Socket Mobile CX4039-3102 Linear Barcode Plus QR Code Scanner ユーザーガイド

SS®

800 S

UG

2

Package Contents 3

Optional Charging Accessories 4

Product Information 5

Charge the Battery 6

Scanning Barcodes 7

Bluetooth Connection Modes 8-9

How to setup our scnner

Companion App 10

Cn’t use Compnon App

How to setup our scnner n Bsc Mode

Apple®, Android, Windows 11

Setup usn Applcton Mode

Apple 12

Android 13

Windows 15

Bluetooth Unpairing 16

Factory Reset 17

Restore Method 18

Status Indicators 19-21

Quick Programming 22-26

Helpful Resources 27

Safety, Bluetooth, Compliance & Warranty 28-33, 36-39

Battery Warning Statements 34-35

Table of Contents

3

Thn ou for choosn Socet Moble Let’s et strted

Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of

Microsoft Corporation in the United States and other countries. Apple®, iPad®, iPad Air®, iPad mini®, iPad Pro®, iPhone®, iPod touch®,

Objective-C®, Swift™, and Xcode® are registered trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth®

Technology word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket

Mobile, Inc. is under license. Other trademarks and trade names are those of their respective owners.

Insert Card

USB Charging

Cable

SocketScan™

800 Series

Universal

Klip

Package Contents

4

DurCse

Socket Mobile DuraSled Case combines and safeguards both

the 800 Series and mobile device as a one-handed scanning

solution that simultaneously charges both devices.

Available:

• Apple

• Samsung

Watch our video on how to setup your DuraCase.

Optional Charging Accessories

DuraCase

Charging Dock

DuraCase

6 Multi-Bay Charger

DuraCase

Charging

Adapter

5

Micro USB Port Lanyard Hook

Lanyard Attachment (not included)

Bluetooth indicator LED

Battery indicator LED

Power button*

Scan button

Socket Mobile’s barcodes scanners can be wiped clean with a cloth dampened

with isopropyl alcohol or water. Or, the barcode scanners can be wiped clean

with a Sani-Cloth.

Warning: DO NOT IMMERSE IN WATER (scanner’s mechanics could be

damaged)

DO NOT USE BLEACH FOR CLEANING (scanner’s material property may be

affected)

*Also used to display the on-screen keyboard in Basic Mode (iOS only).

Product Information

6

1. Insert charging cable into an AC charging adapter

(not included - most smartphones and tablets come with AC Adapters that

look something like this.)

2. Insert Micro USB into the 800 Series USB port.

3. The 800 Series will beep twice indicating adequate power is being supplied

to the unit.

Side LED status

• Red = Charging

• Green = Fully charged

Note: The SocketScan comes with a pre-installed rechargeable Lithium Ion

battery, the initial full charging of the battery can take up to 8 hours.

Power On

Press and hold down the small power button on the side until the SocketScan

beeps twice (low-high tone).

Charge the Battery

8 Hours

7

Scanning Barcodes

After connecting the SocketScan to your device, open an application. Place the

cursor where you want to enter the scanned data.

1. Hold the SocketScan a few inches from the barcode.

2. Aim, press and hold the trigger button.

By default, the SocketScan will beep, vibrate, and the side LED will flash green

to confirm successful scan.

SocetScn

S800

~4” to 8”

scnnn

dstnce

SocetScn

S840

~6” to 12”

scnnn

dstnce

SocetScn

S860

~2” to 30”

scnnn

dstnce

8

Connect your reader using one of the following Bluetooth connection modes:

Bluetooth Connecton Profles

Bluetooth Mode Description

OS Applcton Mode*

(Defult)

Use this mode with an

Apple app designed for

Socket Mobile barcode

readers.

• Use with an App developed for iOS devices

• Software installation is required

• Mode to use for iOS applications that

support Socket Mobile readers

Androd/Wndows

Applcton Mode

Use this mode with an

Android app designed for

Socket Mobile barcode

readers.

• Software installation is required

• More efficient and reliable data

communications for barcodes containing lots

of data

• Mode recommended for applications

supporting Socket Mobile readers

Bsc ebord Mode

Configures the barcode

reader to Human Interface

Device (HID).

