Samsung BD-H4500 取扱説明書

ブランド: Samsung

モデル: BD-H4500

カテゴリー: ブルーレイプレーヤー

タイプ: 取扱説明書

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray

™

Disc Player

user manual

BD-H4500

ENGLISH

Safety Information

Warning

•

The slots and openings in the cabinet and in

the back or bottom are provided for necessary

ventilation. To ensure reliable operation of this

apparatus, and to protect it from overheating,

these slots and openings must never be

blocked or covered.

- Do not place this apparatus in a confined

space, such as a bookcase, or built-

in cabinet, unless proper ventilation is

provided.

- Do not place this apparatus near or over

a radiator or heat register, or where it is

exposed to direct sunlight.

- Do not place vessels (vases etc.) containing

water on this apparatus. A water spill can

cause a fire or electric shock.

•

Do not expose this apparatus to rain or place it

near water (near a bathtub, washbowl, kitchen

sink, or pool, etc.). If this apparatus accidentally

gets wet, unplug it and contact an authorized

dealer immediately.

•

This apparatus uses batteries. In your

community, there might be environmental

regulations that require you to dispose of these

batteries properly. Please contact your local

authorities for disposal or recycling information.

•

Do not overload wall outlets, extension cords

or adaptors beyond their capacity, since this

can result in fire or electric shock.

•

Route power-supply cords so that they are

not likely to be walked on or pinched by items

placed on or against them. Pay particular

attention to cords at the plug end, at wall

outlets, and the point where they exit from the

apparatus.

•

To protect this apparatus from a lightning

storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable

system. This will prevent damage to the set

due to lightning and power line surges.

•

Before connecting the AC power cord to the

DC adaptor outlet, make sure the voltage

designation of the DC adaptor corresponds to

the local electrical supply.

•

Never insert anything metallic into the open

parts of this apparatus. Doing so may create a

danger of electric shock.

•

To avoid electric shock, never touch the inside

of this apparatus. Only a qualified technician

should open this apparatus.

•

Make sure to plug the power cord in until it is

firmly seated. When unplugging the power cord

from a wall outlet, always pull on the power

cord's plug. Never unplug by pulling on the

power cord. Do not touch the power cord with

wet hands.

•

If this apparatus does not operate normally -

in particular, if there are any unusual sounds or

smells coming from it - unplug it immediately and

contact an authorized dealer or service center.

•

Maintenance of Cabinet.

- Before connecting other components to this

product, be sure to turn them off.

- If you move your product suddenly from a

cold place to a warm place, condensation

may occur on the operating parts and lens

and cause abnormal disc playback. If this

occurs, unplug the product, wait for two

hours, and then connect the plug to the

power outlet. Then, insert the disc, and try

to play back again.

•

Be sure to pull the power plug out of the outlet

if the product is to remain unused or if you

are leaving the house for an extended period

of time (especially when children, elderly, or

disabled people will be left alone in the house).

- Accumulated dust can cause an electric

shock, an electric leakage, or a fire by

causing the power cord to generate sparks

and heat or the insulation to deteriorate.

•

Contact an authorized service center for

information if you intend to install your

product in a location with heavy dust, high

or low temperatures, high humidity, chemical

substances, or where it will operate 24 hours

a day such as in an airport, a train station, etc.

Failing to do so may lead to serious damage of

your product.

•

Use only a properly grounded plug and wall

outlet.

- An improper ground may cause electric

shock or equipment damage. (Class l

Equipment only.)

•

To turn this apparatus off completely, you

must disconnect it from the wall outlet.

Consequently, the wall outlet and power plug

must be readily accessible at all times.

•

Do not allow children to hang on the product.

•

Store the accessories (battery, etc.) in a

location safely out of the reach of children.

•

Do not install the product in an unstable

location such as a shaky self, a slanted floor, or

a location exposed to vibration.

•

Do not drop or strike the product. If the

product is damaged, disconnect the power

cord and contact a service center.

•

To clean this apparatus, unplug the power cord

from the wall outlet and wipe the product using

a soft, dry cloth. Do not use any chemicals

such as wax, benzene, alcohol, thinners,

insecticide, air fresheners, lubricants, or

detergent. These chemicals can damage the

appearance of the product or erase the printing

on the product.

•

Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases on the apparatus.

•

Do not dispose of batteries in a fire.

•

Do not plug multiple electric devices into the

same wall socket. Overloading a socket can

cause it to overheat, resulting in a fire.

