Nebula D2150 ユーザーマニュアル

User Manual

Nebula Cosmos Max

01 English

21 Deutsch

37 Español

53 Français

70 Italiano

87 Nederlands

104 Português

121 日本語

137 한국어

153 

EN

01

Table of Contents

Safety Instructions 02

What’s Included 04

Overview 04

Getting Started 06

Nebula App 09

Settings 10

Using Nebula Cosmos Max 12

Specifications 15

Troubleshooting 17

Notice 17

Trademarks 19

Warranty 19

EN

02

Safety Instructions

Read all instructions before you use this device. Do not make any changes or create

settings that are not described in this manual. If physical injury, loss of data or damage

is caused by failure to follow instructions, the warranty does not apply.

Setup

• To reduce the risk of fire and / or electric shock, do not expose the device to rain

or moisture. Objects filled with liquids, such as vases, should not be placed on this

device.

• Do not place this device on soft surfaces such as tablecloths or carpets, otherwise

the device could be a fire hazard.

• Do not place this device in areas susceptible to excessive dust and dirt or near any

appliance generating a strong magnetic field.

• To prevent overheating, do not block or clog the ventilation openings.

• Never place this device in a confined space. Always leave enough space around

this device for ventilation.

• Protect this device from overexposure to direct sunlight, heat, large temperature

fluctuations and moisture. Avoid extreme temperatures. The suitable operations

and storage temperature for this device and its accessories is 0°F to 95°F/ 0°C to

35°C.

• When this device is running for a long period of time, the surface may become hot.

Shut it down immediately and unplug the charger. Resume operation after this

device has cooled down.

• Always handle this device with care. Avoid touching the lens. Do not allow children

to handle the device without supervision.

• Never place heavy or sharp objects on this device.

• To avoid electric shock, do not disassemble.

• Use attachments or accessories specified by the manufacturer only.

• Avoid extreme vibrations as they may damage the internal components.

• Possibly hazardous optical radiation emitted from this product, do not stare at

operating lamp. Maybe harmful to the eyes.

Power Supply

• Use only the provided power adapter.

• Power off the device before removing the power supply from the socket.

• Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from this device.

• Unplug this device if there are lightning storms or when unused for a long period of time.

EN

03

• Before you make or change any connections, ensure that all devices are

disconnected from the power outlet.

• Never touch the power cable or the power connector with wet hands.

Hearing Safety

• To prevent hearing damage, do not listen for extended periods at high volume. Set

the volume to a safe level.

Charging

• The charger type is an HKA18019095-6C with output voltage / current of DC

19V/9.47A. The charger should be installed near this product and should be easily

accessible.

• This charger is for indoor use only.

• When charging, place this device in an environment that has a normal room

temperature (ranges from 5°C to 25°C/ 41°F to 77°F recommended) and good

ventilation.

• Due to the enclosure material used, this device must only be connected to a USB

interface of version 2.0 or higher.

Cleaning

• Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleansers

to clean.

• Do not use any liquid cleaning agents to clean the lens to avoid damaging the

coating film on the lens.

• Use lens cleaning paper to clean the lens.

Repairs

• Do not make any repairs to this device yourself. Only have your device repaired by

an authorized service center.

• Improper maintenance can result in injuries or damage to this device.

• Refer all servicing to qualified service personnel.

Caution

• Possibly hazardous optical radiation emitted from this product, do not stare at

operating lamp. Maybe harmful to the eyes.