• NO software installation needed

• Connects to most devices

• Good for barcodes containing small amounts

of data

• Barcode reader interacts with host device

like a keyboard

*B defult, the reder s set to OS Applcton Mode

Bluetooth Connection Modes

9

Bluetooth Connection Modes

Opertn Sstem Connecton Optons

Operating

Systems

(OS)

Devices

Bluetooth

HID

Support

Bluetooth

SPP

Support

Bluetooth

Apple

Serial

Specific

(MFi Mode)

Android Android 4.0.3 &

later Ye s Yes N/A

Apple iOS iPod, iPhone, &

iPad Yes N/A Yes

Windows

PC Windows 8, 10, 11 Yes Yes N/A

Mac OS

Mac OS X 10.4 to

10.X

Mac Books, Mac

Mini, & iMac

Yes No N/A

Note: To switch from one mode to the other you must remove the pairing

information from both devices - host computer and the scanner. (see unpairing

procedure on page 17)

The SocketScan will unpair and automatically power off. The next time you

power on the SocketScan, it will be discoverable.

Select the appropriate mode and pair with the second host device.

10

Companion App

Socket Mobile Companion helps you configure Socket

Mobile barcode readers from the convenience of a mobile

device.

Register a device and extend your warranty by 90 days

• Add multiple devices

• Purchase accessories (limited availability)

• Browse app partners

The Companion app enables you to configure the reader into the faster and

more accurate App Mode, so it can be controlled by other apps, such as

Shopify and Square, to name a couple of the 1000+ apps available.

The Socket Mobile Companion app is designed to ensure you get the maximum

utility benefits from your Socket Mobile devices.

Scan this QR code with your

mobile device to download

our new app!

Scan this QR code with your

mobile device to download

our new app!

11

Connect Devce n Bsc Mode

In this mode the scanner functions and communicates similar to a keyboard.

Therefore, the scanner will work with Notes, and any other application that

supports an active cursor.

1. Power on the scanner. Make sure the scanner is discoverable (unpaired and

Bluetooth LED blinking).

2. Go to Settings > Bluetooth.

3. Make sure the Bluetooth is “On” and scan for devices.

4. In the list of found devices, tap S8xx [xxxxxx] to Pair.

5. The scanner will connect to the host device.

6. The scanner will beep once after it has connected.

*If you have trouble connecting or pairing with host device, turn host device’s

Bluetooh off/on, and/or perform factory reset on the scanner (see page 49).

Now you are ready to scan barcodes!

Basic Mode

12

Application Mode

Connect Apple OS devce n Applcton Mode

Please check with your scanner application vendor or visit

www.socketmobile.com/appstore to confirm your scanner-enabled application

supports the scanner.

If you are using the scanner with an Apple iOS device and a scanner-enabled

Application that does not provide instructions how to connect your scanner,

please use the following steps.

1. Power on the scanner. Make sure the scanner is discoverable (unpaired).

The Blue light should be blinking fast.

2. Scan the barcode to change the profile to Application Mode (MFI-SPP).

Use with iPad, iPod touch, and iPhones.

3. Turn on Bluetooth on the Apple device. Go to Settings > Bluetooth. A

Bluetooth Devices search will begin.

4. Tap Socket S8xx[xxxxxx] in the list of other devices found. After a few

seconds the status will change to “Connected” and the LED will stop

blinking and turn solid blue.

Note: The characters in brackets are the last 6 characters of the Bluetooth

Address.

5. Launch your scanner-enabled Application. The scanner will beep once

indicating that it is connected to the appropriate application.

Now you are ready to scan barcodes!

13

Application Mode

Applcton Mode (SPP) for Wndows (opton 1) or Androd

(Auto Connect - No configuration required for Application pairing)

1. Power on the scanner. Make sure the scanner is discoverable (unpaired).

The Blue light should be blinking fast.

2. Scan the barcode to change the profile to Application Mode (SPP).

3. Turn on Bluetooth on the Android device. Go to Settings > Bluetooth.

A Bluetooth Devices search will begin.

4. Tap Socket S8xx[xxxxxx] in the list of other devices found. After a few

seconds the status will change to “Connected” and the LED will stop

blinking and turn solid blue.

Note: The characters in brackets are the last 6 characters of the

Bluetooth Address.

5. Launch your scanner-enabled Application. The scanner will beep once

indicating that it is connected to the appropriate application.

Now you are ready to scan barcodes!

14

Application Mode

Applcton Mode (SPP) for Androd for S800 Rev M nd below

(Auto Connect - No configuration required for Application pairing)

1. Power on the scanner. Make sure the scanner is discoverable (unpaired).

The Blue light should be blinking fast.

2. Scan the barcode to change the profile to Application Mode (SPP).

3. Turn on Bluetooth on the Android device. Go to Settings > Bluetooth.

A Bluetooth Devices search will begin.

4. Tap Socket D760[xxxxxx] in the list of other devices found. After a few

seconds the status will change to “Connected” and the LED will stop

blinking and turn solid blue.

Note: The characters in brackets are the last 6 characters of the Bluetooth

Address.