•

There is danger of an explosion if you replace

the batteries used in the remote with the wrong

type of battery. Replace only with the same or

equivalent type.

•

WARNING - TO PREVENT THE

SPREAD OF FIRE, KEEP CANDLES

AND OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

This symbol indicates that high voltage

is present inside. It is dangerous to make

any kind of contact with any internal

part of this product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a

CLASS 1 LASER product. Use of controls,

adjustments or performance of procedures

other than those specified herein may result

in hazardous radiation exposure.

CAUTION :

•

THIS PRODUCT USES AN INVISIBLE

LASER BEAM WHICH CAN CAUSE

HAZARDOUS RADIATION EXPOSURE

IF DIRECTED. BE SURE TO OPERATE

PRODUCT CORRECTLY AS

INSTRUCTED.

•

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE. DO NOT

OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO

QUALIFIED PERSONNEL.

This product satisfies CE regulations

when shielded cables and connectors

are used to connect the unit to other

equipment. To prevent electromagnetic

interference with electric appliances, such

as radios and televisions, use shielded

cables and connectors for connections.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

✎

NOTES

If the Region number of a Blu-ray Disc/

DVDs does not correspond to the Region

number of this player, the player cannot

play the disc.

IMPORTANT NOTE

The mains lead on this equipment is

supplied with a molded plug incorporating

a fuse. The value of the fuse is indicated

on the pin face of the plug.

If it requires replacing, a fuse approved to

BS1362 of the same rating must be used.

Never use the plug with the fuse cover

omitted if the cover is detachable. If a

replacement fuse cover is required, it

must be of the same colour as the pin

face of the plug. Replacement covers are

available from your dealer.

If the fitted plug is not suitable for the

power points in your house or the cable

is not long enough to reach a power

point, you should obtain a suitable safety

approved extension lead or consult your

dealer for assistance.

However, if there is no alternative to

cutting off the plug, remove the fuse and

then safely dispose of the plug. Do not

connect the plug to a mains jack, as there

is a risk of shock hazard from the bared

flexible cord.

To disconnect the apparatus from the

mains, the plug must be pulled out from

the mains socket, therefore the mains plug

shall be readily operable.

The product unit accompanying this

user manual is licenced under certain

intellectual property rights of certain third

parties.

Precautions

Important Safety Instructions

Read these operating instructions

carefully before using the unit. Follow all

the safety instructions listed below.

Keep these operating instructions

handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near

water.

Clean only with a dry cloth.

Do not block any ventilation

openings. Install in accordance with

the manufacturer's instructions.

Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

AV receivers) that produce heat.

Do not defeat the safety purpose

of the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being

walked on or pinched particularly

at plugs, convenience receptacles,

and the point where it exits the

apparatus.

11.

Only use attachments/accessories

specified by the manufacturer.

12.

Use only with the

cart, stand, tripod,

bracket, or table

specified by the

manufacturer,

or sold with

the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from tip-

over.

13.

Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14.

Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as when the power-supply cord or

plug is damaged, liquid has been

spilled or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

Contents Getting Started

Before using the User Manual

Disc Types and Contents your player can play

Media Disc Type Details

VIDEO

Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-

R/+R that have been recorded and finalized, or a USB

storage media containing DivX, MKV or MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R

or a USB storage media containing MP3 or WMA

contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-

RE/-R or a USB storage media containing JPEG

contents.

✎

NOTES

The player may not play certain CD-RW/-R and DVD-R because of the disc type or

recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate

that exceeds 10 Mbps.

Your player will not play content that has been recorded on a BD-R or USB device

at a bit rate that exceeds 25 Mbps.

Playback may not work for some types of discs, or when you use specific

functions, such as angle change and aspect ratio adjustment. Information about

the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some

functions may perform slowly.

