Sony HT-MT500 Operating Instructions Manual

C:\FY17HT_models\VG2\KAIHAN\SP1\4687810621\4687810621HTMT500S

P1\00COV-HTMT500SP1\010COV.fm

masterpage:

Right

HT-MT500

4-687-810-62(1)

HT-MT500

Operating Instructions

GB

CT

Sound Bar

HT-MT500

4-687-810-62(1)

C:\FY17HT_models\VG2\KAIHAN\SP1\4687810621\4687810621HTMT500S

P1\00COV-HTMT500SP1\010BCO.fm

masterpage: Left

The software of this system may be updated in the future. To find out details on any available

updates, please visit the following URL.

http://www.sony-asia.com/section/support

2

GB

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

To reduce the risk of fire, do not cover

the ventilation opening of the appliance

with newspapers, tablecloths, curtains,

etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance to

dripping or splashing, and do not place

objects filled with liquids, such as vases,

on the appliance.

The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has been

turned off.

As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in the

unit, disconnect the main plug from the

AC outlet immediately.

As the main plug of AC power adapter is

used to disconnect the AC power

adapter from the mains, connect it to an

easily accessible AC outlet. Should you

notice an abnormality in it, disconnect it

from the AC outlet immediately.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

Indoor use only.

Recommended cables

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

For the Bar Speaker

The nameplate is located on the bottom

of the Bar Speaker.

For the AC adapter

Labels for AC adapter Model No. and

Serial No. are located at the bottom of

AC adapter.

WARNING

3

GB

Table of Contents

What’s in the Box ..........................5

What You Can Do with the

System .....................................6

Guide to Parts and Controls ..........8

About the Home Menu ................ 13

Setup

Connecting a TV or Portable Audio

Device via the ANALOG IN

Jack ........................................ 15

Connecting to a Wired

Network ................................. 16

Connecting to a Wireless

Network ..................................17

Detaching the Grille Frame ......... 19

Listening to the Sound

Listening to the TV ......................20

Listening to the Connected AV

Device ....................................20

Listening to Music on a USB

Device .....................................21

Selecting the Sound Effect

Setting the Sound Effect that is

Tailored to Sound Sources

(SOUND FIELD) ....................... 22

Enjoying Clear Sound with Low

Volume at Midnight

(NIGHT) .................................. 23

Making Dialogues Clearer

(VOICE) ................................... 23

Adjusting the Volume of the

Subwoofer .............................24

Adjusting the Delay Between the

Picture and Sound .................24

Listening to Music/Sound

with the BLUETOOTH®

Function

Listening to Music from a Mobile

Device ....................................25

Listening to Sound of the

Connected TV or Device from

Headphones ..........................28

Listening to Music/Sound

Using the Network Function

Listening to Music on your PC via a

Home Network ......................30

Listening to Music on the Mobile

Device with SongPal ............. 31

Using Chromecast built-in ........... 32

Using Spotify ................................ 33

Using the MUSIC SERVICE

Button ....................................34

Connecting the SongPal Link-

Compatible Device

(Wireless Multi Room/Wireless

Surround) ...............................35

Using the Various Functions/

Settings

Customizing the Speaker Settings

for Surround Sound ...............38

Performing the Wireless Connection

of the Subwoofer

(SECURE LINK) ........................39

Playing Compressed Audio Files or

CDs by Upscaling to Near Hi-

Resolution Sound Quality

(DSEE HX) ...............................40

Enjoying Multiplex Broadcast Sound

(AUDIO) .................................. 41

Deactivating Buttons on the Main

Unit ........................................ 41

Basic Setup



Startup Guide

(separate

document)

GB

4

GB

Changing the Brightness of the

Front Panel Display and

BLUETOOTH Indicator

(DIMMER) .............................. 42

Saving Power in Standby

Mode ..................................... 42

Sending the Remote Signal to the

TV via the Main Unit ............. 43

Using the Control for HDMI

Function ................................ 43

Using the “BRAVIA” Sync

Function ................................ 45

Using the Setup Display .............. 46

Options Menu List ........................52

Troubleshooting

Troubleshooting ...........................53

Resetting the System .................. 60

Additional Information

Specifications ...............................61

Power Consumption by the Setting

Value for Each Standby

Mode ..................................... 63

Playable Types of Audio Files ..... 64

Supported Input Audio

Formats ................................. 65

On BLUETOOTH

Communication .................... 66

END USER LICENSE

AGREEMENT ...........................67

Precautions .................................. 71

Index .............................................75

5

GB

What’s in the Box

•Bar Speaker (1)

