Korg KingKORG 取扱説明書

4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan

English

Contents

Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Sophisticated sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Intuitive operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Controllers and functions that support your playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Panel description and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front panel (Joystick/Audio/Tube/FX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Front panel (Main Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Front panel (Oscillator/Filter). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Front panel (AMP/LFO/EG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Rear panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Making connections and turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Turning the power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Auto power-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Playing the KingKORG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Listening to the demo songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Selecting and playing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Selecting a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Adding variety to the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Editing the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

How a program is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic program editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

About global settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Other functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Saving your settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Owner’s manual

4

KingKORG Owner’s manual

Thank you for purchasing the Korg KingKORG Synthesizer. To help you get the most out of your new

instrument, please read this manual carefully.

Precautions

Location

Using the unit in the following locations can result in a malfunction.

• In direct sunlight

• Locations of extreme temperature or humidity

• Excessively dusty or dirty locations

• Locations of excessive vibration

• Close to magnetic fields

Power supply

Please connect the designated AC adapter to an AC outlet of the correct

voltage. Do not connect it to an AC outlet of voltage other than that for

which your unit is intended.

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference.

Operate this unit at a suitable distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force to the switches or controls.

Care

If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use

liquid cleaners such as benzene or thinner, or cleaning compounds or

flammable polishes.

Keep this manual

After reading this manual, please keep it for later reference.

Keeping foreign matter out of your equipment

Never set any container with liquid in it near this equipment. If liquid gets

into the equipment, it could cause a breakdown, fire, or electrical shock.

Be careful not to let metal objects get into the equipment. If something does slip

into the equipment, unplug the AC adapter from the wall outlet. Then contact

your nearest Korg dealer or the store where the equipment was purchased.

DECLARATION OF CONFORMITY (for USA)

Responsible Party : KORG USA INC.

Address : 316 SOUTH SERVICE ROAD, MELVILLE, NY

Telephone : 1‐631‐390‐6500

Equipment Type : Synthesizer

Model : KingKORG

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

THE FCC REGULATION WARNING (for USA)

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

If items such as cables are included with this equipment, you must

use those included items.

Unauthorized changes or modification to this system can void the

user’s authority to operate this equipment.

Notice regarding disposal (EU only)

When this “crossed‐out wheeled bin” symbol is displayed on

the product, owner’s manual, battery, or battery package, it

signifies that when you wish to dispose of this product,

manual, package or battery you must do so in an approved

manner. Do not discard this product, manual, package or

battery along with ordinary household waste. Disposing in

the correct manner will prevent harm to human health and

potential damage to the environment. Since the correct method of

disposal will depend on the applicable laws and regulations in your

locality, please contact your local administrative body for details. If

the battery contains heavy metals in excess of the regulated amount, a

chemical symbol is displayed below the “crossed‐out wheeled bin”

symbol on the battery or battery package.

About data

The contents of memory can be lost due to an unexpected malfunction

caused by incorrect operation or some other reason. Be sure that you have

saved important data on other media. Please be aware that Korg will accept

no responsibility for any damages which may result from loss of data.

About the vacuum tube

The lifespan of a vacuum tube is not uniform. If the vacuum tube should

burn out, please contact a Korg service center.

All adjustments and servicing, including replacement of the vacuum tube,

must be performed by a professional.

About the owner’s manual

The documentation for this product consists of the following:

‐ Owner’s manual (what you’re reading)

‐ Parameter guide (you can download it from the Korg website).

http://www.korg.co.jp/English/Distributors/ or http://www.korg.com/

Owner’s manual

This provides a simple explanation of the KingKORG’s main

functionality. Read this first.

Parameter guide

This provides information about all of the KingKORG’s parameters.

Read this guide when you want to find out what specific parameters do.

The parameter guide is structured as follows.

‐ Parameter guide

‐ Effect guide

‐ MIDI guide

You can read the parameter guide on your computer.

Abbreviations for the manuals

OM: Owner’s Manual

PG: Parameter Guide

Display indications

The values of various parameters shown in the manual are only examples;

they might not match what you see on the KingKORG’s display.

Example of notation on the main display page

GLOBAL “g15: Power Off” page

In Global mode, the page name will be displayed on the top of the main

display.

* All product names and company names are the trademarks or regis‐

tered trademarks of their respective owners.

5

Main Features

Sophisticated sound

1. Synthesizer functionality with newly-developed

XMT modeling sound engine

XMT (eXpanded Modeling Technology) is proprietary Korg

technology that allows a wide range of sonic variation to be

created with simple operations. The KingKORG provides an

extremely diverse variety of oscillator algorithms, such as the

sawtooth and square waveforms typically found on an analog

synthesizer, but also including noise and PCM/DWGS.

2.A filter with personality

The filter is one of the most important elements that determine

the character of an analog synthesizer. The KingKORG provides

not only a high‐quality digital filter but also faithful modeling of

the analog filters found on classic synthesizers of the past,

allowing aggressive shaping of the sound.

3.Full-analog vacuum tube driver circuit

In a distillation of Korg’s years of experience and know‐how in

analog circuit design, a full‐analog vacuum tube driver is

provided as a mastering effect. It not only delivers warmth and

loudness, but also a powerful sense of drive.

4.Vocoder

The KingKORG features a vocoder function that can use your

voice input via a microphone to modify the sound of the

oscillator, producing an effect as though the synthesizer were

talking.

5.Virtual patching

Six sets of virtual patching allow control signals such as EG,

LFO, and joystick functions to be virtually connected to sound

parameters such as pitch or cutoff, letting you modulate the

parameters for even greater sound‐creating flexibility.

6.200 built-in programs

The KingKORG contains 200 programs organized into eight

categories such as synth, lead, and bass. You’ll be able to

immediately start playing a broad range of sounds. There’s also

a user area with 100 vacant spaces for you to store your own

original sounds.

Main Features

Intuitive operation

7. Front panel

You can edit sounds intuitively by directly using the knobs and

buttons that are organized into sections on the panel.

The display also provides edit pages that allow you to edit all of

the KingKORG’s parameters.

8.Favorites

There’s a Favorites function that lets you recall your favorite

programs at one touch. You can register a total of 40 programs

in the eight category/favorites buttons and recall them instantly.

Controllers and functions that

support your playing

9.Step arpeggiator

The step arpeggiator automatically generates an arpeggiated

phrase (broken chord) when you hold down a chord on the

keyboard. You can choose from six arpeggio types and specify

the duration and spacing of the notes. You can also turn each

step on/off to enjoy even more variety.