SAFETY INFORMATION

Warning ....................................... 2

Precautions ................................. 3

GETTING STARTED

Before using the User Manual ...... 4

Logos of Discs the

player can play ............................ 5

Accessories ................................. 7

Front Panel .................................. 7

Rear Panel ................................... 7

Remote Control ........................... 8

CONNECTIONS

Connecting to a TV ...................... 8

Connecting to an Audio System .. 9

SETTINGS

The Initial Settings Procedure ...... 9

Menu Navigation .......................... 9

Accessing the Settings Menu .... 10

Display Settings ......................... 10

Audio Settings ........................... 11

System Settings ........................ 12

Language Settings ..................... 12

Security Settings ....................... 12

Support Settings ....................... 13

MEDIA PLAY

Playing a Commercially

Recorded Disc ........................... 13

Playing Files on a USB Device ... 13

Playing a Disc with User

Recorded Content ..................... 14

Controlling Video Playback ........ 14

Controlling Music Playback ........ 15

Playing Photo Contents ............. 16

APPENDIX

Troubleshooting ......................... 17

Specifications ............................ 18

Disc types your player cannot play

•

HD DVD

•

DVD-ROM/PD/

MV, etc

•

DVD-RAM

•

Super Audio CD

(except CD layer)

•

DVD-RW (VR

mode)

•

CVD/CD-ROM/

CDV/CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

•

3.9 GB DVD-R for

Authoring.

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc to play. If the codes do not match, the

disc will not play.

The Region Number for this player is displayed on the rear panel of the player.

Disc Type

Region

Code

Area

Blu-ray

Disc

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and South Asia.

DVD-

VIDEO

The U.S., U.S. territories and Canada

Europe, Japan, the Middle East, Egypt, Africa, Greenland

Taiwan, Korea, the Philippines, Indonesia, Hong Kong

Mexico, South America, Central America, Australia, New

Zealand, Pacific Islands, Caribbean

Disc Type

Region

Code

Area

DVD-

VIDEO

Russia, Eastern Europe, India, North Korea, Mongolia

China

Logos of Discs the player can play

Blu-ray Disc DivX

PAL broadcast System in U.K., France,

Germany, etc.

Supported File Formats

Notes on the USB connection

•

Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.

•

The player does not support folder or file names longer than 128 characters.

•

Some USB/External HDD/digital camera devices may not be compatible with the player.

•

Your player supports the FAT16, FAT32, and NTFS file systems.

•

Connect USB devices directly to the player’s USB port. Connecting through a USB

cable may cause compatibility problems.

•

Inserting more than one memory device into a multi-card reader may cause the

reader to operate improperly.

•

The player does not support the PTP protocol.

•

Do not disconnect a USB device during a "loading" process.

•

The bigger the image resolution, the longer the image takes to display.

•

This player cannot play MP3 files with DRM (Digital Rights Management) downloaded

from commercial sites.

•

Your player only supports video with a frame rate under 30fps (frames per second).

•

Your player only supports USB Mass Storage Class (MSC) devices such as thumb

drives and USB HDD. (HUB is not supported.)

•

Certain USB HDD Devices, multi-card readers and thumb drives may not be

compatible with this player.

•

If some USB devices require excessive power, they may be limited by the circuit safety device.

•

If playback from a USB HDD is unstable, provide additional power by plugging the

HDD into a wall socket.

If the problem continues, contact the USB HDD manufacturer.

•SAMSUNG is not responsible for any data file damage or data loss.

•

Your player does not support NTFS compressed files, sparse files, or encrypted files.

•

You can repair or format a USB device on your Desktop PC. (MS-Windows OS only).

Video File Support

File

Extension

Container Video Codec

Audio

Codec

Resolution

*.avi

AVI

DivX 3.11/4/5/6

MP3

Dolby Digital

DTS

WMA

PCM

1920x1080

MP4v3

H.264 BP/MP/HP

1920x1080

*.mkv

MKV

VC-1 AP MP3

Dolby Digital

DTS

1920x1080

H.264 BP/MP/HP

1920x1080

*.wmv

WMV (wmv9)

VC-1 AP

WMA

1920x1080

VC-1 SM

1920x1080

*.mp4

MP4

MP4 (mp4v)

AAC

1920x1080

H.264 BP/MP/HP

1920x1080

*.mpg

*.mpeg

MPEG1

MP1, 2

Dolby Digital

DTS

1920x1080

MPEG2

1920x1080

H.264 BP/MP/HP

1920x1080

*.rmvb

RMVB

RV8/9/10

(RV30/40)

RealAudio 6

1920x1080

• Limitations

- Even when a file is encoded by a supported codec listed above, the file might not

be played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the

file itself is corrupted.

- Files having a higher Bit rate/frame rate than standard may stutter during sound/

video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

- Depending on your country, RMVB format may not be supported.

• Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

• Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)

Max bit rate: 320kbps



Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

✎

NOTES

Playback of some DivX, MKV or MP4 file may not be supported depending on their

video resolution and frame rate.