•Subwoofer (1)

• Remote control (1)

• R03 (size AAA) battery (2)

• HDMI cable (supports the specification

equal to High Speed HDMI cable with

Ethernet) (1)

•AC adapter (1)

• AC power cord (mains lead) (1)

• AC power cord (mains lead) for the

subwoofer (1)

• Speaker pad for the subwoofer (4)

•Startup Guide

• Operating Instructions

*For Taiwan models

** For other countries/regions

*

**

*

**

6

GB

What You Can Do with the System

“Listening to Music

on a USB Device”

(page 21)

“Using the Control for HDMI Function”

(page 43)

“Using the “BRAVIA” Sync Function”

(page 45)

“Performing the Wireless

Connection of the Subwoofer

(SECURE LINK)” (page 39)

“Using Spotify” (page 33)*

“Using the MUSIC SERVICE Button”

(page 34)

“Listening to the TV” (page 20)

“Listening to the Connected AV Device” (page 20)

* This service may not be available in some

countries/regions.

* To play on the system, you need the Spotify

Premium account.

Connecting the TV

(refer to “Startup Guide” (separate

document) or see “Connecting a TV or

Portable Audio Device via the ANALOG

IN Jack” (page 15).)

Blu-ray Disc™ player, cable

box, or satellite box, etc.

7

GB

“Listening to Music from a Mobile

Device” (page 25)

“Listening to Music on the Mobile

Device with SongPal” (page 31)

“Listening to Sound of the Connected

TV or Device from Headphones”

(page 28)

“Listening to the Same Music

in Different Rooms (Wireless

Multi Room)” (page 35)

“Adding Rear Speakers

(Wireless Surround)” (page 35)

“Listening to Music on your PC via a

Home Network” (page 30)

“Connecting to a Wired

Network” (page 16)

Internet

Router

Modem

Wireless LAN router

“Connecting to a Wireless

Network” (page 17)

8

GB

Guide to Parts and Controls

Details are omitted from the illustrations.

Front

 N-Mark (page 26)

When using the NFC function, touch

your NFC-compatible device to the

mark.

 (input select) button

(page 13, 20)

 BLUETOOTH PAIRING button

(page 25)

 (MUSIC SERVICE) button

(page 34)

 +/– (volume) buttons

 (power) button

Turns on the system or sets it to

standby mode.

 (USB) port (page 21)

 BLUETOOTH indicator

– Flashes quickly in blue: During

pairing standby status

– Flashes in blue: BLUETOOTH

connection is being attempted

– Lights in blue: BLUETOOTH

connection has been established

 Front panel display

 Remote control sensor

Point the remote control at the

remote control sensor to operate

the system.

Bar Speaker (Main Unit)

9

GB

Rear

 DC IN jack

 LAN(100) port

 HDMI OUT (TV (ARC)) jack

 ANALOG IN jack

 TV IN (OPT) jack

10

GB

 Ventilation holes

For safety, do not block the

ventilation holes.

 (power) button

Turns on the subwoofer or sets it

to standby mode.

 Power indicator

– Lights in red: The subwoofer is in

standby mode

– Lights in green: The subwoofer is

connected to the system

– Lights in orange: The subwoofer is

connected to the system with the

Secure Link function

– Flashes in green: The subwoofer is

attempting to connect to the

system

– Flashes in orange: The subwoofer

is attempting to connect to the

system with the Secure Link

function

 SECURE LINK button (page 39)

 AC IN terminal

Subwoofer

11

GB

 INPUT +/– (page 13, 20)

 (power)

Turns on the system or sets it to

standby mode.

 DISPLAY

Displays playback information

from the TV input on the front

panel display.

