WIKA CPP1000-H tag:model:CPP700-H 取扱説明書

ブランド: WIKA

モデル: CPP1000-H tag:model:CPP700-H

タイプ: 取扱説明書

Operating Instructions

操作说明书

CPP 700-H

CPP 1000-H

Hand test

CPP 1000-H

手持式试压泵 CN

CPP 1000-H型手持式试压泵

BG pmup tset dnaH

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

Information

This symbol provides you with information, notes and tips.

Warning!

This symbol warns you against actions that can cause injury to people or

damage to the instrument.

Operating Instructions Hand Test Pump Page 4 - 11 GB

手持式试压泵操作说明书页码12 - 22

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

1. General . ...................................................................................................................................... 4

1.1 General instructions . ..................................................................................................................... 4

1.2 Safety instructions . ..................................................................................................................... 5

2. Product description . ..................................................................................................................... 5

3. Mounting instructions . ..................................................................................................................... 6

4. Operation (pressure) . ..................................................................................................................... 7

5. Maintenance instructions . ............................................................................................................ 8

6. Cause of fault . ............................................................................................................................... 8

7. Specifications . ............................................................................................................................... 9

8. Order data / Accessories . ........................................................................................................... 10

9. Recommended reference instruments . .................................................................................... 11

10. Adresses

. .................................................................................................................................... 23

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

1. General .

1.1 General instructions .

In the following chapters detailed information on the CPP 700-H and CPP 1000-H hand test pump and

its proper use can be found.

Should you require further information, or should there be problems which are not dealt within detail in

the operating instructions, please contact the address below:

WIKA Alexander Wiegand SE & Co. KG

Alexander Wiegand Strasse

D-63911 Klingenberg

Tel: +49-(0)9372/132-473

Fax: +49-(0)9372/132-8767

E-Mail: [email protected]

The warranty period for the hand test pump is 24 months according to the general terms of supply of

ZVEI.

The guarantee is void if the appliance is put to improper use or if the operating instructions are not

observed or if an attempt is made to open the appliance or to release attachment parts.

We also point out that the content of these operating instructions neither forms part of an earlier or

existing agreement, assurance or legal relationship nor is meant to change these. All obligations of

WIKA Alexander Wiegand SE & Co. KG result from the respective sales contract and the general

business terms of WIKA Alexander Wiegand SE & Co. KG.

WIKA is a registered trade mark of WIKA Alexander Wiegand SE & Co. KG.

Names of companies or products mentioned in this handbook are registered trade marks of the

manufacturer.

The devices described in this manual represent the latest state of the art in terms of their design,

dimension and materials. We reserve the right to make changes to or replace materials without any

obligation to give immediate notification.

Duplication of this manual in whole or in part is prohibited.

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

1.2 Safety instructions .

Read these operating instructions carefully prior to operating the hydraulic

hand test pump CPP 700-H / CPP 1000-H. The pressure inside the pump can be

extremly high. Ensure that all pressure connections have been established

correctly.

2. Product description .

The CPP 700-H and CPP 1000-H hand test pumps are used to generate pressure for checking,

adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative

measurements. These pressure tests may be carried out in laboratories, workshops or on site at the

measuring point.

If the instrument to be tested and a sufficiently accurate reference measuring instrument are

connected up to the test pump, the same pressure is applied to the two measuring instruments when

the pump is operated. By comparing the two measure valves at random pressure values, the accuracy

can be verified or the instrument under test can be adjusted.

Despite their compact dimensions, the hand test pumps CPP 700-H and CPP 1000-H are easy to

operate and allow for exact generation of the required test pressures. The pumps are fitted with a fine

adjustment valve for the precise adjustment of pressures. The reference instrument is screwed directly

on the top of the pump and the unit under test is connected by means of the pressure hose

incorporating a 1/4" BSP female thread, contained in the scope of delivery.