Music File Support

File

Extension

Container

Audio

Codec

Support Range

*.mp3

MP3 MP3

*.wma

WMA WMA

* Sampling rates (in kHz) - 8, 11, 16, 22,

32, 44.1, 48

Bit rates - All bit-rates from 5kbps to 355kbps

Picture File Support

File Extension Type Resolution

*.jpg

*.jpeg

*.jpe

JPEG

15360x8640

*.png

PNG

15360x8640

AVCHD (Advanced Video Codec High Definition)

•This player can play back AVCHD format discs. These discs are

normally recorded and used in camcorders.

•The AVCHD format is a high definition digital video camera format.

•The MPEG-4 AVC/H.264 format compresses images with greater

efficiency than the conventional image compressing format.

•Some AVCHD discs use the "x.v.Color" format. This player can play

back AVCHD discs that use "x.v.Color" format.

•"x.v.Color" is a trademark of Sony Corporation.

•"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic

Industrial Co., Ltd. and Sony Corporation.

✎

NOTES

Some AVCHD format discs may not play, depending on the recording condition.

AVCHD format discs need to be finalized.

"x.v.Color" offers a wider colour range than normal DVD camcorder discs.

Accessories

Check for the supplied accessories shown below.

HDMI Cable

Batteries for Remote

Control (AAA Size)

User Manual Remote Control

Front Panel

USB HOST

REMOTE CONTROL SENSOR

DISC TRAY

PLAY/PAUSE BUTTON

OPEN/CLOSE BUTTON

POWER BUTTON

✎

NOTES

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play

button on the player or the remote. To play the movie, you must select Play Movie or Start in the

disc menu, and then press the

button.

You can perform software upgrades using the USB Host jack with a USB flash memory stick only.

Rear Panel

HDMI OUT

Remote Control

Tour of the Remote Control

Turn the player on and off.

Allows you to repeat A-B disc.

(This function might be not available or work

not correctly, depends on type of disc or

recording conditions).

Press numeric buttons to operate options.

Press to open and close the disc tray.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to stop a disc.

Press to use bonusview function.

Return to the previous menu.

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

Use to select menu items and change menu

values.

Press to use Tools menu.

Use to access various audio functions on a

disc (Blu-ray Disc/DVD).

Press to play a disc.

Press to pause a disc.

Turn the TV on and off.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Use to enter the popup menu/title menu.

Press to search a disc backwards or

forwards.

Press to move to the home menu.

Press to see the full screen on a TV.

During the bluray disc/DVDs playback, this

button does not operate.

Press to exit the menu.

Use to display the playback information.

Allows you to repeat a title, chapter, track or

disc. (This function might be not available or

work not correctly, depends on type of disc

or recording conditions).

TV volume adjustment.

After setup, allows you to set the input

source on your TV.

Installing batteries

✎

NOTES

If the remote does not operate properly:

•

Check the polarity (+/–) of the batteries.

•

Check if the batteries are drained.

•

Check if the remote sensor is blocked by obstacles.

•

Check if there is any fluorescent lighting nearby.

CAUTION

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash

Do not dispose of batteries in a fire.

Do not short circuit, disassemble or overheat the batteries.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Connections

Connecting to a TV

Connect an HDMI cable from the HDMI OUT jack on the back of the

product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made

all the other connections.

- When you change the connections, turn off all devices before you start.

Audio

Video

✎

NOTES

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital

Audio Out on the player to an audio system to hear audio.

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual

of your TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the

first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI

cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears

on the screen.

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using one of the

methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made

all the other connections.

- When you change the connections, turn off all devices before you start.

Connecting to an HDMI supported AV receiver

•Connect an HDMI cable from the HDMI OUT jack on the back of the

product to the HDMI IN jack on your receiver.

•Best quality (Recommended)

Audio

Settings

The Initial Settings Procedure

•

The Home screen will not appear if you do not

configure the initial settings.

•

The OSD (On Screen Display) may change in this

player after you upgrade the software version.

•

The access steps may differ depending on the

menu you selected.

•

After the initial settings process is complete, the

panel buttons and remote control can be operated.

After you have connected the player to

your TV, turn on the TV and player. When

you turn on the player the first time, the

player's Initial Settings screen appears on

the TV. The Initial Setting procedure lets

you set the On Screen menu languages,

the aspect ratio (screen size).

✎

NOTES

If you want to display the Initial Setting screen

again to make changes, press the

button on

the top panel of the player for more than 5 seconds

with no disc inserted. This resets the player to its

default settings.