10.Joystick

The KingKORG provides the joystick that’s a favorite feature on

Korg music workstations. By moving the joystick up/down/left/

right you can freely control pitch bend and program parameters.

You can also connect a foot switch and play while holding the

joystick effect.

11.Librarian software

If you connect the KingKORG to your computer via USB, you’ll

be able to use librarian software to manage the KingKORG’s

programs on your computer. The library software can be

downloaded from the Korg website ( http://www.korg.co.jp/

English/Distributors/ or http://www.korg.com/ ) free of charge.

6

KingKORG Owner’s manual

Panel description and functions

Front panel (Joystick/Audio/Tube/FX)

VOLUME knob

This adjusts the volume of the AUDIO OUTPUT

jacks (L/MONO, R) and headphone jack.

MIC LEVEL PEAK LED

This will light up when the input signal from the

mic jack is distorting because of excessive level.

MIC LEVEL knob

This knob adjusts the input level from the mic

jack.

OCTAVE UP/DOWN buttons

These buons shi the pitch range that’s

assigned to the keyboard in one-octave

steps over a range of +/-2 octaves.

(OM: p.14 “Switching octaves”)

Joystick (JS)

The joystick controls pitch and the

depth of modulation (expression).

Moving the joystick in the le/right

direction will control pitch bend,

and moving it in the up/down

direction will control modulation.

You can assign separate types of

modulation to the upward and

downward directions.

Global Eﬀects

(GLOBAL FX)

Master eﬀects

(MASTER FX)

EQ controls

These adjust the high and low

frequency regions of the KingKORG’s

audio output.

HIGH knob

This knob adjusts the tone of the

high-frequency region. By operating

this knob while holding down the

SHIFT/EXIT buon, you can adjust

the HIGH cutoﬀ frequency.

LOW knob

This knob adjusts the tone of the

low-frequency region. By operating

this knob while holding down the

SHIFT/EXIT buon, you can adjust

the LOW cutoﬀ frequency.

TUBE controls

DRIVE knob

This adjusts the amount of drive of

the vacuum tube circuit.

BOOST button

This buon boosts the vacuum

tube distortion.

ON button

This turns the vacuum tube circuit

on/oﬀ.

TUBE (vacuum tube)

The vacuum tube may break if it is subject to physical shock.

If the vacuum tube breaks, be sure to have it replaced.

FX type select dials (with push

function)

These dials select the eﬀect types for

PRE FX, MOD FX, and REV/DELAY.

By pressing a dial you can switch the

timbre where the eﬀect will be

applied.

FX control knobs

These knobs adjust the PRE FX,

MOD FX, and REV/DELAY

parameters.

Headphone jack

Here you can connect a set of

headphones equipped with a

mini-plug. This jack will output the

same signals as the AUDIO OUTPUT

jacks (L/MONO, R). Use the VOLUME

knob to adjust the headphone volume.

Timbre LEDs

The LED of the timbre where you’re

applying an eﬀect will light up.

7

Panel description and functions

Front panel (Main Control)

Value dial (with push function)

Use this dial to edit program or parameter

values, or push the dial to execute seings.

Pages where the push function is available

will show a symbol in the main display.

PROGRAM (GLOBAL) button

This buon has two functions.

[PROGRAM]

When you want to play programs,

press this buon to select Program

mode. The buon will light, and the

program play screen will appear in

the main display.

[GLOBAL]

When you want to make overall

seings that apply to the entire

KingKORG, hold down the

SHIFT/EXIT buon and press this

buon to select Global mode. The

buon will blink, and the main

display will show the global seing

screen.

FAVORITES button

Use this buon to turn on the Favorites function that makes it easy to select

a sound, or to switch Favorite Sets.

Each time you press this buon, you’ll cycle through A



B



C



D



E



A….

By pressing this buon while holding down the SHIFT/EXIT buon, you can step

through the banks in the order of E D C B A E….

To turn oﬀ the Favorites function, press the PROGRAM (GLOBAL) buon.

SHIFT/EXIT button

Use this buon to access the extended

functions (SHIFT) of a knob or buon,

or to return to the program select screen

(EXIT).

WRITE button

Use this buon to save a program or

global seing that you’ve edited, or to

register a desired program as a Favorite.

(OM: p.21 “Saving”)

PAGE +/- buttons

Use these to access the desired edit page.

Use the +/- buons to move between

pages.

Main display

This shows various information such as

program data and parameter values.

Category/Favorites buttons

If the PROGRAM (GLOBAL) buon is lit

up, pressing one of these buons will jump

to the ﬁrst program in the corresponding

category. If the FAVORITES buon is lit

up, pressing one of these buons will

directly recall a program. You can register

your favorite programs so that they can be

recalled by a single press.

ORIGINAL VALUE LED

This will light up when the value you’re

editing with the front panel knobs and

buons matches the internally saved

value.

TIMBRE A/B select buttons

These buons select the timbre that will be

controlled by the front panel (OSCILLATOR

/FILTER, AMP/LFO/EG). By pressing both

A and B buons simultaneously, you can

select both timbres.

SPLIT (POSITION) button

Use this to turn the Split function on/oﬀ,

or to specify the split position.

The Split function will turn on/oﬀ each

time you press the buon. You’ll also use

this buon to specify the split position.

(PG: “1. Timbre parameters”)

TEMPO LED

This will blink in time with the tempo.

ARP (TEMPO) button

Use this buon to turn the

arpeggiator on/oﬀ, and to set the

tempo. A tap tempo function is also

provided. (OM: p.14 “3. Playing

arpeggios”)

8

KingKORG Owner’s manual

Front panel (Oscillator/Filter)

OSCILLATOR sub display

This shows information about the oscillator

that’s currently selected.

OSCILLATOR TYPE select dial

(with push function)

This selects the oscillator type. By pressing the

dial you can jump to the beginning of the

categories Oﬀ, ANALOG, DWGS, PCM, or

MIC IN.

OSCILLATOR select button

Use this to select the oscillator number that

you want to control. The LED of the currently

selected oscillator will light up.

PORTAMENTO button

This is an on/oﬀ buon for the portamento eﬀect, which

creates a smooth transition to a note of a diﬀerent pitch.

OSCILLATOR controls

These knobs edit the parameters of each oscillator.

TUNE (SEMI) knob

This adjusts the amount of detune relative to the basic

pitch. By holding down the SHIFT/EXIT buon and

turning this knob, you can make adjustments in semitone

steps.