5. Launch your scanner-enabled Application. The scanner will beep once

indicating that it is connected to the appropriate application.

Now you are ready to scan barcodes!

15

Application Mode

Connect Wndows (opton 2) n Applcton Mode

Note: Make sure you have administrative privileges.

1. Download the latest SocketScan 10 software from Socket Mobile’s support

web page.

2. Follow the on-screen instructions to install the software.

3. In SocketScan 10 Settings, select an incoming Bluetooth serial COM port.

Note: If there is none, please click Ports to create at least one new incoming COM

port in Bluetooth settings.

4. Power on the scanner. Make sure the scanner is discoverable to be

connected to Bluetooth (unpaired and Bluetooth LED blinking).

5. Launch SocketScan 10 and click on the SocketScan 10 icon in the task tray. In

the pop-up menu, click Socket EZ Pair.

6. Scan the barcode that appears on the screen.

7. Open the Bluetooth settings, add and pair the scanner manually. (If

prompted for a passkey, enter 0000)

8. Open SocketScan. From EZ pair, select the pre-paired Bluetooth option. Click

on the scanner to pair.

Note: The characters in brackets are the last 6 characters of the Bluetooth

Address.

Now you are ready to scan barcodes!

16

Bluetooth Unpairing

Note: This procedure will put the SocketScan in discoverable mode.

Step 1 Unprn the scnner Delete the Bluetooth Prn

If the scanner is paired with a device, unpair it before trying to connect

to a different device.

a. Power on the scanner.

b. Press the trigger button then power button and hold both until you

hear 3 beeps.

The scanner will unpair and automatically power off. The next time you power

on the scanner, it will be discoverable.

Step 2 Remove or foret the scnner from the Bluetooth lst on the host

devce

Importnt: Both steps above must be done to complete the unpairing.

17

Factory Reset

Factory Reset will restore the scanner to Factory Default settings

(configured as shipped). If your scanner cannot scan the Factory Default

barcode below, then Follow the Fctor Reset (button) sequence

Scan the barcode below

Or follow the steps below to manually reset the scanner:

1. Turn ON the scanner.

2. Press and hold the trigger button1, then quickly press and release the

power button2, while continuing to hold the trigger button.

3.

4. Let go of trigger button after the scanner beeps once (after 15 seconds).

Five confirmation tones will sound from high to low tones and then the

scanner will turn OFF.

Note: If you follow this sequence, but release the trigger button too early

(before 15 seconds and the beep) the Factory Reset will have failed.

Qucl press

nd relese

the power

button

1

2

Power Button

Trer Button

18

Restore Method

NOTE: If your scanner remains in an unresponsive state after following

the Factory Reset, use the Restore Method as a last resort.

The Restore Method should be the lst ttempt used to revve n

unresponsve scnner It wll rentlze the core hrdwre

1. Make sure your scanner is OFF.

2. Press and hold the power button until the LED light goes on and off (about

15 seconds)

19

Top LED

Bluetooth LED Activity Meaning

Quick Blinking Blue(2

blinks every second)

Discoverable - waiting for a

host Bluetooth connection.

Slow Blinking Blue

(1 blink every second)

Scanner is attempting to

connect to the last known host

device.

After 1 minute of blinking,

scanner will stop searching.

Solid Blue Scanner connected

Side LED LED Activity Meaning

Blink Green Once Good Scan/Read

Side LED

Battery Status LED Activity Meaning

Connected

to power

Solid Red

(while charging) Charging the battery

Solid Green

(while charging) Battery is full

Not connected

to power No Light Battery capacity

above 20%

Blinking Red Battery capacity

below 20%

Status Indicators

20

Status Indicators

Beep Pttern Sound Menn

Low-High Tone Power On

High-Low Tone Power Off

High-High Tone Power Supply detected and scanner started

charging

1 Low Beep

Scanner has toggled on-screen keyboard or

keyboard toggle feature is enabled (iOS devices

only)

1 Beep Scanner connected to device and is ready to scan

barcodes

1 Beep Data successfully scanned

2 Beeps (same tone) Scanner disconnected

1 Long Beep Scanner gave up searching for a host

3 Beeps

(escalating tone)

Scanner has been reconfigured (the command

barcode was scanned successfully)

3 Beeps (escalating

tone followed by long

tone)

The command barcode did NOT work! (Verify if the

command barcode used is valid for your scanner

and try again)

ページを読み込んでいます...

Socket Mobile CX4039-3102 Linear Barcode Plus QR Code Scanner ユーザーガイド

Socket Mobile CX4039-3102 Linear Barcode Plus QR Code Scanner ユーザーガイド

他の言語で

関連論文

その他の書類