After the initial settings process is complete. you

can operate the HDMI-CEC function.

If you want to use the Anynet+(HDMI-CEC) function

to aid in the initial set up process, please follow the

instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

If you leave the player in the stop mode for more

than 5 minutes without using it, a screen saver will

appear on your TV. If the player is left in the screen

saver mode for more than 25 minutes, the power

will automatically turn off.

Menu Navigation

HOME Button : Press to move to the

Home menu.

Button : Return to the previous menu.

(Enter) / DIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

退出

Button : Press to exit the current menu.

BD Wise (Samsung TVs only)

BD Wise is Samsung’s latest inter-

connectivity feature.

When you connect a Samsung player

and a Samsung TV with BD Wise to each

other via HDMI, and BD Wise is on in both

the player and TV, the player outputs video

at the video resolution and frame rate of

the Blu-ray Disc/DVDs.

✎

NOTES

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise

appears in the Resolution menu.

If the player is connected to a device that does

not support BD Wise, you cannot use the BD

Wise function.

For proper operation of BD Wise, set the BD

Wise menu of both the player and the TV to On.

Resolution

Lets you set the output resolution of

the HDMI video signal to Auto, 1080p,

1080i, 720p or 576p/480p. The number

indicates the number of lines of video per

frame. The i and p indicate interlaced and

progressive scan, respectively. The more

lines, the higher the quality.

Resolution according to the

output mode

•Blu-ray Disc/E-contents/Digital

Contents playback

Output

Setup

HDMI / connected

HDMI Mode

Blu-ray

Disc

E-contents/

Digital

contents

BD Wise

Resolution of

Blu-ray Disc

1080p

Auto

Max. Resolution

of TV input

Max. Resolution of

TV input

1080p@60F

(Movie Frame : Off)

1080p@60F 1080p@60F

Movie Frame :

Auto (24 fps)

1080p@24F 1080p@24F

1080i 1080i 1080i

720p 720p 720p

576p/480p 576p/480p 576p/480p

•DVD playback

Output

Setup

HDMI / connected

HDMI Mode

BD Wise 576i/480i

Auto Max. Resolution of TV input

1080p 1080p

1080i 1080i

720p 720p

576p/480p 576p/480p

•Home Menu

Change Device

Settings

Play disc Photos Videos Music

No disc

Selects Videos.

Selects Music.

Selects Settings.

Selects Change Device.

Selects Play disc.

Selects Photos.

✎

NOTES

The Videos, Photos, and Music options

require that you have an appropriate disc

inserted into the player or a USB flash

device attached to the player.

Accessing the Settings Menu

To access the Settings menu and

sub-menus, follow these steps:

Press the POWER button.

The Home Menu appears.

Press the

▲▼

◄► buttons to

select Settings, and then press

the

button.

Press the ▲▼ buttons to select

the desired submenu, and then

press the

button.

Press the ▲▼ buttons to select

the desired item, and then press

the

button.

Press the

退出

button to exit the

menu.

✎

NOTES

The access steps may differ depending

on the menu you selected. The OSD (On

Screen Display) may change in this player

after you upgrade the software version.

Display Settings

You can configure various display options

such as the TV Aspect Ratio, Resolution, etc.

TV Aspect Ratio

Depending on the type of television you have,

you may want to adjust the screen size setting.

✎

NOTES

Depending on the disc type, some aspect

ratios may not be available.

If you select an aspect ratio and option

which is different than the aspect ratio of

your TV screen, the picture might appear to

be distorted.

✎

NOTES

If the TV you connected to the player does

not support Movie Frame or the resolution

you selected, the message "If no pictures

are shown after selecting ‘Yes’, please wait

for 15 seconds to return to the previous

resolution. Do you want to change the

resolution?" appears. If you select Yes, the

TV’s screen will go blank for 15 seconds,

and then the resolution will revert to the

previous resolution automatically.

If the screen stays blank after you have

changed the resolution, remove all discs, and

then press and hold the

button on the

top of the player for more than 5 seconds. All

settings are restored to the factory default.

Follow the steps on the previous page to

access each mode and select the Display

Setup that your TV will support.

When the factory default settings are

restored, all stored user BD data is deleted.

The Blu-ray Disc must have the 24 frame

feature for the player to use the Movie

Frame (24 fps) mode.