CONTROL knob

This adjusts the oscillator’s CONTROL 1 parameter.

The parameter will depend on the oscillator type you’ve

selected. By holding down the SHIFT/EXIT buon and

turning this knob, you can adjust the CONTROL 2

parameter. (PG: “1. Timbre parameters”)

FILTER CUTOFF knob

This knob adjusts the ﬁlter cutoﬀ

frequency.

FILTER sub display

This shows information about the

ﬁlter that’s currently selected.

FILTER TYPE (-)-select button

This buon allows you to select the ﬁlter type.

By holding down the SHIFT/EXIT buon and

pressing this buon, you can step backward

through the choices (05



04



03



02



01...).

FILTER controls

These knobs edit the ﬁlter parameters.

RESONANCE knob

This adjusts the amount of ﬁlter resonance.

EG INT (KEY TRK) knob

This adjusts the depth that the EG will vary

the cutoﬀ frequency over time.

By holding down the SHIFT/EXIT buon

and turning this knob, you can adjust the

depth that the the cutoﬀ frequency will be

aﬀected by your keyboard playing position

(i.e., high to low notes).

PORTA. TIME knob

This adjusts the portament time.

9

Panel description and functions

Front panel (AMP/LFO/EG)

LFO controls

Use these to edit the LFO parameters.

FREQ knob

This knob adjusts the frequency of the LFO.

INTENSITY knob

This knob adjusts the depth to which the LFO will aﬀect

the ﬁlter or pitch.

EG select button

This selects the EG that will be

edited by the EG controls. The

LED of the currently selected

EG will light up.

The LED will blink in

synchronization with the EG’s eﬀect.

LFO select button

This buon selects the LFO that will be edited by the LFO

controls. The LED of the currently selected LFO will light

up. The LED will blink in time with the LFO frequency.

VOCODER button

This turns the vocoder on/oﬀ.

This turns the vocoder function

on/oﬀ. By pressing this buon while

holding down the SHIFT/EXIT

buon, you can turn Mic Thru on/oﬀ.

VELOCITY button

This turns on/oﬀ velocity sensitivity

for the EG, which allows the EG

seings to vary according to the

amount of force you use when

playing the keyboard.

EG controls

These adjust the EG parameters.

ATTACK knob

This adjusts the time from note-on (the

moment you play a key) until the aack

level (the maximum value of the envelope)

is reached.

DECAY knob

This adjusts the time from when the aack

level is reached until the sustain level is

reached.

SUSTAIN knob

This adjusts the level where the volume

will be held aer the decay time has elapsed.

RELEASE knob

This adjusts the amount of time from

note-oﬀ (the moment you release the key)

until the volume has completely decayed

to silence.

UNISON button

This turns the timbre’s Voice Unison

function on/oﬀ.

By pressing this buon while holding

down the SHIFT/EXIT buon, you can

jump to the unison voice seing screen.

AMP LEVEL knob

This adjusts the volume of the timbre.

10

KingKORG Owner’s manual

Rear panel

SWITCH/PEDAL jack

You can connect a pedal switch or foot

controller here.

MIDI IN/OUT connectors

These connectors allow

the KingKORG to exchange

MIDI messages with an

external MIDI device.

USB B connector

This connector allows the KingKORG

to exchange MIDI messages with your

computer.

CV/GATE OUT jack

This outputs a control voltage and gate.

By connecting this to an analog synthesizer

you can control it in various ways.

Mic jack

You can connect a mic here.

Vocoder-type programs use this mic

as the modulator audio.

DAMPER jack

You can connect a damper pedal here.

AUDIO OUTPUT jacks

You can connect powered monitors, a stereo

amp, mixer, or multi-track recorder to these

jacks. If you’ re using a monaural connection,

connect the L/MONO jack.

Power switch

This turns the power on/oﬀ.

DC12V jack

Connect the included AC adapter

here. Connect the AC adapter to the

KingKORG before you plug it into

an AC outlet.

Cable hook

To prevent the power cord from being

accidentally pulled out of the DC12V jack,

fasten the cable around this hook.

Note regarding power (the Auto Power-Off function)

This instrument is equipped with an auto power-oﬀ function.

The power will turn oﬀ automatically if a certain length of time

elapses without any user input. (With the factory seings, the

power will turn oﬀ when four hours have elapsed without any

user input.)

To disable this, change the seings of the GLOBAL g15: Power Oﬀ

page.

11

Making connections and turning on the power

Connections

The illustration below shows a typical example of connections for the KingKORG. Connect your equipment as appropriate for your needs.

Computer

MIDI keyboard, sound module,

rhythm machine, etc.

Monitor speakers (with internal amp) Mic

Damper pedalAnalog synthesizer compatible

with CV/GATE IN

Foot controller Pedal switch

to electrical

outlet

AC adaptor

(included)

DC12V

USB cable

MIDI OUTMIDI IN INPUT INPUT

CV/GATE cable (included)

MIDI cable

You must power‐off all your equipment before making connections. If you make connections while the power is on, you might damage

your speaker system or cause your equipment to malfunction or be damaged.

1. Connecting your monitor amp or

speakers

Connect the KingKORG’s AUDIO OUTPUT jacks to the input jacks

of your mixer or powered monitor speakers. If you make

connections in monaural, use the L/MONO jack.

TIP:

We recommend that you use the stereo outputs to take full

advantage of the KingKORG’s sound.

2. Connecting your mic

If you’ll be using the KingKORG as a vocoder, connect your mic to

the rear panel mic input so that the audio from the mic input can be

used as the modulator. (OM: p.15 “4. Playing vocoder sounds”)

3. Connecting pedals and switches

Connect a foot controller and pedal switch as desired.

SWITCH/PEDAL jack

Here you can connect an optional pedal switch (PS‐1/PS‐3), foot

controller (EXP‐2), or expression/volume pedal (XPV‐10).

Before you use these, you must adjust the settings in Global mode to

specify the type of device (switch or pedal) that you’ve connected.

With the factory settings, this jack is set to use a switch‐type device,

and is assigned to the “program up” (Prog. Up) function.

Different functions are available for switches and pedals.

If you’ve specified a switch (Switch), you’ll be able to change

programs, switch the octave, or turn portamento on/off. Normally

the function will remain on only while you continue holding down

the pedal, but if desired, you can change this so that the function

will toggle on/off each time you press the pedal. If you’ve specified a

pedal (Pedal), you’ll be able to control parameters such as volume,

expression, and pan. (PG: “8. Foot parameters“)

DAMPER jack

Here you can connect an optional DS‐1H damper pedal or PS‐1

pedal switch, allowing you to turn the damper effect on/off.

