Hitachi CJ 160v Handling Instructions Manual

Hitachi
ブランド
Hitachi
モデル
CJ 160v
カテゴリー
パワーツール
タイプ
Handling Instructions Manual
English
Jig Saw
CJ 160V
Handling instructions
Keep for future reference
2
3
4
5
n
0
V ---/min
A
W
6
7
I
II
III
I II III
2
3
4
5
1
A
2800 /min
1400 /min
800 /min
8
III
9
10
11
I
°
12
I
II
13
14
15
English
16
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk of electric shock.
CONTENTS
GENERAL POWER TOOL SAFETY WARNINGS ........................................16
JIG SAW SAFETY WARNINGS ....................................................................18
ADDITIONAL SAFETY WARNINGS .............................................................18
SYMBOLS ....................................................................................................19
SPECIFICATIONS ........................................................................................ 19
STANDARD ACCESSORIES .......................................................................20
APPLICATIONS ............................................................................................20
PRIOR TO OPERATION ...............................................................................20
CUTTING ......................................................................................................24
CONCERNING CUTTING OF STAINLESS STEEL PLATES .......................26
SELECTION OF BLADES ............................................................................ 26
HOUSING THE HEXAGONAL BAR WRENCH ............................................ 26
CONNECTING WITH CLEANER .................................................................. 27
MAINTENANCE AND INSPECTION ............................................................27
SELECTING ACCESSORIES .......................................................................30
English
17
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool.
Do not use a power tool while you are tired or under the infl uence of drugs,
alcohol or medication.
A moment of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the
tool.
Carrying power tools with your fi nger on the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
English
18
b) Do not use the power tool if the switch does not turn it on and off .
Any power tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aff ect the power toolʼs
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations diff erent from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a qualifi ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
CAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of children and infi rm persons.
JIG SAW SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
ADDITIONAL SAFETY WARNINGS
1. This Jig saw employs a high-power motor. If the machine is used continuously at
low speed, an extra load is applied to the motor which can result in motor seizure.
Always operate the power tool so that the blade is not caught by the material
during operation. Always adjust the blade speed to enable smooth cutting.
English
19
2. Dust produced in operation
The dust produced in normal operation may aff ect the operator’s health. Either of
following way is recommended.
a) Wear a dust mask
b) Use external dust collection equipment.
When using the external dust collection equipment, connect the adapter with the
hose from external dust collection equipment.
3. During use, do not touch the metal portion of the tool.
4. RCD
The use of a residual current device with a rated residual current of 30 mA or less
at all times is recommended.
SYMBOLS
WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
Read all safety warnings and all
instructions.
n
0
No-load speed
V
Rated voltage
---/min
revolutions or reciprocations per
minute
A
Current Class II tool
W
Watt
SPECIFICATIONS
Voltage 220 V
Power Input 800 W
Max. Cutting Depth Wood 160 mm Mild Steel 10 mm
No-load speed 800 – 2800 /min
Stroke 26 mm
Min. Cutting Radius 25 mm
Weight (without cord) 2.5 kg
English
20
STANDARD ACCESSORIES
See the list below to check the accessories for CJ160V.
Blades (No. 41, No. 42, No. 123X)
No. 41: Refer to Table 1 on page 29
No. 42: Same with No. 12 (Table 1 on page 29)
No. 123X: Mild steel plate 1.5 – 10 mm
1 each
Sub base
1
Hexagon bar wrench
1
Splinter guard
1
Dust collector
1
Chip cover
1
APPLICATIONS
○
Cutting various lumber and pocket cutting
○
Cutting mild steel plate, aluminum plate, and copper plate
○
Cutting synthetic resins, such as phenol resin and vinyl chloride
○
Cutting thin and soft construction materials
○
Cutting stainless steel plate (with No. 97 blade)
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms to the power requirements specifi ed
on the product nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
which could cause a serious accident.
3. Extension cord
When the work area is removed from the power source, use an extension cord of suffi cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4. Check the receptacle
If the receptacle only loosely accepts the plug, the receptacle must be repaired.
Contact a licensed electrician to make appropriate repairs.
If such a faulty receptacle is used, it may cause overheating, resulting in a serious hazard.
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Hitachi CJ 160v Handling Instructions Manual

Hitachi
ブランド
Hitachi
モデル
CJ 160v
カテゴリー
パワーツール
タイプ
Handling Instructions Manual
PDFをダウンロードします
報告

他の言語で

関連論文

その他のドキュメント