Movie Frame (24 fps)

Setting the Movie Frame (24 fps) feature

to Auto allows you to adjust the player’s

HDMI output to 24 frames per second

for improved picture quality.

You can enjoy the Movie Frame (24 fps)

feature only on a TV supporting this

frame rate. You can select Movie Frame

only when the player is in the HDMI

1080p output resolution modes.

HDMI Colour Format

Lets you set the colour space format for

HDMI output to match the capabilities of

the connected device (TV, monitor, etc).

HDMI Deep Colour

Lets you output video from the HDMI

OUT jack with Deep Colour. Deep

Colour provides more accurate colour

reproduction with greater colour depth.

Progressive Mode

Lets you improve picture quality

when viewing DVDs.

Audio Settings

Digital Output

Lets you select the digital audio output

format that is suitable for your TV or AV

Receiver. For more details, please refer

to the Digital Output Selection table.

Digital Output Selection

Setup PCM

Bitstream

(Unprocessed)

Bitstream

(Re-encoded

DTS)

Bitstream

(Re-encoded Dolby

Connection HDMI Receiver HDMI Receiver HDMI Receiver

HDMI supported AV

receiver

Audio

Stream on

Blu-ray

Disc

PCM Up to 7.1ch PCM Re-encoded DTS

Re-encoded Dolby

Digital *

Dolby Digital PCM 2ch Dolby Digital Re-encoded DTS

Re-encoded Dolby

Digital *

Dolby Digital

Plus

PCM 2ch Dolby Digital Plus Re-encoded DTS

Re-encoded Dolby

Digital *

Dolby TrueHD PCM 2ch Dolby TrueHD Re-encoded DTS

Re-encoded Dolby

Digital *

DTS PCM 2ch DTS Re-encoded DTS

Re-encoded Dolby

Digital *

DTS-HD High

Resolution

Audio

PCM 2ch

DTS-HD High

Resolution Audio

Re-encoded DTS

Re-encoded Dolby

Digital *

DTS-HD

Master Audio

PCM 2ch

DTS-HD Master

Audio

Re-encoded DTS

Re-encoded Dolby

Digital *

Audio

Stream on

DVD

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Dolby Digital PCM 2ch Dolby Digital Dolby Digital Dolby Digital

DTS PCM 2ch DTS DTS DTS

Definition

for Blu-ray

Disc

Any

Decodes main

feature audio and

BONUSVIEW audio

stream together into

PCM audio and add

Navigation Sound

Effects.

Outputs only main

feature audio stream

so that your AV

receiver can decode

the audio bitstream.

You will not hear

BONUSVIEW audio

and Navigation

Sound Effects.

Decodes main

feature audio and

BONUSVIEW audio

stream together into

PCM audio and add

Navigation Sound

Effects, then re-

encodes the PCM

audio into DTS

bitstream

Decodes main feature

audio and BONUSVIEW

audio stream together

into PCM audio and add

Navigation Sound Effects,

then re-encodes the PCM

audio into Dolby Digital

bitstream

* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.

Blu-ray Discs may include three audio streams :

- Main Feature Audio : The audio soundtrack of the main feature.

- BONUSVIEW audio : An additional soundtrack such as the director or

actor’s commentary.

- Navigation Sound Effects : When you choose a menu navigation selection, a

Navigation Sound Effect may sound. Navigation Sound Effects are different on each

Blu-ray Disc.

✎

NOTES

Be sure to select the correct Digital Output or

you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio

and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your

Digital Output selections (PCM or Bitstream).

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

If your TV is not compatible with PCM

sampling rates over 48kHz, the player may

output 48kHz downsampled PCM audio.

Dynamic Range Control

Lets you apply dynamic range control

to Dolby Digital, Dolby Digital Plus, and

Dolby True HD audio.

•

uto : Automatically controls the dynamic

range of Dolby TrueHD audio, based on

information in the Dolby TrueHD soundtrack.

Also turns dynamic range control on for

Dolby Digital and Dolby Digital Plus.

•

Off : Leaves the dynamic range

uncompressed, letting you hear the original

sound.

•

On : Turns dynamic range control on for all

three Dolby formats. Quieter sounds are

made louder and the volume of loud sounds

is reduced.

Downmixing Mode

Lets you select the multi-channel downmix

method that is compatible with your

stereo system. You can choose to have

the player downmix to normal stereo or to

surround compatible stereo.

System Settings

Initial Settings

By using the Initial Settings function,

you can set the language, etc.