 CLEAR AUDIO+ (page 22)

SOUND FIELD (page 22)

VOICE (page 23)

NIGHT (page 23)

 DIMMER (page 42)

 Color buttons

Shortcut keys for selecting items

on some menus.

 MUSIC SERVICE (page 34)

BLUETOOTH PAIRING (page 25)

 OPTIONS (page 24, 52)

Displays the options menu on the

TV screen.

The options menu is not

displayed for the TV input.

BACK (page 13)

/// (page 13)

(enter) (page 13)

HOME (page 13)

 (muting)

Turns off the sound temporarily.

 (volume) +*/–

Adjusts the volume.

SW  (subwoofer volume) +/–

Adjusts the volume of the

subwoofer.

 Playback operation buttons

/ (rewind/fast forward)

Searches backward or forward.

/ (previous/next)

Selects the previous/next

chapter, track, or file.

 (play)*

Starts or re-starts playback

(resume play).

Remote Control

12

GB

 (pause)

Pauses or re-starts playback.

 (stop)

Stops playback.

 BLUETOOTH RX/TX (BLUETOOTH

receiver/transmitter) (page 29)

 AUDIO* (page 41)

*The AUDIO, , and  + buttons have a

tactile dot. Use it as a guide during

operation.

13

GB

About the Home Menu

You can display the home menu on the TV screen by connecting the system and TV

with the HDMI cable (supplied). From the home menu, you can set the various

settings by selecting [Setup] or select the input or service that you want to watch

from the input list. The home menu is displayed in the language that is selected in

[Easy Setup]. (The following screen is an example when selecting English.)

1 Press HOME.

The home menu appears on the TV screen.

2 Press /// to select [Setup], an item on the input list, or [Wireless

Surround], then press .

The selected input, setup display, or setting display for the wireless

surround function appears on the TV screen.

To return to the previous screen, press BACK.

Using the Home Menu

[Setup]

Input list

[Wireless Surround]

HOME

BACK

///, (enter)

14

GB

Input list

[Setup]

See “Using the Setup Display” (page 46).

[Wireless Surround]

Displays the setting display for the wireless surround function that allows

you to use the wireless speakers (not supplied) as the surround speakers of

the system. Perform the setting by following the on-screen instructions.

For details about the supported wireless speakers, refer to the following URL.

http://sony.net/nasite

Tip

You can also select the input by pressing INPUT +/– repeatedly.

In these Operating Instructions, the operations are described as steps that are

operated on the home menu displayed on the TV screen by using the remote control

while the system and TV are connected with the HDMI cable (supplied).

The operating steps that select items on the TV screen by using /// and are

simplified in the following way.

Example: Select [Setup] from the home menu.

The operation that selects an item by pressing /// and is expressed as

“select.”

Example: Select [Network Settings] - [Internet Settings] - [Wired Setup] on the

home menu.

When repeating the operation that selects an item by pressing /// and , the

selected items are linked with “-.”

Tips

• You can use the buttons on the main unit if they have the same or similar names as those

on the remote control.

• Characters in brackets [ ] appear on the TV screen. Characters in quotes “ ” appear in the

front panel display.

Input name Explanation

[TV] Outputs the TV sound. (page 20)

[Bluetooth Audio] Outputs the sound of device that is connected with the

BLUETOOTH function. (page 25)

[Analog]

Outputs the sound of device that is connected to the ANALOG IN jack.

(page 20)

[USB] Outputs music files stored on a connected USB device. (page 21)

[Home Network] Outputs music files on the device that is connected via the

network. (page 30)

[Music Service List] Displays the operation method for music services. (page 34)

About the Steps Description

15

GB

Setup

Basic Setup

Refer to Startup Guide (separate

document).

Connecting a TV or

Portable Audio Device

via the ANALOG IN Jack

To connect following devices to the

system, connect them via the ANALOG

IN jack on the system.

– TV that does not have an HDMI jack

and optical digital output jack

– Portable audio device such as a

smartphone, WALKMAN®

If the TV’s headphone jack also serves as

an audio output jack, check the audio

output settings of the TV. For details, refer

to the operating instructions of the TV.

Setup

Note

Smartphone,

WALKMAN®, other

audio devices etc.

