Mosquito Pig Coil in Red
FES-087-RD
Instruction Manual : Ver 1.00
SpecificationsContents
●Materials: Body / Aluminum, Legs / Ears / Tail
Parts / Stainless Steel, Metal Hanger /
Stainless Steel, Strap / Cotton
●Size: 137×148×165(h)mm / 5.4”×5.8”×6.5”(h)
●Weight: 150g / 5.3 oz
Safety Precautions: Before use, please read thoroughly to ensure safety and avoid accidents.
Thank you for purchasing a Snow Peak product. This product is a mosquito coil holder. For safety, read the following instruction manual before use. Please keep it
safe for future reference. Finally, if you find anything that you do not understand in the description or any problems with the product, please stop use immediately and
contact the retailer or Snow Peak Customer Service.
CAUTION / Misuse could result in injury to the user and/or damage to property.
●This product is a mosquito coil holder. Please do not use it for anything other than mosquito coils. ●Do not put anything on top of this product. Be careful not to
get caught in objects when storing. ●Please do not put anything other than mosquito coils inside. ●Compatible size of spiral mosquito coils: Diameter
approximately: 11cm (4.3") and thickness approximately 3.5~4mm (0.14" ~0.16") (sold separately). Do not use any other sizes of mosquito coils. ●Be careful not to
let the burning part of the mosquito coil touch your body. ●Please handle it with care because the product may be dented if dropped. ●If you use this product in a
closed environment, such as indoors or in a tent, you may feel irritation in your eyes and throat. Please only use it in a well-ventilated area. ●Do not hang objects
on the pig's legs or ears. ●Please note that this product will gradually fade in direct sunlight due to the nature of its processing. ●Avoid direct sunlight during use
and storage. It is possible to delay fading.
WARNING / Misuse could result in serious injury or death.
●Before using the product, check each part for abnormalities. If there are abnormalities, take the product to the dealer or Snow Peak Customer Service for inspection
or repair. ●This product handles fire. Keep this product out of the reach of infants. Also, because of the small parts, there is a risk of injury and choking. ●After igniting
the mosquito coils, make sure that the flame is extinguished. If you use the product with a flame, it may cause a fire.●After use, make sure that the fire of the mosquito
coil is completely extinguished. Move and disassemble the product once it has cooled sufficiently. ●Please do not hang the product on flammable objects such as
tents and tarps. Only hang this product on stable, non-flammable structures. ●Do not shake or move this product while the mosquito coil is burning. Please keep the
product stationary when the coils are lit. ●When setting up and using this product, please choose a flat and stable place. Ensure the product does not tip over before
or during use. ●Those with allergies should be cautious when using this product. Please carefully read the instructions for the mosquito coils.
Instructions for Use
Mosquito coil holder
Instruction Manual
(This Manual)
●Please be careful when handling lit mosquito coils. Keep them away from flammable materials such as paper and vinyl. Careless handling may result in fire.
DANGER / Misuse could easily result in a serious accident or death.
Snow Peak has taken all possible measures to ensure every product is durable and functions correctly. If you find any product defects, please contact the retailer
where you purchased the product or Snow Peak Customer Service. If there are apparent defects in the product's manufacturing, the defective product will be repaired
or exchanged free of charge. In other cases, Snow Peak will repair the product for an appropriate fee. The decision to repair or replace the product will be at our
discretion. Snow Peak will not repair the product for any damage that occurred due to the following:1.Material deterioration caused by age. / 2.Damage caused by
modifications or rough handling. / 3.Damage caused by inappropriate use not mentioned in the instruction manual. / 4.Damage caused by unexpected accidents. / 5.
Any damage other than defects in the manufacturing process. / 6.Damage caused by dust or rust. / 7.Damage and defects caused by dismantling the product. /
8.Damage and defects caused by dropping, jolting or other shocks. / 9. Deterioration or failure of parts due to friction. / 10. Damage caused by the use of the product
in combination with another manufacturer's products.
Warranty
●If professional repairs are required, please contact the retailer where you purchased the product or Snow Peak Customer Service. ●When you request repairs,
please make sure that the product is dry and clean. ●Please attach a memo or a tag indicating the necessary repair and please write details of how and when the
damage occurred. ●Transportation and repair costs are determined as follows: 1. Within warranty: The transportation cost (both ways) and repair cost will be covered
by Snow Peak./ 2.Outside warranty: The transportation cost (both ways) and repair cost will be covered by the customer.
Repair
Maintenance
● Before using a product that has been in storage for a long time, check each part for abnormalities. If there are abnormalities, take the product to the retailer or contact
Snow Peak Customer Service for inspection or repair. ●When cleaning the main body, do not use hard materials, scrubbing brush, cleanser, or polishing powder. It
may cause damage. ●Store in a dry place. ●If it gets wet due to rain, wipe off the moisture with a soft cloth. ●After use, please wash the dirt on the inside with a sponge
using dishwashing detergent. If you hide the tar for a long time, it becomes difficult to take it off.
Snow Peak, Inc.
456, Nakanohara, Sanjo-Shi, Niigata 955-0147 Japan
Tel. +81 256-46-5858 / Fax. +81 256-46-5860
www.snowpeak.co.jp
Snow Peak USA, Inc.
404 NW 23rd Avenue, Portland, Oregon 97210, USA
Tel. +1 (503) 461-0781 / Instagram. @snowpeakusa
Email. info@snowpeak.com / www.snowpeak.com MADE IN JAPAN
Mesh Carry Case
Please hang the mosquito coils with the center of the vortex
between the metal hangers, as shown in the figure. Hang it so that
the end of the incense stick is on the bottom so it can be used
safely and easily ignited.
When lighting the coil, confirm that it is secured to the metal hanger,
lift up the metal hanger, and ignite the end of the incense stick with
a long-handled lighter. Please do not take your eyes off the product
while the mosquito coil is lit and smoke is coming out. Also, please
be careful not to let the lit coil touch the main body of the product.
The product may become hot and may cause burns.
After use, please make sure that the main body is cool and throw
away the remaining ash directly into the garbage bag from the
bottom of the product.
21
Metal hanger
Mosquito coil
[Enlarged view
of metal hanger]
Cross section
of mosquito coil
Clip
/