12

KingKORG Owner’s manual

4. Connecting a MIDI device or computer

You’ll need to make these connections if you want to use the

KingKORG’s keyboard or controllers to control an external MIDI

sound module or to use a different MIDI keyboard or a sequencer to

control the KingKORG’s sound generator. (PG: “6. MIDI parameters)

5. Connecting the AC adaptor

You must use the included AC adaptor. Using a different AC

adaptor may cause malfunctions.

Be sure that the AC outlet provides the correct voltage for your

AC adaptor.

1. Connect the included AC adapter to the DC12V jack located on

the rear panel.

2. To prevent the plug from being pulled out accidentally, wrap

the power cord around the hook on the rear panel. Be careful

not to apply excessive force to the collar of the DC plug.

Connect the plug

to an AC outlet.

When fastening the cable to

the cable hook, be careful not

to bend this area more than

necessary.

Turning the power on/off

1. Turning the power on

Before you power‐on the KingKORG, you must power‐off any

external output device such as your powered monitor speakers.

1. Turn the KingKORG’s VOLUME knob all the way toward the

left to minimize unwanted audio artifacts during startup.

2. Press and hold the power switch until the main display

appears; then release the power switch.

When the KingKORG starts up, the main display will show

information such as the program number and program name.

3. With the volume lowered on your monitor speakers or other

external output system, turn on the power of your output system.

4. Slowly raise the KingKORG’s VOLUME knob while you

adjust the volume of your output system.

2. Turning the power off

Never turn off the power while data is being saved. Doing so

may cause the KingKORG’s data to be damaged.

1. Lower the volume of your monitor speakers or other external

output system, and turn off the power of your output system.

2. Turn the KingKORG’s VOLUME knob all the way toward the

left, and press and hold the power switch until the main

display goes blank.

Auto power-off

The KingKORG has an auto power‐off function. When a certain duration

of time has elapsed without user input on the front panel buttons or

knobs, or without the keyboard being played, the power will turn off

automatically. With the factory settings, this is set to four hours.

If desired, you can disable this function as follows.

1. Disabling the auto power-off function

1. Hold down the SHIFT/EXIT button and press the PROGRAM

(GLOBAL) button to enter Global mode.

2. Use the PAGE +/- buttons to access the GLOBAL “g15: Power

Off” page.

3. Turn the value dial to choose “Disable.”

4. To save the change you’ve made, press the WRITE button to

save the global settings. (OM: p.21 “1. Saving global settings”)

If you turn off the power without saving, the changes you’ve

made to the global settings will be discarded. If you want to

use your edited settings in the future, be sure to save them.

Playing the KingKORG

Listening to the demo songs

The KingKORG contains distinctive demo songs in a variety of

styles. Before you start playing, take a moment to experience the

KingKORG’s sounds. (OM: p.112 “Demo song list”)

1. Selecting and playing a demo song

The demo songs are assigned to the category/favorites buttons.

1. Hold down the SHIFT/EXIT button and press a category/

favorites button to select a demo song.

The demo will begin playing automatically, and will continue

playing consecutively until the last song. When the last demo

song has finished playing, playback will continue from the first

demo song.

The button corresponding to the demo song that’s playing will

blink. To select a different demo song, press an illuminated

button.

2. During demo song playback, press the SHIFT/EXIT button.

Demo song playback will stop, and you will return to Program mode.

13

Playing the KingKORG

TIP:

Programs for which the SPLIT (POSITION) buon is lit up

have their voice mode set to split. (PG: “1. Timbre param‐

eters”)

3. Play the keyboard to hear the sound.

You can use the OCTAVE UP/DOWN buttons to shift the range

of pitches that can be played from the keyboard. (OM: p.14

“Switching octaves”)

Selecting programs by category

1. Press the category/favorites button that most closely matches

the program (sound) you want.

The first program in the selected category will be selected, and

that category/favorites button will light up.

2. Turn the value dial to select the desired program (sound).

3. Play the keyboard to hear the sound.

2. Selecting programs with the

FAVORITES button

In order to select programs using the FAVORITES button, you

must first have stored your favorite programs in the category/

favorites buttons. (OM: p.21 “3. Registering programs in the

category/favorites buttons”)

1. Press the FAVORITES button to make it light up; then select a

bank (A–E).

The bank will change each time you press the FAVORITES

button, and the main display will show the selected bank.

TIP:

By holding down the SHIFT/EXIT buon and pressing the

FAVORITES buon you can move backward through the

banks (E  D  C  B  A  E...).

2. Press the category/favorites button (1–8) in which you stored

the program that you want to select.

The program will be recalled, and the selected FAVORITES

screen will light up.

3. Play the keyboard to hear the sound.

Selecting and playing a

program

1. Display screen

Main display (when playing a program)

When the PROGRAM (GLOBAL) button is lit up, the main display

will show the program number and program name.

When the FAVORITES button is lit up, the display will show the

bank, program number and program name.

Program

name

Program

number

When the PROGRAM (GLOBAL) button is lit

When the FAVORITES button is lit up

Program

number

Program

name

Bank

Main display (when editing a program)

The display will show the page number, page name, parameter

name, and value. The same contents will also be shown in the

display when editing global settings (when the PROGRAM

(GLOBAL) button is blinking).

Page name

Parameter valueParameter name

Page number

OSCILLATOR sub display

The display will show information about the currently selected

oscillator.

Oscillator type number

Oscillator type name

FILTER sub display

The display will show information about the currently selected filter.

Filter type number

Filter type name

Selecting a program

The KingKORG contains 200 distinctive programs that you can start

playing immediately. So that you can select them intuitively, the

programs are organized by categories of sound. Try selecting and

playing various programs to experience the KingKORG’s sound.

1. Selecting programs by their number

1. Press the PROGRAM (GLOBAL)button to make it light up.

The main display will indicate the program number and program

name.

2. Turn the value dial to select the desired program.

14

KingKORG Owner’s manual

Adding variety to the sound

In addition to its keyboard, the KingKORG provides numerous

controllers such as the joystick, knobs, and buttons. You can vary the

sound by using these controllers to control the filter, LFO, and EG in

real time while you play.

1. Using the controllers

Joystick (JS)

You can control various parameters and effects by moving the

joystick in four directions (up/down/left/right). The result will be

different for each program; try each controller to hear what it

does for the program you’ve selected.

TIP:

“Joystick” is abbreviated as JS.

