Design Cooperation with Wood and Burn, Ayan00n, nisidak MADE IN KOREA
ST-032FW
Ver 1.01
Takibi Fireplace Wall Floga L
ST-032FW
Instruction Manual : Ver 1.01
Design Cooperation with Wood and Burn, Ayan00n, nisidakMADE IN KOREA
SpecificationsSet Contents (Name of the Parts)
Material : Body / Metal (Stainless Steel), Carrying Case / Polyester
Used Size : 475 x 475 x 200 (h) mm (18.7” x 18.7” x 7.9” h)
Storage Size : 385 x 200 x 180 (h) mm(15.1” x 7.9” x 7.1” h)
Weight : 4.8 kg 10.6lb
Thank you very much for purchasing a Snow Peak product. This product is an optional addition designed for use with the Pack & Carry Fireplace L(ST-032R, ST-032RS) and the Fireplace in the Takibi Fire & Grill
(ST-032SET, ST-032SETS). To use this product safely and correctly, please read these instructions carefully. After reading these instructions, keep this manual in a safe place for future reference. If you find anything
in the instruction manual that is difficult to understand, or if you find a defect with the product, stop use immediately and contact the dealers where you purchased the product or Snow Peak Customer Service.
Before use: please read thoroughly to ensure safety and avoid accidents.
DANGER / Misuse could easily result in a serious accident or death.
WARNING / Improper use may result in death or serious injury.
CAUTION / Misuse could result in injury to the user and/or property damage
Please ensure the body is cool before cleaning. Also, do not subject the product to rapid tempera-
ture changes such as spraying with water while the product is hot. Rapid temperature changes
may cause deformation or damage.
Be sure to use both hands when installing or storing the product. Please note that improper
handling may cause injury or damage to the product.
The product may change color or be slightly distorted, but this does not affect the quality or performance.
This product is made of stainless steel. it may rust depending on the operating conditions and
surrounding environment.
Please check with your local government or administrator when you make a fire in public places
such as parks, riverbeds, and campsites. Do not use this product in areas where the use of fire or
barbeques are prohibited.
Please do not use this product for incinerating waste, as this may be a violation of local waste
management laws .
Do not cook while using this product. Using this product with a grill or iron plate on top may cause
unexpected accidents or injuries.
Do not use this product when burning charcoal.
Do not use this product in combination with other optional accessories such as the Grill Bridge.
Please be careful not to pinch your fingers or hands while assembling or disassembling this product.
The structure of the body has sharp parts. Use caution when handling to avoid injuries or
accidents.
This product is for outdoor use only. Do not use the product inside a house, tent, car, or confined
space. Please use it outdoors in an area with adequate ventilation.
Before using this product, please carefully read the instruction manual of the Pack & Carry Fireplace L.
If using a gas torch to light the wood, keep a sufficient distance between the gas torch and this
product
Before use, ensure there are no flammable or heat-sensitive substances near the product.
Additionally, do not use this product near flammable objects such as a tent or a tarp. Do not use it
in areas where wildfire danger is high, such as on dry grass or near dried debris.
Please do not install this product on anything other than Pack & Carry Fireplace L (ST-032R,
ST-032RS) and the Fireplace in the Takibi Fire & Grill (ST-032SET, ST-032SETS).
If the firewood is stacked too high, the flames will grow too large, potentially causing accidents or
injuries.
Avoid using this product on sloped or in unstable areas as it may tip over. Once set up, ensure
there is no looseness between the fireplace and the product.
It is very dangerous to use this product in strong winds. If the wind becomes strong during use,
please extinguish the fire and discontinue use.
Please note that this product may become extremely hot during use. Please pay close attention to
the weather and surrounding conditions. It is very dangerous if small children play around the fire.
It is dangerous to move this product during use.
It is dangerous to install this product on the fireplace when a fire is already burning. Always install
the product on the fireplace before starting a fire.
Before using the product, check each part for abnormalities. If there are abnormalities, take the product
for inspection or repair by the dealer where you purchased the product or Snow Peak Customer Service.
Bonfire (takibi) can be very dangerous if not handled properly. This product will not avoid or mitigate those hazards. This product is safe, provided you follow the instructions and
use the product in a responsible manner. Please read and understand this manual thoroughly before use.
Maintenance
When cleaning the product, using a scrub brush made of abrasive materials may damage the
surface. After washing, wipe off excess water with a cloth. Set the product to dry in a well-ventilated,
shaded area.
Store in a dry place with no moisture.
If the case gets dirty, wipe it off with a cloth soaked in neutral detergent. Do not use chemicals such
as thinners or benzine.
The specifications of Snow Peak products are based on field testing and quality control to ensure the correct function and longevity of every product. If apparent defects in the
manufacturing of the product are found, the defective product will be repaired or exchanged free of charge. Damages, as follows, are not covered under warranty. 1. Material
deterioration caused by age. 2. Damage caused by modifications or rough handling. 3. Damage caused by improper use not following the instruction manual. 4. Damage caused
by unexpected accidents. 5. Damage not caused by defects in the manufacturing process. 6. Damage caused by dust or rust. 7. Damage or defects caused when dismantling
the product. 8. Damage and defects caused by dropping or other shocks to the product. 9. Deterioration or failure of parts due to friction. 10. Damage caused by the use of the
product in combination with other maker’s products.
Warranty
For repairs, please contact the retailer where you purchased the product or Snow Peak user service. When you ask for repair, please make sure that the product is
dry and clean. Please attach a memo or some kind of tag indicating the needed repair, and please write details of when and how the damage occurred. Shipping
cost and repair fee for the repair as follows. 1. Within warranty: Return shipping cost and repair fee will be covered by Snow Peak / 2. Outside warranty: Return shipping
cost and repair fee will be covered by the user.
Regarding Repair
How to store
After the fire is completely extinguished, and the product is completely cool, remove the product
from the fireplace and set it on the ground.
* Note: Even if the outside of the product is cool, the inside may still be hot. Please use caution.
Use the reverse procedure to disconnect the joints.
Close each main unit and store it in the attached carrying case or the Floga Storage Case (UG-524),
sold separately.
How to use
Instruction Manual
(This Manual)
Main Unit X 2 Carry Case
Hook Joint
Tab
Slot
After setting up the Pack & Carry
Fireplace L, open the main unit (x 2)
90 ° and place it on the ground.
* Please make sure the logo is facing
outwards
* When using the Fireplace Cast Iron
Coal Bed L (ST-032S), insert it into
the Pack & Carry Fireplace L before
installing the product.
Logo
Slot Hook Joint
Tab
Fireplace
Holes
Firewood
With the body unit on the ground, lift
the Hook Joint slightly and insert
the Hook Joint into the Slot. (2
locations)
* Please do not lift the product up in
the air while you operate above as it
may cause injury or damage the
product.
Install the connected main unit on the Pack &
Carry Fireplace L.
* When lifting the body, be sure to use both
hands and pick up the unit holding opposite
sides.
* Please check to ensure the
tabs of the main unit are
inside the fireplace.
Place firewood in the fireplace in the
shape shown above, then ignite using a
lighter or a gas torch. If you use
softwood, it will catch fire easily.
Be sure to keep the stack of firewood
below the holes inside the main unit.
If the firewood is stacked higher than the
holes, it will continue to generate smoke.
*Please note, until the main unit is
warm enough, smoke and odor will
be generated.
WARNING: Please be careful not to
stack the firewood too high as it may
cause an unexpected accident or injury.
/