TV

Analog audio cable

(not supplied)

Analog

audio out

16

GB

Connecting to a Wired

Network

Prepare the network by connecting the

system and PC to your home network

with a LAN cable.

The following illustration is the example

for connection of the system and PC to

your home network.

The server needs to be connected to the

same network as that of the system.

Tip

We recommend that you use a shielded

straight interface cable (not supplied).

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Auto].

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

5 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wired Setup].

4 Select [Manual].

Connecting to a PC or Router

with a LAN Cable

Note

Internet

LAN cable

(not supplied)

Server

Router

Modem

Connecting by Obtaining

the Network Information

Automatically

Connecting by Using a

Fixed IP Address

17

GB

Setup

5 Perform the setting by following

the on-screen instructions.

The system starts network settings

and the network setting status

appears.

Press / to browse information,

and then press .

6 Select [Save & Connect].

The system starts connecting to the

network. For details, refer to the

messages that appear on the TV

screen.

Connecting to a Wireless

Network

Prepare the network by connecting the

system and PC to your wireless LAN

router.

The server needs to be connected to the

same network as that of the system.

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the

network settings with the WPS button.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless

Setup] - [Wi-Fi Protected Setup™

(WPS)].

4 Select [Start].

5 Press the WPS button on the

access point.

The system starts connecting to the

network.

Note

Connecting with the WPS

Button

18

GB

If your wireless LAN router (access point)

is not compatible with Wi-Fi Protected

Setup (WPS), check the following

information in advance.

– The network name (SSID)*

_____________________________________

– The security key (password)**

_____________________________________

* SSID (Service Set Identifier) is a name that

identifies a particular access point.

**This information should be available

from a label on your wireless LAN router/

access point, from the operating

instructions, from the person who set up

your wireless network, or from the

information provided by your Internet

service provider.

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Setup] from the home

menu.

The setup display appears on the TV

screen.

3 Select [Network Settings] -

[Internet Settings] - [Wireless

Setup].

The list of the network name

appears on the TV screen.

4 Select the desired network name

(SSID).

5 Enter the security key (or

password) using the software

keyboard, and then select [Enter].

The system starts connecting to the

network.

Select [New connection registration] -

[Manual registration] in step 4 of

“Connecting by Selecting the Network

Name (SSID)”and follow the on-screen

instructions.

Select [New connection registration] in

step 4 of “Connecting by Selecting the

Network Name (SSID)” and select [(WPS)

PIN Method].

SongPal can connect the system to the

same wireless network as that of the

mobile device. For details, follow the

instruction of the app or refer to the

following URL.

http://info.songpal.sony.net/help/

Connecting by Selecting the

Network Name (SSID)

Connecting by Using a Fixed

IP Address

Connecting by Using a PIN

Code

Connecting by SongPal

19

GB

Setup

Detaching the Grille

Frame

You can detach the grille frame.

We recommend that you use the main

unit without attaching the grille frame if

you will be listening to High-Resolution

Audio.

To attach the grille frame, fit it to the

main unit by directing the arrow mark

on the rear of the grille frame upward.

The grille frame is fixed by a magnet.

Arrow mark

20

GB

Listening to the TV

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [TV] on the home menu.

3 Select the program using the TV’s

remote control.

The selected TV program appears

on the TV screen and the TV sound

is output from the system.

4 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote

control (page 24).

Set the speakers setting of the TV (BRAVIA)

to Audio System. Refer to the operating

instructions of your TV regarding how to

set the TV.

Tip

You can select [TV] by pressing INPUT +/–

on the remote control.

Listening to the

Connected AV Device

1 Press HOME.

The home menu appears on the TV

screen.

2 Select [Analog].

The [Analog] screen is displayed on

the TV screen.

3 Adjust the volume.

• Adjust the volume by pressing 

+/– on the remote control.

• Adjust the subwoofer volume by

pressing SW  +/– on the remote

control (page 24).

Tip

You can select the input by pressing INPUT

+/– on the remote control.

Listening to the Sound

Note

ページが読み込まれています...

Sony HT-MT500 Operating Instructions Manual

Sony HT-MT500 Operating Instructions Manual

他の言語で

関連論文

その他のドキュメント