Contents (Name of the Parts)
DANGER / Misuse could easily result in a serious accident or death.
Maintenance
●Before using a product that has been in storage for a long time, check each part for abnormalities. If
there are abnormalities, take the product to the retailer or contact Snow Peak Customer Service for
inspection or repair. ●When cleaning, do not use a scrubber or abrasive cleanser, as they may damage
the surface and cause rust. Do not use knives or other sharp metal tools to remove scorch marks on
surfaces. ●After washing, drain the water and dry it well.
Instructions for Use
Setsuen pot
FES-357
Instruction Manual : Ver 1.00
Specifications
●Materials: Pot, Lid, Inner Steaming Screen, Partition Plate /
Stainless Steel, Storage Case / Polyester
●Size:443×242×112(h)mm 17.4"×9.5"×4.4"(h)
●Weight: 2.6kg (Including storage case) 5.7lbs
●Full water capacity: 6.7L / 226.5 fl oz
●Recommended capacity: 4.6L / 155.5 fl oz
●When using this pot together with stoves or grills, please read the instruction manual of the other product carefully, check the compatible model, and handle it according to the precautions. Incorrect use
can lead to serious accidents such as fire or burns.
Thank you for purchasing a Snow Peak product. This product is a cooking pot. For safety, read the following instruction manual before use. Please keep it safe for future reference. Finally, if you find anything
that you do not understand in the description or any problems with the product, please stop use immediately and contact the retailer or Snow Peak Customer Service.
CAUTION / Misuse could result in injury to the user and/or damage to property.
●When using the product for the first time, wash it thoroughly with a mild detergent and a soft sponge,
as it may contain oil from the manufacturing process. Do not wash with a metal scouring brush or
detergent containing polishing powder. Doing so may damage the surface and cause rust. ●After use,
wash the product well and dry it in a well-ventilated place out of direct sunlight. ●When cooking,
choose a stable place and set this product securely on the burner. ●The Snow Peak burners/stoves
that are compatible with this product are Grill Burner, Double Burner Stove, and Takudo. Do not use
this product on a bonfire, as it will damage the product. ●Do not use in microwave ovens or ovens. ●
Do not use this product when completely full of water; this increases the risk of burns. ●Do not subject
the product to sudden shocks or sudden changes in temperature (such as pouring cold water on a hot
body), as this may damage the product. ●To prevent corrosion, do not leave food in the pot for a long
time. ●This product is a pot exclusively for simmering, steaming, and boiling. Do not use it for any other
cooking method. Doing so may cause heat deformation and damage to the product. ●Do not use the
lid of this product for cooking. If the lid is placed over direct heat, it will warp and deform. ●When using
or carrying this product, please be careful to avoid sudden impacts or dropping it. The impact may
deform the body of the product and cause the contents to leak. ●To ensure the longevity of this
product, please observe the following. ●Do not chop materials inside the product. Doing so may cause
scratches and rust. ●When using strong acidic materials such as vinegar or strong alkaline materials
such as konjac, wash with a neutral detergent immediately after use to avoid discoloration or rusting.
Also, prolonged use of weakly acidic or weakly alkaline materials may cause discoloration or rust as
well, so please wash with a neutral detergent immediately after use.
MADE IN CHINA
●If professional repairs are required, please contact the retailer where you purchased the product or Snow Peak Customer Service. ●When you request repairs, please make sure that the product is dry and
clean. ●Please attach a memo or a tag indicating the necessary repair and please write details of how and when the damage occurred. ●Transportation and repair costs are determined as follows: 1. Within
warranty: The transportation cost (both ways) and repair cost will be covered by Snow Peak./ 2.Outside warranty: The transportation cost (both ways) and repair cost will be covered by the customer.
Repair
Snow Peak has taken all possible measures to ensure every product is durable and functions correctly. If you find any product defects, please contact the retailer where you purchased the product or Snow Peak
Customer Service. If there are apparent defects in the product's manufacturing, the defective product will be repaired or exchanged free of charge. In other cases, Snow Peak will repair the product for an
appropriate fee. The decision to repair or replace the product will be at our discretion. Snow Peak will not repair the product for any damage that occurred due to the following:1.Material deterioration caused by
age. / 2.Damage caused by modifications or rough handling. / 3.Damage caused by inappropriate use not mentioned in the instruction manual. / 4.Damage caused by unexpected accidents. / 5. Any damage
other than defects in the manufacturing process. / 6.Damage caused by dust or rust. / 7.Damage and defects caused by dismantling the product. / 8.Damage and defects caused by dropping, jolting or other
shocks. / 9. Deterioration or failure of parts due to friction. / 10. Damage caused by the use of the product in combination with another manufacturer's products.
Warranty
Snow Peak, Inc.
456, Nakanohara, Sanjo-Shi, Niigata 955-0147 Japan
Tel. +81 256-46-5858 / Fax. +81 256-46-5860
www.snowpeak.co.jp
Snow Peak USA, Inc.
404 NW 23rd Avenue, Portland, Oregon 97210, USA
Tel. +1 (503) 461-0781 / Instagram. @snowpeakusa
Email. info@snowpeak.com / www.snowpeak.com
●Before using the product, check each part for abnormalities. If there are abnormalities, take the
product to the dealer or Snow Peak Customer Service for inspection or repair. ●Do not use the product
without water. Using the pot without water may cause fire, burns, or damage to the product. ●Please
be careful not to burn yourself, as the pot will become extremely hot during use. After heating, please
cool the product for a while before handling it. ●The body, partition plate, and inner steaming screen
are all made of metal. The product may become hot during or after use. To avoid burns, never touch
the product with your bare hands. Always wear hand protection like the Fireside Gloves. ●When using
with a gas stove or burner, place the pot in the center of the trivet and adjust the heat so that the flame
does not become larger than the bottom of the product. If the product is used with the flame protruding
from the bottom, the handle may become hot and burn. Also, when using two or more stoves or
burners, please be careful not to let the adjacent flame touch the main body. ●When using a Si sensor
stove (gas stove with temperature sensor), please follow the following precautions as there is a risk of
scalding or fire due to the pot falling over. ●Place the main body in the center of the stove, and make
sure that the temperature sensor has sunk completely. ●Do not use if the product does not stabilize or
the Si sensor does not sink due to the type of Si sensor or the shape of the trivet. ●When reheating or
heating certain foods, such as miso soup, the contents of the pot may spurt out due to sudden boiling,
or the pot may topple over in some cases. Please observe the following precautions. ●When reheating
food, please stir well before heating. ●Do not heat over high heat. ●Please stir food or soup well when
cooking. ●Do not allow children to use this product. It may cause unexpected accidents.
WARNING / Misuse could result in serious injury or death.
CAUTION / Misuse could result in injury to the user and/or damage to property.
●When steaming, check frequently to make sure that water does not run out in the dents, and be
careful not to let it become empty inside.
Safety Precautions: Before use, please read thoroughly to ensure safety and avoid accidents.
Instruction manual
(this document)
How to use the partition plates
Please combine the two partition plates so that they intersect at the center. (Figure 1)
How to use the Inner Steaming Screen
Set the Inner Steaming Screen in the pot.
Next, please place the leg of the Inner Steaming Screen in the gap of the convex part on the bottom
of the pot. (Figure 3)
Fill the Inner Steaming Screen with enough water to fill the legs at least halfway. (Figure 4 Gray
Section)
Please place the legs of the partition plates in the gap of the convex part on the bottom of the pot.
(Figure 2)
LidPot Partition Plate Inner Steaming Screen
(Figure 1)
(Figure 2)
(Figure 4)
(Figure 3)
Storage Case
/