Pitch down, etc. Pitch up, etc.

Vary the vibrato depth or the speed

of the rotary speaker, etc.

Wah, effect depth, etc.

TIP:

When you release the joystick, it will automatically return

to the center position. However if you want to hold the

joystick eect so that it will continue even aer you take

your hand o the joystick, you can assign the joystick lock

function to a foot switch. (PG: “8. Foot parameters”)

TIP:

You can use the joystick as a virtual patch source. This

lets you obtain even richer and more complex eects than

those listed above. (PG: “1. Timbre parameters”)

2. Playing the keyboard

The KingKORG’s keyboard lets you control the sound in the

following ways.

Velocity

This allows the force (speed or velocity) of how you play a key

to affect the sound. Normally, key velocity is used to control the

tone or volume.

The KingKORG’s keyboard does not support aftertouch.

Some sounds will produce little or no tonal variation in

response to key velocity, or are set not to detect velocity.

Keyboard tracking

This allows the sound to be affected by the note’s position on the

keyboard. Normally, keyboard tracking is used to make the tone

become brighter as you play higher on the keyboard, or to create

a difference in volume between low and high regions of the

keyboard.

TIP:

Velocity and keyboard tracking can be used as a virtual

patch source. (PG: “1. Timbre parameters”)

Switching octaves

You can use the OCTAVE UP/DOWN buttons to shift the region

of pitches assigned to the keyboard in one‐octave steps over a

range of +/‐2 octaves.

Keyboard range Button LED

C4 – C9 UP button blinking

C3 – C8 UP button lit

C2 – C7 UP/DOWN buttons unlit

C1 – C6 DOWN button lit

C0 – C5 DOWN button blinking

Octave +2

Octave +

Octave ±0

Octave -

Octave -2

Numbers in parentheses ( ) are MIDI note numbers.

3. Playing arpeggios

The arpeggiator is a function that automatically plays a broken

chord (arpeggio) when you hold down a chord on the keyboard. The

KingKORG’s arpeggiator provides six arpeggio types, and allows

you to change various aspects of the arpeggio, such as the duration

(gate time) of the notes. It also provides a “step arpeggiator” that lets

you specify the on/off status for up to eight steps, giving you a wide

range of performance possibilities.

1. Select a program. (OM: p.13 “Selecting a program”)

As an example, let’s select a piano sound to try out this function.

2. Press the ARP (TEMPO) button to make it light up.

The arpeggiator will turn on.

3. Hold down a chord on the keyboard; an arpeggio will start

playing.

If you hold down the chord shown in the illustration below, the

notes will be sounded as depicted by the notation at the right.

(Arpeggio type: UP)

To change the tempo, hold down the SHIFT/EXIT button and

press the ARP (TEMPO) button to access the PROGRAM “a02:

Arp” page. Use the value dial to adjust the tempo.

TIP:

The KingKORG provides a tap tempo function. Hold down

the SHIFT/EXIT buon and repeatedly press the ARP (TEM‐

PO) buon at the desired timing interval to set the tempo.

4. The arpeggio will stop sounding when you take your hand off

the keys.

TIP:

If desired, you can make the arpeggio continue sounding

even aer you release the keys. (PG: “3. Arpeggio param‐

eters”)

15

Editing the sound

4. Playing vocoder sounds

The vocoder is a function that lets you vocalize into a mic while

holding down notes on the keyboard to create the impression that

the synthesizer is talking. As an alternative to inputting a human

voice, you can create many interesting effects by inputting rhythm

sounds or various waveforms.

Connecting a mic and playing the vocoder

1. Turn the front panel MIC LEVEL knob all the way toward the

left. Connect the mic to the rear panel mic jack.

2. Press the PROGRAM (GLOBAL) button to make it light.

3. Press the category/favorites SE/VOC button to make it light

up, and then turn the value dial to select a program (sound) for

which the VOCODER button is lit up.

4. Turn the MIC LEVEL knob to adjust the mic input level.

TIP:

Adjust the level so that the MIC LEVEL PEAK LED does

not light up.

5. While vocalizing into the mic, play the keyboard.

Try vocalizing different words and holding down different notes

on the keyboard, and notice the effect that this has on the

vocoder sound.

Editing the sound

How a program is organized

Before you start editing, you’ll need to understand the basics of how

the sounds are created. Once you understand how the KingKORG’s

sounds are structured, you’ll be able to freely create the sounds you

want.

1. Synthesizer

As shown in the illustration, a synth program consists of timbres

A/B, arpeggiator, vocoder and the master effects.

PROGRAM

TIMBRE A

Arpeggiator

TIMBRE B

Vocoder PRE FX MOD FX

REV/DELAY

TUBE EQ

OUTPUT

L/MONO, R

GLOBAL

Keyboard

TIMBRE

JoyStick

MIDI IN

MIC IN

Keyboard Tracking

Keyboard Velocity

Pitch Bend (JS X)

Modulation (JS+Y/-Y)

MIDI 1 3

VIRTUAL PATCH

LFO1 LFO2 EG1 EG2

Other Source

OSC1

OSC2

OSC3

MIXER FILTER AMP

Pitch

Cutoff Level PAN

Free Assign

Modulation to Synth

L

R

Audio to Effect

Modulation to Effect

OFF

ON

MASTER FX

16

KingKORG Owner’s manual

The three elements of sound: pitch, tone, and

volume

Sound has three basic elements: pitch, tone, and volume. Just like the

analog synthesizers of the past, the KingKORG analog modeling

synthesizer provides “oscillator,” “filter,” and “amp” (amplifier)

sections that control these three elements. Edit the oscillator settings

to change the pitch, the filter settings to change the tone, and the

amp settings to change the volume.

The KingKORG’s oscillators, filter, and amp

On the KingKORG, the oscillator settings are in the PROGRAM

“s05–s12: Pitch” pages and the PROGRAM “s13:OSC1–s27: OSC3)”

pages. Use the Pitch pages to specify the pitch of the basic

waveform, and use the OSCILLATOR pages to select the waveform.

The waveforms generated by these oscillators are mixed in the Mixer

page. The filter settings are in the PROGRAM “s31–38: Filter” pages.

On these pages, you can modify the tonal character by applying a

filter to the sound being generated by the oscillators. Finally, the

amp settings are in the PROGRAM “s39–42: Amp” pages, allowing

you to adjust the volume. By editing in these pages, you’ll create the

basic sound of the program.

