, and then

press the

button.

Press the

button one or more

times to exit a current screen, exit

a folder, or to return to the Home

screen. Press the

退出

button to

return directly to the Home Screen.

Go to pages 18~20 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

Using DLNA

DLNA Connection

Blu-ray Disc Player

Play back PC's

files

Connect the Blu-ray Disc Player,

your PC, and/or your DLNA

compatible device to the same

wireless network.

Follow the directions in the DLNA

software Installation/Instruction

manual to set up devices and files for

playing or viewing.

Select Change Device on the

player's Home screen, and then

press the

button. In the list

of DLNA connected devices that

appears, select your PC or other

DLNA compatible device, and then

press the

button.

Use the ◄► buttons to select the

type of content you want to view or

play - VIDEOS, PHOTOS, or MUSIC

- and then press the

button.

✎

NOTES

Even though the player will display folders

for all content types, it will only display files

of the Content Type you selected in Step

4. For example, if you selected music, you

will only be able to see music files. You can

change this selection by returning to the

Home screen and repeating Step 4.

A screen appears listing the contents

of the PC or DLNA device. Depending

on how the contents are arranged,

you will see either folders, individual

files, or both.

If necessary, use the ▲▼◄►buttons

to select a folder, and then press the

button.

Use the ◄►▲▼ buttons to select a

file to view or play, and then press the

button.

Press the

button one or more

times to exit a current screen, exit

a folder, or to return to the Home

screen. Press the

退出

button to

return directly to the Home Screen.

Go to pages 18~20 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

Controlling Video Playback

You can control the playback of video

content located on a Blu-ray disc, DVD,

CD, USB device, or you computer.

Depending on the media, some of the

functions described in this manual may

not be available.

During Blu-ray or DVD disc playback,

the Full screen button does not operate.

Buttons on the Remote Control

used for Video Playback

Playback related buttons

The player does not play sound in

Search, Slow or Step mode.

•

To return to normal speed playback,

press the

button.

button

Starts playback.

button

Stops playback.

button

Pauses playback.

Fast Motion

Play

During playback, press the

button.

Each time you press the

button, the playback speed

will change.

Slow Motion

Play

In pause mode, press the

button.

Each time you press the

button, the playback speed

will change.

Step Motion

Play

In pause mode, press the

button.

Each time you press the

button, a new frame appears.

Skip Motion

Play

During playback, press the

button.

Each time you press the

button, the disc moves to the

previous or next chapter or file.

Using the disc menu, title menu,

popup menu, and title list

碟片菜单

button

During playback, press

this button to start the

disc menu function.

标题菜单

button

During playback, press

this button to start the title

menu function.

弹出菜单

button

During playback, press

this button to start the

popup menu function.

Controlling Music Playback

You can control the playback of music

located on a Blu-ray disc, DVD, CD, USB

device, or your computer.

Buttons on the Remote Control

used for Music Playback

NUMBER buttons (Audio CD (CD-DA)

only) :

During Playlist playback, press

the desired track number.

The selected track is played.

Skip : During playback, press the

button

to move to the previous or next file of the playlist.

button : Stops a track.

Fast Play (Audio CD (CD-DA) only)

During playback, press the

button.

Each time you press the

button,

the playback speed will change.

Pause : Pauses a track.

button : Plays the currently

selected track.

Repeat an Audio CD (CD-DA)/MP3

During Playlist playback, press

the

工具

button.

Pause c Select Tools

Return

00:08 / 05:57

1/6

TRACK 001