(1) = Test hose, length 1 m

(2) = Pressure relief valve

(3) = Filling plug of liquid reservoir

(4) = Fine adjustment valve

(5) = Pressure port for reference

(6) = Liquid reservoir

(7) = Switching knob priming / high pressure

(8) = Handles

(9) = Blind plug - do not open!

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

3. Mounting instructions .

 The reference instrument is fitted to the upper side of the hand test pump CPP 700-H or

CPP 1000-H. The reference instrument is sealed by the integral O-ring sealing gasket. The

maximum torque is 15 Nm.

 The unit under test is mounted to the end of the flexible test hose. Tighten to the connector to

prevent any leaks to a maximum torque of 15 Nm.

Never apply external pressure to the CPP 700-H and CPP 1000-H. Do not

connect to external pressure sources.

 As an accessory, several stainless steel sets of adapters are available to cover different thread

dimensions of your test specimen.

 Tighten the optional adapters to a maximum torque of 15 Nm.

Tip: It is possible to connect the test specimen directly to the pump. After dismounting

of the hose connector, there is a 1/4" BSP female thread at the side of the pump body.

 Open the filling plug (3) of the liquid reservoir (6) and fill with a suitable fluid:

mineral oil based hydraulic fluid or clean water, free of calcium-carbonate / scale.

(Not suitable for hydraulic oils based on water and destilled water.)

 Fill the liquid reservoir (6) not completely full

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

4. Operation (pressure) .

 Make sure, the CPP 700-H or CPP 1000-H is in priming position. If necessary, press the switching

knob (7).

Switching knob (7)

handles in position - priming - - high pressure generation

 Make sure that the release valve (2) is open.

 Turn the adjustment valve (4) counter-clockwise fully out (smooth “stop” can be felt)

 Turn the release valve (2) clockwise until the vent is closed.

 Operate the handles (8) for priming, until the handles (8) are just before they cannot be pressed

fully together anymore, due to the generated priming pressure. Depending on the volume of the

calibration circuit, this can be at app. 200 to 400 bar / 3000 to 6000 psi.

 Keep the handles (8) pressed together and operate the switch knob (7). The handles (8) are now in

“high pressure” position.

NOTE: if the generated priming pressure is too high and - as a result - it is no longer

possible to press the handles (8) fully together, please open the release valve (2) (turn

counter-clockwise) and try it again.

 Operate the handles (8) until the required pressure is nearly achieved, but max. to app. 600 bar /

9000 psi. Higher pressure is made by turning the adjustment valve (4) clockwise.

NOTE: After increasing the pressure, the reading may slightly drop again for about 30

seconds, which is caused by thermodynamic effects, the tube connection and the

sealing gaskets. If the pressure drop does not come to a standstill, check the

measuring circuit for tightness.

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

 A pressure reduction is achieved by turning the fine adjustment valve (4) anticlockwise first and

then by carefully opening the relief valve (2).

NOTE: For releasing the pressure please turn the release valve (2) only max. 1

revolution counter-clockwise. Afterwards close it again by turning clockwise.

Remove the reference instrument or the test specimen only when the relief

valve (2) is open and no pressure is in the test pump any more.

5. Maintenance instructions .

Prior to connecting the reference instrument and the test specimen, the sealing gasket in the two

connectors should be checked for correct position and wear, and should be replaced, if and when

necessary.

A service kit consisting of spare sealing gaskets and o-rings, is available as an accessory.

It is only allowed to clean the liquid reservoir with water or mild detergents. By

the use of alcohol, ethyl alcohol (spirit), acetone or benzol crack formations can

arise in the material of the reservoir and the reservoir can be damaged.

6. Cause of fault .

 If the pressure cannot be generated correctly or if the set pressure does not stay stable, this is

likely to be caused by the incorrectly positioned or selected sealing gaskets. Please also check

wether any adapters used on the test specimen have been tightened sufficiently to eliminate leaks.