EN

04

What’s Included

Cosmos Adapter Remote

Control

2 × AAA

Batteries

Quick Start

Guide

Overview

1. Front View

12 3

2. Rear View

1

2 3 4 5

Camera for Autofocus

Lens

Speaker

Power Button

• Press to power on

• Press and hold to power off

DC Input

HDMI Input Port

• Connect to a playback device

USB-A Port

• Connect to a USB flash drive

Optical Audio Port

• Connect to an audio device using an

optical cable

EN

05

3. Bottom View

1

Max

4. Remote Control

1

2

3

4

5

6

7

8

9

5. LED Indicator

LED Status Description

Solid red Operating in projector mode

Adjust Focus

Navigation

Back

Power On / Off

Press to activate Google

Assistant

Confirm the selected content

Home

System Settings

Volume Up / Down

Tripod socket

Remote Control: Nebula RC

Model: D0413

EN

06

Getting Started

1. Placement

Place this device on a stable, flat surface, and squarely point it to face the projection

surface. For best results, the projection surface should be white and flat. The distance

between this device and the projection surface must be a minimum of 31 inches (0.8

meters) and a maximum of 157 inches (3.98 meters) to get a projection image from 30

to 150 inches.

31-125 inches

T

• It is unnecessary to tilt it towards the projection surface. You can

correct the projection image with the built-in keystone correction.

• The distance between the device and the projection surface

determines the projection image size. For the best result, set the

projector between 63 and 104 inches away.

• You can also mount your projector on the ceiling.

2. Prepare the Remote Control

The remote control comes with two AAA batteries.

①For first-time use, slide to open the battery compartment, and install two AAA

batteries.

EN

07

② To replace the battery, unlock and open the battery compartment, insert a new

battery matching the polarity (+/-) as indicated, and then close and lock the battery

compartment.

+

3. Get Started

① Connect Nebula Cosmos Max to a power outlet using the provided power adapter.

EN

08

② Press to turn on the projector.

③ Angle the device towards a suitable projection surface or wall.The built-in autofocus

automatically adjusts the protector's image focus. Or you can press on the remote

control to manually adjust the focus.

④ When using for the first time, follow the on-screen instructions to complete the

basic set-up.

EN

09

Nebula App

To easily control this device, we recommend downloading When using for the first

time,When using for the first time,

① Download the Nebula Connect app from the App Store (iOS devices) or Google Play

(Android devices).

Nebula Connect

② Enable Bluetooth on your smartphone and select [Nebula Cosmos Max ] as the

device to be connected.

③ Open the Nebula Connect app and follow the on-screen instructions to complete

the connection setup.

Powering Nebula Cosmos Max with Android TV™

Follow the on-screen instructions to complete the setup process.

Option 1. Quick setup

Android phone users can follow the instructions to quickly set up Android TVTM with

your Android phone.

Option 2. Set up Nebula Cosmos Max

For iOS users, follow the instructions to complete the process.

① Skip the quick setup process.

② Connect Nebula Cosmos Max to the network.

③ Sign in with your Google account.

Your Nebula Cosmos Max will be powered by Android TVTM after finishing the setup

process.

EN

10

Settings

Go through the setup process when you turn on Nebula Cosmos Max for the first time.

1. Network

This device can be connected to the Internet via a wireless (Wi-Fi) connection.

① On the home page, select > [Network & Internet] and press .

② Follow the on-screen instructions to complete the network connection.

2. Audio

Audio format can be changed via the Audio Settings.

① On the home page, select > [Audio Settings] and and press .

Auto change digital audio format

Enable or disable automatic digital audio format

change between PCM and RAW

3. HDMI

Choose HDMI 1/2 as the input source. You can also change CEC settings under this

option.

① On the home page, select > [HDMI] and and press .

CEC Settings

Press Enter to change CEC settings

4. Projector

① On the home page, select > [Projector Settings] and press .

[Picture Settings]

Adjust the brightness from 0 to 100%

[Color Temperature] [

Normal] / [Cool] / [Warm]

[Wall Color]

[White] / [Red] / [Orange] / [Blue] / [Green] / [Cyan] / [Yellow]

/ [Purple]

[Correction correction]

Enable / disable keystone correction.

[Zoom]

[50-100%]

[Autofocus Correction]

Press Enter to Autofocus Correction.

EN

11

[Projector Mode]

[Auto]: Automatically detects whether the projector is inverted.