EG, LFO, keyboard tracking, virtual patches, and

controllers

In addition to the oscillator, filter, and amp settings, the sound can

be affected by change over time, by its pitch range, or by

performance expressions. Such changes can be controlled by

modulators and controllers such as the EG (Envelope Generator),

LFO (Low Frequency Oscillator), keyboard tracking, virtual patches,

and the joystick. By using these modulators and controllers you can

apply complex changes to the sound.

Take a look at the illustration above. Observe the signal flow from

OSC  FILTER  AMP, and notice how the EGs and LFOs can

affect each section.

Timbres (TIMBRE A/B)

Each timbre consists of an oscillator, filter, amp, EG, LFO, virtual

patches, and equalizer. The KingKORG has two timbres, and you

can combine these two timbres to create a richer‐sounding program.

Oscillator (OSC1, OSC2, OSC3)

The oscillators give you a choice of 127 types of oscillator

algorithms, including the sawtooth wave and square wave typically

found on an analog synthesizer, as well as noise, PCM/DWGS, and

the waveform being input from the mic jack. You can also make the

waveform richer and thicker by applying the unison setting.

Mixer (MIXER)

This section adjusts the volume levels of oscillator 1 (OSC1),

oscillator 2 (OSC2), and oscillator 3 (OSC3), and outputs the

combined signal to the filter (FILTER).

Filter (FILTER)

The filter varies the brightness of the sound by removing or boosting

certain portions of the frequency spectrum of the sound generated by

the oscillator. Filter settings will have a large impact on the character

of the sound. In addition, you can use envelope generator 1 (EG1) to

vary the cutoff frequency of each filter over time.

Amp (AMP)

This section consists of the amp (AMP) and pan (PAN) settings. The

amp specifies the volume, and the pan specifies the stereo position

of the sound. You can also use envelope generator 2 (EG2) to vary

the volume over time.

Envelope generators (EG1, EG2)

An envelope generator applies time‐variant change to parameters that

make up the sound. Each envelope generator defines the “shape” of

the time‐variant change using four parameters: attack time, decay

time, sustain level, and release time. EG1 is assigned to control the

filter cutoff frequency, and EG2 is assigned to control the amp volume.

You are also free to use an envelope generator in conjunction with a

virtual patch as an envelope source for another parameter.

LFOs (LFO1, LFO2)

An LFO (Low Frequency Oscillator) applies cyclic change to

parameters that make up the sound. Each timbre has two LFOs, each

giving you a choice of five waveforms. LFO2 is assigned as the

source of the pitch modulation controlled by the joystick. You are

also free to use an LFO in conjunction with a virtual patch as a

modulation source for another parameter.

Virtual patch (VIRTUAL PATCH)

The virtual patch functionality lets you use not only EG or LFO but

also sources such as velocity (keyboard playing strength) and

keyboard tracking (the keyboard region that you play) as

modulation sources to control the parameters that make up the

sound. This gives you a great deal of freedom in creating original

sounds. For each timbre, you can create virtual patch settings for six

parameters. (PG: “1. Timbre parameters”)

Master effects (MASTER FX)

Each program contains three types of master effect. By applying an

effect to each timbre, you can add finishing touches to the overall

sound of the program.

Arpeggiator (ARPEGGIATOR)

The arpeggiator automatically generates an arpeggio (broken chord)

when you hold down a chord on the keyboard. For programs that

use two timbres, you can apply the arpeggiator to either or both

timbres. This is a step arpeggiator with six arpeggio types.

2. Vocoder (VOCODER)

A vocoder analyzes the frequency characteristics of one signal called

the “modulator” (such as a human voice input via a mic) and applies

these characteristics to a filter that is processing a different signal

called the “carrier” (such as an oscillator waveform), thus producing

distinctive effects such as an instrument that appears to be talking.

The KingKORG contains a sixteen‐band vocoder that can not only

simulate not the classic vocoder sounds of the past but it can also

create original vocoder sounds where the tonal character or the level

of each band can be controlled. As shown in the illustration below,

the vocoder consists of the carrier (the signal being modified), the

modulator (the signal that controls the modifying), and the vocoder

section (VOCODER) itself.

17

Editing the sound

TIMBRE A

TIMBRE B

Vocoder

MIC IN

OFF

ON

MIC IN

TIMBRE B

MIC IN

TIMBRE A Level

TIMBRE B Level

Modulator Audio Src

MIC IN

Carrier

Modulator

OFF

ON

OFF

ON

TIMBRE A / Vocoder

TIMBRE B

to EFFECTs

TIMBRE B

MIC IN

TIMBRE B

GATE

Threshold

Sens

TIMBRE A

TIMBRE B

TIMBRE A Level

TIMBRE B Level

Modulator

Carrier

Vocoder

Band 1–16

Analysis

Filter

Envelope

Follower

Synthesis

Filter

E.F.Sens

Resonance

Cuto (Fc MOD)

Formant Shift

Band

Level

Band

PAN

L

R

L

R

Vocoder

Output

Vocoder

Level

Wet

Level

Wet

Spread

Output

Envelope

HPF

HPF Level

Direct Level

HPF Gate &

Note On

VOCODER

Carrier (CARRIER)

This is the basic sound (signal). The best choice for the carrier

waveform is a waveform that contains large numbers of overtones,

such as a sawtooth wave or a pulse wave with a fixed pulse width.

The outputs of the two sources timbre A and timbre B are mixed and

used as the carrier.

Modulator (MODULATOR)

This is the sound (signal) whose character is imposed on the carrier.

Typically, a human voice is used as the modulator input. On the

KingKORG, you can select either the mic input (Input) or timbre B

(Timbre B) as the modulator. If you select timbre B, the output of

timbre B will be input to the vocoder’s modulator.

Vocoder section (VOCODER)

This consists of two sets of sixteen bandpass filters (the analysis

filter, the synthesis filter and an envelope follower). The audio signal

input to the modulator is sent to sixteen filters (the analysis filter),

and an envelope follower will detect the volume envelope (time‐

variant change) of each frequency band. The carrier signal is sent to

a separate set of sixteen filters (the synthesis filter), and the envelope

detected from the analysis filter is used to control the

volume of each band in the synthesis filter, thus varying the tonal

character of the carrier signal and producing the impression that the

carrier signal is talking. It is also possible to shift the frequencies of

the carrier bandpass filter. This allows you to raise or lower the

frequency response while preserving the character of the modulator,

creating dramatic changes in the sound.

Basic program editing

1. How to create sounds

There are two ways to edit sounds on the KingKORG.