 Before assuming there is a leak in the hand test pump:

First of all, check if the relief valve (2) is closed.

 If the test pump has not been used for a longer period of time, the first lift may be somewhat

sluggish. This effect will disappear again during further operation.

 By no means apply any force to the operating elements of the hand test pump.

Never connect an external pressure supply system to the

CPP 700-H or CPP 1000-H hand test pump.

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

7. Specifications .

CPP 700-H CPP 1000-H

Pressure range bar 0 ... 700 0 … 1,000

psi 0 … 10,000 0 … 14,500

Medium Mineral oil based hydraulic fluid /

Mineral oil based hydraulic fluid /

clean water, free of calcium- clean water, free of calcium-

carbonate / scale

Pressure connections

- For reference instrument G 1/2“ female thread, rotating. G 1/2“ female thread, rotating.

This rotating nipple can be This rotating nipple can be

dismounted, then you get a dismounted, then you get a

G 3/8" female (fix) port. G 3/8" female (fix) port.

- For test specimen G 1/4“ female thread at the test

G 1/4“ female thread, rotating at

hose, length 1 meter,

the high pressure test hose,

system Minimess

1620

length 1 meter

Fine adjustment: Fine adjustment valve / Fine adjustment valve /

volume variator volume variator

Liquid reservoir cm³ 200 200

Material anodized aluminum, brass, anodized aluminum, brass,

stainless steel, plastic stainless steel, plastic

Sealing gaskets FKM and NBR (standard) FKM and NBR (standard)

Dimensions mm 280 (L) x 170 (W) x 120 (H) 280 (L) x 170 (W) x 120 (H)

Weight kg 1.9 1.9

Standard accessories test hose Minimess

, high pressure test hose,

length 1 meter length 1 meter

Other pressure transmitting media on request.

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

8. Order data / Accessories .

Order data hand test pump Order No.

Hand test pump CPP700-H, medium oil / clean water, free of calcium-carbonate / scale

incl. test hose Minimess

, length 1 m, and coupling 1/4" BSP female

13001981

Hand test pump CPP1000-H, medium oil / clean water, free of calcium-carbonate /

scale incl. high pressure test hose, length 1 m, with 1/4" BSP female thread, rotating

13001990

Order data accessories Order No.

Plastic case with foams for CPP700-H or CPP1000-H

dimensions in mm: (W/H/T) 440 x 370 x 140

13001965

Set of adapters and set of seals „BSP“ for test item connection G 1/4“ male on G 1/8“, G

3/8“ and G 1/2“ female

12139689

Set of adapters and set of seals „metric“ for test item connection G 1/4“ male on M 12 x

1.5, M 20 x 1.5 and Minimess

12140422

Set of adapters and set of seals „NPT“ for test item connection G 1/4“ male on 1/8“

NPT, 1/4“ NPT, 3/8“ NPT and 1/2“ NPT female

12139701

Connection adapter G 1/4“ male on G 1/2“ female, material: stainless steel 0168483

Operating fluid for CPP1000 and CPP1600 test pump series

in plastic bottle, content 1 litre

2099882

Service kit of sealing gaskets and O-rings

for hand test pump CPP700-H and CPP1000-H

13001442

Replacement hose for CPP700-H, length 1 m 13001434

Replacement hose for CPP1000-H, length 1 m 13001400

Hand test pump GB

CPP 700-H / CPP 1000-H

WIKA Operating Instructions Hand test pump Version 1.3

9. Recommended reference instruments .

 Precision Digital Pressure Gauge Model CPG 1000

Measuring range: up to 700 bar

Accuracy: 0.05 % of span

Specifications according data sheet CT 10.01

 Hand-Held Pressure Indicator Model CPH 6200

Measuring range: up to 1,000 bar

Accuracy: 0.2 % of span

Specifications according data sheet CT 11.01

 Hand-Held Pressure Indicator Model CPH 6400

Measuring range: up to 4,000 bar

Accuracy: 0.025 % of span or 0.1 % of reading

Specifications according data sheet CT 14.01

 ProcessCalibrator Model CPH 6000

Measuring range: up to 1,000 bar

Accuracy: 0.025 % of span

Specifications according data sheet CT 15.01

Calibration software:

 Calibration software EasyCal

For inspection equipment monitoring incl. generation

of calibration reports and archiving of calibration data

Specifications according data sheet CT 95.01

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

提示

…提供信息、备注和实用窍门。

警告！

…表示潜在危险情况，可能导致人身伤害或设备损坏。

1. 概述 .................................................................................................................................................. 14

1.1 简介 ................................................................................................................................................ 14

1.2 安全说明 ......................................................................................................................................... 15

2. 产品说明 ........................................................................................................................................... 15

3. 安装说明 ........................................................................................................................................... 16

4. 运行（压力）.................................................................................................................................... 17

5. 维护说明 ........................................................................................................................................... 18

6. 故障处理 ........................................................................................................................................... 18

7. 规格 .................................................................................................................................................. 19

8. 订购参数 / 附件................................................................................................................................. 20

9. 推荐参考仪表.................................................................................................................................... 21

10. 威卡 (WIKA) 全球 ........................................................................................................................... 23

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

1. 概述 .

1.1 简介 .

WIKA Alexander Wiegand SE & Co. KG

Alexander Wiegand Strasse

D-63911 Klingenberg

电话：+49-(0)9372/132-473

传真：+49-(0)9372/132-8767

电子邮件：[email protected]

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

以下各章节将对CPP 700-H和CPP 1000-H手持式试压泵以及如何正确使用它们进行详细说明。

如果需要更多信息，或遇到操作说明书中未提及的问题，请按照如下地址与我们联系：

根据ZVEI（德国电气与电子工业协会）的总体要求，该款手持式试压泵的质保期为24个月。

若设备使用不当、未遵守操作说明，或尝试打开设备或拆除附带零部件，则将不再享受质保服务。

需强调的是，这些操作说明的内容既不构成先前或现有协议、担保或法律关系的一部分，也不会对他们

产生影响。WIKA Alexander Wiegand SE & Co. KG的所有义务均遵从相应的销售合同和WIKA

Alexander Wiegand SE & Co. KG.公司的总体业务条件。

WIKA是WIKA Alexander Wiegand SE & Co. KG的注册商标。

该手册中提及的公司或产品名称均为制造商的注册商标。

该手册中所述的设备代表了在设计、尺寸和材料方面的最高水平。我们保留在随时修改或更换材料的权

利，恕不另行通知。

严禁对该手册整体或部分进行复制。

1.2 安全说明 .

2. 产品说明 .

(1) = 测试软管，1米长

(2) = 泄压阀

(3) = 集液器插塞

(4) = 微调阀

(5) = 用于连接参考仪表的压力接口

(6) = 集液器

(7) = 加压/高压切换旋钮

(8) = 手柄

(9) = 堵头 - 切勿打开！

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

在对手持式液压试压泵CPP 700-H/CPP 1000-H进行操作之前，请仔细阅读这些操作说

明。

泵内可能有非常高的压力，因此操作时需谨慎，并确保所有压力接头均正确连接。

在通过对比测量检查、调节和校验机械和电子压力测量仪表时，可使用CPP 700-H和CPP 1000-H手持

式试压泵生成所需的压力。这些压力测试可以在实验室、车间或者测量位置现场进行。

如果待测仪表和一个足够精确的参考测量仪表都连接到测试泵上，那么当泵运行时，就可以在两个测量

仪表上施加相同的压力。通过对随机压力值下的两个测量阀门进行对比，就能对精度进行验证，并对待

测仪表进行调节。

除了紧凑的外形尺寸外，CPP 700-H和CPP 1000-H手持式试压泵的操作很简单，并且可以精确产生所

需的测试压力。泵上配有一个微调阀，用于对压力进行精微调节。参考仪表通过螺纹直接连接在泵的顶

端，待测设备则是通过带有1/4" BSP内螺纹的压力管（随产品提供）进行连接。

前视图

后视图

3. 安装说明 .