Automatically switch between these options.

[Front Projection]:

The projector is located in front of the

projection surface.

[Rear Projection]

: The projector is located behind the

projection surface.

[Inverted Front Projection]:

The projector is hanging from

the ceiling in an upside down position. The image is

rotated by 180 degrees.

[Inverted Rear Projection]:

The projector is hanging

from the ceiling in an upside down position behind the

projection surface. The image is rotated by 180 degrees

and horizontally mirrored.

[Picture Settings]

[Picture Mode]

[Standard] / [Movie] / [Office]

Note: When selecting a different mode, color brightness,

contrast and advanced color settings differ.

[Brightness]

Adjust color brightness between 0 and 100%

[Contrast]

Adjust color contrast between 0 and 100%

Advanced Settings

Adjust color Saturation, Hue, Gain and Gamma

Back to Default

Press Enter to back to the default setting

5. Apps

① On the home page, select > [Apps], and press .

② Select an app and check the current version, open or force stop, check the storage

used, clear data or cache, or enable or disable notifications and permissions.

6. Others

On the home page, select to find more setting options.

[Device Preferences]

[About] Check the device information and firmware update.

[Date & time] Manually set the date and time.

EN

12

[Language] Select the on-screen language.

[Keyboard] Select the keyboard language type.

[Sound] Select the audio output source and sound format.

[Storage] Check the device storage and removable storage.

[Reset] All data from your device’s internal storage will be erased.

[Date & Time]

[Automatic date & time] Enable or disable automatic date and time.

[Set date] Manually set date.

[Set time] Manually set time.

[Set time zone] Set a time zone.

[Use 24-hour format] Enable or disable 24-hour format.

EN

13

Using Nebula Cosmos Max

1. Play from HDMI Playback Devices

Nebula Cosmos Max can be connected to various HDMI playback devices such as

a TV box, TV stick, DVD player, set-top box (STB), gaming consoles or other devices.

Two HDMI devices can be connected to the projector simultaneously to stream video at

4K@60 fps.

To play from HDMI playback devices:

① Connect Nebula Cosmos Max to an HDMI playback device with an HDMI cable (not

included).

• It will automatically start HDMI playback once connected to an HDMI playback

device.

EN

14

2. Play from a USB Drive

With Nebula Cosmos Max , you can enjoy music, video, and pictures that are stored on

a USB drive.

To play from a USB drive:

① Download the ES File Explorer from Google Play.

② Insert a USB drive into the USB port.

• The USB folder will appear on the ES File Explorer.

③ Select videos or photos from the USB drive that you want to play, and press .

④ Press to stop playback.

3. Connect Bluetooth Accessories

You can connect Bluetooth devices to Nebula Cosmos Max .

① On the home page, select > [Remotes & Accessories] and press .

② Select Add accessories.

• This projector will begin searching for accessories.

③ Pair your projector with the device to be connected.

④ Follow the on-screen instructions to complete the Bluetooth connection.

Note: Before pairing your Bluetooth devices, make sure the remote control and your

projector are in pairing mode.

EN

15

4. Use Chromecast Built-in

You can wirelessly cast photos, videos, and music from your phone or computer right

to your Nebula Cosmos Max .

① Play a video clip on your phone and then tap the cast icon on the video screen.

② Select the device “D2150” you want to cast to.

• This projector will mirror the screen of the connected phone or computer.

T

• Make sure Nebula Cosmos Max and your phone are connected to the

same wireless network.

• Certain content may be unavailable to be casted due to copyright

restrictions. In this case, you can stream the content via the same app

installed in your Nebula Cosmos Max .

5. Enjoy Google Features

Nebula Cosmos Max also supports Google features. Once connected to a wireless

network, you can access online services, enjoy movies, music and pictures, and browse

online. Aside from the pre-installed apps, you can also install any other apps from

Google Play, and talk to the Google Assistant to do certain tasks.

