Specifications /
●Contents: Solid Stake in Chrome #20 (10pcs) ●Materials: S55C Steel, chrome plating
●Size: L 8” Head 0.6” ●Weight: 2.8 oz / 80g (×10pcs)
R-122-2-C
65th Anniversary Solid Stake in Chrome #20 10pcs /
The stake is made of forged steel
55C. The head is designed for easy
striking without the hammer slipping.
Each stake is equipped with a hole
so that you can tie pegs together
with a rope. Also, the stake can be
removed from the ground by
inserting another Solid Stake 20 into
the hole and pulling upwards.
Safety Precautions
Before use, please read thoroughly to ensure safety and avoid accidents.
WARNING / Misuse could result in serious injury or death.
●This product is a peg for tents and shelters only. Pay close attention to the
weather. If extreme weather is in the forecast, pack up camp and evacuate
to a safe place.
CAUTION / Misuse could result in injury to the user and/or
damage to property.
●Please note: The chrome coating on the surface may peel off and rust may
occur after repeated use. When rusting occurs, please reference the
maintenance instructions. ●Please make sure that the pegs are firmly driven
into the ground. If the pegs are not driven in properly, the performance will
not be fully demonstrated, and the pegs may come loose in a gust of wind.
Please reference "How to strike pegs" for the proper depth of the pegs. ●Do
not allow children to use this product. It may cause unexpected accidents. ●
When driving the peg into the ground with a hammer, be sure to drive the
head straight into the ground. Please note: due to the manufacturing
process, white or black spots may appear on the head’s surface.
Maintenance
How to hit the pegs
●After each use, wipe off the mud with a dry cloth and store in a well-ventilated
place after drying.
Warranty
Snow Peak has taken all possible measures to ensure every product is durable
and functions correctly. If you find any product defects, please contact the
retailer where you purchased the product or Snow Peak Customer Service. If
there are apparent defects in the product's manufacturing, the defective
product will be repaired or exchanged free of charge. In other cases, Snow
Peak will repair the product for an appropriate fee. The decision to repair or
replace the product will be at our discretion. Snow Peak will not repair the
product for any damage that occurred due to the following: 1.Material
deterioration caused by age. / 2.Damage caused by modifications or rough
handling. / 3.Damage caused by inappropriate use not mentioned in the
instruction manual. / 4.Damage caused by unexpected accidents. / 5. Any
damage other than defects in the manufacturing process. / 6.Damage caused
by dust or rust. / 7.Damage and defects caused by dismantling the product. /
8.Damage and defects caused by dropping, jolting or other shocks. / 9.
Deterioration or failure of parts due to friction. / 10. Damage caused by the use
of the product in combination with another manufacturer's products.
Rope
Tensioner
90°
Snow Peak USA, Inc. 404 NW 23rd Avenue, Portland, Oregon 97210, USA
Tel. +1 (503) 461-0781 / Instagram. @snowpeakusa
Email. [email protected] / www.snowpeak.com
0120-010-660
Email:[email protected] MADE IN JAPAN
Instruction Manual / : Ver 1.00
/
