TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 1 -
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
TPD-432F-H
Quick Start Version 1.1
1 Shipping package
Thanks for buying ICPDAS TPD-432F-H device. This shipping package contains the following
items:
TPD-432F-H x1 Quick Start x1
2 Appearance
Front View Rear View
4.3” TFT LCD with Touch Panel
LED Indicator
Buzzer
Reset Button
Serial Port
USB
Rotary Switch
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 2 -
3 Pin Assignment
On the back of the TouchPAD:
The pin assignments:
Pin
Description
F.G.
Frame Ground. F.G. is connected to the inside EMI or ESD suppression circuits.
Make sure that F.G. is connected to the Earth
VDC
DC input Voltage (range: +12 V ~ +48 V)
GND
Connected to the power supply’s ground pin
D1+
The positive data line of the RS-485 network
D1-
The negative data line of the RS-485 network
GND
Ground pin
D2+
The positive data line of the RS-485 network
D2-
The negative data line of the RS-485 network
The definition of the rotary switch:
No
Mode
Description
0
Run Only
Run the program.
9
USB Force Update
Update a new application to the TouchPAD device
through USB.
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 3 -
4 First Use of the TPD-432F-H
1. Connect wires as the figure. And set the rotary
switch to zero (At this point, the power is not yet
supplied).
2. Supply power to the TPD-432F-H, wait for several
seconds and then you can see the default
program run on it.
3. Try to touch on the icons on the screen of the
TPD-432F-H and you can find that TPD-432F-H
switches to another page.
5 Creating First Project
To create your first project of the TPD-432F-H, install the free development tool, HMIWorks
and then refer to <<TouchPAD_programming _guide.pdf>>, which can be found on the web:
http://ftp.icpdas.com/pub/cd/touchpad/document/english/programming_guide/
Use a flat-head screwdriver to
set rotary switch
External Power
GND
VDC (+12 ~ +48V)
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 4 -
6 Hardware Installation
7 Related Information
TPD-432F-H Product Page:
http://www.icpdas.com/root/product/solutions/hmi_touch_monitor/touchpad/tpd-43xf-h.html
Documents, such as the user manuals, the API references, etc.:
ftp://ftp.icpdas.com/pub/cd/touchpad/document/english/
Free Development Software, HMIWorks v2.10.24 or above:
ftp://ftp.icpdas.com/pub/cd/touchpad/setup/
If you have any questions, please feel free to contact us via email at:
service@icpdas.com, ser[email protected]
TPD-432F-H with External Wall Box,
EWB-T43F (optional)
TPD-432F-H with Outlet Box,
OB140F (optional)
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 5 -
TPD-432F-H
快速入門指南 版本 1.1
1 檢查配件
感謝您購買泓格的 TPD-432F-H 產品。產品包裝內應包含下列配件:
TPD-432F-H x1 快速入門指南 x1
2 外觀
前配置圖 後配置圖
4.3 吋觸控液晶螢幕
LED 指示燈
蜂鳴器
重啟按鈕
序列埠
USB
旋轉開關
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 6 -
3 腳位定義
在 TouchPAD 的背面可見到如下圖樣:
腳位定義:
Pin
說明
F.G.
機架接地，F.G. (連接到內部的 EMI 或 ESD 保護電路)，請接到大地。
VDC
直流電壓輸入 (範圍：+12 V ~ +48 V)
GND
連到電源的接地端
D1+
RS-485 網路的正訊號線
D1-
RS-485 網路的負訊號線
GND
接地端
D2+
RS-485 網路的正訊號線
D2-
RS-485 網路的負訊號線
旋轉開關 (Rotary Switch) 的配置模式定義:
項次
模式
說明
0
Run Only
執行程式。
9
USB Force Update
透過 USB 更新程式。
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 7 -
4 第一次使用 TPD-432F-H
1. 如左圖所示，將電源和接地線連接完成。然後將
旋轉開關(Rotary Switch)轉到 0(此時尚未供電)。
2. 開始供電給 TPD-432F-H，等待約數秒的開機時
間，接著可以看到 TPD-432F-H 執行出貨預附的
程式如圖所示。
3. 試著按一下 TPD-432F-H 螢幕上面的圖示，
TPD-432F-H 會切到其他的頁面。
5 建立第一個軟體專案
在建立 TPD-432F-H 的第一個專案之前，請先安裝免費的開發軟體 HMIWorks。然後參考
<< TouchPAD_programming _guide.pdf>>這份文件，一步一步地完成。該份文件可以
在 web 上找到：
http://ftp.icpdas.com/pub/cd/touchpad/document/chinese/programming_guide/
使用一字起子來配
置旋轉開關
外部供電器
GND
VDC (+12 ~ +48V)
TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 8 -
6 硬體安裝
7 參考資訊
TPD-432F-H 產品網頁:
http://www.icpdas.com/root/product/solutions/hmi_touch_monitor/touchpad/tpd-43xf-h_tc.html
相關文件，如使用手冊、API 函數手冊…等:
ftp://ftp.icpdas.com/pub/cd/touchpad/document/english/
免費開發軟體，HMIWorks 版本 2.10.24 或以上版本:
ftp://ftp.icpdas.com/pub/cd/touchpad/setup/
如有任何問題歡迎聯繫我們，我們將會為您提供完善的咨詢服務:
E-mail: service@icpdas.com, serv[email protected]om
TPD-432F-H 安裝於專用
明盒 EWB-T43F(選購)
TPD-432F-H 安裝於專用
暗盒 OB140F (選購)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