₋ You can select a program that’s close to the sound you want, and

create the desired program by making the necessary changes.

₋ You can start editing the program from scratch (an initialized state).

Choose a method, and get started creating and playing your own

sounds!

Editing from a saved program

1. Select the program that you want to edit. (OM: p.13 “Selecting a

program”)

2. Operate the front panel knobs and dial.

Consider how the sound you’re imagining differs from the

original program, and select the parameter that you need to edit.

If you select another program or turn off the power before

you’ve written your edited program, the changes you made

will be lost. (OM: p.21 “2. Saving a program”)

If you want to create a program from scratch

If you want to create a program from scratch, start by initializing to

enter program. (OM: p.20 “1. Initializing a program”)

This results in a set of simple and easily understandable settings,

which will help you understand how each section works, and will be

convenient when creating a sound from scratch.

18

KingKORG Owner’s manual

2. Editing two timbres

In each program, you can use two timbres: TIMBRE A and TIMBRE B.

TIP:

You can’t select TIMBRE B if the PROGRAM “p03: Common”

page Voice Mode parameter is set to “Single.” If “Layer” or

“Split” is selected, the TIMBRE A/B select buons will light to

indicate the timbre that you’re editing.

TIP:

The voice mode parameter in the PROGRAM “p03: Common”

page is common to the entire program.

Using two timbres (Layer)

When using two timbres, you have a choice of two modes that

determine how the timbres will work. In this example, we’ll set the

PROGRAM “p03: Common” page Voice Mode parameter to “Layer.”

When you set this parameter to “Layer,” the two timbres will be

heard simultaneously when you play the keyboard.

1. Use the PAGE +/- buttons to access the PROGRAM “p03

Common” page.

2. Turn the value dial to set the voice mode to “Layer.”

The TIMBRE A select button and the master effect timbre LEDs

will light up.

Selecting a timbre to edit

When editing a program that uses two timbres, you’ll need to select

a timbre to edit.

Use the TIMBRE A/B select buttons to select the timbre that you

want to edit. The timbre select button you selected will light up,

allowing you to edit that timbre.

Editing the filter and EG

On the KingKORG you can use the front panel knobs and buttons to

control the filter and EG in real time.

You can choose one of three ways in which the knobs will work

when you turn them. (PG: “5. GLOBAL parameters”)

FILTER

Cutoff (CUTOFF)

This adjusts the cutoff frequency of the filter. The brightness of

the sound will change. Turning the knob toward the left will

darken the sound; turning it toward the right will brighten the

sound.

Resonance (RESONANCE)

This adjusts the amount of resonance for the filter. Resonance

adds a distinctive tonal character.

EG (Envelope Generator)

Attack (ATTACK1, ATTACK2)

This adjusts the attack time of EG1 (filter EG) and EG2 (amp

EG). The attack specifies the time from note‐on (the moment you

press the key) until the attack level is reached. It changes the

way in which the EG1 and EG2 will start. Turning the knob

toward the left will shorten the attack time; turning it toward the

right will lengthen the attack time.

Decay (DECAY1, DECAY2)

This adjusts the decay time of EG1 (filter EG) and EG2 (amp EG). The

decay specifies the time from when the attack level is reached until the

sustain level is reached. Turning the knob toward the left will shorten

the decay time; turning it toward the right will lengthen the decay time.

Sustain (SUSTAIN1, SUSTAIN2)

This adjusts the sustain level of EG1 (filter EG) and EG2 (amp

EG). The sustain specifies the level that is reached after the decay

time has elapsed and is sustained as long as you hold down the

key. Turning the knob toward the left will lower the sustain level;

turning it toward the right will raise the sustain level.

Release (RELEASE1, RELEASE2)

This adjusts the release time of EG1 (filter EG) and EG2 (amp

EG). The release specifies the time from note‐off (the moment

you release the key) until the sound has decayed to silence. It

will vary the release time of EG1 and EG2. Turning the knob

toward the left will shorten the release time; turning it toward

the right will lengthen the release time.

0

Attack Level

Time

Note on

Note off

Level

1: Attack Time 3: Sustain Level

2: Decay Time 4: Release Time

1

3

4

2

EG2

Adjusting effect settings

The KingKORG provides master effects that let you apply a variety

of effects to the sound, such as distorting it, modulating it, or adding

reverberation. The master effects are applied to the overall sound of

the two timbres.

The master effects consist of three sections (PRE FX, MOD FX, REV/

DELAY), and you can choose one type of effect for each section.

For example you might choose “EP.AMP” for the PRE FX section,

“TREMOLO” for the MOD FX section, and “HALL” for the REV/

DELAY section. For each section, you can also specify the timbre(s)

where that effect will apply.

1. Press an FX type select dial to select the timbre(s) where that

effect will apply.

The selected timbre LED(s) will light up. If both timbre LEDs A

and B are unlit, that effect will not be applied.

The timbre LED B will not light if the program’s voice

mode is “Single.”

2. Select an effect.

The LED of the selected effect will light.

19

Editing the sound

3. Use the FX control knobs to adjust the parameter values.

3. Editing the vocoder

Selecting the vocoder for editing

The procedure for editing the vocoder is essentially the same as

when editing a timbre, but you’ll first need to turn the vocoder on

and select the vocoder as the target for editing.

The “v02:Voc.Carrier–v18:Voc.Amp” pages won’t appear

unless you’ve pressed the VOCODER button to turn on the

vocoder switch.

The parameters of the 16 band‐pass filters (analysis filter and

synthesis filter) and the envelope follower can be edited in the

PROGRAM “v09:Voc.Filter–v18:Voc.Amp” pages.

1. Select a synth program. (OM: p.13 “Selecting a program”)

2. Press the VOCODER button to make it light up.

The vocoder will turn on, and will be selected as the target for

editing.

3. Use the PAGE +/- buttons to access the vocoder parameter

editing pages.

TIP:

If you raise the direct level in the PROGRAM “v15:Voc.Amp”

page, the audio input will be output directly. Adjust this value

while checking the audio input.

TIP:

If you are unable to notice the eect, press the VOCODER

buon to make it light up, and then adjust the timbre A level in

the PROGRAM “v02:Voc.Carrier” page or the vocoder level in

the PROGRAM “v18:Voc.Amp” page.

Carrier (CARRIER)

The most suitable waveform for the carrier is a waveform that

contains a large number of overtones, such as a sawtooth wave

or a pulse wave with a fixed pulse width. These parameters can

be edited in the PROGRAM “v02–v03:Voc.Carrier” pages.