 待测件应安装到柔性测试软管末端。连接时，请将接头上紧（最大扭矩为15 Nm），避免发生泄漏。



用户可以选择多种不锈钢适配器附件，以满足测试件不同螺纹尺寸的需求。



上紧选配适配器（最大扭矩为15 Nm）。



 不要将积液器 (6) 完全加满

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

参考仪表应安装到CPP 700-H或CPP 1000-H型手持式试压泵的上方，且应使用集成O型环密封垫圈

进行密封。最大扭矩为15 Nm。

切勿向CPP 700-H和CPP 1000-H施加外部压力。请勿将其连接到外部压力源上。

提示：可以直接将测试件连接到泵上。拆下软管接头后，在泵体侧面有一个1/4" BSP内

螺纹。

打开积液器 (6) 的堵头 (3) 并充入适当的液体：

矿物质油基液压油或纯净水（不含碳酸钙/水垢）。

（不适用于水和蒸馏水基液压油。）

4. 运行（压力） .



确保CPP 700-H或CPP 1000-H处于加压位置。如有必要请按下切换旋钮 (7)。

切换旋钮 (7)

手柄就位 - 加压- - 高压发生器-



确保泄压阀 (2) 打开。



 顺时针转动泄压阀 (2) 直到泄压按钮闭合为止。



手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

将调整阀 (4) 逆时针拧到头（会感到轻微的“停顿”）

使手柄 (8) 保持压合状态，并对切换旋钮 (7) 进行操作。手柄 (8) 此时位于“高压”位置。

操作手柄 (8) 进行加压，直到手柄因为所产生的加压压力而无法再完全压合为止。根据校验回路的体

积，此时的压力大约为200到400 bar/3000到6000 psi。

对手柄 (8) 进行操作，直到接近所需压力为止（最大压力约为600 bar/9000 psi）。通过顺时针转动调

节阀 (4) 可以达到更高的压力。

备注：如果所产生的加压压力过大，则无法再将手柄 (8) 完全压合。此时，请将泄压阀

(2) 打开（逆时针旋转）然后再试一次。

备注：在增大压力后，由于热力学效应、管接头和密封垫圈的影响，压力读数可能略有

下降（约30秒）。如果压力降没有达到稳定状态，请检查测量回路的气密性。

 先逆时针转动微调阀 (4)，然后小心打开泄压阀(2)，就可以减小压力。

5. 维护说明 .

6. 故障处理 .



 在怀疑手持式试压泵有泄漏之前：

先要检查泄压阀 (2) 是否关闭。



如果测试泵长期不用，那么在初次使用时很可能会反应迟钝。使用几次后这种现象就会消失。



切勿向手持式试压泵的工作元件上施加任何形式的力。

切勿向CPP 700-H或CPP 1000-H手持式试压泵上连接外部压力源。

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

备注：如需释放压力，请逆时针转动泄压阀 (2)（最多转动1圈）。之后再顺时针转动以

将其关闭。

只有在泄压阀 (2) 打开且测试泵内不再有压力时，才能拆除参考仪表或测试件。

只允许使用水或柔和的洗涤剂对积液器进行清洁。如果使用酒精、乙醇（酒精）、丙酮

或不纯苯进行清洁，则积液器材料上会出现龟裂并有可能导致积液器损坏。

在连接参考仪表和测试件之前，应检查两个接头中的密封垫圈是否正确就位且没有磨损，如有必要应将

其更换。

随校验仪提供有检修套件配件（包括备用密封垫圈和O型环）。

如果无法正确产生压力或设定压力无法稳定，则很有可能由于密封垫圈位置错误或选型不当造成。此

时，还应检查测试件上所使用的适配器是否足够上紧以排除泄漏风险。

7. 规格 .