For more information about the

Initial Settings function, refer to the

Initial Settings section of this user

manual (See page 9).

Quick Start

You can turn on the power quickly

by decreasing the boot time.

✎

NOTES

If this function is set to On, Standby

power consumption will be increased.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers

linked operations with other Samsung players

that have the Anynet+ feature.

To operate this function, connect this player

to an Anynet+ Samsung TV with an HDMI

cable.

With Anynet+ on, you can operate this player

using a Samsung TV remote control and start

disc playback simply by pressing the PLAY (

) button on the TV’s remote control.

For more information, please see the TV user

manual.

✎

NOTES

This function is not available if the HDMI cable

does not support CEC.

If your Samsung TV has an Anynet+ logo, then

it supports the Anynet+ function.

Depending on your TV, certain HDMI output

resolutions may not work.

Please refer to the user manual of your TV.

After the product was turned off,

disconnecting and connecting the power cable

turns it on automatically. At the moment, it

automatically turns off in about 15 seconds

for re-establishing Anynet+ connection.

For some TV products, if connected to this

product with Anynet+ function, turning the TV on

may display a warning popup message saying no

connection was found. Still, Anynet+ connection

is properly established and available to use.

BD Data Management

Enables you to manage the downloaded

contents you accessed through a Blu-ray

disc that supports and stored on a flash

drive.

You can check the device’s information

including the storage size, delete the BD

data, or change the Flash memory device.

✎

NOTES

In the external memory mode, disc playback may

be stopped if you disconnect the USB device in the

middle of playback.

Your player supports the FAT16, FAT32, and NTFS

file systems. We recommend you use USB devices

that support USB 2.0 protocol with 4 MB/sec or

faster read/write speed.

The Resume Play function may not work after you

format the storage device.

The total memory available to BD Data Management

may differ, depending on the conditions.

DivX® Video On Demand

View DivX® VOD Registration Codes to

purchase and play DivX® VOD contents.

Language Settings

You can select the language you

prefer for the On-Screen menu,

disc menu, audio, and subtitles.

✎

NOTES

The selected language will only

appear if it is supported on the disc.

Security Settings

The default security PIN is 0000. Enter the

default PIN to access the security function

if you haven't created your own PIN. After

you have accessed the security function

for the first time, change the PIN using the

Change PIN function.

BD Parental Rating

Prevents playback of Blu-ray Discs with specific

age ratings unless the 4 digit PIN is entered.

DVD Parental Rating

This function works in conjunction with DVDs

that have been assigned an age rating or

numeric rating that indicates the maturity level

of the content. These numbers help you control

the types of DVDs that your family can watch.

Select the rating level you want to set. For

example, if you select Level 6, discs rated above

6 - Level 7 and 8 - will not play.

A larger number indicates more mature content.

Change PIN

Change the 4-digit password used

to access security functions.

If you forget your password

Remove any discs.

Press and hold the

button on the

top panel for 5 seconds or more.

All settings will revert to the factory

settings.

✎

NOTES

When the factory default settings are restored,

all the user stored BD data will be deleted.

Support Settings

Software Upgrade

The Software Upgrade menu allows you to

upgrade the player’s software for performance

improvements or additional services.

By USB

To upgrade by USB, follow these steps:

Visit www.samsung.com/

bluraysupport.

Download the latest USB software

upgrade zip archive to your computer.

Unzip the zip archive to your computer.

You should have a single RUF file with

the same name as the zip file.

Copy the RUF file to a USB flash drive.

Make sure there is no disc in the

player, and then insert the USB flash

drive into the USB port of the player.

In the player’s menu, go to Settings >

Support > Software Upgrade.

Select By USB.

✎

NOTES

No disc should be in the product

when you upgrade the software

using the USB Host jack.

When the software upgrade is done,

check the software details in the

software Upgrade menu.

Do not turn off the player during the

software upgrade. It may cause the

player to malfunction.

Software upgrades using the USB

Host jack must be performed with a

USB flash memory stick only.

Contact Samsung

Provides contact information for

assistance with your player.

Reset

Returns all settings to their factory

defaults except for the network settings.

Media Play

Playing a Commercially

Recorded Disc

Press the

button to open the

disc tray.

Place a disc gently into the disc tray

with the disc's label facing up.

Press the

button to close

the disc tray. Playback starts

automatically.

Playing Files on a USB Device

There are two methods you can use to

play or view multimedia files located on

a USB device through your player.