To talk to the Google Assistant:

① Make sure you’ve followed the steps in the section “Connect Bluetooth Accessories”

to connect your remote control to Nebula Cosmos Max . Once connected, the LED

indicator on the remote control turns solid red.

② Press on the remote control to talk to the Google Assistant.

EN

16

Specifications

Specifications and design are subject to change without notice.

Power supply: 19V 9.47A

Power consumption: < 180W

Standby power consumption: < 0.5W

Display technology: UHD 3840 × 2160p DLP

Light source: RGB LED

Projection image size: 30-150 inch

Contrast ratio: 1000:1

Throw ratio: 1.2

Throw distance: 0.8m to 3.98m

CPU: Quad-core ARM Cortex-A55

OS: Android TV 9.0

RAM: 2GB DDR

ROM: 16GB eMMC

Speaker drivers: 10W × 4

Wi-Fi: IEEE802.11a/b/g/n/ac Dual Frequency 2.4G/5G

Bluetooth version: V4.2

USB file system: FAT32 / NTFS / exFAT

Recommended ambient: 41°F to 95°F / 5°C to 35°C

Relative humidity: 15% ~ 85% (non-condensing)

Storage temperature and humidity: < 149°F / 65°C, < 90% humidity

Dimensions (H*D): 350 × 250 × 100 mm / 13.8 × 9.8 × 3.9 inch

Weight: 3.3 kg / 118.2 oz

EN

17

Troubleshooting

① Fail to turn on the projector with the remote control?

• Press on the projector to turn it on.

• When powered off, you cannot use the remote control to turn it on.

② The remote control doesn’t work?

• Make sure the battery is already installed in the remote control.

• Replace the batteries.

③ Blurred image?

• Press to manually adjust the focus.

④ Cannot connect to a Wi-Fi network?

• Refresh the list of available networks and retry.

• Reboot the wireless router or the device and retry.

⑤ How do I update the firmware?

• When a new version is detected you will be asked to reboot and update.

EN

18

Notice

This product complies with the radio interference requirements of the European

Community.

Declaration of Conformity

Hereby, Anker Innovations Limited. declares that this device is in compliance with the

essential requirements and other relevant provisions of Directive 2014/53/EU. For the

Declaration of Conformity, visit the Web site www.SeeNebula.com

RF exposure information (for D2150): The Maximum Permissible Exposure (MPE)

level has been calculated based on a distance of d=20 cm between the device and the

human body. To maintain compliance with RF exposure requirements, use products that

maintain a 20cm distance between the device and human body.

Wifi Operating Frequency Range (for D2150):2412~2472 MHz(2.4G); 5150~5250 MHz,

5725~5850 MHz (5G)

Wifi Max Output Power (for D2150) :19.35 dBm(ERIP for 2.4G);22.09 dBm(ERIP for 5G)

BT Operating Frequency Range (for D2150) : 2402~2480 MHz; BT Max Output Power (for

D2150):9.2 dB(ERIP)

5150~5250 MHz can be used indoors only.

RF warning statement for D0413:

The device has been evaluated to meet general RF exposure requirement. The device

can be used in portable exposure condition without restriction.

Bluetooth Operating Frequency Range(for D0413) 2402~2480MHz; Bluetooth Max

Output Power(for D0413):4.346dBm(EIRP)

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3-5, 80807 Munich,

Germany

Anker Technology (UK) Ltd,Suite B I Fairgate House, 205 Kings Road, Tyseley,

Birmingham, B11 2AA, United Kingdom

Your product is designed and manufactured with high quality materials and

components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste,

and should be delivered to an appropriate collection facility for recycling.

Proper disposal and recycling helps protect natural resources, human health

and the environment. For more information on disposal and recycling of this

product, contact your local municipality, disposal service, or the shop where

you bought this product.

ページを読み込んでいます...

Nebula D2150 ユーザーマニュアル

その他の書類