CPP 700-H CPP 1000-H

压力范围 bar 0 ... 700 0 … 1.000

psi 0 … 10.000 0 … 14.500

介质矿物质油基液压油/ 矿物质油基液压油/

纯净水纯净水

（不含碳酸钙/水垢）

1）

（不含碳酸钙/水垢）

1）

压力接口

- 用于参考仪表 G 1/2“内螺纹，旋转式 G 1/2“内螺纹，旋转式

- 用于测试件

微调：微调阀/ 微调阀/

流量调节器流量调节器

积液器 cm³ 200 200

材料阳极电镀铝、黄铜、阳极电镀铝、黄铜、

不锈钢、塑料不锈钢、塑料

密封垫圈 FKM和NBR（标配） FKM和NBR（标配）

尺寸 mm 280 (长) x 170 (宽) x 120 (高) 280 (长) x 170 (宽) x 120 (高)

重量 kg 1,9 1,9

标准附件 Minimess

测试软管，高压测试软管

1米长 1米长

也可根据客户要求提供其他压力传送介质。

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

该旋转头是可拆卸的，拆卸后会

露出G 3/8"内螺纹（固定）端口

该旋转头是可拆卸的，拆卸后会露出

G 3/8"内螺纹（固定）端口

G 1/4“内螺纹，拧到Minimess

1620系列测试软管（1米长）上

G 1/4“内螺纹，拧在高压测试软管

（1米长）上

8. 订购参数 / 附件 .

手持式试压泵订购参数订购代码

13001981

13001990

附件订购参数订购代码

13001965

适配器和密封件套件，用于BSP测试件的G 1/4“外螺纹接头及G 1/8“、

G 3/8“和G 1/2“内螺纹接头

12139689

12140422

适配器和密封件套件，用于NPT测试件G 1/4“外螺纹接头及1/8“ NPT、

1/4“ NPT、3/8“ NPT和1/2“ NPT内螺纹接头

12139701

G 1/4“外螺纹接头和G 1/2“内螺纹接头适配器，材料：不锈钢 0168483

用于CPP 1000和CPP 1600试压泵系列的工作液体，

塑料瓶装（1升）

2099882

用于CPP700-H和CPP1000-H型手持式试压泵的密封垫圈和O型环检修套件 13001442

43410031用于CPP700-H的替换软管，1米长

用于CPP1000-H的替换软管，1米长 13001400

手持式试压泵

CPP 700-H/CPP 1000-H

威卡 (WIKA) 手持式试压泵操作说明书1.3版

CPP 1000-H型手持式试压泵，中油/纯净水，不含碳酸钙/水垢，

包括高压测试软管（1米长），带1/4" BSP内螺纹接头（旋转式）

CPP 700-H型手持式试压泵，中油/纯净水，不含碳酸钙/水垢，包括Minimess®

测试软管（1米长）和1/4" BSP内螺纹接头

适配器和密封件套件，用于公制测试件G 1/4“外螺纹接头及M 12 x 1.5、

M 20 x 1.5和 Minimess®

用于CPP 700-H或CPP 1000-H的塑料盒（带泡沫塑料），尺寸（W/H/T）：

440 x 370 x 140（单位为mm）

ページが読み込まれています...

WIKA CPP1000-H tag:model:CPP700-H 取扱説明書

ブランド: WIKA

モデル: CPP1000-H tag:model:CPP700-H

タイプ: 取扱説明書

PDFをダウンロードします

報告

他の言語で

English: WIKA CPP1000-H tag:model:CPP700-H Operating instructions

WIKA CPP1000-H tag:model:CPP700-H 取扱説明書

WIKA CPP1000-H tag:model:CPP700-H 取扱説明書

他の言語で

関連論文

その他のドキュメント