Method 1

Turn the player on.

Connect the USB device to the

USB port on the front panel

of the player. The New Device

Connected pop-up appears.

Change Device

Settings

Play disc Photos Videos Music

No disc

New device connected.

Photos

Videos

Music

123

Move

Enter

Return

✎

NOTES

If the pop-up does not appear, go to

Method 2.

Use the ▲▼ buttons to select Photos,

Videos or Music, and then press the

button. The Photos, Videos & Music

screen appears listing the content of the

device. Depending on how the contents

is arranged, you will see either folders,

individual files, or both.

✎

NOTES

Even though the player will display folders

for all content types, it will only display files

of the Content Type you selected in Step

3. For example, if you selected music, you

will only be able to see music files. You can

change this selection by returning to the

Photos, Videos & Music screen and going

to Step 3 in Method 2 below.

If necessary, use the ▲▼◄►

buttons to select a folder, and

then press the

button.

Select a file to view or play, and

then press the

button.

Press the

button to exit

a folder or the

退出

button to

return to the Home screen.

Go to pages 14~16 for instructions that

explain how to control playback of videos,

music, and pictures on a USB device.

Method 2

Turn the player on.

Connect the USB device to the USB

port on the front panel of the player.

Select Change Device and then

press the ▲▼ button to select USB.

Press the

button.

Change Device

Settings

Play disc Photos Videos Music

No disc

Change Device

No Disc

123

Use the ▲▼◄► buttons to select

Photos, Videos or Music on the

Home screen, and then press the

button. The Photos, Videos & Music

screen appears listing the content of

the device. Depending on how the

contents is arranged, you will see

either folders, individual files, or both.

✎

NOTES

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 3. For

example, if you selected music, you will only

be able to see music files. You can change

this selection by returning to the Photos,

Videos & Music screen and repeating Step 3.

If necessary, use the ▲▼◄►

buttons to select a folder, and then

press the

button.

Use the ▲▼◄► buttons to select

a file to view or play, and then

press the

button.

Press the

button to exit a

folder or the

退出

button to return

to Home screen.

Go to pages 14~16 for

instructions that explain how to

control playback of videos, music,

and pictures on a USB device.

✎

NOTES

If you insert a disc when playing

a USB device, the device mode

changes to "Disc" automatically.

Playing a Disc with User

Recorded Content

You can play multimedia files you have

recorded on Blu-ray, DVD, or CD discs.

Place a user recorded disc into the

disc tray with the disc’s label facing

up, and then close the tray.

Use the ◄► buttons to select the

type of content you want to view or

play - Videos, Photos, or Music -

and then press the

button.

✎

NOTES

Even though the player will display

folders for all content types, it will only

display files of the Content Type you

selected in Step 2. For example, if you

selected music, you will only be able

to see music files. You can change

this selection by returning to the Home

screen and repeating Step 2.

A screen appears listing the contents

of the disc. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

If necessary, use the ▲▼◄►buttons

to select a folder, and then press the

button.

Use the ◄►▲▼ buttons to select a

file to view or play, and then press the

button.

Press the

button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the

退出

button to return directly

to the Home Screen.

Go to pages 14~16 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

Controlling Video Playback

You can control the playback of video

content located on a Blu-ray disc, DVD,

CD, USB device. Depending on the

media, some of the functions described

in this manual may not be available.

During Blu-ray or DVD disc playback,

the Full screen button does not operate.

Buttons on the Remote Control

used for Video Playback

Playback related buttons

The player does not play sound in

Search, Slow or Step mode.

•To return to normal speed

playback, press the

button.

button

Starts playback.

button

Stops playback.

button

Pauses playback.

Fast Motion

Play

During playback, press the

button.

Each time you press the

button, the playback

speed will change.

Slow Motion

Play

In pause mode, press the

button.

Each time you press the

button, the playback

speed will change.

Step Motion

Play

In pause mode, press the

button.

Each time you press the

button, a new frame appears.

Skip Motion

Play

During playback, press the

button.

Each time you press the

button, the disc moves to the

previous or next chapter or file.

Using the disc menu, title menu,

popup menu, and title list

碟片菜单

button

During playback, press

this button to start the

disc menu function.

标题菜单

button

During playback, press

this button to start the title

menu function.

弹出菜单

button

During playback, press

this button to start the

popup menu function.

Playlist

To move to the Music List, press

the

button.

The Music List screen appears.

1/2 Page

Music

TRACK 001