TIP:

To input a sawtooth wave to the carrier, edit timbre A

so that its PROGRAM “s13:OSC1” page Type seing is

“SAW,” and edit the vocoder seing in the PROGRAM

“v02:Voc.Carrier” page to specify the timbre A input level.

Modulator (MODULATOR)

A human voice is typically input as the modulator. On the

KingKORG, you can choose either the mic input (Input) or

timbre B (Timbre B) as the modulator. You can edit these

parameters in the PROGRAM “v04:Voc.Modultr” page.

4. Editing the arpeggiator

Selecting the timbre(s) to arpeggiate

For a program that uses two timbres, you can select the timbre(s)

that will be played by the arpeggiator.

In the PROGRAM “a05:Arp” page you can specify the timbre(s) that

will be sounded by the arpeggiator. You can make both timbres A/B

be arpeggiated, or arpeggiate just one timbre.

Tonal effects synchronized with the arpeggio

Synchronizing the LFO frequency or delay time to the

arpeggiator tempo

You can synchronize the frequency of LFO1 or LFO2 to the arpeggio

tempo. This lets you apply modulation that’s synchronized with the

tempo. This also gives you the ability to specify an effect’s delay

time as a multiple of the tempo so that the delay time will follow

even if you change the tempo of the arpeggio. You can also

synchronize the KingKORG’s arpeggiator to an external MIDI

sequencer, so that the LFO1/2 frequency or the delay time will be

controlled from your external sequencer.

Modifying the arpeggio

You can modify the arpeggio by turning each arpeggio step on/off.

This is called the “step arpeggiator” function.

Using the step arpeggiator to modify the arpeggio

1. Press the PROGRAM (GLOBAL) button to make it light.

2. Use the PAGE +/- buttons to access the PROGRAM “a12:Arp”

page.

3. Press the value dial.

The step setting screen will appear.

4. Use the PAGE +/- buttons to move the “ ” cursor, selecting

the step that you want to edit.

5. Turn the value dial to turn the step on or off.

In the main display, set the indication to “O” (on) for steps that

you want to enable. If you select “_” (off), the note for that step

will be a rest.

Repeat steps 4 and 5 to specify other steps.

6. Press the value dial to confirm the on/off settings of the steps.

TIP:

The number of available steps can be specied in the PRO‐

GRAM “a10: Arp” page. (PG: “3. Arpeggio parameters”)

5. Restoring an edited program value to

its original setting

When you set a value to the same value stored in the original preset

program or saved program, the ORIGINAL VALUE LED will light up.

After editing a value, you can restore that value to its original setting

by turning knob to the value that makes the ORIGINAL VALUE

LED light up.

If you want to discard all the edits you’ve been making, and recall

the content that’s stored in internal memory, simply select another

program without saving the current edits, and then recall the

desired program once again.

20

KingKORG Owner’s manual

About global settings

Switch to Global mode when you want to change settings that apply to

the entire KingKORG or when you want to make MIDI‐related settings.

Global mode contains various settings such as master tune,

transpose, and global MIDI channel. (PG: “5. GLOBAL parameters”)

Changes you make to these settings will be lost if you turn off

the power without saving. Be sure to save your settings if you

want to keep them. (OM: p.21 “1. Saving global settings”)

Other functions

1. Initializing a program

Here’s how to initialize the settings of the selected program.

This procedure will initialize the settings of the that’s being

edited program. It will not change the contents stored in

internal memory.

If you want to save the initialized state, save the program.

(OM: p.21 “2. Saving a program”)

1. Select the program that you want to initialize. (OM: p.13

“Selecting a program”)

2. Use the PAGE +/- buttons to access the PROGRAM “u01:

Utility” page, and press the value dial.

A screen will ask you to confirm that you want to initialize the

program.

TIP:

If you decide not to initialize, press the SHIFT/EXIT buon.

3. Press the value dial once again.

When initialization is finished, the display will indicate

“Complete!” and you will automatically return to the top screen.

2. Copying a timbre

Here’s how you can copy the settings of another program’s timbre to

a timbre (either A or B) of the currently selected program.

This operation recalls settings to a timbre of the program that’s

being edited . It will not change the contents stored in internal

memory.

Only one timbre can be copied at a time.

1. First select the program that includes the copy-destination

timbre. (OM: p.13 “Selecting a program”)

2. Use the PAGE +/- buttons to access the PROGRAM “u02:

Utility” page, and press the value dial.

3. Turn the value dial to select the program that contains the

copy-source timbre, and press the dial to confirm your selection.

When selecting a program, the TIMBRE A or B select button will

light depending on the timbres used by the copy‐source

program.

The TIMBRE A or B select buttons will not respond if you

press them at this time.

4. Confirm the copy-source timbre.

If the copy‐source program uses two timbres, the copy‐source

timbre button will blink. Select the desired timbre if necessary,

and press the value dial to confirm your selection.

TIP:

While the TIMBRE A or B select buon is blinking, you can

also make your choice by pressing a buon.

5. Confirm the copy-destination timbre.

If the copy‐destination program uses two timbres, the TIMBRE

A or B select button will blink. As necessary, turn the value dial

to select the copy‐destination timbre, and press the value dial to

confirm your selection.

6. A confirmation screen will appear in the main display; verify

the settings, and press the value dial.

When the copy is completed, the display will indicate

“Complete!” and you will return to the top screen of the “u02:

Utility” page.

TIP:

If you want to save the copied state, save the program. (OM:

p.21 “2. Saving a program”)

TIP:

You can press the SHIFT/EXIT buon to return to the previous

step. If you decide not to copy a timbre, press the SHIFT/EXIT

buon several times.

3. Restoring the factory settings

Here’s how to restore the KingKORG’s programs and global data

settings to their factory‐set condition. The factory settings are called

the “preload data.” To return to the factory‐set state, execute the

Load Preload operation.

When you execute Load Preload, the factory set data will

overwrite the data you’ve saved in internal memory. Make

sure that you don’t mind losing this data.

Do not touch the KingKORG’s knobs or keyboard while the

Preload operation is in progress. Never turn off the power

during this process.

Of factory‐set programs 1–300, programs 201–300 (programs

containing no preset data) will not return to their factory‐set

state. If programs are saved in these locations, they will remain

in that state.

You can’t execute the Load Preload operation if memory

protect is turned on. Turn off memory protect before you

ページが読み込まれています...

Korg KingKORG 取扱説明書

Korg KingKORG 取扱説明書

他の言語で

関連論文

その他のドキュメント